Constructing an ohmic junction of copper@ cuprous oxide nanocomposite with plasmonic enhancement for photocatalysis

Synthesis of MoS2@MoO3/(Cu+/g-C3N4) ternary composites with double S-scheme heterojunction for peroxymonosulfate activation exposing to visible light

The construction of semiconductor heterojunction is an effective way for charge separation in photocatalytic degradation of pollutants. In this study, a novel MoS2@MoO3/(Cu+/g-C3N4) ternary composites (MMCCN) was prepared via a simple calcination method. The as-prepared composites exhibited exceptional performance in activating peroxymonosulfate (PMS) for the degradation of rhodamine B (RhB). The activity testing results indicated that 99.41 % of RhB (10 mg·L-1, 10 mL) was effectively removed by the synergistic effect of composites photocatalyst (0.1 g·L-1) and PMS (0.1 g·L-1) under visible light irradiation for 40 min. Its reaction rate constant exceeded that of Cu+/g-C3N4, MoO3 and MoS2 by a factor of 3.56, 17.30 and 11.73 times, respectively. The crystal structure, band gap and density of states (DOS) of the semiconductors were calculated according to the density functional theory (DFT). Free radical trapping tests and electron spin resonance spectroscopy validated that 1O2, O2- and h+ are primary reactive species participating in the decomposition of RhB. The ternary composites demonstrated good stability and maintained excellent degradation efficiency even across four reaction cycles. Furthermore, the activation mechanism and the intermediates produced during the decomposition course of RhB by MMCCN/PMS/vis system were analyzed and elucidated. A double S-scheme heterojunctions was responsible for efficient separation of photo-induced electron-hole pairs. This work presents a novel method in the construction of double S-scheme heterojunctions for PMS activation which is expected to find wide applications in wastewater treatment and environmental remediation.

Constructing copper Phthalocyanine/Molybdenum disulfide (CuPc/MoS2) S-scheme heterojunction with S-rich vacancies for enhanced Visible-Light photocatalytic CO2 reduction

Constructing a heterojunction by combining two semiconductors with similar band structures is a successful approach to obtaining photocatalysts with high efficiency. Herein, a CuPc/DR-MoS2 heterojunction involving copper phthalocyanine (CuPc) and molybdenum disulfide with S-rich vacancies (13.66%) is successfully prepared by the facile hydrothermal method. Experimental results and theoretical calculations firmly demonstrated that photoelectrons exhibit an S-scheme charge transfer mechanism in the CuPc/DR-MoS2 heterojunction. The S-scheme heterojunction system has proven significant advantages in promoting the charge separation and transfer of photogenerated carriers, enhancing visible-light responsiveness, and achieving robust photoredox capability. As a result, the optimized 3CuPc/DR-MoS2 S-scheme heterojunction exhibits photocatalytic yields of CO and CH4 at 200 and 111.6 μmol g-1h-1, respectively. These values are four times and 4.5 times greater than the photocatalytic yields of pure DR-MoS2. This study offers novel perspectives on the advancement of innovative and highly effective heterojunction photocatalysts.

Preparation of core-shell structure Ag@TiO2 plasma photocatalysts and reduction of Cr(VI): Size dependent and LSPR effect

The poor light absorption and low carrier separation efficiency of Titanium dioxide (TiO2) limit its further application. The introduction of plasma metal Ag have the potential to solve these drawbacks owing to its plasma resonance effect. Thus core-shell structure Ag@TiO2 plasma photocatalysts was prepared by using facile reduction method in this work. More specifically, Ag@TiO2 composite catalysts with different Ag loading amounts were prepared in the presence of surfactant PVP. Ag@TiO2 demonstrates excellent light absorption performance and photoelectric separation efficiency compared with pure TiO2. As a result, it displays excellent performance of Cr(VI) reduction under visible light. The optimal composite catalysts Ag@TiO2-5P achieves exceptional visible-light-driven photocatalytic Cr(VI) reduction efficiency of 0.01416 min-1 that is 2.29 times greater than pure TiO2. To investigate the role of PVP, we also synthesized Ag@TiO2-5 without PVP. The experimental results show that although Ag@TiO2-5 Cr(VI) reduction performance is superior to pure TiO2, it significantly decreases compared with Ag@TiO2-5P. The results of TEM and optoelectronic testing show that agglomeration of Ag particles leads to a decrease in the photoelectric separation efficiency of Ag@TiO2-5. The smaller Ag particles provide more active sites and demonstrating a stronger overall local surface plasmon resonance (LSPR) effect. DMPO spin-trapping ESR spectra testing indicates that ∙O2- and ∙OH are the main reactive species. This research provides a potential strategy to prepare Ag-based plasma photocatalysts for environment protection.

