Rapid microwave-assisted growth of silver nanoparticles on 3D graphene networks for supercapacitor application

Fabrication of Silver Nanoparticle Loaded into Nanocellulose Derived from Hemp and Poly(vinyl alcohol)-Based Composite as an Electrode for Electrochemical Sensors for Lactate Determination

Nanocellulose derived from hemp (HNC) with the addition of silver nanoparticles (AgNPs) is utilized for improving the electrochemical sensing performances for lactate detection. Initially, HNC is chemically extracted and purified by using alkali treatment and acid hydrolysis. Then, AgNPs are nucleated in situ by the self-reduction process prior to forming a composite with poly(vinyl alcohol) (PVA). This nanocomposite significantly improves the electrochemical properties of the electrode, including electrochemical conductivity and electrocatalysis. The morphologies and chemical alterations of the HNC/AgNPs-PVA nanocomposite are investigated by field emission scanning electron microscopy. It demonstrates a three-dimensional network with random orientation of the nanocellulose fiber. The AgNPs are well-dispersed in the nanocomposite. Moreover, the nanocomposite provides high thermal stability up to 450 °C. Then, it is remarkably noted that 10 wt % HNC/AgNPs-PVA modified on the electrode provides the highest current responses, with a standard redox couple [(Fe(CN)6]3-/4-]. For lactate detection, this modified screen-printed graphene electrode with nonimmobilized lactate oxidase exhibits an increase in the current signal with the increment of lactate concentration and offered a linear range of 0-25 mM, covering a cutoff value (12.5 mM) for muscle fatigue indication. Eventually, this sensor is successfully applied for lactate detection with high potential for a wearable lactate sensor.

Synthesis of silver nanoparticles using bio valorization coffee waste extract: photocatalytic flow-rate performance, antibacterial activity, and electrochemical investigation

It is well known that biogenic synthesis, as compared to other processes, has proven to be highly effective in the fabrication of silver nanoparticles (AgNPs). Thus, our current study focused on synthesizing AgNPs using coffee waste extract (CWE). CWE contains many compounds identified by HPLC, which reduce, cap, and stabilize AgNPs in its solution. The as-synthesized AgNPs were produced with a monodispersed small size around 20 nm and exhibited in-plane dipole plasmon resonances of hexagonal nanoplates. AgNPs were characterized by both physical and spectroscopic methods, which confirmed their nanoscale dimensions with a hexagonal shape. The as-prepared AgNPs (12 mg) enabled the photodegradation of phenol compounds (20 mL) with a removal efficiency of ~ 94.6% in a short time in the presence of citric acid. Additionally, the second promising application of AgNPs was the tendency to remove the hazard 2,4 dinitroaniline (2,4 DNA) with a percent more than 97% while using only 7 mg of AgNPs. Moreover, the green synthesized AgNPs are superior in inhibiting bacterial growth and killing most infected microbes such as B. subtilis, P. aeruginosa, S. aureus, and E. coli. The electrochemical characteristics of the AgNPs were evaluated using a three-electrode system. The calculated specific capacitance was 280 F g-1 at 0.56 A g-1. Furthermore, after 1000 cycles at 2.2 A g-1, the AgNPs electrode demonstrates an excellent cycling stability behavior with 94.8% capacitance retention. Based on the previous promising results, it can be concluded that CWE is an environmentally benign extract to prepare AgNPs with low cost, saving and easily used for many great domains in photocatalytic, phenol compound removals, and production of functional nanodevices.

Improvement of nickel-cobalt-based supercapacitors energy storage performance by modification of elements

Hybrid supercapacitors have the advantages of fast charging and discharging and long service life, which are an efficient and practical energy storage device. Therefore, the design of hybrid supercapacitors is the focus of current research. In this paper, the silver modified spinel NiCo₂S₄ nanorods (Ag₂S-NiCo₂S₄/CF) are synthesized by an efficient and economical method, which has excellent electrochemical performance. The Ag₂S-NiCo₂S₄/CF shows a high specific capacity of 179.7 mAh g^-1 at current density of 1 A g^-1, and excellent rate capability (capacitance retention of ~87% at 20 A g^-1). The corresponding Ag₂S-NiCo₂S₄/CF//AC/CF hybrid supercapacitor is assembled by Ag₂S-NiCo₂S₄/CF as the positive electrode, which can provide an energy density of 35.978 Wh kg^-1 at a high-power density of 800 W kg^-1 and has significant cyclic stability (~80% of the initial capacitor after ~9600 cycles). Therefore, Ag₂S-NiCo₂S₄/CF material is a promising electrode material that can be applied to hybrid supercapacitors.

