Zwitterionic hydrogel for preserving stability and activity of oxidase enzyme for electrochemical biosensor

Enzymatic electrochemical biosensor is the most common analytical platform for medical diagnosis. To mimic the biological environment of the enzyme for maintaining the function of biosensor, zwitterionic hydrogels have been recognized as effective matrices for enzymatic immobilization. Herein, a zwitterionic hydrogel derived from a copolymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)-co-N-methacryloyloxyethyl tyrosine methylester (MAT)] (PMM) was firstly applied as versatile coating to preserve stability and activity of oxidase enzymes, glucose oxidase (GOx) and lactate oxidase (LOx) for enzymatic electrochemical sensor. A screen-printed carbon electrode (SPCE) was sequentially coated with nitrogen-doped graphene (NDG), oxidase enzyme, and PMM mixed with Ru(II)bpy32+ and (NH4)2S2O8 followed by visible light irradiation for 3 min to induce PMM gelation. Electrochemical detection of glucose and lactate using the modified SPCE was performed via amperometry in the presence of hydrogen peroxide. The activity of both GOx and LOx immobilized on the modified SPCE was well maintained for 49 days at 87 and 80 %, respectively. Additionally, two different electrodes, a screen-printed graphene electrode (SPGE), and a screen-printed silver electrode (SPAgE), similarly modified gave the same satisfactory detection of spiked glucose and lactate in human plasma and sweat with 93-118 % recovery. This indicates the potential of the PMM hydrogel as a universal platform for preservation of enzymes which can be easily fabricated without the need for specific chemical modification of the electrode.

Fabrication of Silver Nanoparticle Loaded into Nanocellulose Derived from Hemp and Poly(vinyl alcohol)-Based Composite as an Electrode for Electrochemical Sensors for Lactate Determination

Nanocellulose derived from hemp (HNC) with the addition of silver nanoparticles (AgNPs) is utilized for improving the electrochemical sensing performances for lactate detection. Initially, HNC is chemically extracted and purified by using alkali treatment and acid hydrolysis. Then, AgNPs are nucleated in situ by the self-reduction process prior to forming a composite with poly(vinyl alcohol) (PVA). This nanocomposite significantly improves the electrochemical properties of the electrode, including electrochemical conductivity and electrocatalysis. The morphologies and chemical alterations of the HNC/AgNPs-PVA nanocomposite are investigated by field emission scanning electron microscopy. It demonstrates a three-dimensional network with random orientation of the nanocellulose fiber. The AgNPs are well-dispersed in the nanocomposite. Moreover, the nanocomposite provides high thermal stability up to 450 °C. Then, it is remarkably noted that 10 wt % HNC/AgNPs-PVA modified on the electrode provides the highest current responses, with a standard redox couple [(Fe(CN)6]3-/4-]. For lactate detection, this modified screen-printed graphene electrode with nonimmobilized lactate oxidase exhibits an increase in the current signal with the increment of lactate concentration and offered a linear range of 0-25 mM, covering a cutoff value (12.5 mM) for muscle fatigue indication. Eventually, this sensor is successfully applied for lactate detection with high potential for a wearable lactate sensor.

Graphene oxide-alginate hydrogel-based indicator displacement assay integrated with diaper for non-invasive Alzheimer's disease screening

Pyrocatechol violet/copper ion-graphene oxide/alginate (PV/Cu2+-GO/Alg) hydrogel was fabricated and applied as a colorimetric sensor for monitoring urinary cysteine via an indicator-displacement assay (IDA) and Cu2+-cysteine affinity pair. The hydrogel-based sensor was formed by Ca2+ cations cross-linked PV/Cu2+-GO/Alg. The morphologies of hydrogel were characterized by field-emission scanning electron microscopy with energy-dispersive X-ray spectroscopy and Fourier-transform Raman spectroscopy. Incorporating GO into the hydrogel improved its uniformity of porosity, large surface area, and compressive strength, leading to amplified colorimetric signals of the hydrogel sensor. Under optimal conditions, this sensor offered a linear range of 0.0-0.5 g/L with a detection limit of 0.05 g/L for cysteine without interfering effects in urine. Furthermore, this hydrogel-based sensor was applied for urinary cysteine detection and validated with laser desorption ionization mass spectrometry. This platform could be used to determine cysteine at its cutoff (0.25 g/L) in human urine, which was distinguishable between normal and abnormal individuals, to evaluate an early stage of Alzheimer's disease. Eventually, this system was integrated with diapers for a wearable cysteine sensor.