Chitosan synergizes with bismuth-based metal-organic frameworks to construct double S-type heterojunctions for enhancing photocatalytic antimicrobial activity

In recent years, photocatalytic technology has been introduced to develop a new kind antimicrobial agents fighting antibiotic abusing and related drug resistance. The efforts have focused on non-precious metal photocatalysts along with green additives. In the present work, a novel bis-S heterojunctions based on the coupling of polysaccharide (CS) and bismuth-based MOF (CAU-17) s synthesized through a two-step method involving amidation reaction under mild conditions. The as prepared photocatalyst literally extended the light response to the near-infrared region. Owing to its double S-type heterostructure, the lifetime of the photocarriers is significantly prolonged and the redox capacity are enhanced. As a result, the as prepared photocatalyst indicated inhibition up to 99.9 % under 20 min of light exposure against Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria as well as drug-resistant bacteria (MRSA). The outstanding photocatalytic performance is attributed to the effective charge separation and migration due to the unique double S heterostructure. Such a double S heterostructure was confirmed through transient photocurrent response, electrochemical impedance spectroscopy tests and electron spin resonance measurements. The present work provides a basis for the simple synthesis of high-performance heterojunction photocatalytic inhibitors, which extends the application of CAU-17 in environmental disinfection and wastewater purification.

Construction of novel Ag/AgI/Bi4Ti3O12 plasmonic heterojunction: A study focusing on the performance and mechanism of photocatalytic removal of tetracycline

As a result of the insufficient absorption of visible light, the application of Bi4Ti3O12 in the field of photocatalysis is limited. Ag/AgI was uniformly modified on the surface of the nanoflower bulb of Bi4Ti3O12 by simple precipitation method and photodeposition. The fabricated Ag/AgI/Bi4Ti3O12 obtained an ultra-high tetracycline (TC) removal rate under visible light irradiation. And the synergetic effects caused by the surface plasmon resonance (SPR) effect of Ag, the photosensitivity of AgI and the p-n heterojunction are the key to improving the photocatalytic performance of materials. Besides, four plausible photodegradation pathways of TC were proposed and its intermediates were evaluated for toxicity, showing a significant decrease in toxicity after photoreaction.

Integration of ohmic junction and step-scheme heterojunction for enhanced photocatalysis

A novel and efficient photocatalyst, Cu2WS4/MoS2-Au plasmonic Step-scheme (S-scheme) heterojunction, was constructed for the first time and applied to remove environmental pollutants. Among all the prepared photocatalysts, the. Cu2WS4/MoS2-Au-5 exhibited the highest catalytic activity with an 89.1% reduction efficiency for Cr6+ and a 98.7% oxidation efficiency for Benzophenone-1 (BP-1) under visible light irradiation. The Cu2WS4/MoS2-Au photocatalyst exhibits stable performance and efficient photocatalytic activity due to effective charge separation, enhanced light absorption from localized surface plasmon resonance (LSPR) of gold nanoparticles, and the formation of an S-scheme heterojunction with strong oxidation-reduction capabilities. In addition, through analysis of experiments and theoretical calculations, it is speculated that the Cu2WS4/MoS2-Au follows a typical S-scheme photogenerated carrier transferring mechanism, which is verified by the finite difference time domain simulation, the free radical quenching experiments, the electron paramagnetic resonance analysis and the simulated charge density distribution. More importantly, the simulations of the work function and charge density distribution confirm the built-in electric field and the ohmic junction have been established at the interfaces between the Cu2WS4 and MoS2 (Cu2WS4/MoS2) as well as the interface between MoS2 and Au (MoS2-Au), respectively. The built-in electric field and ohmic junction enable efficient separation of photogenerated electrons and holes, ensuring the superior catalytic oxidation and reduction activities of the Cu2WS4/MoS2-Au photocatalyst. Finally, we propose a photocatalytic mechanism for the Cu2WS4/MoS2-Au plasmonic S-scheme heterojunction based on experimental results and simulated calculations. The research results of this study are significance for the development of the plasmonic S-scheme photocatalytic system.

