Magnetic sulfur-doped carbons for mercury adsorption

Adsorption and desorption processes of toxic heavy metals, regeneration and reusability of spent adsorbents: Economic and environmental sustainability approach

A growing number of variables, including rising population, water scarcity, growth in the economy, and the existence of harmful heavy metals in the water supply, are contributing to the increased demand for wastewater treatment on a global scale. One of the innovative water treatment technologies is the adsorptive removal of heavy metals through the application of natural and engineered adsorbents. However, adsorption currently has setbacks that prevent its wider application for heavy metals sequestration from aquatic environments using various adsorbents, including difficulty in selecting suitable desorption eluent to recover adsorbed heavy metals and regeneration techniques to recycle the spent adsorbents for further use and safe disposal. Therefore, the recovery of adsorbed heavy metal ions and the ability to reuse the spent adsorbents is one of the economic and environmental sustainability approaches. This study presents a state-of-the-art critical review of different desorption agents that could be used to retrieve heavy metals and regenerate the spent adsorbents for further adsorption-desorption processes. Additionally, an attempt was made to discuss and summarize some of the independent factors influencing heavy metals desorption, recovery, and adsorbent regeneration. Furthermore, isotherm and kinetic modeling have been summarized to provide insights into the adsorption-desorption mechanisms of heavy metals. Finally, the review provided future perspectives to provide room for researchers and industry players who are interested in heavy metals desorption, recovery, and spent adsorbents recycling to reduce the high cost of adsorbents reproduction, minimize secondary waste generation, and thereby provide substantial economic and environmental benefits.

Sulfur functionalized biocarbon sorbents for low-concentration mercury isolation

Sulfur functionalized biocarbons were prepared from naturally abundant lignin alkali with sodium thiocyanate as an activation agent and a sulfur source. The resultant biocarbon sorbents showed a high mercury isolation ability from aqueous solutions, where high surface area and doping of sulfur significantly aid the uptake of mercury, i.e., 0.05 g of biocarbon sorbent removed 99% of mercury from 250 mL of simulated wastewater with an initial concentration of mercury of 10 mg L-1.

Mercury sources, contaminations, mercury cycle, detection and treatment techniques: A review

Mercury is considered a toxic pollutant harmful to our human health and the environment. Mercury is highly persistent, volatile and bioaccumulated and enters into the food chain, destroying our ecosystem. The levels of mercury in the water bodies as well as in the atmosphere are affected by anthropogenic and natural activities. In this review, the mercury species as well as the mercury contamination towards water, soil and air are discussed in detail. In addition to that, the sources of mercury and the mercury cycle in the aquatic system are also discussed. The determination of mercury with various methods such as with modified electrodes and nanomaterials was elaborated in brief. The treatment in the removal of mercury such as adsorption, electrooxidation and photocatalysis were explained with recent ideologies and among them, adsorption was considered one of the efficient techniques in terms of cost and mercury removal.

Hydrophobic and dispersible Cu(I) desulfurization adsorbent prepared from Pistia stratiotes for efficient desulfurization

Improving the adsorption capacity of adsorbents is a good way to boost their desulfurization efficiency. Optimizing the dispersion of metal nanoparticles and enhancing the stability of the metal valence state are essential to maximizing the adsorption capacity of the metal-loaded desulfurization adsorbent. Pistia stratiotes can absorb the Cu in water and evenly disperse it throughout the plant, allowing the production of a highly dispersed Cu(I) adsorbent (PSAC-Cu(I)). During the usage and storage of PSAC-Cu(I), Cu(I) oxidizes to Cu(II) when it comes in contact with oxygen and water, reducing its adsorptive capacity; hence, we modified PSAC-Cu(I) hydrophobically using polydimethylsiloxane (PDMS) to generate PSAC-Cu(I)-P(200). The outcome of the two-month exposure experiments showed that only 4.7% of the Cu(I) of PSAC-Cu(I)-P(200) was oxidized in the humid atmosphere, whereas PSAC-Cu(I) was almost fully oxidized. Moreover, the dibenzothiophene adsorption capacity of PSAC-Cu(I)-P(200) in a model oil with a water concentration of 250 ppmw is 68 mg g^-1, which is 1.62 times that of PSAC-Cu(I). When 10 wt% toluene was added to the model oil, the adsorption desulfurization capacity of PSAC-Cu(I)-P(200) decreased to 86.8% of the original. This shows that PSAC-Cu(I)-P(200) has good stability and excellent adsorptive desulfurization performance.

