Rhamnolipid CMC prediction

Microbe cultivation guidelines to optimize rhamnolipid applications

In the growing landscape of interest in natural surfactants, selecting the appropriate one for specific applications remains challenging. The extensive, yet often unsystematized, knowledge of microbial surfactants, predominantly represented by rhamnolipids (RLs), typically does not translate beyond the conditions presented in scientific publications. This limitation stems from the numerous variables and their interdependencies that characterize microbial surfactant production. We hypothesized that a computational recipe for biosynthesizing RLs with targeted applicational properties could be developed from existing literature and experimental data. We amassed literature data on RL biosynthesis and micellar solubilization and augmented it with our experimental results on the solubilization of triglycerides (TGs), a topic underrepresented in current literature. Utilizing this data, we constructed mathematical models that can predict RL characteristics and solubilization efficiency, represented as logPRL = f(carbon and nitrogen source, parameters of biosynthesis) and logMSR = f(solubilizate, rhamnolipid (e.g. logPRL), parameters of solubilization), respectively. The models, characterized by robust R2 values of respectively 0.581-0.997 and 0.804, enabled the ranking of descriptors based on their significance and impact-positive or negative-on the predicted values. These models have been translated into ready-to-use calculators, tools designed to streamline the selection process for identifying a biosurfactant optimally suited for intended applications.

Micellar and solubilizing properties of rhamnolipids

We studied the micellar and solubilizing properties of aqueous solutions of unfractionated rhamnolipids produced by Pseudomonas aeruginosa. We used nuclear magnetic resonance (NMR) diffusometry, dynamic light scattering, and conductometry to measure the critical micelle concentration (CMC) of rhamnolipid solutions and determined the effective hydrodynamic radii of rhamnolipid monomers and micelles. Based on selective measurements of the self-diffusion coefficients of molecules, performed by NMR diffusometry, the solubilizing properties of rhamnolipids were studied depending on their concentration in solution; aromatic hydrocarbons, benzene, toluene, ethylbenzene, and para-xylene were taken as solubilizates. On the basis of the measurement results, we estimated the distribution coefficient of the solubilizate between the micellar (solubilized) and free (in the aqueous phase) states and the solubilizing capacity of rhamnolipid micelles.

Basic principles for biosurfactant-assisted (bio)remediation of soils contaminated by heavy metals and petroleum hydrocarbons - A critical evaluation of the performance of rhamnolipids

Despite the fact that rhamnolipids are among the most studied biosurfactants, there are still several gaps which must be filled. The aim of this review is to emphasize and to indicate which issues should be taken into account in order to achieve efficient rhamnolipids-assisted biodegradation or phytoextraction of soils contaminated by heavy metals and petroleum hydrocarbons without harmful side effects. Four main topics have been elucidated in the review: effective concentration of rhamnolipids in soil, their potential phytotoxicity, susceptibility to biodegradation and interaction with soil microorganisms. The discussed elements are often closely associated and often overlap, thus making the interpretation of research results all the more challenging. Each dedicated section of this review includes a description of potential issues and questions, an explanation of the background and rationale for each problem, analysis of relevant literature reports and a short summary with possible application guidelines. The main conclusion is that there is a necessity to establish regulations regarding effective concentrations for rhamnolipids-assisted remediation of soil. The use of an improper concentration is the direct cause of all the other discussed phenomena.

Microbial conversion of agro-processing waste (peanut meal) to rhamnolipid by Pseudomonas aeruginosa: solid-state fermentation, water extraction, medium optimization and potential applications