Nanoremediation strategies to address environmental problems

A rapid rise in population, extensive anthropogenic activities including agricultural practices, up-scaled industrialization, massive deforestation, etc. are the leading causes of environmental degradation. Such uncontrolled and unabated practices have affected the quality of environment (water, soil, and air) synergistically by accumulating huge quantities of organic and inorganic pollutants in it. Environmental contamination is posing a threat to the existing life on the Earth, therefore, demands the development of sustainable environmental remediation approaches. The conventional physiochemical remediation approaches are laborious, expensive, and time-consuming. In this regard, nanoremediation has emerged as an innovative, rapid, economical, sustainable, and reliable approach to remediate various environmental pollutants and minimize or attenuate the risks associated with them. Owing to their unique properties such as high surface area to volume ratio, enhanced reactivity, tunable physical parameters, versatility, etc. nanoscale objects have gained attention in environmental clean-up practices. The current review highlights the role of nanoscale objects in the remediation of environmental contaminants to minimize their impact on human, plant, and animal health; and air, water, and soil quality. The aim of the review is to provide information about the applications of nanoscale objects in dye degradation, wastewater management, heavy metal and crude oil remediation, and mitigation of gaseous pollutants including greenhouse gases.

Enhanced plasmonic photocatalytic performance of C3N4/Cu by the introduction of a reduced graphene oxide interlayer

Cu nanoparticles (NPs) are low-cost surface plasmonic resonance (SPR) metal nanostructures, and their SPR properties can be used to enhance the photocatalytic hydrogen evolution performance of carbon nitride (C₃N₄). But their actual performance is usually limited, and one key factor is their poor interfacial quality. In this work, a highly conductive reduced graphene oxide (RGO) interlayer is introduced between protonated C₃N₄ (PCN) nanosheets and Cu NPs, which can act as an efficient sink for photogenerated electrons from C₃N₄ and hot electrons from Cu NPs, and simultaneously serve as reaction sites for the hydrogen evolution reaction, and accelerate the charge transport by the formed C-O-C and C-O-Cu bonds. The optimal hydrogen evolution rate of the optimized PCN/RGO/Cu is 1.30 mmol g^-1 h^-1, which is 6.76, 2.47 and 2.41 times that of PCN, PCN/RGO and PCN/Cu, respectively, and it can further reach up to 13.22 mmol g^-1 h^-1 by loading moderate Pt NPs. Meanwhile, the introduced RGO can effectively anchor Cu NPs to enhance the stability of the photocatalyst. In addition, due to the broad SPR response of Cu NPs, a near-infrared photocatalytic performance is realized for PCN/RGO/Cu with an apparent quantum efficiency of 0.46% at 765 nm.

