Cationic Gemini surfactant at the air/water interface

Effects of Different Concentrations of AmB on the Unsaturated Phospholipid-Cholesterol Membrane Using the Langmuir Monolayer and Liposome Models

Amphotericin B (AmB) causes toxicity to the erythrocyte membrane, leading to hemolysis, which limits the clinically effective dose for AmB intravenous therapy in invasive fungal infections. The molecular mechanism by which AmB adheres to the membrane of erythrocytes is the key factor in causing AmB to be toxic to the membrane of erythrocytes, but it is not yet fully understood; the mechanism by which AmB adheres to the liquid microdomains with higher fluidity formed by cholesterol and unsaturated phospholipids remains especially unclear. This study examined the adsorption of AmB at different concentrations, 5, 45, 85, and 125 μg/mL, on unsaturated phospholipid membranes containing 50 mol% cholesterol. The thermodynamic properties and structure of DOPC monolayers and DOPC/cholesterol mixed monolayers at different concentrations of AmB have been investigated using the Langmuir monolayer model and the BAM method. The impact of varying concentrations of AmB on the hydrophilic and hydrophobic domains of the DOPC bilayers and the DOPC/cholesterol mixed bilayers have also been discussed using large unilamellar vesicle liposomes and fluorescence techniques. It is shown that for AmB concentrations greater than 5 μg/mL, with an increase in AmB's concentration, the reorganization time for the DOPC/cholesterol monolayer increases, and the elastic modulus of the DOPC/cholesterol mixed monolayer decreases. In particular, when AmB's concentration is higher than 85 μg/mL, the liquid-condensed phase domains on the DOPC/cholesterol monolayer reduce significantly and the liquid-expanded phase domain enlarges from the BAM images. When the AmB concentration reaches 5 μg/mL, the disorder of the hydrophobic and hydrophilic domains of the DOPC/cholesterol bilayer increases as the AmB concentration increases. The way in which AmB interacts with the DOPC/cholesterol mixed membrane is related to the concentration of AmB. The higher the concentration of AmB, the more likely it is to remove cholesterol from the unsaturated phospholipid membrane. The results are helpful to understand the mechanism of AmB's toxicity to the erythrocyte's membrane, which has a guiding value for seeking ways to reduce the AmB's toxicity.

Effect of high sodium ion level on the interaction of AmB with a cholesterol-rich phospholipid monolayer

Invasive fungal infections are a primary reason for high mortality in immunocompromised people, especially in critically ill patients, such as intensive care unit (ICU) patients, advanced cancer patients, or severe burn patients. Hypernatremia also can increase mortality in severely ill patients. Amphotericin B (AmB) is the gold standard for treating infections, but in severely ill patients, AmB can cause hematotoxicity when administered intravenously due to its interaction with cholesterol on red blood cell membranes. This results in limited doses of AmB and affects the treatment of infections. The proportion of cholesterol molecules in membrane lipids in red blood cells is as high as 50 mol%, and the sodium ions can influence the interaction between AmB and lipids on the membrane. Therefore, in the complex clinical situation of a severely ill patient with a fungal infection and hypernatremia, the interaction between amphotericin B and the red blood cell membranes is worth studying in depth. In this work, the interaction between AmB and the dipalmitoyl phosphatidylcholine (DPPC)/cholesterol mixed monolayer in the presence of high sodium ion levels was studied when the proportion of cholesterol was 50%. The results show that the effect of AmB on reducing the monolayer's area at a high level of sodium ions is slightly stronger at 30 mN/m. The effect of AmB on reducing the elastic modulus of the DPPC/Chol monolayer is significantly weakened by a high sodium ion level, compared with the level of sodium ions at normal physiological concentration. The higher the sodium ion concentration, the weaker the intermolecular force of the DPPC/Chol/AmB mixed monolayers. The scanning electron microscope (SEM) and atomic force microscopy (AFM) observations suggest that at a high sodium ion level, the presence of AmB significantly reduces the surface roughness of the DPPC/Chol monolayer. AmB may bind to cholesterol molecules, and it isolates cholesterol from the monolayer, resulting in a reduced height of the cholesterol-rich monolayer and an increasingly dispersed monolayer region. The results are beneficial to understanding the mechanism of impact of a high sodium ion level on the relationship between AmB and red blood cell membranes rich in cholesterol and are valuable for understanding the hemolytic toxicity of AmB to red blood cells at a high sodium ion level.