Preparation of Sulfur-doped Carbon for Supercapacitor Applications: A Review

Electrochemical capacitors, also known as supercapacitors (SCs), have lately played an important role in energy storage and conversion systems due to their specific characteristics such as high strength, durability, and environmental friendliness. A wide range of materials is used as electrodes for SC applications because the electrochemical efficiency is primarily determined by the electrode materials used. Carbonaceous materials with unique surface, chemical, electrochemical, and electronic characteristics have become attractive for energy storage research, but they cannot meet the rising need for high specific energy and specific power. Besides, heteroatom-doped carbon materials have shown pseudocapacitance characteristics and improved specific energy, specific power, and conductivity. This makes them more adaptable in SC application. Among different heteroatom doping of carbon, S-doped carbon has gained considerable attention in SC applications due to its unpaired electrons and easily polarizable nature. S-doped carbon materials-based SCs have demonstrated enhanced surface wettability, improved conductivity, and induced pseudocapacitance effect, thereby delivering improved specific energy and specific power. Many reports on S-doped carbon for SC applications have been published, but there is no specific Review on the preparation of S-doped carbon for SC applications. This Review focuses on recent developments in the field of SC electrodes made from S-doped carbon materials. Herein, the preparation methods and applications of S-doped carbon for SCs were summarized following a brief discussion of different electrochemical characterization techniques of SCs. Finally, the challenges of S-doped carbon materials and their potential prospects were discussed to give crucial insights into the favorable factors for future innovations of SC electrodes. This Review aims to provide insight for further research on the preparation of S-doped carbon for electrochemical energy storage applications.

Magnetic responsive composites made from a sulfur-rich polymer

A magnetic responsive composite was made from a sulfur-rich polymer and iron nanoparticles. Diverse applications in mercury remediation, microwave curing, and magnetic responsive actuators were demonstrated.

Novel adsorbent based on carbon-modified zirconia/spinel ferrite nanostructures: Evaluation for the removal of cobalt and europium radionuclides from aqueous solutions

Herein, a novel adsorbent based on carbon-modified zirconia/spinel ferrite (C@ ZrO₂/Mn_0.5Mg_0.25Zn_0.25Fe₂O₄) nanostructures were chemically prepared to remove ⁶⁰Co and ^152+154Eu radionuclides from liquid media using batch experiments. The XRD pattern confirms the successful preparation of the C@ZrO₂/MnMgZnFe₂O₄ composite. Also, SEM and TEM images confirmed that the composite owns a heterogeneous morphology in the nanoscale range. The optical band gap value of Mn_0.5Mg_0.25Zn_0.25Fe₂O₄, ZrO₂, and the composite samples was 1.45, 2.38, and 1.54 eV, respectively. Many parameters have been studied as the effect of time, solution pH, and initial ion concentration. The kinetics models for the removal process of ^152+154Eu and ⁶⁰Co radionuclides were studied. The second-order kinetic equation could describe the sorption kinetics for both radionuclides. The Langmuir monolayer capacity for ⁶⁰Co was 82.51 mg/g and for ^152+154Eu was 136.98 mg/g. The thermodynamic parameters such as free energy ΔG^o, the enthalpy ΔH^o, and the entropy ΔS^o were calculated. The results indicated that the sorption process has endothermic nature for both two radionuclides onto C@ZrO₂/MnMgZnFe₂O₄ composite.