Induced self-enhanced electrochemiluminescence aptamer sensor for 17β-estradiol detection based on nitrogen-doped carbon quantum dots as Ru(dcbpy)32+ coreactant: What role of intermolecular hydrogen bonds play in the system?

17β-estradiol biosensors based on different bioreceptors and their applications

17β-Estradiol (E2) is a critical sex steroid hormone, which has significant effects on the endocrine systems of both humans and animals. E2 is also believed to play neurotrophic and neuroprotective roles in the brain. Biosensors present a powerful tool to detect E2 because of their small, efficient, and flexible design. Furthermore, Biosensors can quickly and accurately obtain detection results with only a small sampling amount, which greatly meets the detection of the environment, food safety, medicine safety, and human body. This review focuses on previous studies of biosensors for detecting E2 and divides them into non-biometric sensors, enzyme biosensors, antibody biosensors, and aptamer biosensors according to different bioreceptors. The advantages, disadvantages, and design points of various bioreceptors for E2 detection are analyzed and summarized. Additionally, applications of different bioreceptors of E2 detection are presented and highlight the field of environmental monitoring, food and medicine safety, and disease detection in recent years. Finally, the development of E2 detection by biosensor is prospected.

Carboxyl groups on carbon nanodots as co-reactant sites for anodic electrochemiluminescence of tris(2,2-bipyridine)ruthenium(II)

Carbon nanodots (C-dots) with good biocompatibility have been extensively utilized as co-reactants for electrochemiluminescence (ECL) of the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) system. However, the ECL intensity of this system is still relatively low and the mechanism of C-dots as co-reactants remains unclear, which greatly limits its further application in bio-analysis. In this work, we revealed that the carboxyl groups on C-dots are co-reactant sites for Ru(bpy)32+ ECL by systematically investigating the contribution of carboxyl, hydroxyl and carbonyl groups on the surface of C-dots to the ECL intensity. Further treatment with hydrogen peroxide to increase the carboxyl-group content on C-dots resulted in a 10-fold increase in ECL intensity over the original Ru(bpy)32+/C-dots system. This work provides new insights for the rational design of ECL systems with C-dots as co-reactants and offers new chances for further applications of C-dots in the field of ECL.

Efficient Electrochemiluminescence Sensing in Microfluidic Biosensors: A Review

Microfluidic devices are capable of handling 10-9 L to 10-18 L of fluids by incorporating tiny channels with dimensions of ten to hundreds of micrometers, and they can be fabricated using a wide range of materials including glass, silicon, polymers, paper, and cloth for tailored sensing applications. Microfluidic biosensors integrated with detection methods such as electrochemiluminescence (ECL) can be used for the diagnosis and prognosis of diseases. Coupled with ECL, these tandem devices are capable of sensing biomarkers at nanomolar to picomolar concentrations, reproducibly. Measurement at this low level of concentration makes microfluidic electrochemiluminescence (MF-ECL) devices ideal for biomarker detection in the context of early warning systems for diseases such as myocardial infarction, cancer, and others. However, the technology relies on the nature and inherent characteristics of an efficient luminophore. The luminophore typically undergoes a redox process to generate excited species which emit energy in the form of light upon relaxation to lower energy states. Therefore, in biosensor design the efficiency of the luminophore is critical. This review is focused on the integration of microfluidic devices with biosensors and using electrochemiluminescence as a detection method. We highlight the dual role of carbon quantum dots as a luminophore and co-reactant in electrochemiluminescence analysis, drawing on their unique properties that include large specific surface area, easy functionalization, and unique luminescent properties.

Materials for Electrochemiluminescence: TADF, Hydrogen-Bonding, and Aggregation- and Crystallization-Induced Emission Luminophores

Electrochemiluminescence (ECL) is a rapidly growing discipline with many analytical applications from immunoassays to single-molecule detection. At the forefront of ECL research is materials chemistry, which looks at engineering new materials and compounds exhibiting enhanced ECL efficiencies compared to conventional fluorescent materials. In this review, we summarize recent molecular design strategies that lead to high efficiency ECL. In particular, we feature recent advances in the use of thermally activated delayed fluorescence (TADF) emitters to produce enhanced electrochemiluminescence. We also document how hydrogen bonding, aggregation, and crystallization can each be recruited in the design of materials showing enhanced electrochemiluminescence.