Bacterial cellulose composite hydrogel for pre-concentration and mass spectrometric detection of thiol-containing biomarker

Simple soaking of bacterial cellulose (BC) membrane in carboxymethyl cellulose (CMC) solution yielded BC/CMC hydrogel having re-swellable property. Then, gold nanoparticles (AuNPs) were embedded in the BC/CMC hydrogel via in situ chemical reduction to form BC/CMC/AuNPs composite hydrogel. It was found that the composite hydrogel exhibited physical/chemical characteristics similar to those of BC. The AuNPs with an average diameter of 13 nm distributed uniformly within the BC/CMC matrix as verified by transmission electron microscopy. The novelty of this work is the application of the BC/CMC/AuNPs composite hydrogel for selective adsorption of an important thiol-containing biomarker of Alzheimer's disease, glutathione (GSH), prior to direct laser desorption/ionization mass spectrometric (LDI-MS) detection. GSH adsorbed in the BC/CMC/AuNPs composite hydrogel showed the high ionization signal in LDI-MS providing a linear range of 50-10,000 nM with a limit of detection as low as 54.1 nM, which is a cut-off level for distinguishing between normal individuals and Alzheimer's patients. It should be emphasized that an additional matrix was not necessary as AuNPs can act as self-matrix for LDI-MS analysis. Furthermore, the BC/CMC/AuNPs composite hydrogel can effectively preconcentrate GSH approximately 10 times upon adsorption allowing for ultrasensitive detection of GSH required for disease diagnosis.

Alternative platform for COVID-19 diagnosis based on AuNP-modified lab-on-paper

COVID-19 has caused global health problems, and so rapid diagnosis is crucial to slow spread of the disease. Herein, a novel lab-on-paper screening method for SARS-CoV-2 Omicron BA.2 variant was developed using a gold nanoparticle-based colorimetric biosensor along with sensitive detection of SARS-CoV-2 antigen using laser desorption ionization-mass spectrometry (LDI-MS). As a result of antigen-antibody interaction, in the presence of SARS-CoV-2 antigen the gold nanoparticles undergo aggregation and change color from red to light purple, allowing for rapid determination of SARS-CoV-2 antigen with the naked eye. Furthermore, the lab-on-paper method can be directly applied as a substrate for sensitive quantitation of SARS-CoV-2 antigen in saliva using LDI-MS without the use of a conventional organic matrix and sample preparation. LDI-MS offers early diagnosis with high sensitivity, rapidity without sample preparation and lower cost per test compared with reverse transcriptase-PCR, which is crucial for preventing mortality in patients with underlying conditions. This method showed linearity over 0.01-1 μg mL^-1 covering the cut-off value of 0.048 μg mL^-1 for COVID-19 detection in human saliva. Moreover, a colorimetric sensor for urea was also fabricated in-parallel, for prediction of COVID-19 severity in patients with chronic kidney disease. The color change upon increasing urea concentration directly reflected kidney damage, which is related to increasing risk of mortality among patients with COVID-19. Hence, this platform might be a potential device for non-invasive diagnosis of SARS-CoV-2 Omicron BA.2 variant, which is the variant of most concern because it is transmitted more rapidly than the original SARS-CoV-2 virus and the Delta variant.

Carbonization of self-reduced AuNPs on silk as wearable skin patches for non-invasive sweat urea detection

Flexible conductive skin patches were readily fabricated on silk fabric by in situ deposition of gold nanoparticles (AuNPs) followed by carbonization. The carbonized AuNPs-silk with high flexibility was characterized by field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and Fourier transform Raman spectroscopy (FT-Raman) to verify the well arrangement surface and desired chemical binding. The conductivity of silk skin patch, measured by a four-point probe, was found to be 109.24 ± 13 S cm^-1 × 10^-3, verifying the potential application as a working electrode in electrochemical sensor and a sweat collection patch for direct detection by laser desorption/ionization mass spectrometry (LDI-MS). This silk skin patch offered a linear range of 0-100 mM with a detection limit (LOD) of 20 mM for electrochemical sensor and 8 mM for LDI-MS, respectively. Ultimately, this skin patch is successfully applied for the detection of sweat urea at its cut-off value (60 mM) for indicating chronic kidney disease (CKD) in artificial sweat with satisfactory results. By using dual-detection technique on single silk substrate, this platform might be an alternative approach for a non-invasive sweat urea detection with high precision.