Nanoscale Structure of Lipid-Gemini Surfactant Mixed Monolayers Resolved with AFM and KPFM Microscopy

Drug delivery vehicles composed of lipids and gemini surfactants (GS) are promising in gene therapy. Tuning the composition and properties of the delivery vehicle is important for the efficient load and delivery of DNA fragments (genes). In this paper, we studied novel gene delivery systems composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-dipalmitoyl-sn-3-phosphocholine (DPPC), and GS of the type N,N-bis(dimethylalkyl)-α,ω-alkanediammonium dibromide at different ratios. The nanoscale properties of the mixed DOPC-DPPC-GS monolayers on the surface of the gene delivery system were studied using atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). We demonstrate that lipid-GS mixed monolayers result in the formation of nanoscale domains that vary in size, height, and electrical surface potential. We show that the presence of GS can impart significant changes to the domain topography and electrical surface potential compared to monolayers composed of lipids alone.

Adsorption and Aggregation Behavior in Aqueous Solution of Tetrasiloxane-based Carboxylate Surfactants via "Thiol-ene" Photochemical Reaction

Anionic silicone surfactants have long been a neglected field. In this paper three anionic silicone surfactants were synthesized first time from dichloromethylvinylsilane through hydrolysis-condensation, "thiol-ene" photo- chemical and then salting reaction. The critical aggregate concentration (CAC), surface tension, minimum surface area per surfactant molecule and surface pressure at CAC were studied by both surface tension and electrical conductivity. The results showed that they had significant surface activity at the gas/liquid interface and were capable to reduce the surface tension of water to approximately 20 mN m-1 . The results of transmission electron microscopy showed that the three silicone surfactants self-assembled into spherical aggregates of uniform size in aqueous solution above the CAC. The dynamic light scattering results demonstrated that the size of the aggregates was determined to be in the range from 60 to 300 nm at 0.05 mol L-1 and the order of the size of the aggregates is (Me3 SiO)3 SiCO2 Li<(Me3 SiO)3 SiCO2 Na<(Me3 SiO)3 SiCO2 K.

Effect of Amphotericin B on the Thermodynamic Properties and Surface Morphology of the Pulmonary Surfactant Model Monolayer during Respiration

During the COVID-19 pandemic, the treatment of pulmonary fungal infection faced noteworthy challenges. Amphotericin B has shown promising therapeutic effects as an inhalation treatment for pulmonary fungal infections, especially those associated with the COVID-19 virus, due to its rare resistance. However, because the drug frequently produces renal toxicity, its effective dose is limited in clinical use. In this work, the DPPC/DPPG mixed monolayer was used as the pulmonary surfactant monolayer to study the interaction between amphotericin B and the pulmonary surfactant monolayer during inhalation therapy using the Langmuir technique and atomic force microscopy. The effects of different molar ratios of AmB on the thermodynamic properties and surface morphology of the pulmonary surfactant monolayer at different surface pressures was evaluated. The results showed that when the molar ratio of AmB to lipids in the pulmonary surfactant was less than 1:1, the main intermolecular force was attractive at a surface pressure greater than 10 mN/m. This drug had little effect on the phase transition point of the DPPC/DPPG monolayer, but decreased the height of the monolayer at 15 mN/m and 25 mN/m. When the molar ratio of AmB to lipids was greater than 1:1, the intermolecular force was mainly repulsive at a surface pressure greater than 15 mN/m, and AmB increased the height of the DPPC/DPPG monolayer at both 15 mN/m and 25 mN/m. These results are helpful in understanding the interaction between the pulmonary surfactant model monolayer and different doses of drugs at various surface tensions during respiration.

