Comparative structure analysis of non-polar organic ferrofluids stabilized by saturated mono-carboxylic acids

Effect of an excess of surfactant on thermophoresis, mass diffusion and viscosity in an oily surfactant-stabilized ferrofluid

The effect of an excess of surfactant on the thermophoresis of a sterically stabilized ferrofluid is investigated experimentally by forced Rayleigh scattering (FRS). The experiments are performed with a stable magnetic fluid sample to which controlled amounts of surfactant are added. A decrease in the thermally induced transport of magnetic nanoparticles is observed while increasing the temperature T. The positive Soret coefficient [Formula: see text] decreases by adding 2 vol% of surfactant at room temperature. As shown by FRS relaxation, this decreasing is mainly associated with a reduction of the interaction between the carrier fluid and individual nanoparticles. No significant effect of extra surfactant on the sign of [Formula: see text] is observed at higher T's (up to [Formula: see text]C). Dynamic light scattering at room temperature reveals the presence of a small amount of clusters/aggregates in the samples, which are hardly detectable by FRS relaxation. The presence of these small clusters/aggregates is confirmed by a rheological probing of the fluid properties. Whatever T, a small amount of added surfactant first causes a decrease of the ferrofluid viscosity, associated with a 10% decreasing of the flow activation energy. Further on, viscosity and activation energy both recover at higher excess surfactant concentrations. These results are analyzed in terms of saturation of the surfactant layer, concentration of free surfactant chains and heat of transport of the nanoparticles.

Ferrofluids and bio-ferrofluids: looking back and stepping forward

Ferrofluids investigated along for about five decades are ultrastable colloidal suspensions of magnetic nanoparticles, which manifest simultaneously fluid and magnetic properties. Their magnetically controllable and tunable feature proved to be from the beginning an extremely fertile ground for a wide range of engineering applications. More recently, biocompatible ferrofluids attracted huge interest and produced a considerable increase of the applicative potential in nanomedicine, biotechnology and environmental protection. This paper offers a brief overview of the most relevant early results and a comprehensive description of recent achievements in ferrofluid synthesis, advanced characterization, as well as the governing equations of ferrohydrodynamics, the most important interfacial phenomena and the flow properties. Finally, it provides an overview of recent advances in tunable and adaptive multifunctional materials derived from ferrofluids and a detailed presentation of the recent progress of applications in the field of sensors and actuators, ferrofluid-driven assembly and manipulation, droplet technology, including droplet generation and control, mechanical actuation, liquid computing and robotics.

High performance magnetorheological fluids: very high magnetization FeCo-Fe3O4 nanoclusters in a ferrofluid carrier

High magnetization Fe₃O₄/OA-FeCo/Al₂O₃ nanocomposite magnetic clusters have been obtained using a modified oil-in-water miniemulsion method. These nanocomposite clusters dispersed in a ferrofluid carrier result in a magnetorheological fluid with improved characteristics. The magnetic clusters have a magnetic core consisting of a mixture of magnetite nanoparticles of about 6 nm average size, stabilized with oleic acid (Fe₃O₄/OA) and FeCo/Al₂O₃ particles of about 50 nm average size, compactly packed in the form of spherical clusters with a diameter distribution in the range 100-300 nm and a hydrophilic coating of sodium lauryl sulphate surfactant. The surface chemical composition of the Fe₃O₄/OA-FeCo/Al₂O₃ clusters investigated by XPS indicates the presence of the Co²⁺ and Co³⁺ oxidation states of cobalt and the components of Fe²⁺ and Fe³⁺ characteristic to both an enhanced oxidation state at the surface of the FeCo particles and to the presence of magnetic nanoparticles of spinel structure which are decorating the supporting FeCo. This specific decorating morphology is also indicated by TEM images. Advanced characterization of the Fe₃O₄/OA-FeCo/Al₂O₃ magnetic clusters has been performed using Mössbauer spectroscopy and magnetization measurements at various temperatures between 6 K and 200 K. The unexpected formation of Co ferrite decorating nanoparticles was supported by Mössbauer spectroscopy. The dispersion of magnetic clusters in the ferrofluid carrier highly influences the flow properties in the absence of the field (shear thinning for low and moderate shear rates) and especially in applied magnetic field, when significant magnetoviscous effect and shear thinning was observed for the whole range of shear rate values. Detailed analysis of the magnetorheological behavior of the nanocomposite magnetic clusters dispersed in a ferrofluid carrier evidence significantly higher normalized dynamic yield stress values in comparison with the magnetite nanocluster suspensions of the same mass concentration, a promising result for this new type of nanocomposite magnetorheological fluid.