Signal "On-Amplified-Off" Strategy Based on Hafnium Dioxide Nanomaterials as Electrochemiluminescence Emitters for Progesterone Detection

When consumed, excess progesterone (P4)─found in food and the environment─can lead to severe illnesses in humans. Therefore, quantitative analysis of P4 is critical for identifying its hazardous levels. In this study, a novel signal "on-amplified-off" P4 detection mode was proposed, which was based on the utilization of hafnium oxide (HfO2) as a unique electrochemiluminescence (ECL) emitter, produced by calcining UiO-66(Hf). This is the first time that HfO2 has been used as an ECL emitter. HfO2 displayed excellent conductivity and a high specific surface area, allowing it to connect with numerous aptamers and produce a "signal-on" effect. Ni-doped ZnO (Ni-ZnO) acted as a coreaction accelerator, enhancing the ECL strength of HfO2 by generating more tripropylamine radicals. cDNA was labeled with Ni-ZnO, and Ni-ZnO was linked to the aptamer via base complementary pairing, affording "signal-amplified". The presence of the target molecule P4 instigated a specific binding process with the aptamer, triggering the shedding of cDNA-Ni-ZnO and resulting in "signal-off". This novel "on-amplified-off" strategy effectively improved the sensitivity and specificity of P4 analysis, introducing a practical method for detecting biomolecules beyond the scope of this study, which holds immense potential for future applications.

Electrochemiluminescence immunoassay strategies based on a hexagonal Ru-MOF and MoS2@GO nanosheets: detection of 5-fluorouracil in serum samples

Herein, a competitive-type electrochemiluminescence immunosensor for ultrasensitive detection of 5-fluorouracil (5-FU) was fabricated. Ruthenium(II)-metal-organic framework (Ru-MOF) nanosheets were selected to act a promising ECL luminophore using tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃²⁺) as the organic ligand. The two-dimensional (2D) Ru-MOF nanosheets achieved an increased loading of Ru(dcbpy)₃²⁺ and effectively prevented leakage of the ECL emitter during application, which exhibited satisfactory ECL performance. Thin two-dimensional MoS₂@GO was used to modify the electrode as the sensing platform for improving the electron transfer rate and loading more 5-FU coating antigens due to its large specific surface area and piezoelectric catalytic efficiency. Under the optimized conditions, the proposed immunosensor presented high sensitivity, a wide detection range (0.0001 ng-100 ng mL^-1), a low limit of detection (0.031 pg mL^-1, S/N = 3), good specificity and stability. Furthermore, the immunosensor was successfully applied for the detection of 5-FU in human serum samples with satisfactory results, proving this strategy has potential applications in bioanalysis and clinical diagnosis.

A facile aptamer-based sensing strategy for dopamine detection through the fluorescence energy transfer between dye and single-wall carbon nanohorns

Dopamine (DBA) as an important biomarker, plays a crucial role in disease diagnosis. In this study, we have developed a fast and simple aptamer-based fluorescence strategy which used single-wall carbon nanohorns (SWCNHs) as a quencher for dopamine detection. SWCNHs were negatively charged after pretreated, which improved its dispersion in solution. 5-carboxy-fluorescein (FAM) was used to label dopamine aptamer. In the absence of dopamine, FAM-modified aptamer could be absorbed onto the SWCNHs surface due to π-π interaction, resulting in the fluorescence intensity decreased. Dopamine could specifically bind with FAM-DNA to form G-quadruplex, which could not be absorbed onto the surface of SWCNHs. Hence, the fluorescence of FAM-DNA recovered, and the fluorescent intensity as a function of different concentrations of dopamine was measured. We obtained a detection limit of 5 μM for this detection system with a linear detection range of 0.02-2.20 mM. Furthermore, the feasibility of the innovative detection system has been verified by detecting dopamine in spiked serum samples.

The role of doping strategy in nanoparticle-based electrochemiluminescence biosensing

Doping plays a crucial role in electrochemiluminescence (ECL) due to the followings: (1) Modulation of electronic structure, alteration of the surface state of nanoparticles (NPs), providing effective protection from the surrounding environment, thereby leading to ECL emitters with exceptional properties including tunable spectra, high luminescence efficiency, low excitation potential, and good stability. (2) Employment of doped NPs as promising coreactant alternatives due to the presence of functional groups such as amines induced by NP doping. (3) Serving as novel co-reaction accelerators (CRAs) for ECL through doping induced high catalytic properties. (4) Behaving as excellent carriers to load ECL emitters, recognition elements, and catalysts due to doping-induced larger surface area, higher conductivity and better biocompatibility of NPs. As a consequence, doped NPs have aroused broad interest and found wide applications in various ECL sensing platforms. In this review, the current promising improvements, concepts, and excellent applications of doped NPs for ECL biosensing are addressed. We aim to bring to light the physicochemical characteristics of various doped NPs that endow them with appealing ECL performance, leading to diverse applications in biosensing.