Paper-Based Screen-Printed Ionic-Liquid/Graphene Electrode Integrated with Prussian Blue/MXene Nanocomposites Enabled Electrochemical Detection for Glucose Sensing

As glucose biosensors play an important role in glycemic control, which can prevent the diabetic complications, the development of a glucose sensing platform is still in needed. Herein, the first proposal on the in-house fabricated paper-based screen-printed ionic liquid/graphene electrode (SPIL-GE) modified with MXene (Ti₃C₂T_x), prussian blue (PB), glucose oxidase (GOx), and Nafion is reported. The concentration of PB/Ti₃C₂T_x was optimized and the optimal detection potential of PB/Ti₃C₂T_x/GOx/Nafion/SPIL-GE is -0.05 V. The performance of PB/Ti₃C₂T_x/GOx/Nafion modified SPIL-GE was characterized by cyclic voltammetry and chronoamperometry technique. This paper-based platform integrated with nanomaterial composites were realized for glucose in the range of 0.0-15.0 mM with the correlation coefficient R² = 0.9937. The limit of detection method and limit of quantification were 24.5 μM and 81.7 μM, respectively. In the method comparison, this PB/Ti₃C₂T_x/GOx/Nafion/SPIL-GE exhibits a good correlation with the reference hexokinase method. This novel glucose sensing platform can potentially be used for the good practice to enhance the sensitivity and open the opportunity to develop paper-based electroanalytical devices.

Room Temperature Nanographene Production via CO2 Electrochemical Reduction on the Electrodeposited Bi on Sn Substrate

Electrochemical reduction of carbon dioxide (CO₂RR) to crystalline solid carbon at room temperature is challenging, but it is a providential CO₂ utilization route due to its indefinite storage and potential applications of its products in many advanced technologies. Here, room-temperature synthesis of polycrystalline nanographene was achieved by CO₂RR over the electrodeposited Bi on Sn substrate prepared with various bismuth concentrations (0.01 M, 0.05 M, and 0.1 M). The solid carbon products were solely produced on all the prepared electrodes at the applied potential -1.1 V vs. Ag/AgCl and were characterized as polycrystalline nanographene with an average domain size of ca. 3-4 nm. The morphology of the electrodeposited Bi/Sn electrocatalysts did not have much effect on the final structure of the solid carbon products formed but rather affected the CO₂ electroreduction activity. The optimized negative potential for the formation of nanographene products on the 0.05Bi/Sn was ca. -1.5 V vs. Ag/AgCl. Increasing the negative value of the applied potential accelerated the agglomeration of the highly reactive nascent Bi clusters in situ formed under the reaction conditions, which, as a consequence, resulted in a slight deviation of the product selectivity toward gaseous CO and H₂ evolution reaction. The Bi-graphene composites produced by this method show high potential as an additive for working electrode modification in electrochemical sensor-related applications.

Conductive electrospun composite fibers based on solid-state polymerized Poly(3,4-ethylenedioxythiophene) for simultaneous electrochemical detection of metal ions

Conductive composite fibers containing poly (3,4-ethylenedioxythiophene) (PEDOT) and silver nanoparticles (AgNPs) were fabricated by emulsion electrospinning of 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) in toluene together with aqueous solution of poly (vinyl alcohol) (PVA) and silver nanoparticles (AgNPs) in the presence of sodium dodecylsulfate followed by heat treatment at 70 °C to convert DBEDOT to conductive PEDOT via solid state polymerization (SSP). The composite fibers were characterized by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy and thermogravimetric analysis. The PEDOT/PVA/AgNPs composite fibers deposited on a screen-printed carbon electrode (SPCE) surface exhibited good electrochemical response and was applied for simultaneous detection of heavy metal ions in a mixture, namely Zn(II), Cd(II), and Pb(II) via square wave anodic stripping voltammetry (SWASV). With added Bi⁺³ into the detection system, the bismuth film formed on the electrode allows effective alloy formation with the deposited heavy metals obtained upon reduction of the heavy metal ions, the detection of heavy metal ions after stripping was successfully accomplished with a linear range of 10-80 ppb and limits of detections (LOD) of 6, 3 and 8 ppb for Zn(II), Cd(II), and Pb(II), respectively.