Effect of Trastuzumab on the thermodynamic behavior and roughness of fluid membrane using unsaturated phospholipid/cholesterol mixed monolayer model

The microenvironment near the receptor on biological membrane plays an important role in regulating drug-receptor interaction, and the interaction between drugs and lipids on membrane can also affect the microenvironment of membrane, which may affect drugs' efficacy or cause the drug resistance. Trastuzumab (Tmab) is a monoclonal antibody, used to treat early breast cancer associated with the overexpression of Human Epidermal growth factor Receptor 2 (HER2). But its effectiveness is limited due to its tendency to make tumor cells resistant to the drug. In this work, the monolayer mixed by unsaturated phospholipids (DOPC, DOPE and DOPS) and cholesterol were used as a model to simulate the fluid membrane region on biological membrane. The phospholipid/cholesterol mixed monolayers in molar ratio 7:3 and 1:1, were respectively used to simulate the one layer of simplified normal cell membrane and tumor cell membrane. The influence of this drug on the phase behavior, elastic modulus, intermolecular force, relaxation and the surface roughness of the unsaturated phospholipid/cholesterol monolayer was investigated. The results show that at 30 mN/m the increase or decrease of the elastic modulus and surface roughness of the mixed monolayer caused by Tamb depends on the type of phospholipid, but the intensity of the effect depends on the content of cholesterol, and the intensity of influence is more significant at the presence of 50% cholesterol. However, the effect of Tmab on the ordering of the DOPC/cholesterol or DOPS/cholesterol mixed monolayer is stronger when the content of cholesterol is 30%, but it was stronger for the DOPE/cholesterol mixed monolayer when the content of cholesterol is 50%. This study is helpful to understand the effects of anticancer drugs on microenvironment of cell membrane, and it has a certain reference value for the design of drug delivery system and drug target identification.

Influence of InP/ZnS Quantum Dots on Thermodynamic Properties and Morphology of the DPPC/DPPG Monolayers at Different Temperatures

In this work, the effects of InP/ZnS quantum dots modified with amino or carboxyl group on the characteristic parameters in phase behavior, elastic modulus, relaxation time of the DPPC/DPPG mixed monolayers are studied by the Langmuir technology at the temperature of 37, 40 and 45 °C. Additionally, the information on the morphology and height of monolayers are obtained by the Langmuir-Bloggett technique and atomic force microscope technique. The results suggest that the modification of the groups can reduce the compressibility of monolayers at a higher temperature, and the most significant effect is the role of the amino group. At a high temperature of 45 °C, the penetration ability of InP/ZnS-NH₂ quantum dots in the LC phase of the mixed monolayer is stronger. At 37 °C and 40 °C, there is no clear difference between the penetration ability of InP/ZnS-NH₂ quantum dots and InP/ZnS-COOH quantum dots. The InP/ZnS-NH₂ quantum dots can prolong the recombination of monolayers at 45 °C and accelerate it at 37 °C and 40 °C either in the LE phase or in the LC phase. However, the InP/ZnS-COOH quantum dots can accelerate it in the LE phase at all temperatures involved but only prolong it at 45 °C in the LC phase. This work provides support for understanding the effects of InP/ZnS nanoparticles on the structure and properties of cell membranes, which is useful for understanding the behavior about the ingestion of nanoparticles by cells and the cause of toxicity.

Effect of fluoxetine at different concentrations on the adsorption behavior of Langmuir monolayers

Fluoxetine (FLX), approved for the treatment of depression and anxiety by the FDA in 2002, is an amphiphilic antidepressant. In general, amphiphilic drugs have high membrane permeability. Therefore, the interactions between these drugs and monolayers have been widely concerned. In this study, the adsorption of FLX on dipalmitoylphosphatidylcholine (DPPC) monolayers at different concentrations and surface pressures have been investigated by pressure-area isotherms (π-A), adsorption curves, compression-expansion curves, and atomic force microscopy (AFM). Our data showed that the adsorption behavior was related to the surface pressures and FLX concentrations in the subphase. The FLX that was added in the subphase under lower surface pressure (π = 10 mN/m) was easily adsorbed on DPPC monolayers. The stability of the monolayers was strong. The adsorption of FLX on DPPC monolayers and the stability decreased when π = 20 mN/m. In addition, the adsorption behavior and stability increased with increasing FLX concentrations. The AFM images of the monolayers confirmed the results of fitted adsorption curves. This study will be critical to our understanding of the interactions between drugs and lipid monolayers.