The high cost and severe foam in rhamnolipid fermentation are still bottlenecks for its industrial production and application. Non-foaming production of rhamnolipid by Pseudomonas aeruginosa FA1 was explored in solid-state fermentation using the agro-processing waste (peanut meal) as low-cost substrate. An environmental-friendly extraction method was developed to harvest rhamnolipid from solid-state culture. Strain FA1 produced 265.4 ± 8.2 mg rhamnolipid using 10 g peanut meal. HPLC-MS results revealed that 7 rhamnolipid homologues were produced, mainly including Rha-C₈-C₁₀ and Rha-Rha-C₁₀-C₁₀. Nitrate was the optimal nitrogen source. Peanut meal, MgSO₄ and CaCl₂ were significant factors for rhamnolipid production in solid-state fermentation. Rhamnolipid production was enhanced 31 % using the solid-state medium optimized by response surface method. The produced rhamnolipid reduced water surface tension to 28.1 ± 0.2 mN/m with a critical micelle concentration of 70 mg/L. The crude oil was emulsified with an emulsification index of 75.56 ± 1.29 %. The growth of tested bacteria and fungi was inhibited.

Limited Role of Rhamnolipids on Cadmium Resistance for an Endogenous-Secretion Bacterium

Rhamnolipids, a type of biosurfactant, represent a potential strategy for both enhancing organismic resistance and in situ remediation of heavy metals contaminations. In-depth study of the mechanism of rhamnolipids synthesis in response to heavy metals stress, is indispensable for a wide use of biosurfactant-secreting microbes in bioremediation. In this study, we employed the wild-type and the rhlAB deficient strain (ΔrhlAB) of Pseudomonas aeruginosa, a prototypal rhamnolipids-producing soil microorganism, to investigate its responses to cadmium resistance based on its physicochemical, and physiological properties. Compared with the wild-type strain, the ΔrhlAB were more sensitive to Cd-stress at low Cd concentration (<50 mg/L), whereas there was little difference in sensitivity at higher Cd concentrations, as shown by spot titers and cell viability assays. Secreted rhamnolipids reduced intracellular Cd²⁺ accumulation to alleviate Cd²⁺ stress, whereas endogenous rhamnolipids played a limited role in alleviating Cd²⁺ stress. Synthesized rhamnolipids exhibited a higher critical micelle concentration (CMC) (674.1 mg/L) and lower emulsification index (4.7%) under high Cd-stress, while these parameters showed no obvious changes. High Cd-stress resulted in high hydrophilic wild-type bacterial surface and lower bioremediation ability. This study could advance a deeper understanding of the mechanism of cadmium resistance and provide a theoretical foundation for the application of biosurfactant and biosurfactant-secreted bacterium in contaminant bioremediation.

Rhamnolipid Micellization and Adsorption Properties

Biosurfactants are naturally occurring amphiphiles that are being actively pursued as alternatives to synthetic surfactants in cleaning, personal care, and cosmetic products. On the basis of their ability to mobilize and disperse hydrocarbons, biosurfactants are also involved in the bioremediation of oil spills. Rhamnolipids are low molecular weight glycolipid biosurfactants that consist of a mono- or di-rhamnose head group and a hydrocarbon fatty acid chain. We examine here the micellization of purified mono-rhamnolipids and di-rhamnolipids in aqueous solutions and their adsorption on model solid surfaces. Rhamnolipid micellization in water is endothermic; the CMC (critical micellization concentration) of di-rhamnolipid is lower than that of mono-rhamnolipid, and both CMCs decrease upon NaCl addition. Rhamnolipid adsorption on gold surface is mostly reversible and the adsorbed layer is rigid. A better understanding of biosurfactant self-assembly and adsorption properties is important for their utilization in consumer products and environmental applications.

Precipitation of calcium carbonate in the presence of rhamnolipids in alginate hydrogels as a model of biomineralization

This paper reports the effects of rhamnolipids presence in the alginate hydrogel and CO₃^2- solution, on the precipitation of CaCO₃ in the Ca²⁺ loaded alginate hydrogel. Characteristics of the formed particles are discussed. Model conditions containing alginate hydrogel and rhamnolipids were used in order to mimic the natural environment of biomineralization in biofilms. It has been shown that rhamnolipids affect the characteristics of precipitated calcium carbonate effect of using these biosurfactants depends on their concentration as well as whether they are directly present in the hydrogel matrix or the carbonate solution surrounding the hydrogel. The greatest effect compared to the control samples was found for the rhamnolipids in the form of micelles directly present in the hydrogel with the CaCl₂ cross-linked solution at concentration of 0.05 M. These conditions result in the highest increase in vaterite content, specific surface area, and pore volume. The mechanism of CaCO₃ precipitation in alginate hydrogel containing rhamnolipids has been proposed.