A portable blood lactate sensor with a non-immobilized enzyme for early sepsis diagnosis

Early determination of blood lactate levels may accelerate the detection of sepsis, one of the most time-sensitive illnesses.

TiO2/MXene-PVA/GO hydrogel-based electrochemical sensor for neurological disorder screening via urinary norepinephrine detection

A hydrogel based on titanium dioxide/MXene with polyvinyl alcohol/graphene oxide (TiO₂/MXene-PVA/GO) composite was successfully formulated and applied to modify a screen-printed carbon electrode (SPCE) for urinary norepinephrine (NE) detection. The characterization confirmed that a nanocomposite hydrogel structure of TiO₂/MXene-PVA/GO was formed. The as-prepared hydrogel substantially enhanced the sensor performances due to electrocatalytic activity of TiO₂, high conductivity of MXene, and auto-sample preconcentration via PVA/GO hydrogel. The electrochemical behavior of NE was investigated by cyclic voltammetry and amperometry. Under optimized conditions, the TiO₂/MXene-PVA/GO hydrogel/SPCE response due to the oxidation of NE at +0.4 V (vs. Ag|AgCl) is proportional to the concentration of NE over 0.01 to 1.00 μM (R² = 0.9968) and 1.00 to 60.0 μM (R² = 0.9936) ranges with a detection limit (3σ) of 6 nM without interferent effect from common interferences in urine. Furthermore, this sensor was employed for urinary NE determination and validated by high performance liquid chromatography (HPLC) with a UV detector at 280 nm; the average recovery was found to be 97.6 to 102%, with a relative standard deviation (RSD) less than 4.9%. This device was sensitive enough to evaluate an early stage of neurological disorder via detecting clinically relevant NE level. Eventually, it was integrated with pantyliners which could be a potential wearable sensor in the near future.

Enhanced and Selective MALDI-MS Detection of Peptides via the Nanomaterial-Dependent Coffee Ring Effect

Nanomaterials have been explored as alternative matrices in MALDI-MS to overcome some of the limitations of conventional matrices. Recently, we demonstrated a new means by which nanomaterials can improve peptide ionization and detection in MALDI-MS analyses by exploiting the tendency of nanomaterials to form "coffee rings" upon drying from liquids. In the current work, we investigate how nanomaterial size and composition affect the signal enhancement of peptides through the coffee-ring effect. From studies of eight different types of nanomaterials ranging in size and composition, we find that most nanomaterials can provide signal enhancement ranging from 2- to 10-fold for individual peptides, as long as a coffee ring is formed. However, when a mixture of peptides is present in a sample, the signal enhancement is the greatest for peptides whose net charge is complementary to the nanomaterial's surface charge. These results suggest that careful design of NM surface properties could allow for selective, enhanced MALDI-MS detection of specific peptides in complex mixtures.

A non-enzymatic disposable electrochemical sensor based on surface-modified screen-printed electrode CuO-IL/rGO nanocomposite for a single-step determination of glucose in human urine and electrolyte drinks

A non-enzymatic disposable electrochemical sensor coupled with an automated sample pretreatment paper-based device was developed to avoid an additional sample preparation step for glucose determination in human urine and electrolyte drinks. The automated sample pretreatment paper-based device was successfully fabricated by the simple coating of a strong alkaline solution on a patterned wax paper, and then attached on an electrochemical sensor. The nanocomposite of copper oxide nanoparticles, ionic liquid and reduced graphene oxide (CuO-IL/rGO) modified on the screen-printed carbon electrode (SPCE) was created and used as a non-enzymatic electrochemical glucose sensor. The presence of the CuO-IL/rGO nanocomposite on the screen-printed electrode surface was confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction spectroscopy (XRD). Under optimal conditions, glucose was measured by dropping 100 μL sample solution on the device and detected via chronoamperometry (CA) using a smartphone potentiostat controlled by Android app., providing a rapid current response within 20 s and linearity in a range of 0.03-7.0 mM with a limit of detection (LOD) of 0.14 μM. Furthermore, this developed device was successfully applied for determining glucose levels in human urine and electrolyte drinks, exporting satisfying results correlated with a commercial enzymatic glucose biosensor and labeled values of the commercial products. Therefore, this device could be an alternative device for a non-enzymatic glucose sensor with single-step sample loading, allowing for real-time analysis, low cost, portability, disposability, and on-field measurement.