Hybridized Graphene for Supercapacitors: Beyond the Limitation of Pure Graphene

Graphene-based supercapacitors have been attracting growing attention due to the predicted intrinsic high surface area, high electron mobility, and many other excellent properties of pristine graphene. However, experimentally, the state-of-the-art graphene electrodes face limitations such as low surface area, low electrical conductivity, and low capacitance, which greatly limit their electrochemical performances for supercapacitor applications. To tackle these issues, hybridizing graphene with other species (e.g., atom, cluster, nanostructure, etc.) to enlarge the surface area, enhance the electrical conductivity, and improve capacitance behaviors are strongly desired. In this review, different hybridization principles (spacers hybridization, conductors hybridization, heteroatoms doping, and pseudocapacitance hybridization) are discussed to provide fundamental guidance for hybridization approaches to solve these challenges. Recent progress in hybridized graphene for supercapacitors guided by the above principles are thereafter summarized, pushing the performance of hybridized graphene electrodes beyond the limitation of pure graphene materials. In addition, the current challenges of energy storage using hybridized graphene and their future directions are discussed.

One-step fabrication of recycled Ag nanoparticles/graphene aerogel with high mechanical property for disinfection and catalytic reduction of 4-nitrophonel

Fabrication of smart composites with expected removal property and excellent recycle performance for micro-pollutants including microbes and organic contaminants without formation of second-pollutants is highly desired. In this work, Ag nanoparticles (Ag NPs) homogenously loaded on graphene aerogel (GA) as Ag NPs/GA was facilely fabricated by a one-step process and the composite was characterized in detail. The bactericidal performance of the composite towards escherichia coli (E. coli) was evaluated and the catalytic activity was probed for the reduction of 4-nitrophenol (4-NP). Results showed that the composite contains about 44.4 wt% of well-dispersed Ag NPs with diameters ranging from 10 to 100 nm. Compared with the bare Ag particles or GA, Ag NPs/GA exhibited an enhanced bactericidal performance for 8-lg of E. coli cells with 100% inactivation rate and catalytic activity for 4-NP with 96.6% degradation rate, respectively. Impressively, the 100% inactivation rates for 8-lg of E. coli remained after 7 recycles and the releasing silver was negligible compared with the loaded Ag NPs. Moreover, the used Ag NPs/GA for the catalytic reduction of 4-NP can be regenerated easily by calcination in inert atmosphere. Hence, Ag NPs/GA can be regarded as a promising and cost-efficient composite for environmental remediation.

Sonochemically recovered silver oxide nanoparticles from the wastewater of photo film processing units as an electrode material for supercapacitor and sensing of 2, 4, 6-trichlorophenol in agricultural soil samples

The present work describes the sensing application and supercapacitive behavior of silver oxide nanoparticles recovered from wastewater of photo film processing units via one-pot green sonochemical recovery process. The recovered silver oxide nanoparticles (Ag₂O NPs) were characterized by spectral techniques such as FT-IR, Raman, UV-Vis and analytical tools such as XRD, FE-SEM, TEM, EDX, XPS and BET. In view of Ag₂O NPs as electrode material with wide technological applications, the recovered Ag₂O NPs were examined for their sensing and supercapacitive behavior. The developed sensor was explored to detect 2, 4, 6-trichlorophenol, and as expected it shows moral parameters which are required of an effective sensor. Therefore, it was exploited for the quantification of 2, 4, 6-trichlorophenol in soil samples from the agricultural area. Cyclic voltammetric (CV), Galvanostatic Charge-Discharge (GCD) and Electrochemical Impedance Spectroscopic (EIS) studies on the recovered Ag₂O NPs coated Ni foam electrode depicted the pronounced capacitive behavior. The GCD studies revealed an enhanced electrochemical performance, particularly with the large specific capacitance of 530 F/g at a current density of 1 A/g. The cyclic stability of the electrode material was identified with 88% retention in specific capacitance even after 5000 GCD cycles. These results strongly proved that the recovered Ag₂O NPs are potential candidates for sensing and supercapacitor applications.