Efficient hydrogen production at a rationally designed MoSe2@Co3O4 p-n heterojunction

Cocreation of photogenerated electron and hole collectors on polymeric carbon nitride synergistically promotes carrier separation and reaction kinetics towards propelling photocatalytic hydrogen evolution

It is a challenging issue for the creation of photogenerated carrier collectors on the photocatalyst to drive charge separation and promote reaction kinetics in the photocatalytic reaction. Herein, based on one-step dual-modulation strategy, IrO2 nanodots are modified at the edge of polymeric carbon nitride (PCN) nanosheets and atomically dispersed Ir atoms are implanted in the skeleton of PCN to obtain a unique Ir-PCN/IrO2 photocatalyst. IrO2 nanodots and atomically dispersed Ir atoms act as hole and electron collectors to synergistically promote the carrier separation and reaction kinetics, respectively, thereby greatly improving the photocatalytic hydrogen evolution (PHE) performance. As a result, without adding additional cocatalyst, the PHE rate over the optimal Ir-PCN/IrO2-2% sample reaches up to 1564.4 μmol h-1 g-1 under the visible light irradiation, with achieving an apparent quantum yield (AQY) of 15.7% at 420 nm.

Heterojunction-Mediated Co-Adjustment of Band Structure and Valence State for Achieving Selective Regulation of Semiconductor Nanozymes

Improving reaction selectivity is the next target for nanozymes to mimic natural enzymes. Currently, the majority of strategies in this field are exclusively applicable to metal-organic-based or organic-based nanozymes, while limited in regulating metal oxide-based semiconductor nanozymes. Herein, taking semiconductor Co3O4 as an example, a heterojunction strategy to precisely regulate nanozyme selectivity by simultaneously regulating three vital factors including band structure, metal valence state, and oxygen vacancy content is proposed. After introducing MnO2 to form Z-scheme heterojunctions with Co3O4 nanoparticles, the catalase (CAT)-like and peroxidase (POD)-like activities of Co3O4 can be precisely regulated since the introduction of MnO2 affects the position of the conduction bands, preserves Co in a higher oxidation state (Co3+), and increases oxygen vacancy content, enabling Co3O4-MnO2 exhibit improved CAT-like activity and reduced POD-like activity. This study proposes a strategy for improving reaction selectivity of Co3O4, which contributes to the development of metal oxide-based semiconductor nanozymes.

Constructing Built-In Electric Field in NiCo2 O4 -CeO2 Heterostructures to Regulate Li2 O2 Formation Routes at High Current Densities

Developing catalysts with suitable adsorption energy for oxygen-containing intermediates and elucidating their internal structure-performance relationships are essential for the commercialization of Li-O2 batteries (LOBs), especially under high current densities. Herein, NiCo2 O4 -CeO2 heterostructure with a spontaneous built-in electric field (BIEF) is designed and utilized as a cathode catalyst for LOBs at high current density. The driving mechanism of electron pumping/accumulation at heterointerface is studied via experiments and density functional theory (DFT) calculations, elucidating the growth mechanism of discharge products. The results show that BIEF induced by work function difference optimizes the affinity for LiO2 and promotes the formation of nano-flocculent Li2 O2 , thus improving LOBs performance at high current density. Specifically, NiCo2 O4 -CeO2 cathode exhibits a large discharge capacity (9546 mAh g-1 at 4000 mA g-1 ) and high stability (>430 cycles at 4000 mA g-1 ), which are better than the majority of previously reported metal-based catalysts. This work provides a new method for tuning the nucleation and decomposition of Li2 O2 and inspires the design of ideal catalysts for LOBs to operate at high current density.

Accelerating Charge Separation and CO2 Photoreduction in Aqueous Phase under Visible Light with Ru Nanoparticles Loaded on Ga-Doped NiTiO3 in a Batch Photoreactor