Copper Ion and Ruthenium Complex Codoped Polydopamine Nanoparticles for Magnetic Resonance/Photoacoustic Tomography Imaging-Guided Photodynamic/Photothermal Dual-Mode Therapy

Phototherapy, such as photodynamic therapy (PDT) and photothermal therapy (PTT), refers to the therapeutic strategy using a visible or near-infrared (NIR) laser to generate free radicals or heat for noninvasive and localized tumor treatment. However, limited by the low photoconversion efficiency of therapeutic agents, a single treatment method can hardly lead to complete tumor ablation, even when enhancing the power density of the laser and/or prolonging the irradiation duration. In this work, copper ion and ruthenium complex codoped polydopamine nanoparticles (Cu(II)/LRu/PDA NPs) are designed for PDT/PTT dual-mode therapy. The doped LRu in the NPs can generate reactive oxygen species under visible laser irradiation and enable PDT. Because of the strong absorption in the NIR region, PDA can not only generate heat for PTT under irradiation but also be used for photoacoustic tomography (PAT) imaging. Meanwhile, the doping of Cu(II) in the NPs through the coordination with PDA facilitates T₁-weighted magnetic resonance imaging (MRI). Thus, MR/PAT imaging-guided PDT/PTT dual-mode therapy is achieved. The in vivo experiments indicate that the Cu(II)/LRu/PDA NPs can accumulate in HeLa tumors with a retention rate up to 8.34%ID/g. MR/PAT imaging can clearly identify the location and boundary of the tumors, permitting precise guidance for phototherapy. Under the combined effect of PDT and PTT, a complete ablation of HeLa tumors is achieved. The current work provides an alternative nanoplatform for performing PDT/PTT dual-mode therapy, which can be further guided by MR/PAT imaging.

An ultra-high-sensitivity electrochemiluminescence aptasensor for Pb2+ detection based on the synergistic signal-amplification strategy of quencher abscission and G-quadruplex generation

Signal amplification provides an effective way to improve detection performance. Herein, an ultrasensitive electrochemiluminescence (ECL) aptasensor for Pb²⁺ detection was developed based on a dual signal-amplification strategy of the abscission of a quencher and the generation of a G-quadruplex by one-step and simultaneous way. Nitrogen-doped carbon quantum dots linked with complementary DNA (cDNA-NCQDs) at the sensing interface was applied as the quencher of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl)ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine system to minimize the ECL signal due to the intermolecular hydrogen bond-induced energy-transfer process. Upon the addition of Pb²⁺, its specific binding with the aptamer triggered the abscission of cDNA-NCQDs, accompanied by the formation of G-quadruplex on the surface of the electrode, both of which amplified the intensity of the light emission. The ECL amplification efficiency induced by the above two mechanisms (78.6%) was valuably greater than that of their sum value (69.3%). This synergistic effect resulted in high detection sensitivity of the ECL aptasensor, which allowed to thereby obtain Pb²⁺ measurements in the range of 1 fM - 10 nM with an ultra-low detection limit of 0.19 fM. The Pb²⁺-mediated synergistic signal-amplification ECL strategy can provide a new approach for integrating various amplification strategies.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

A sensitive electrochemiluminescence biosensor for assay of cancer biomarker (MMP-2) based on NGQDs-Ru@SiO2 luminophore

A sensitive biosensor that can be used for the determination of matrix metalloproteinase 2 (MMP-2) was proposed. The biosensor was developed by using an excellent self-enhanced nanocomposites as an illuminant and a peptide as a recognition element. For the electrostatic attraction between Ru(bpy)₃²⁺ and nitrogen-doped graphene quantum dots (NGQDs), the self-enhanced electrochemiluminescence (ECL) nanocomposites of NGQDs-Ru(bpy)₃²⁺-doped silica nanoparticles (NGQDs-Ru@SiO₂) were synthesized through a simple sol-gel process. Then, a specific peptide (labeled sulfhydryl) was combined with the self-enhanced ECL nanocomposites (carboxyl in NGQDs) via acylation reaction to obtain the peptide-NGQDs-Ru@SiO₂ nanoprobe, which was fabricated onto the gold electrode surface via Au-S bond. The peptide of the ECL nanoprobe was exposed to cleavage in the presence of MMP-2, which caused the signal substance to move farther away from the electrode, leading to a decrease of the ECL signal. The proposed NGQDs-Ru@SiO₂-labeled peptide ECL biosensor displayed a lower detection limit of 6.5 pg mL^-1 than those of reported ECL methods. The proposed biosensor provided an outlook for future applications in other disease-associated biomarkers.