Label-free anti-Müllerian hormone sensor based on polyaniline micellar modified electrode

A label-free electrochemical immunosensor based on polyaniline (PANI) micellar electrode was firstly fabricated for direct AMH detection. To control the size regularity of PANI, a micelle-based method using ammonium peroxydisulfate (APS) as a reducing agent was employed in the polymerization process. The Anti-AMH antibodies were readily immobilized onto PANI via peptide bond to enhance the sensor specificity and sensitivity. This sensor was applied for the detection of AMH, an ovarian response indicator in female related to residual eggs during a woman's monthly cycle. The sensor performances were systematically investigated by differential pulse voltammetry. The anodic peak current decreases with the increase of AMH concentration owing to blocking of electron transfer by AMH. Under the optimal conditions, this sensor offers high sensitivity with a low detection limit of 0.1 ng mL^-1 and a wide linear range of 0.1-4 ng mL^-1, which is sensitive enough to indicate the ability to produce eggs during a woman's monthly cycle. Furthermore, this system requires lower sample volume (5 μL), while offers the simple fabrication with low cost and no synthetic challenge and faster analysis compared with a standard ELISA. Ultimately, this sensor was successfully applied for the detection of AMH in human serum with satisfactory results. Thus, it might be an alternative tool for AMH screening in clinical setting.

Bacterial cellulose-based re-swellable hydrogel: Facile preparation and its potential application as colorimetric sensor of sweat pH and glucose

Direct deposition of the negatively charged polyelectrolyte, carboxymethyl cellulose (CMC), into a bacterial cellulose (BC) matrix was used as a simple route to fabricate a re-swellable and biocompatible cellulose-based hydrogel. As a result of this non-destructive approach, the physical and mechanical property of the original BC were well-preserved within the resulting BC/CMC hydrogel. As a BC/CMC-based colorimetric pH sensor, it exhibited a rapid response with an easy color differentiation between each pH by the naked eye, and wide linear range of pH 4.0-9.0 with good linearity. For the detection of glucose in sweat, the BC/CMC-based colorimetric glucose sensor provided a low limit of detection (25 μM) with a wide linear detection range (0.0-0.5 mM) and high accuracy. These BC/CMC based sensors could potentially be applied as non-invasive semi-quantitative sensors for on-skin health monitoring.

Recent Advances in Microfluidic Paper-Based Analytical Devices toward High-Throughput Screening

Microfluidic paper-based analytical devices (µPADs) have become promising tools offering various analytical applications for chemical and biological assays at the point-of-care (POC). Compared to traditional microfluidic devices, µPADs offer notable advantages; they are cost-effective, easily fabricated, disposable, and portable. Because of our better understanding and advanced engineering of µPADs, multistep assays, high detection sensitivity, and rapid result readout have become possible, and recently developed µPADs have gained extensive interest in parallel analyses to detect biomarkers of interest. In this review, we focus on recent developments in order to achieve µPADs with high-throughput capability. We discuss existing fabrication techniques and designs, and we introduce and discuss current detection methods and their applications to multiplexed detection assays in relation to clinical diagnosis, drug analysis and screening, environmental monitoring, and food and beverage quality control. A summary with future perspectives for µPADs is also presented.

3D paper-based microfluidic device: a novel dual-detection platform of bisphenol A

A novel platform of 3D paper-based microfluidic device (μPADs) was fabricated by a digital plotter for high precision analysis of bisphenol A using electrochemistry along with LDI-MS detection.

Electrochemical immunosensor based on gold-labeled monoclonal anti-LipL32 for leptospirosis diagnosis

Leptospirosis is a critical human health problem in the tropical area, thus, a precise technique that can be used for point-of-care analysis is greatly required. This is the first report on electrochemical immunosensor based on gold-labeled monoclonal anti-LipL32 for rapid, simple and sensitive determination of LipL32. The sensor consisted of two LipL32-specific antibodies: an unlabeled capture primary antibody (Anti-1°Ab) and an electrochemically detectable gold-conjugated secondary antibody (Au-2°Ab). The Anti-1°Ab was immobilized onto the modified screen-printed graphene electrode (SPGE) to form the anti-LipL32 surface. The electrochemical signal response was determined by differential pulse voltammetry (DPV). In the presence of LipL32, the sensor displayed a significant increase in current response in a concentration-dependent manner, but no observable signal was detected in the absence of LipL32. The linearity between LipL32 concentration and the measured current was found in a range of 1-100 ng/mL, and the limit of detection (LOD) (3SD_blank/Slope) and limit of quantitation (LOQ) (10SD_blank/Slope) were found to be 0.28 and 0.93 ng/mL, respectively. This sensor was successfully applied to detect pathogenic Leptospira whole cell lysates samples with the satisfactory results. The promissing results suggested that this immunosensor might be an alternative tool for diagnosis of leptospirosis.