Synthetic and Natural Surfactants for Potential Application in Mobilization of Organic Contaminants: Characterization and Batch Study

In this paper, we investigated the abilities of five sugar-based synthetic surfactants and biosurfactants from three different families (i.e., alkyl polyglycoside (APG), sophorolipid (SL), and rhamnolipid (RL)) to dissolve and mobilize non-aqueous phase liquid (NAPL) components, i.e., toluene and perchloroethylene (PCE), adsorbed on porous matrices. The objective of this study was to establish a benchmark for the selection of suitable surfactants for the flushing aquifer remediation technique. The study involved a physicochemical characterization of the surfactants to determine the critical micelle concentration (CMCs) and interfacial properties. Subsequently, a batch study, through the construction of adsorption isotherms, made it possible to evaluate the surfactants’ capacities in contaminant mobilization via the reduction of their adsorptions onto a reference adsorbent material, a pine wood biochar (PWB). The results indicate that a synthetic surfactant from the APG family with a long fatty acid chain and a di-rhamnolipid biosurfactant with a shorter hydrophobic group offered the highest efficiency values; they reduced water surface tension by up to 54.7% and 52%, respectively. These two surfactants had very low critical micelle concentrations (CMCs), 0.0071 wt% and 0.0173 wt%, respectively; this is critical from an economical point of view. The batch experiments showed that these two surfactants, at concentrations just five times their CMCs, were able to reduce the adsorption of toluene on PWB by up to 74% and 65%, and of PCE with APG and RL by up to 65% and 86%, respectively. In general, these results clearly suggest the possibility of using these two surfactants in surfactant-enhanced aquifer remediation technology.

Comparative study on interfacial and foaming properties of glycolipids in relation to the gas applied for foam generation

Glycolipids are biosurfactants with a wide range of structural diversity. They are biodegradable, based on renewables, ecocompatible and exhibit high surface activity. Still, studies comparing glycolipids and conventional surfactants in terms of interfacial properties and foaming performance are lacking. Here, we compared interfacial and foaming properties of microbial and enzymatically synthesized glycolipids to those of the widely-used, conventional surfactant sodium dodecyl sulfate (SDS). The enzymatically produced sorbose monodecanoate, as well as microbially produced di-rhamno-di-lipids exhibited high foam stabilizing properties, similar to those of SDS. However, sophorolipid and mono-rhamno-di-lipids did not produce metastable foams. An appropriate selection of head and tail groups depending on the application of interest is therefore necessary. Then, glycolipids can serve as an ecofriendly and efficient alternative to petroleum-based surfactants, even at substantially lower concentrations than e.g. SDS. Moreover, the influence of three foaming gases on the foaming properties of the glycolipids was evaluated. Slightly higher foam stability and lower coarsening rates were determined for sorbose monodecanoate when using nitrogen as the foaming gas instead of air. Foams generated with carbon dioxide were not metastable, no matter which surfactant was used.

Rhamnolipids as Effective Green Agents in the Destabilisation of Dolomite Suspension

In this paper, we describe an application of mono- and dirhamnolipid homologue mixtures of a biosurfactant as a green agent for destabilisation of a dolomite suspension. Properties of the biosurfactant solution were characterised using surface tension and aggregate measurements to prove aggregation of rhamnolipids at concentrations much lower than the critical micelle concentration. Based on this information, the adsorption process of biosurfactant molecules on the surface of the carbonate mineral dolomite was investigated, and the adsorption mechanism was proposed. The stability of the dolomite suspension after rhamnolipid adsorption was investigated by turbidimetry. The critical concentration of rhamnolipid at which destabilisation of the suspension occurred most effectively was found to be 50 mg·dm-3. By analysing backscattering profiles, solid-phase migration velocities were calculated. With different amounts of biomolecules, this parameter can be modified from 6.66 to 20.29 mm·h-1. Our study indicates that the dolomite suspension is destabilised by hydrophobic coagulation, which was proved by examining the wetting angle of the mineral surface using the captive bubble technique. The relatively low amount of biosurfactant used to destabilise the system indicates the potential application of this technology for water treatment or modification of the hydrophobicity of mineral surfaces in mineral engineering.