Regulation of Ru(bpy)32+ Electrochemiluminescence Based on Distance-Dependent Electron Transfer of Ferrocene for Dual-Signal Readout Detection of Aflatoxin B1 with High Sensitivity

Ferrocene (Fc) is a common quencher of Ru(bpy)₃²⁺ luminescence. However, interactions between Fc and Ru(bpy)₃²⁺ can be extremely complicated. In this work, we reported the first use of Fc to regulate the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ by tuning the length of the DNA sequence between Fc and the luminophore of nitrogen-doped graphene quantum dots-Ru(bpy)₃²⁺-doped silica nanoparticles (SiO₂@Ru-NGQDs). The ECL of SiO₂@Ru-NGQDs was depressed when the distance between Ru(bpy)₃²⁺ and Fc was less than 8 nm; a stronger ECL was observed when the distance was more than 12 nm. The switching of the ECL of Ru(bpy)₃²⁺ by Fc was attributed to the electron transfer mechanism, in which Fc participated in the redox of Ru(bpy)₃²⁺ for "signal-off" ECL; this favored electron transfer at the electrode fabricated with an Fc-labeled aptamer (Fc-apt) and SiO₂@Ru-NGQDs for "signal-on" ECL depending on the length of the DNA sequence. Here, a dual-signal readout aptasensor for aflatoxin B1 (AFB1) detection was developed via the enhanced ECL of SiO₂@Ru-NGQDs by Fc-apt. The redox currents of Fc and the ECL of Ru(bpy)₃²⁺ were simultaneously collected as yardsticks, and both decreased with higher concentrations of AFB1. The aptasensor allowed linear ranges of 3 × 10^-5 to 1 × 10² ng mL^-1 for ECL mode and 1 × 10^-3 to 3 × 10³ ng mL^-1 for electrochemical mode. Our work provides insight into the interactions between Fc and Ru(bpy)₃²⁺. The dual-signal readout strategy is a potential platform for the versatile design of aptasensors.

Facile fabrication of 17β-estradiol electrochemical sensor using polyaniline/carbon dot-coated glassy carbon electrode with synergistically enhanced electrochemical stability

Previous 17β-estradiol sensors required expensive reagents or complicated fabrication of sensing probes. In this work, a cheap, simple, and reusable electrochemical sensor based on commercially available polyaniline (PANI) and carbon dots (CDs) synthesized from iota-carrageenan was developed for the sensitive detection of 17β-estradiol. The sensor was simply prepared by drop-casting CDs/PANI composite on a glassy carbon electrode (GCE) using poly(vinylidene fluoride) as a binder. With synergistic contributions from both CDs and PANI, the CDs-PANI/GCE was much more electrochemically stable than the CDs/GCE or PANI/GCE. The CDs-PANI/GCE was sensitive to 17β-estradiol across a linear range from 0.001 to 100 μmol L^-1 with a detection limit of 43 nmol L^-1. The electrochemical measurement can be performed in 2 min and the probe can be reused for several hundred times. The CDs-PANI/GCE was selective towards 17β-estradiol against several interferences and gave excellent recovery between 94.4 and 103.7 % from real sample analysis. From intensive investigation on electron transfer process and energy levels, the oxidation reaction of 17β-estradiol occurred on the surface of CDs-PANI/GCE via favorable energy levels and dominantly surface adsorption process through π-π stacking and hydrogen bonding between 17β-estradiol and CDs/PANI. Such unique interfacial interactions also resulted in the synergistically enhanced electrochemical stability of the modified electrode.

A Simple and Sensitive Nanogold RRS/Abs Dimode Sensor for Trace As3+ Based on Aptamer Controlled Nitrogen Doped Carbon Dot Catalytic Amplification

Using citric acid (CA) and ethylenediamine (EDA) as precursors, stable nitrogen-doped carbon dots (CD) nanosols were prepared by microwave procedure and characterized in detail. It was found that CD_Ns catalyze ethanol (Et)-HAuCl₄ to generate gold nanoparticles (AuNPs), which have strong surface plasmon resonance, Rayleigh scattering, (RRS) and a surface plasmon resonance (SPR) absorption (Abs) effect at 370 nm and 575 nm, respectively. Compled the new catalytic amplification indicator reaction with the specific As³⁺ aptamer reaction, a new RRS/Abs dual-mode aptamer sensor for the assay of trace As³⁺ was developed, based on the RRS/Abs signals increasing linearly with As³⁺ increasing in the ranges of 5-250 nmol/L and 50-250 nmol/L, whose detection limits were 0.8 nmol/L and 3.4 nmol/L As³⁺, respectively. This analytical method has the advantages of high selectivity, simplicity, and rapidity, and it has been successfully applied to the detection of practical samples.

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.