Reduced Graphene Oxide/Carboxymethyl Cellulose Nanocomposites: Novel Conductive Films

Herein, carboxymethyl cellulose nanocomposite films incorporated with graphene oxide and reduced graphene oxide were successfully prepared by a novel approach for the first time, and their alternative properties compared with the original carboxymethyl cellulose films were disclosed. For carboxymethyl cellulose/reduced graphene oxide film preparation, sodium borohydride was used as a chemical reducing agent. The carboxymethyl cellulose films were prepared by using a solvent casting method, followed by an acid treatment to decrease the water solubility (98%) while enhancing the tensile strength (15%) and elastic modulus (32%) of the original carboxymethyl cellulose films. Overall, the addition of 1.0 wt% graphene oxide and reduced graphene oxide to the treated films increased the water solubility, water absorption, tensile properties and electrical conductivity. Particularly, the electrical conductivity was predominantly enhanced 1.3×10⁵ times with graphene oxide and 2.2×10⁵ times with reduced graphene oxide compared to the treated carboxymethyl cellulose film. The electrical conductivity of the treated carboxymethyl cellulose film also increased with an increase in reduced graphene oxide. The effects of reduced graphene oxide on the water solubility, water absorption, tensile properties and electrical conductivity of the treated carboxymethyl cellulose film were more pronounced than those of graphene oxide, especially for the electrical conductivity. In conclusion, graphene oxide and reduced graphene oxide might be alternative nanofillers for improving the carboxymethyl cellulose film properties. For the future applications, carboxymethyl cellulose/reduced graphene oxide films prepared by using this approach might be employed as alternative materials in electronic packagings and electrochemical biosensors.

Non-invasive textile based colorimetric sensor for the simultaneous detection of sweat pH and lactate

A non-invasive textile-based colorimetric sensor for the simultaneous detection of sweat pH and lactate was created by depositing of three different layers onto a cotton fabric: 1.) chitosan, 2.) sodium carboxymethyl cellulose, and 3.) indicator dye or lactate assay. This sensor was characterized using field emission scanning electron microscopy and fourier transform infrared spectroscopy. Then, this sensor was used to measure pH and lactate concentration using the same sweat sample. The sensing element for sweat pH was composed of a mixture of methyl orange and bromocresol green while a lactate enzymatic assay was chosen for the lactate sensor. The pH indicator gradually shifted from red to blue as the pH increased, whereas the purple color intensity increased with the concentration of lactate in the sweat. By comparing these colors with a standard calibration, this platform can be used to estimate the sweat pH (1-14) and the lactate level (0-25 mM). Fading of the colors of this sensor was prevented by using cetyltrimethylammonium bromide (CTAB). The flexibility of this textile based sensor allows it to be incorporated into sport apparels and accessories hence potentially enabling real-time and continuous monitoring of sweat pH and lactate. This non-invasive sensing platform might open a new avenue for personal health monitoring and medical diagnosis as well as for determining of the physiological conditions of endurance athletes.

TiO2sol-embedded in electroless Ni–P coating: a novel approach for an ultra-sensitive sorbitol sensor

A Ni–P/Ni–P–TiO₂coating was readily prepared by direct incorporation of nano-TiO₂sol into a Ni–P solution for electroless deposition and applied as a novel electrode for sensitive sorbitol sensor.