Enhanced removal of hydrophobic volatile organic compounds in biofilters and biotrickling filters: A review on the use of surfactants and the addition of hydrophilic compounds

The use of biological reactors to remove volatile organic compounds (VOCs) from waste gas streams has proven to be a cost-effective and sustainable technique. However, hydrophobic VOCs exhibit low removal, mainly due to their limited bioavailability for the microorganisms. Different strategies to enhance their removal in bio(trickling)filters have been developed with promising results. In this review, two strategies, i.e. the use of surfactants and hydrophilic compounds, for enhancing the removal of hydrophobic VOCs in bio(trickling)filters are discussed. The complexity of the processes and mechanisms behind both strategies are addressed to fully understand and exploit their potential and rapid implementation at full-scale. Mass transfer and biological aspects are discussed for each strategy, and an in-depth comparison between studies carried out over the last two decades has been performed. This review identifies additional strategies to further improve the application of (bio)surfactants and/or hydrophilic VOCs, and it provides recommendations for future studies in this field.

Effect of synthetic surfactants on the environment and the potential for substitution by biosurfactants

The environmental impacts of the use of synthetic surfactants are discussed in this work such as their high levels of toxicity and low biodegradability. These materials destroy aquatic microbial populations, damage fish and other aquatic life, and reduce photochemical energy conversion efficiency of plants as well as adversely affecting waste-water treatment processes. With global usage of surfactants being over 15 million tonnes annually, and an estimated 60% of surfactant ending up in the aquatic environment, there is an urgent need for alternatives with lower adverse environmental effects; this review explores biosurfactants as potential alternatives. The sources and natural function of biosurfactants are presented, together with their advantages compared with their synthetic counterparts, including their low toxicity and biodegradability. Their comparable effectiveness as surfactants has been demonstrated by surface tension reduction, achieved at much lower critical micelle concentrations that those of synthetic surfactants. The limitations and challenges for the use of biosurfactants are discussed, particularly low production yields; such limitations must be addressed before wide range industrial use of biosurfactants can be achieved. Although there has been focus on achieving greater production yields, a remaining issue is the lack of research into the use of biosurfactants in a greater range of industrial and consumer applications to demonstrate their efficacy and identify candidate biosurfactants for production. This review highlights such research as deserving of further investigation, alongside the ongoing work to optimize the production process.

Towards Rational Biosurfactant Design-Predicting Solubilization in Rhamnolipid Solutions

The efficiency of micellar solubilization is dictated inter alia by the properties of the solubilizate, the type of surfactant, and environmental conditions of the process. We, therefore, hypothesized that using the descriptors of the aforementioned features we can predict the solubilization efficiency, expressed as molar solubilization ratio (MSR). In other words, we aimed at creating a model to find the optimal surfactant and environmental conditions in order to solubilize the substance of interest (oil, drug, etc.). We focused specifically on the solubilization in biosurfactant solutions. We collected data from literature covering the last 38 years and supplemented them with our experimental data for different biosurfactant preparations. Evolutionary algorithm (EA) and kernel support vector machines (KSVM) were used to create predictive relationships. The descriptors of biosurfactant (logP_BS, measure of purity), solubilizate (logP_sol, molecular volume), and descriptors of conditions of the measurement (T and pH) were used for modelling. We have shown that the MSR can be successfully predicted using EAs, with a mean R² _val of 0.773 ± 0.052. The parameters influencing the solubilization efficiency were ranked upon their significance. This represents the first attempt in literature to predict the MSR with the MSR calculator delivered as a result of our research.