Gemini quaternary ammonium compound PMT12-BF4 inhibits Candida albicans via regulating iron homeostasis

Quaternary ammonium compounds (QACs) are classified as cationic surfactants, and are known for their biocidal activity. However, their modes of action are thus far not completely understood. In this study, we synthesized a gemini QAC, PMT12-BF4 and found that it exerted unsurpassed broad-spectrum antifungal activity against drug susceptible and resistant Candida albicans, and other pathogenic fungi, with a minimal inhibitory concentration (MIC) at 1 or 2 μg/mL. These results indicated that PMT12-BF4 used a mode of action distinct from current antifungal drugs. In addition, fungal pathogens treated with PMT12-BF4 were not able to grow on fresh YPD agar plates, indicating that the effect of PMT12-BF4 was fungicidal, and the minimal fungicidal concentration (MFC) against C. albicans isolates was 1 or 2 μg/mL. The ability of yeast-to-hyphal transition and biofilm formation of C. albicans was disrupted by PMT12-BF4. To investigate the modes of action of PMT12-BF4 in C. albicans, we used an RNA sequencing approach and screened a C. albicans deletion mutant library to identify potential pathways affected by PMT12-BF4. Combining these two approaches with a spotting assay, we showed that the ability of PMT12-BF4 to inhibit C. albicans is potentially linked to iron ion homeostasis.

Adsorption behavior of DNA on phosphatidylcholine at the air-water interface

In this paper, the adsorption behavior of DNA on 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) mixed lipid monolayers had been studied at the air-water interface through the surface pressure-area curves (π-A), adsorption curves (π/π₀-t), excess mean area (∆A_exc), excess Gibbs free energy (∆G_ex) and the atomic force microscopy (AFM). π-A isotherms showed that the curves moved to larger mean molecular area after DNA added into subphase, however, the curves shifted to smaller mean molecular area when the concentration of DNA was higher than 1.2 μg/mL. The result of adsorption curves indicated that DNA molecules were spread by combining with polar head groups of lipids except the concentration of DNA was 0.4 μg/mL. ∆A_exc and ∆G_ex demonstrated that DNA enlarged the interval between DPPC and POPC, and the strongest position happened at the concentration of DNA was 1.2 μg/mL. These phenomena might be the steric hindrance between DNA molecules. Morphology of surface observed by AFM was agreement with the results above, which verified our conclusion from a more intuitive aspect. This work provides useful theoretical basis for the development of novel DNA delivery materials.

Cationic Gemini Surfactants with a Bipyridyl Spacer as Corrosion Inhibitors for Carbon Steel

In this work, cationic Gemini surfactants with different alkyl chain lengths (n = 8, 10, and 12) and a bipyridyl spacer were synthesized and tested as corrosion inhibitors for carbon steel in 1 M HCl solution. The corrosion inhibition efficiency was determined by weight loss measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy. Results showed that such three inhibitors could effectively inhibit the corrosion of carbon steel in 1 M HCl solution, especially at their low concentrations, while the carbon chain length of Geminis used played a negligible role in the inhibition efficiency. Scanning electron microscopy/energy dispersive X-ray analysis observations demonstrated the formation of a protective inhibitor layer on the carbon steel surface. Additionally, the adsorption of the inhibitor molecules on the carbon steel surface was found to obey the Langmuir isotherm.

pH-controlled crystal growth of copper/gemini surfactant complexes with bipyridine groups

pH-controlled crystal growth of two copper complexes with different coordination modes is successfully manipulated by means of pH adjustment.

Monolayer effect of a gemini surfactant with a rigid biphenyl spacer on its self-crystallization at the air/liquid interface