Titanate perovskite (ATiO3) semiconductors show prospects of being active photocatalysts in the conversion of CO2 to chemical fuels such as methanol (CH3OH) in the aqueous phase. Some of the challenges in using ATiO3 are limited light-harvesting capability, rapid bulk charge recombination, and the low density of catalytic sites participating in CO2 reduction. To address these challenges, Ga-doped NiTiO3 (GNTO) photocatalysts in which Ga ions substitute for Ti ions in the crystal lattice to form electron trap states and oxygen vacancies have been synthesized in this work. The synthesized GNTO was then loaded with Ru nanoparticles to accelerate charge separation and enable excellent CO2 photoreduction activity under visible light. CO2 photoreduction was conducted in a batch photoreactor charged with a 0.1 M NaHCO3 aqueous solution at room temperature and a 3.5 bar pressure using a 1.0 wt % Ru-GNTO photocatalyst to yield methanol at a rate of 84.45 μmol g-1 h-1. A small amount of methane was produced as a side product at 21.35 μmol g-1 h-1, which is also a fuel molecule. We attribute this high catalytic activity toward CO2 photoreduction to a synergistic combination of our novel heterostructured 1.0 wt % Ru-GNTO photocatalyst and the implementation of a pressurized photoreactor. This work demonstrates an effective strategy for metal doping with active nanospecies functionality to improve the performance of ATiO3 photocatalysts in valorizing CO2 to solar fuels.

Defect and interface/surface engineering synergistically modulated electron transfer and nonlinear absorption properties in MoX2 (X = Se, S, Te)@ZnO heterojunction

Systematic interface and defect engineering strategies have been demonstrated to be an effective way to modulate the electron transfer and nonlinear absorption properties in semiconductor heterojunctions. However, the role played by defects and interfacial strain in electron transfer at the interface of the MoX2 (X = Se, S, Te)@ZnO heterojunction remains poorly understood. Herein, using the MoX2@ZnO heterojunction, we reveal that vacancies play a critical role in the interfacial electron transfer of heterojunctions. Specifically, we present the defect and interface engineering of the MoX2@ZnO heterojunction for controlled charge transfer and electron excitation-relaxation. The experimental characterization combined with first-principles calculations showed that the presence of defects promoted the transport of photogenerated carriers at the heterojunction interface, thereby inhibiting their rapid recombination. The DFT calculation confirmed that the electron band structure, density of states and charge density distribution in the system changed after the formation of Mo-O bonds. On the basis of defects and interfacial stress and the effective charge transfer, the MoX2@ZnO heterojunction exhibited excellent excitation and emission behaviors. The nonlinear optical regulation behavior of TMDs is expected to be realized with the help of the defects and interface/surface synergistically modulated effect of ZnO nanoparticles. The local strain generation on the MoX2@ZnO heterojunction boundary provides a new method for the design of new heterogeneous materials and will be of great significance to investigate the contact physical behavior and application of metals and two-dimensional (2D) semiconductors. This work provides some inspiration for the construction of heterojunctions with rich defects and surface/interface charge transfer channels to promote tunable electron transfer dynamics, thereby achieving a good nonlinear optical conversion efficiency and efficient charge separation in optoelectronic functional materials.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

Construction of Hollow Co3O4@ZnIn2S4 p-n Heterojunctions for Highly Efficient Photocatalytic Hydrogen Production

Photocatalysts derived from semiconductor heterojunctions for water splitting have bright prospects in solar energy conversion. Here, a Co₃O₄@ZIS p-n heterojunction was successfully created by developing two-dimensional ZnIn₂S₄ on ZIF-67-derived hollow Co₃O₄ nanocages, realizing efficient spatial separation of the electron-hole pair. Moreover, the black hollow structure of Co₃O₄ considerably increases the range of light absorption and the light utilization efficiency of the heterojunction avoids the agglomeration of ZnIn₂S₄ nanosheets and further improves the hydrogen generation rate of the material. The obtained Co₃O₄(20) @ZIS showed excellent photocatalytic H₂ activity of 5.38 mmol g^-1·h^-1 under simulated solar light, which was seven times more than that of pure ZnIn₂S₄. Therefore, these kinds of constructions of hollow p-n heterojunctions have a positive prospect in solar energy conversion fields.

1D CdS modified 3D zinc cobalt oxide heterojunctions boost solar-driven photocatalytic performance

In the process of photocatalysis, semiconductor materials generate photogenerated electrons and photogenerated holes when excited by sunlight, so as to participate in the process of photocatalytic decomposition of water to produce hydrogen.