Structural and Physicochemical Characterization of Rhamnolipids produced by Pseudomonas aeruginosa P6

Rhamnolipids are important biosurfactants for application in bioremediation, enhanced oil recovery, pharmaceutical, and detergent industry. In this study, rhamnolipids extracted from P. aeruginosa P6 were characterized to determine their potential fields of application. Thin-layer chromatographic analysis of the produced rhamnolipids indicated the production of two homologues: mono- and di-rhamnolipids, whose structures were verified by 1H and 13C nuclear magnetic resonance spectroscopy. Additionally, high performance liquid chromatography-mass spectrometry identified seven different rhamnolipid congeners, of which a significantly high proportion was di-rhamnolipids reaching 80.16%. Rha-Rha-C10-C10 was confirmed as the principal compound of the rhamnolipid mixture (24.30%). The rhamnolipids were capable of lowering surface tension of water to 36 mN/m at a critical micelle concentration of 0.2 g/L, and exhibited a great emulsifying activity (E24 = 63%). In addition, they showed excellent stability at pH ranges 4-8, NaCl concentrations up to 9% (w/v) and temperatures ranging from 20 to 100 °C and even after autoclaving. These results suggest that rhamnolipids, produced by P. aeruginosa P6 using the cheap substrate glycerol, are propitious for biotechnology use in extreme and complex environments, like oil reservoirs and hydrocarbon contaminated soil. Moreover, P. aeruginosa P6 may be considered, in its wild type form, as a promising industrial producer of di-RLs, which have superior characteristics for potential applications and offer outstanding commercial benefits.

Biosurfactants as a Novel Additive in Pharmaceutical Formulations: Current Trends and Future Implications

BACKGROUND

Surfactants are an important category of additives that are used widely in most of the formulations as solubilizers, stabilizers, and emulsifiers. Current drug delivery systems comprise of numerous synthetic surfactants (such as Cremophor EL, polysorbate 80, Transcutol-P), which are associated with several side effects though used in many formulations. Therefore, to attenuate the problems associated with conventional surfactants, a new generation of surface-active agents is obtained from the metabolites of fungi, yeast, and bacteria, which are termed as biosurfactants.

OBJECTIVES

In this article, we critically analyze the different types of biosurfactants, their origin along with their chemical and physical properties, advantages, drawbacks, regulatory status, and detailed pharmaceutical applications.

METHODS

243 papers were reviewed and included in this review.

RESULTS

Briefly, Biosurfactants are classified as glycolipids, rhamnolipids, sophorolipids, trehalolipids, surfactin, lipopeptides & lipoproteins, lichenysin, fatty acids, phospholipids, and polymeric biosurfactants. These are amphiphilic biomolecules with lipophilic and hydrophilic ends and are used as drug delivery vehicles (foaming, solubilizer, detergent, and emulsifier) in the pharmaceutical industry. Despite additives, they have some biological activity as well (anti-cancer, anti-viral, anti-microbial, P-gp inhibition, etc.). These biomolecules possess better safety profiles and are biocompatible, biodegradable, and specific at different temperatures.

CONCLUSION

Biosurfactants exhibit good biomedicine and additive properties that can be used in developing novel drug delivery systems. However, more research should be driven due to the lack of comprehensive toxicity testing and high production cost which limits their use.

Recent progress and trends in the analysis and identification of rhamnolipids

Rhamnolipids have extensive potential applications and are the most promising biosurfactants for commercialization. The efficient and accurate identification and analysis of these are important to their production, application and commercialization. Accordingly, significant efforts have been made to identify and analyse rhamnolipids during screening of producing strains, fermentation and application processes. Cationic cetyltrimethylammonium bromide-methylene blue (CTAB-MB) test combines a series of indirect assays to efficiently assist in the primary screening of rhamnolipids-producing strains, while the secretion of rhamnolipids by these strains can be identified through TLC, FTIR, NMR, electrospray ionization mass spectrometry (ESI-MS) and HPLC-MS analysis. Rhamnolipids can be quantified by colorimetric methods requiring the use of concentrated acid, and this approach has the advantages of reliability, simplicity, low-cost and excellent reproducibility with very low technological requirements. HPLC-MS can also be employed as required as a more accurate quantification method. In addition, HPLC-ELSD has been established as the internationally acceptable measure of rhamnolipids for commercial purposes. The preparation of well-accepted rhamnolipids standards and modifications of analysis operations are essential to further enhance the accuracy and improve the simplicity of rhamnolipid analysis.Key points• Current status of R&D works on determination of rhamnolipids is listed• Advantages and disadvantages of various types analysis are summarized• Limitations of current rhamnolipid quantification are discussed Graphical abstract.