Electrochemical detection of human papillomavirus DNA type 16 using a pyrrolidinyl peptide nucleic acid probe immobilized on screen-printed carbon electrodes

An electrochemical biosensor based on an immobilized anthraquinone-labeled pyrrolidinyl peptide nucleic acid (acpcPNA) probe was successfully developed for the selective detection of human papillomavirus (HPV) type 16 DNA. A 14-mer acpcPNA capture probe was designed to recognize a specific 14 nucleotide region of HPV type 16 L1 gene. The redox-active label anthraquinone (AQ) was covalently attached to the N-terminus of the acpcPNA probe through an amide bond. The probe was immobilized onto a chitosan-modified disposable screen-printed carbon electrode via a C-terminal lysine residue using glutaraldehyde as a cross-linking agent. Hybridization with the target DNA was studied by measuring the electrochemical signal response of the AQ label using square-wave voltammetric analysis. The calibration curve exhibited a linear range between 0.02 and 12.0 µM with a limit of detection and limit of quantitation of 4 and 14 nM, respectively. This DNA sensing platform was successfully applied to detect the HPV type 16 DNA from a PCR amplified (240 bp fragment of the L1 gene) sample derived from the HPV type 16 positive human cancer cell line (SiHa), and failed to detect the HPV-negative c33a cell line. The sensor probe exhibited very high selectivity for the complementary 14 base oligonucleotide over the non-complementary oligonucleotides with sequences derived from HPV types 18, 31 and 33. The proposed sensor provides an inexpensive tool for the early stage detection of HPV type 16, which is an important biomarker for cervical cancer.

Selective enrichment and sensitive detection of peptide and protein biomarkers in human serum using polymeric reverse micelles and MALDI-MS

Reverse-micelle forming amphiphilic homopolymers with carboxylic acid and quaternary amine substituents are used to selectively enrich biomarker peptides and protein fragments from human serum prior to matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) analysis. After depletion of human serum albumin (HSA) and immunoglobulin G (IgG), low abundance peptide biomarkers can be selectively enriched and detected by MALDI-MS at clinically relevant concentrations by using the appropriate homopolymer(s) and extraction pH value(s). Three breast cancer peptide biomarkers, bradykinin, C4a, and ITIH(4), were chosen to test this new approach, and detection limits of 0.5 ng mL(-1), 0.08 ng mL(-1), and 0.2 ng mL(-1), respectively, were obtained. In addition, the amphiphilic homopolymers were used to detect prostate specific antigen (PSA) at concentrations as low as 0.5 ng mL(-1) by targeting a surrogate peptide fragment of this protein biomarker. Selective enrichment and sensitive MS detection of low abundance peptide/protein biomarkers by these polymeric reverse micelles should be a sensitive and straightforward approach for biomarker screening in human serum.

Selective enrichment and analysis of acidic peptides and proteins using polymeric reverse micelles and MALDI-MS

The typical difficulties associated with the detection of acidic peptides (i.e., those with low isoelectric points (pI)) by matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) represent a challenge in some proteomic analyses. Here, reverse micelle-forming amphiphilic homopolymers with positively charged interiors are synthesized and used to selectively enrich low pI peptides from complex mixtures for MALDI-MS detection. When using these polymers, acidic proteolytic peptides that are undetectable during normal MALDI-MS analysis are selectively detected. We show that enrichment of these low pI peptides allows acidic proteins to be selectively targeted for detection in multiprotein digests. In addition, the presence of the positively charged polymers during MALDI-MS analyses enhances peptide ion signals by almost an order of magnitude, thereby achieving reproducible ion signals for acidic peptides at concentrations as low as 100 fM. Concurrent detection of acidic and basic peptides was also facilitated by utilizing a sequential extraction process involving reverse micelle forming polymers with positively and negatively charged interiors.

Generating peptide titration-type curves using polymeric reverse micelles as selective extraction agents along with matrix-assisted laser desorption ionization-mass spectrometry detection

Amphiphilic homopolymers that self-assemble into reverse micelles in nonpolar solvents have been used by us in the context of a two-phase liquid-liquid extraction protocol to selectively extract peptides from aqueous solution for MALDI-MS detection. In this manuscript, we investigate the scope of these materials in terms of its extraction capabilities, using compounds with varying isoelectric points (pI) and pK(a) values over a range of aqueous solution pHs. We find that the aqueous solution pH and analyte pK(a) values are the major factors controlling extraction selectivity. We also find that the experimental extraction efficiencies correspond very well with the fractional compositions of species calculated using analyte pK(a) values, indicating that these extraction materials can be used to simultaneously generate titration-type curves for each individual peptide in a mixture. We predict that such titration curves, along with accurate mass measurements, could represent a new way of improving protein identification procedures.