Superparamagnetic electrospun microrods for magnetically-guided pulmonary drug delivery with magnetic heating

Controlled pulmonary drug delivery systems employing non-spherical particles as drug carriers attract considerable attention nowadays. Such anisotropic morphologies may travel deeper into the lung airways, thus enabling the efficient accumulation of therapeutic compounds at the point of interest and subsequently their sustained release. This study focuses on the fabrication of electrospun superparamagnetic polymer-based biodegradable microrods consisting of poly(l-lactide) (PLLA), polyethylene oxide (PEO) and oleic acid-coated magnetite nanoparticles (OA·Fe₃O₄). The production of magnetite-free (0% wt. OA·Fe₃O₄) and magnetite-loaded (50% and 70% wt. Fe₃O₄) microrods was realized upon subjecting the as-prepared electrospun fibers to UV irradiation, followed by sonication. Moreover, drug-loaded microrods were fabricated incorporating methyl 4-hydroxybenzoate (MHB) as a model pharmaceutical compound and the drug release profile from both, the drug-loaded membranes and the corresponding microrods was investigated in aqueous media. In addition, the magnetic properties of the produced materials were exploited for remote induction of hyperthermia under AC magnetic field, while the possibility to reduce transport losses and enhance the targeted delivery to lower airways by manipulation of the airborne microrods by DC magnetic field was also demonstrated.

Mechanism of magnetization reduction in iron oxide nanoparticles

Iron oxide nanoparticles are presently considered as main work horses for various applications including targeted drug delivery and magnetic hyperthermia. Several questions remain unsolved regarding the effect of size onto their overall magnetic behavior. One aspect is the reduction of magnetization compared to bulk samples. A detailed understanding of the underlying mechanisms of this reduction could improve the particle performance in applications. Here we use a number of complementary experimental techniques including neutron scattering and synchrotron X-ray diffraction to arrive at a consistent conclusion. We confirm the observation from previous studies of a reduced saturation magnetization and argue that this reduction is mainly associated with the presence of antiphase boundaries, which are observed directly using high-resolution transmission electron microscopy and indirectly via an anisotropic peak broadening in X-ray diffraction patterns. Additionally small-angle neutron scattering with polarized neutrons revealed a small non-magnetic surface layer, that is, however, not sufficient to explain the observed loss in magnetization alone.

Influence of Surface Treatment on Magnetic Properties of Fe3O4 Nanoparticles Synthesized by Electrochemical Method

The changes of magnetic properties in magnetite nanoparticles during two different stabilization processes were investigated. Magnetic nanoparticles (MNPs) were obtained by electrochemical synthesis from two kinds of salts: (CH3)4NCl and NaCl. After that, two methods-steric and electrostatic-were used to stabilize MNPs with oleic acid (OA) and sodium hydroxide (NaOH), respectively. As a consequence, aqueous and organic dispersions were obtained after surface modification. The coated nanoparticles were characterized by TEM, zeta potential, thermogravimetry analysis (TGA), cyclic voltammetry (CV), magnetization measurements, and infrared and Mössbauer spectroscopy. The results showed that the particles were between 8 and 13 nm in size. In addition, the MNPs were coated with negative charge layers from NaOH by physisorption and coated with carboxylate groups from OA by the chemisorption process, and hence, they exhibited different reactivity and behavior depending on the nature of the electrolyte used in the electrochemical synthesis. Furthermore, the uncoated and coated MNPs had a narrow size distribution. Additionally, the saturation magnetization values showed dependence on the magnetite synthesis conditions and surface modifiers.