Surface sensing triggers a broad-spectrum antimicrobial response in Pseudomonas aeruginosa

Interspecies bacterial competition may occur via cell‐associated or secreted determinants and is key to successful niche colonization. We previously evolved Pseudomonas aeruginosa in the presence of Staphylococcus aureus and identified mutations in the Wsp surface‐sensing signalling system. Surprisingly, a ΔwspF mutant, characterized by increased c‐di‐GMP levels and biofilm formation capacity, showed potent killing activity towards S. aureus in its culture supernatant. Here, we used an unbiased metabolomic analysis of culture supernatants to identify rhamnolipids, alkyl quinoline N‐oxides and two siderophores as members of four chemical clusters, which were more abundant in the ΔwspF mutant supernatants. Killing activities were quorum‐sensing controlled but independent of c‐di‐GMP levels. Based on the metabolomic analysis, we formulated a synthetic cocktail of four compounds, showing broad‐spectrum anti‐bacterial killing, including both Gram‐positive and Gram‐negative bacteria. The combination of quorum‐sensing‐controlled killing and Wsp‐system mediated biofilm formation endows P. aeruginosa with capacities essential for niche establishment and host colonization.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Glycyrrhetinic acid modified and pH-sensitive mixed micelles improve the anticancer effect of curcumin in hepatoma carcinoma cells

Curcumin (CUR), a natural polyphenolic compound existing in plants, exhibits anticancer potential in inhibiting the growth of various types of human cancer. However, the poor aqueous solubility and low bioavailability limit its clinical applications. pH-sensitive macromolecule F68-acetal-PCL (FAP) and active targeting macromolecule F68-glycyrrhetinic acid (FGA) were designed to fabricate mixed micelles for efficient delivery of CUR. The thin film hydration method was used to prepare CUR loaded mixed (MIX/CUR) micelles. The drug loading rate (DL) of MIX/CUR micelles was 6.31 ± 0.92%, which remained stable for 15 days at 4 °C. The particle size and zeta potential of the MIX/CUR micelles were 91.06 ± 1.37 nm and -9.79 ± 0.47 mV, respectively. The MIX/CUR micelles exhibited pH sensitivity in a weak acid environment, and showed rapid particle size variation and drug release. In addition, in vitro tests demonstrated that MIX/CUR micelles induced higher cytotoxicity and apoptosis than free CUR, non-pH-sensitive F68-PCL (FBP)/CUR micelles and pH-sensitive FAP/CUR micelles in SMMC7721 and Hepa1-6 cells. Besides, mixed micelles were more effective than FBP and FAP micelles in a cell uptake experiment, which was medicated by a GA receptor. All in all, these results indicated that MIX/CUR micelles could be regarded as an ideal drug administration strategy against hepatoma carcinoma cells.

Effects of Burkholderia thailandensis rhamnolipids on the unicellular algae Dunaliella tertiolecta

The effects of rhamnolipids (RLs) produced and further purified from Burkholderia thailandensis, on the unicellular microalgae Dunaliella tertiolecta were investigated, in terms of RLs ability to affect algal growth, photosynthetic apparatus structure and energy flux, round and through photosystems II and I. Specifically, 24-48 h RLs-treated algae (RLs at concentrations ranged from 5 to 50 mg L^-1) showed significantly decreased levels of growth rate, while increased levels of Chl a and b were obtained only in 72-96 h RLs-treated algae. Similarly, although no changes were obtained in the Chl a/b ratio and almost all chlorophyll fluorescence parameters over time, yields of electron transport (ϕR₀, ϕE₀) and respective performance index (PI_total) were negatively affected at 72 and 96 h. Based on those findings, it seems that the inhibitory effect of RLs on the algae growth rate after 24 and 48 h and the gradual attenuation of the phenomenon (after 72 h of exposure), may indicate the initial response of the organism, as well as algae ability to overcome, since RLs showed no effects on algae photosynthetic ability. Those findings reveal for the first time that RLs from Burkholderia thailandensis are not harmful for Dunaliella tertiolecta. However, further studies with the use of more aquatic species could be essential for assessing the RLs-mediated effects on aquatic biota.