Designing a Built-In Electric Field for Efficient Energy Electrocatalysis

To utilize intermittent renewable energy as well as achieve the goals of peak carbon dioxide emissions and carbon neutrality, various electrocatalytic devices have been developed. However, the electrocatalytic reactions, e.g., hydrogen evolution reaction/oxygen evolution reaction in overall water splitting, polysulfide conversion in lithium-sulfur batteries, formation/decomposition of lithium peroxide in lithium-oxygen batteries, and nitrate reduction reaction to degrade sewage, suffer from sluggish kinetics caused by multielectron transfer processes. Owing to the merits of accelerated charge transport, optimized adsorption/desorption of intermediates, raised conductivity, regulation of the reaction microenvironment, as well as ease to combine with geometric characteristics, the built-in electric field (BIEF) is expected to overcome the above problems. Here, we give a Review about the very recent progress of BIEF for efficient energy electrocatalysis. First, the construction strategies and the characterization methods (qualitative and quantitative analysis) of BIEF are summarized. Then, the up-to-date overviews of BIEF engineering in electrocatalysis, with attention on the electron structure optimization and reaction microenvironment modulation, are analyzed and discussed in detail. In the end, the challenges and perspectives of BIEF engineering are proposed. This Review gives a deep understanding on the design of electrocatalysts with BIEF for next-generation energy storage and electrocatalytic devices.

Co3O4-MoSe2@C nanocomposite as a multi-functional catalyst for electrochemical water splitting and lithium-oxygen battery

Co₃O₄-MoSe₂@C nanocomposite has been prepared by a convenient method via combining hydrothermally synthesized MoSe₂@C and Co₃O₄. When catalyzing the hydrogen evolution reaction and oxygen evolution reaction, the catalyst features low overpotentials of 144 mV and 360 mV (both at 10 mA cm^-2current density), respectively. It can also serve as the cathode in the lithium-oxygen battery and the device shows a low charging-discharging overpotential of 1.50 V with a stable performance of over 200 cycles at current density of 1000 mA g^-1, shedding light on the design and synthesis of novel multifunctional electrocatalysts for energy conversions.

Recent progress on transition metal diselenides from formation and modification to applications

The development of graphene promotes the research of similar two-dimensional (2D) materials, especially 2D transition metal dichalcogenides (TMDCs) with semiconductor properties. Monolayer or few-layer TMDCs have several advantages, such as direct band gap, weak interlayer van der Waals force, large interlayer spacing, and abundant marginal active sites, which make them widely used in catalysis, optoelectronics, as well as energy conversion and storage devices. In addition, transition metal diselenides (TMDSs) also possess many intriguing characteristics. For instance, transition metal diselenides (e.g., MoSe₂) have a more stable 1T phase, larger interlayer spacing, smaller band gap, and more obvious metallic property of Se than TMDCs (e.g., MoS₂). Thus, it has become one of the most attractive research topics branching out from TMDCs. Herein, this review unveils the structures, synthesis, properties, modifications, applications, and perspectives for TMDSs.

NiCo LDH in situ derived NiCoP 3D nanoflowers coupled with a Cu3P p-n heterojunction for efficient hydrogen evolution

With the extensive consumption of non-renewable energy sources, storing solar energy as chemical energy has aroused people's wide concern. In this study, we successfully developed a novel Cu₃P@NiCoP composite photocatalyst to produce hydrogen by splitting water under visible light irradiation. Both the building of a p-n heterojunction between Cu₃P and NiCoP and the three-dimensional nanoflower structure of NiCoP play a vital role in improving the performance of the catalyst. On the one hand, the coupling of Cu₃P and NiCoP built a p-n heterojunction at the photocatalyst interface, and the heterojunction could promote the separation efficiency of photogenerated carriers and prolong the life span of charges, therefore enhancing the photocatalytic hydrogen production activity. On the other hand, the excellent catalytic performance of the photocatalyst was benefited by the flower-like microsphere structure of NiCoP, which could provide abundant active sites and a large specific surface area, and promote the adsorption of protons by the photocatalyst. Besides, the phosphating degree of the precursors and the ratio of Cu₃P and NiCoP were adjusted to get the best photocatalyst for hydrogen production, and the H₂ production of the optimal catalyst could reach 8897.44 μmol h^-1 g^-1. This work provides a new understanding for the rational design of heterojunction photocatalysts for outstanding hydrogen production performance.