Antifungal Activity of Amphotericin B Conjugated to Nanosized Magnetite in the Treatment of Paracoccidioidomycosis

This study reports on in vitro and in vivo tests that sought to assess the antifungal activity of a newly developed magnetic carrier system comprising amphotericin B loaded onto the surface of pre-coated (with a double-layer of lauric acid) magnetite nanoparticles. The in vitro tests compared two drugs; i.e., this newly developed form and free amphotericin B. We found that this nanocomplex exhibited antifungal activity without cytotoxicity to human urinary cells and with low cytotoxicity to peritoneal macrophages. We also evaluated the efficacy of the nanocomplex in experimental paracoccidioidomycosis. BALB/c mice were intratracheally infected with Paracoccidioides brasiliensis and treated with the compound for 30 or 60 days beginning the day after infection. The newly developed amphotericin B coupled with magnetic nanoparticles was effective against experimental paracoccidioidomycosis, and it did not induce clinical, biochemical or histopathological alterations. The nanocomplex also did not induce genotoxic effects in bone marrow cells. Therefore, it is reasonable to believe that amphotericin B coupled to magnetic nanoparticles and stabilized with bilayer lauric acid is a promising nanotool for the treatment of the experimental paracoccidioidomycosis because it exhibited antifungal activity that was similar to that of free amphotericin B, did not induce adverse effects in therapeutic doses and allowed for a reduction in the number of applications.

Lung fungal infections are caused by pathogens inhaled as spores which convert into invasive yeast forms in the lungs. This type of infection can spread to other sites in the body through the blood and lymphatic systems, sometimes leading to ulcerations and skin lesions. The drug of choice for treatment is Amphotericin B (AmB). AmB is a typical polyene with broad-spectrum antifungal activity that encounters some use limitations because of its side effects. We developed a magnetic carrier nanocomplex comprising of amphotericin B loaded onto the surface of magnetite nanoparticles pre-coated with a double-layer of lauric acid. We evaluated this approach for its antifungal activity against Paracoccidioides brasiliensis (strain Pb18) and its cytotoxicity in mammalian cell culture. We found that this nanocomplex exhibited antifungal activity without cytotoxicity to human urinary cells and low cytotoxicity to peritoneal macrophages. In vivo, the nanocomplex did not induce genotoxic effects in bone marrow cells and was effective against experimental paracoccidioidomycosis without inducing clinical, biochemical or histopathological alterations.

Evaluation of electrospun polymer–Fe3O4nanocomposite mats in malachite green adsorption

Magnetoactive polymer-based electrospun fibers containing Fe₃O₄nanoparticles, were successfully employed as adsorbents for malachite green oxalate in aqueous media.

Effect of the solute–solvent interface on small-angle neutron scattering from organic solutions of short alkyl chain molecules as revealed by molecular dynamics simulation

The problem of describing the experimental small-angle neutron scattering (SANS) from diluted solutions of saturated monocarboxylic acids with short chain lengths (myristic and stearic acids) in deuterated decalin is considered. The method of classical molecular dynamics simulation (MDS) is used to obtain the atomic number density distributions, and, as a consequence, the scattering length density (SLD) distribution in the solute–solvent interface area (about 1 nm around the acid molecules), assuming the acid molecules to be rigid and non-associated in the solutions. MDS is performed for solutions in a parallelepiped cell of 5.5 × 5.3 × 5.3 nm (one acid molecule per cell) under normal conditions. The time averaging of the obtained distributions is done over 2 ns (after the system thermalization). It is shown that a specific short-range ordering organization of the solvent molecules in the vicinity of the acid molecules has a significant effect on the scattering, which is mainly determined by a relatively large ratio between the effective size of the solvent molecule and the cross-section diameter of the acid molecule. Various approximations to the simulated SLD distributions, based on the cylinder-type symmetry of the acid molecules, are probed to achieve the best consistency with the experimental SANS curves by varying the residual incoherent background.

Relationships between molecular structure and kinetic and thermodynamic controls in lipid systems. Part I: propensity for oil loss of saturated triacylglycerols

Pure saturated triacylglycerols (TAGs) in canola oil were used as model systems to analyse oil loss in structured oil both from thermodynamic and kinetic perspectives. Two important parameters which effectively and predictively measure the relative propensity of a solid network to lose/hold oil were defined: (1) the rate of oil loss, K, which is a quantified representation of the kinetics of oil loss and (2) the initial amount of oil susceptible to be lost, i.e., the propensity for oil loss (POL), which is a representation of the thermodynamics of oil binding. It was found that the POL and K values do not always trend in the same fashion, suggesting that the mechanism of oil binding is complex, depending on the structurant's crystalline form locked within the oil network. The two parameters were, however, correlated to the melting and thermal behavior of the structurants, to the polymorphic structures that are obtained during the cooling process and to the habit (shape, size and morphology) of the crystalline phase in the oil. Both POL and K had a strong correlation to the oil loss.