A gemini surfactant with a biphenyl spacer can spontaneously generate crystals at the air/solution interface. X-ray crystallography reveals that surfactant molecules exhibit an almost fully extended conformation with interdigitating alkyl chains, together with an approximate co-planarity of two C—C—C planes in two alkyl chains of one gemini molecule, and a prominent dihedral angle between the benzene rings and C—C—C planes of the alkyl chains. Infrared reflection–absorption spectroscopy shows that the gemini surfactant was stretched at the air/water interface, with the hydrocarbon chains oriented at a tilt angle of ∼75° with respect to the surface normal. In particular, the biphenyl group is more or less perpendicular to the water surface, and the C—C—C plane of the alkyl chain tends to be parallel to the water surface. Both results point out a remarkable similarity in the molecular conformation between the crystal and the monolayer. Meanwhile, dynamic light scattering and transmission electron microscopy results indicate that the crystallization of such gemini surfactants at the interface is contrary to the crystallization behavior in the bulk phase, meaning that the surfactant solution can only form a supersaturated solution as it is cooled, though the crystallization temperature of 296 K is lower than the Krafft temperature (∼303 K). Therefore, our findings indicate that the Gibbs monolayer of the gemini surfactant plays a critical role in its interfacial crystallization. Additionally, multiple weak intermolecular interactions, involving van der Waals interaction, π–π stacking and cationic–π interactions, as well as the hydrophobic effect during the aggregation of the gemini molecule in solution, are responsible for the formation of the interfacial crystal.

Amphiphilic properties of dumbbell-shaped inorganic-organic-inorganic molecular hybrid materials in solution and at an interface

Five novel dumbbell-shaped polyoxometalate (POM)-based inorganic-organic-inorganic molecular hybrids are investigated both in polar solvents and at interfaces for potential amphiphilic properties, which are compared with those of conventional surfactants. These hybrids with the general formula {P(2)V(3)W(15)}(2)-bis(TRIS)-linker are formed by linking two Wells-Dawson-type clusters, [P(2)V(3)W(15)O(62)](9-), with different linear bis(TRIS) linker ligands between the two TRIS moieties. Laser light scattering (LLS) studies reveal the presence of self-assembled vesicular structures in water/acetone mixed solvents, and the vesicle size increases with increasing acetone content, suggesting a charge-regulated process. The elastic constants, which are used to calculate the bending energy during vesicle formation, reveal that the organic ligands play an important role in determining the self-assembly process and that the hybrids do demonstrate amphiphilic behavior at the water/air interface. Furthermore, it is shown that some of the hybrids form monolayers at the interface, with an average molecular area that can be correlated with their organic linkers, as determined from their π-A isotherms. Finally, the hybrids not only display amphiphilic behavior akin to that of a surfactant but also exhibit an unusually high entropy contribution to vesicle formation as a result of their unique large, polar head groups, complex organic linkers, and their special molecular architectures as well as because of the involvement of the amphiphilic tetrabutylammonium (TBA) counterions.

Aggregation behavior of long-chain N-aryl imidazolium bromide in aqueous solution

The aggregation behavior of three long-chain N-aryl imidazolium ionic liquids (ILs), 1-(2,4,6-trimethylphenyl)-3-alkylimidazolium bromide [C(n)pim]Br (n = 10, 12, and 14), in aqueous solutions was systematically explored by surface tension, electrical conductivity, and (1)H NMR. A lower critical micelle concentration (cmc) for the N-aryl imidazolium ILs is observed compared with that for 1,3-dialkylimidazolium ILs [C(n)mim]Br, indicating that the incorporation of the 2,4,6-trimethylphenyl group into a headgroup favors micellization. The enhanced π-π interactions among the adjacent 2,4,6-trimethylphenyl groups weaken the steric hindrance of headgroups and thus lead to a dense arrangement of [C(n)pim]Br molecules at the air-water interface. An analysis of the (1)H NMR spectra revealed that the introduced 2,4,6-trimethylphenyl group may slightly bend into the hydrophobic regions upon micellization. The micelle formation process for [C(n)pim]Br (n = 10, 12, and 14) was found to be enthalpy-driven in the investigated temperature range, which is attributed to the strong electrostatic self-repulsion of the headgroups and the counterions as well as the π-π interactions among headgroups. Strong, stable fluorescence properties are presented by the new N-aryl imidazolium ILs, indicating their potential application in the field of photochemistry.