Hydrogen spillover effect induced by ascorbic acid in CdS/NiO core-shell p-n heterojunction for significantly enhanced photocatalytic H2 evolution

A new variety of CdS/NiO core-shell p-n heterojunction is synthesized by in-situ chemically depositing NiO shell on single-crystal CdS nanorods for the first time. With this method, the range of NiO shell thickness can be accurately controlled within a few nanometers. The optimized CdS/NiO sample (CSN_0.5) with a NiO shell layer of 1.5 nm exhibits a highly efficient photocatalytic H₂ evolution rate of 731.7 μmol/h (corresponding to 243.9 mmol/g/h) without using co-catalyst, which is among the highest value of all the CdS-based photocatalysts. The apparent quantum efficiency (AQE) of CSN_0.5 at 365 nm wavelength reaches 28.19%. The remarkably enhanced photocatalytic performance can be attributed to a hydrogen spillover effect induced by ascorbic acid in CdS/NiO, which promotes the transmission of adsorbed H* from hydrogen-rich NiO (electron-poor region) to hydrogen-poor CdS (electron-rich region) where the adsorbed H* reacts in time with the photogenerated electron to produce H₂, facilitating the H₂ evolution reaction. This work provides a method to promote the photocatalytic H₂ evolution reaction by using hydrogen spillover effect.

Amorphous Co3O4 quantum dots hybridizing with 3D hexagonal CdS single crystals to construct a 0D/3D p-n heterojunction for a highly efficient photocatalytic H2 evolution

Herein, a novel amorphous monodisperse Co3O4 quantum dots/3D hexagonal CdS single crystals (0D/3D Co3O4 QDs/CdS) p-n heterojunction was constructed by a simple hydrothermal and electrostatic self-assembly method. The amorphous monodispersed Co3O4 QDs (≈4.5 nm) are uniformly and tightly attached to the surface of the hexagonal CdS single crystals. The sample, 0.5% CQDs/CdS exhibits outstanding hydrogen evolution activity of 17.5 mmol h-1 g-1 with a turnover number (TON) of 4214, up to 10.3 times higher than that of pure CdS. The enhanced photocatalytic activity can be attributed to the synergistic effect of the p-n heterostructure and the quantum confinement effect of Co3O4 QDs, which significantly promoted the separation efficiency of photo-generated electrons and holes. Additionally, the sulfur vacancy also can act as electron trappers to improve carrier separation and electron transfer. The photoelectrochemical and time-resolved fluorescence (TRPL) results further certify the effective spatial charge separation. This work gives an insight into the design of the 0D/3D Co3O4 QDs/CdS p-n heterostructure for a highly efficient photocatalysis.

Visible-light-driven two dimensional metal-organic framework modified manganese cadmium sulfide for efficient photocatalytic hydrogen evolution

The morphology modification and the construction of heterojunction of the photocatalyst are considered as the main means to significantly improve the performance of photocatalytic hydrogen evolution. In this study, Mn_0.2Cd_0.8S nanorods are successfully assembled on the surface of Ni-MOF-74 with flake morphology. Specifically, the Ni-S bond is constructed between Ni-MOF-74 and Mn_0.2Cd_0.8S, which provides a unique transfer channel for photo-induced carriers. Meanwhile, the electrons in the conduction band of Mn_0.2Cd_0.8S can be injected into the conduction band of Ni-MOF-74 quickly due to the potential energy difference between the two. This shows that the recombination of photogenerated carriers in Mn_0.2Cd_0.8S can be greatly inhibited. Fluorescence spectroscopy and electrochemical characterization reveal that the composite catalyst has the longest carrier lifetime, the fastest charge transfer rate and the lowest overpotential compared with the Mn_0.2Cd_0.8S and Ni-MOF-74. The optimal hydrogen production rate of the composite can reach 7.104 mmol g^-1h^-1, which is 6.96 times that of Mn_0.2Cd_0.8S. This work provides a novel strategy for the modification of MnCdS-based photocatalysts by metal-organic framework materials.

Ni-MOF-74 derived nickel phosphide and In2O3 form S-scheme heterojunction for efficient hydrogen evolution

The composite structure of Ni2P/In2O3 constructs an S-scheme heterojunction that transfers useless electrons and holes to the composite interface for consumption.The loading of In2O3 further increases the photocatalytic hydrogen production activity.

Eosin Y-sensitized rose-like MoSx and CeVO4 construct a direct Z-scheme heterojunction for efficient photocatalytic hydrogen evolution

MoS_x/CeVO₄ was prepared by a simple hydrothermal method and a direct Z-scheme heterojunction was constructed. The existence of heterojunction provides a special transmission path for electron transfer between two materials.