Multiresponsive polymer conetworks capable of responding to changes in pH, temperature, and magnetic field: synthesis, characterization, and evaluation of their ability for controlled uptake and release of solutes

This study deals with the preparation of novel multiresponsive (magnetoresponsive, thermoresponsive and pH-responsive) nanocomposite conetworks consisting of oleic acid-coated magnetite nanoparticles (OA·Fe(3)O(4)), hydrophilic/thermoresponsive hexa(ethylene glycol) methyl ether methacrylate (HEGMA), hydrophobic/metal binding 2-(acetoacetoxy)ethyl methacrylate (AEMA), and pH-responsive/thermoresponsive N-diethylaminoethyl methacrylate (DEAEMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) moieties. Conventional free radical copolymerization was employed for the synthesis of random conetworks in the absence and presence of preformed OA·Fe(3)O(4). Further, in characterization of these materials in regards to their swelling behavior in organic and aqueous solvents, thermal/thermoresponsive properties, and composition, assessment of their magnetic characteristics disclosed tunable superparamagnetic behavior. These systems were also evaluated toward their ability to adsorb and release a solute (benzoic acid) in a controlled manner upon varying the pH.

The influence of particle clustering on the rheological properties of highly concentrated magnetic nanofluids

In this paper the particle volume fraction and temperature dependence of the dynamic viscosity of highly concentrated transformer oil based magnetic nanofluids was investigated in the absence of an external magnetic field. The solid particle volume fraction dependence of the relative viscosity was found to be very well fitted by the Krieger-Dougherty formula, whence the mean ellipticity of the colloidal particles and the effective surfactant layer thickness were obtained. Using the information on the particles' size and shape statistics obtained from TEM, DLS and magnetogranulometry investigations, it was concluded that the magnetite nanoparticles agglomerate in small clusters of about 1.3 particles/cluster, due to the van der Waals interactions. The effective thickness of the oleic acid surfactant layer was estimated as about 1.4 nm, in very good agreement with the value resulted from previous SANS investigations.

Structure of water-based ferrofluids with sodium oleate and polyethylene glycol stabilization by small-angle neutron scattering: contrast-variation experiments

Contrast variation in small-angle neutron scattering (SANS) experiments is used to compare the structures of a water-based ferrofluid, where magnetite nanoparticles are stabilized by sodium oleate, and its mixture with biocompatible polyethylene glycol, PEG. The basic functions approach is applied, which takes into account the effects of polydispersity and magnetic scattering. Different types of stable aggregates of colloidal particles are revealed in both fluids. The addition of PEG results in a reorganization of the structure of the aggregates: the initial comparatively small and compact aggregates (about 40 nm in size) are replaced by large (more than 120 nm in size) fractal-type structures. It is postulated that these large structures are composed of single magnetite particles coated with PEG, which replaces sodium oleate. Micelle formation involving free sodium oleate is observed in both fluids. The structures of the fluids remain unchanged with increasing temperature up to 343 K. New and specific possibilities of SANS contrast variation with respect to multicomponent systems with different aggregates are considered.

Structure and in vitro biological testing of water-based ferrofluids stabilized by monocarboxylic acids

Water-based ferrofluids (magnetic fluids) with double-layer steric stabilization by short monocarboxylic acids (lauric and myristic acids) are considered to be a potential source of magnetic nanoparticles in brain cancer (glioblastoma) treatment. Structure characterization in the absence of an external magnetic field is performed, including transmission electron microscopy, magnetization analysis, and small-angle neutron scattering with contrast variation. It is shown that despite the good stability of the systems a significant part of the magnetite nanoparticles are in aggregates, whose inner structure depends on the stabilizer used. In particular, an incomplete coating of magnetite particles is concluded in the case of myristic acid stabilization. The ferrofluids keep their structure unchanged when added to the cancer cell medium. The intracellular accumulations of magnetite from the ferrofluids added to cancer cell cultures as well as its cytotoxicity with respect to human brain cells are investigated.