Boosted visible-light-driven degradation over stable ternary heterojunction as a plasmonic photocatalyst: Mechanism exploration, pathway and toxicity evaluation

The incorporation of plasmonic metals into semiconductors forming heterojunction photocatalysts is a promising route to enhance the photocatalytic performance in visible light. In this work, we reported the visible-light-driven one-dimensional (1D) nanostick silver/silver sulfide (Ag/Ag₂S) photocatalyst combining with two-dimensional (2D) nanosheet reduced graphene oxide intersected by hollow structure (h-RGO) was prepared via a feasible approach at room temperature. The density of Ag depositing on the surface of Ag₂S was easily tuned by the concentration of sodium borohydride and the silicon dioxide nanospheres were employed as templates in the preparation of h-RGO by the layer-by-layer (LBL) assembly. The ternary plasmonic Ag/Ag₂S/h-RGO photocatalysts exhibited better photocatalytic performance for degradation of naphthalene (95.95%) and 1-naphthol (98.65%) under visible light than the pure Ag₂S, composite Ag/Ag₂S and composite Ag/Ag₂S/RGO. Localized surface plasmon resonance of Ag, heterojunction formed between Ag/Ag₂S and RGO and the unique characteristics of h-RGO, which included higher specific surface areas, more efficient reflections of light and more active sites than RGO for boosting separation efficiency of charge carriers, were all responsible for such enhancement. By combining the characterization results with various computations, the mechanism, potential degradation pathways and the toxicity of the generated intermediates for photodegradation were examined. In addition to offering profound insight into the expansion of effective plasmonic photocatalysts with novel structures, the current study is beneficial to ease the environmental crisis to a certain extent.

Metallic zirconium carbide mediated near-infrared driven photocatalysis and photothermal sterilization for multidirectional water purification

Undoubtedly, taking full advantage of near-infrared light (NIR) for the photocatalytic reaction is a promising way to realize the efficient utilization of solar energy. In this work, zirconium carbide (ZrC) has been exploited as a NIR-driven photoactive substance for the simultaneous photodegradation of organic pollutants and photothermal sterilization of Escherichia coli (E. coli). The metallic nature and NIR-responsive localized surface plasmon resonance (LSPR) behaviors of ZrC are revealed by both experimental evidence and density function theory (DFT) calculations. ZrC exhibits extremely wide spectral absorbance, excellent NIR-triggered photosensitive effect and photothermal conversion efficiency. Activation kinetics was performed with DFT to investigate the activation process of O₂ to •O₂^-. In addition, a possible NIR-mediated photocatalytic mechanism of ZrC was proposed on the basis of above DFT simulation and radical scavenging experiments. Metallic ZrC with NIR-responsive activity provides a new perspective for designing full-spectrum-driven photocatalysts.

Engineering Heterostructures of Layered Double Hydroxides and Metal Nanoparticles for Plasmon-Enhanced Catalysis

Artificially designed heterostructures formed by close conjunctions of plasmonic metal nanoparticles (PNPs) and non-plasmonic (2D) lamellar nanostructures are receiving extensive interest. The synergistic interactions of the nanounits induce the manifestation of localized surface plasmon resonance (LSPR) in plasmonic metals in the specific environment of the 2D-light absorbing matrix, impacting their potential in plasmon enhanced catalysis. Specifically, layered double hydroxides (LDH) with the advantages of their unique 2D-layered structure, tuned optical absorption, ease of preparation, composition diversity, and high surface area, have emerged as very promising candidates for obtaining versatile and robust catalysts. In this review, we cover the available PNPs/LDH heterostructures, from the most used noble-metals plasmonic of Au and Ag to the novel non-noble-metals plasmonic of Cu and Ni, mainly focusing on their synthesis strategies toward establishing a synergistic response in the coupled nanounits and relevant applications in plasmonic catalysis. First, the structure–properties relationship in LDH, establishing the desirable features of the 2D-layered matrix facilitating photocatalysis, is shortly described. Then, we address the recent research interests toward fabrication strategies for PNPs/support heterostructures as plasmonic catalysts. Next, we highlight the synthesis strategies for available PNPs/LDH heterostructures, how these are entangled with characteristics that enable the manifestation of the plasmon-induced charge separation effect (PICS), co-catalytic effect, or nanoantenna effect in plasmonic catalysis with applications in energy related and environmental photocatalysis. Finally, some perspectives on the challenges and future directions of PNPs/LDHs heterostructures to improve their performance as plasmonic catalysts are discussed.