Exploring the Dual Interaction of Natural Rhamnolipids with Plant and Fungal Biomimetic Plasma Membranes through Biophysical Studies

Rhamnolipids (RLs) are potential biocontrol agents for crop culture protection. Their mode of action has been proposed as dual, combining plant protection activation and antifungal activities. The present work focuses on the interaction of natural RLs with plant and fungi membrane models at the molecular scale. Representative models were constructed and the interaction with RLs was studied by Fourier transform infrared (FTIR) and deuterium nuclear magnetic resonance (²H NMR) spectroscopic measurements. Molecular dynamic (MD) simulations were performed to investigate RL insertion in lipid bilayers. Our results showed that the RLs fit into the membrane models and were located near the lipid phosphate group of the phospholipid bilayers, nearby phospholipid glycerol backbones. The results obtained with plant plasma membrane models suggest that the insertion of RLs inside the lipid bilayer did not significantly affect lipid dynamics. Oppositely, a clear fluidity increase of fungi membrane models was observed. This effect was related to the presence and the specific structure of ergosterol. The nature of the phytosterols could also influence the RL effect on plant plasma membrane destabilization. Subtle changes in lipid dynamics could then be linked with plant defense induction and the more drastic effects associated with fungal membrane destabilization.

The Role of Biosurfactants in the Continued Drive for Environmental Sustainability

Biosurfactants are microbial products that have been increasingly researched due to their many identified advantages, such as low toxicity and high activity at extreme temperatures, but more importantly, they are biodegradable and compatible with the environment. Biosurfactants are versatile products with vast applications in the clean-up of environmental pollutants through biodegradation and bioremediation. They also have applications in the food, pharmaceutical, and other industries. These advantages and wide range of applications have led to the continued interest in biosurfactants. In particular, there is a growing discussion around environmental sustainability and the important role that biosurfactants will increasingly play in the near future, for example, via the use of renewable by-products as substrates, waste reduction, and potential reuse of the treated waste. This has resulted in increased attention on these microbial products in industry. Research highlighting the potential of biosurfactants in environmental sustainability is required to drive efforts to make biosurfactants more viable for commercial and large-scale applications; making them available, cheaper and economically sustainable. The present review discusses the unique relationship between biosurfactants and environmental sustainability, especially the role that biosurfactants play in the clean-up of environmental pollutants and, therefore, increasing environmental protection.

Saponins and microbial biosurfactants: Potential raw materials for the formulation of cosmetics

The cosmetic industry is currently one of the fasting growing sections of the economy in many countries. The recent tendency toward the use of cosmetics of a natural origin has driven the industry to seek alternatives to synthetic components in the formulation of products. Biosurfactants are natural compounds that have considerable potential for application in the formulation of safe, effective cosmetics as a replacement for commonly used chemical tensioactive agents. The present review provides essential information on the physicochemical and biological properties of saponins and microbial biosurfactants employed in cosmetic products, with a focus on the use of these natural compounds in shampoos, addressing the current state of research and patents involving biosurfactants for this purpose. The challenges and prospects of this cosmetic application are also discussed. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:1482-1493, 2018.