Influence of spacer of gemini on the interactions between cationic gemini surfactant and stearic acid in mixed monolayers

Mixed Langmuir-Blodgett (LB) films composed of a cationic gemini surfactant, [C(18)H(37)(CH(3))(2)N(+)-(CH(2))(s)-N(+)(CH(3))(2)C(18)H(37)],2Br(-) (18-s-18 with s = 3, 6, 8, 10 and 12), and a fatty acid of stearic acid (SA) were studied by the pi-A isotherm measurement, as well as by AFM and FT-IR. The analysis of the mean molecular area, the excess area and the excess Gibbs free energy from pi-A isotherms suggests the existence of attractive interactions between 18-s-18 and SA molecules in the mixed monolayers. The spacer group of 18-s-18 plays a very important role in the surface properties of 18-s-18/SA mixed monolayers. When s < or = 8, 18-s-18 and SA are completely miscible, while partially miscible mixed monolayers are presented when s > 8. Especially, in the latter case, when s = 12, phase separation appears in two composition regions of X(SA) = 0.4-0.75 and X(SA) = 0.75-0.85, respectively. This miscible phenomenon is confirmed by AFM observation. The result of FT-IR indicates that when X(SA) < or = 0.67, SA could ionize completely and form a "cationic-anionic surfactant" with 18-s-18 owing to the electrostatic interaction between the head groups, while when X(SA) > 0.67, SA only partially ionizes, -COO(-) and -COOH coexist in mixed monolayers.

Self-assembly of a triangle-shaped, hexaplatinum-incorporated, supramolecular amphiphile in solution and at interfaces

The self-assembly and characterization of a novel supramolecular amphiphile built from a new 60 degree amphiphilic precursor that incorporates hydrophilic platinum(II) metals and hydrophobic dioctadecyloxy chains is reported. The amphiphilic macrocycle and its precursor compound have been characterized by multinuclear NMR spectroscopy, ESI-MS, and other standard techniques. The coacervate morphology of the amphiphile at the liquid-liquid interface has been studied by using confocal optical microscopy and in situ Raman spectroscopy. The self-assembly of the amphiphilic macrocycle at the air-water interface has been investigated through Langmuir-trough techniques. The study indicates the possible formation of surface micelle-like aggregates. The disparity between the experimental molecular areas and those derived from molecular models support the idea of aggregation. AFM images of the surface aggregates show the formation of a flat topology with arbitrary ridgelike patterns. Reasonable molecular-packing arrangements are proposed to explain the molecular organization within the observed structures.

Synthesis and monolayer film of a series of new twin-tailed gemini cationic surfactants at the air/water interface

A series of new dimeric surfactants, twin-tailed gemini surfactants, 2(12)-s-2(12), were successfully prepared and characterized, and their monolayer films investigated by the measurement of surface pressure-area (π-A) and surface pressure-time (π-t) isotherms at the air/water interface by a Langmuir film balance. Compared to their monomeric counterparts, their collapse pressure (γcollapse) is smaller, whilst all the molecular area parameters are larger. The limited area (Alimited) and the initial area (Ainitial) of these twin-tailed gemini surfactants change with increasing spacer length s, and the surface pressure decreases with increasing time. It was also found that the higher the initial surface pressure, the larger the attenuation.

Comparison between inhomogeneous adsorption of charged surfactants on air-water and on solid-water interfaces by self-consistent field theory

We use a realistic molecular model to study the interfacial behavior of hydrocarbon sulfate surfactants within a self-consistent field model and consider the adsorption both at the air-water interface and at a hydrophobic solid-water interface. We focus on the structural properties of the hemimicelles at the critical interface aggregation concentration (CIAC) for the air-water system and the critical surface aggregation concentration (CSAC) for the solid-water system. The major difference between the two systems is that the liquid interface is penetrable but the solid surface is intrinsically impenetrable for the molecular species. At the LG interface the hemimicelles have a lens shape with their centers of mass positioned slightly toward the aqueous side and feature an aspect ratio of approximately 2, with the long dimension parallel to the interface. Hemimicelle formation occurs below a critical (interfacial) area per molecule and above a critical surface pressure depending on tail length and ionic strength. Hemimicelles are not expected at air-water interfaces for a surfactant with a tail length ( t) lower than 15 CH2 units. In contrast, at a hydrophobic solid the formation of laterally inhomogeneous micelles even takes place for surfactants with the tail length as short as t = 12. This difference is attributed to the screening of the lateral interactions in the vapor phase. The shape of surface hemimicelles is caplike (or half-lens) with an aspect ratio lower than 2 and the long dimension parallel to the solid surface. The tail length, the ionic strength, the adsorption energies, and the surfactant concentration have an effect on the surface micelle properties such as the aggregation number and size and shape.