Multicomponent ionic liquid CMC prediction

We created a model to predict CMC of ILs based on 704 experimental values published in 43 publications since 2000. Our model was able to predict CMC of variety of ILs in binary or ternary system in a presence of salt or alcohol. The molecular volume of IL (V_m), solvent-accessible surface (Ŝ), solvation enthalpy (Δ_solvG^∞), concentration of salt (C_s) or alcohol (C_a) and their molecular volumes (V_ms and V_ma, respectively) were chosen as descriptors, and Kernel Support Vector Machine (KSVM) and Evolutionary Algorithm (EA) as regression methodologies to create the models. Data was split into training and validation set (80/20) and subjected to bootstrap aggregation. KSVM provided better fit with average R² of 0.843, and MSE of 0.608, whereas EA resulted in R² of 0.794 and MSE of 0.973. From the sensitivity analysis it was shown that V_m and Ŝ have the highest impact on ILs micellization in both binary and ternary systems, however surprisingly in the presence of alcohol the V_m becomes insignificant/irrelevant. Micelle stabilizing or destabilizing influence of the descriptors depends upon the additives. Previous attempts at modelling the CMC of ILs was generally limited to small number of ILs in simplified (binary) systems. We however showed successful prediction of the CMC over a range of different systems (binary and ternary).

Rhamnolipids and lactonic sophorolipids: natural antimicrobial surfactants for oral hygiene

AIMS

To assess the efficacy of rhamnolipid (mixture of monorhamnolipid and dirhamnolipid congeners), purified monorhamnolipid, dirhamnolipid and lactonic sophorolipid biosurfactants against pathogens important for oral hygiene.

METHODS AND RESULTS

Acquired and produced biosurfactants were fully characterized to allow the antimicrobial activity to be assigned to the biosurfactant congeners. Antimicrobial activity was assessed using the resazurin-aided microdilution method. Mixed rhamnolipid JBR425 (MR) and lactonic sophorolipids (LSLs) demonstrated the lowest minimum inhibitory concentration (MIC) which ranged between 100 and 400 μg ml^-1 against Streptococcus mutans, Streptococcus oralis, Actinomyces naeslundii, Neisseria mucosa and Streptococcus sanguinis. Combining these biosurfactants with standard antimicrobial agents namely chlorhexidine, sodium lauryl sulphate, tetracycline HCl and ciprofloxacin showed a dramatic drop in the MIC values. In addition, in vitro studies demonstrated the biosurfactants' ability to prevent and disrupt oral pathogens biofilms. The increased permeability of microorganisms treated with biosurfactant, as shown using bisbenzimide dye, in part explains the inhibition effect.

CONCLUSION

The results demonstrate that rhamnolipids and LSLs have the ability to inhibit oral pathogens both in planktonic and oral biofilm states.

SIGNIFICANCE AND IMPACT OF THE STUDY

The findings indicate the potential value of biosurfactants for both oral hygiene and the pharmaceutical industries since there is a serious need to reduce the reliance on synthetic antimicrobials and antibiotics.

Rhamnolipids as epithelial permeability enhancers for macromolecular therapeutics

The use of surfactants as drug permeability enhancers across epithelial barriers remains a challenge. Although many studies have been performed in this field using synthetic surfactants, the possibility of employing surfactants produced by bacteria (the so called biosurfactants") has not been completely explored. Among them, one of the most well characterized class of biosurfactants are rhamnolipids. The aim of the study was to investigate the effect of rhamnolipids on the epithelial permeability of fluorescein isothiocyanate-labelled dextrans 4kDa and 10kDa (named FD4 and FD10, respectively) as model for macromolecular drugs, across Caco-2 and Calu-3monolayers. These cell lines were selected as an in vitro model for the oral and respiratory administration of drugs. Before performing permeability studies, rhamnolipids mixture was analysed in terms of chemical composition and quantification through mass analysis and HPLC. Cytotoxicity and transepithelial electrical resistance (TEER) studies were also conducted using Caco-2 and Calu-3 cell lines. A dose-dependent effect of rhamnolipids on TEER and FD4 or FD10 permeability across both cell lines was observed at relatively safe concentrations. Overall, results suggest the possibility of using rhamnolipids as absorption enhancers for macromolecular drugs through a reversible tight junction opening (paracellular route), despite more investigations are required to confirm their mechanism of action in term of permeability.