Hierarchical core-shell nickel hydroxide@nitrogen-doped hollow carbon spheres composite for high-performance hybrid supercapacitor

Fabrication of a vanadium-doped Ni-MOF with a hydrangea-like morphology as an electrode for high-performance supercapacitors

In this work, we successfully fabricated a vanadium-doped Ni-MOF (NiV-MOF) with a three-dimensional hydrangea-like morphology via a simple one-pot hydrothermal synthesis method. As an electrode material, the Ni0.9V0.1-MOF demonstrated superior performance, achieving a specific capacitance of 1182 F g-1 at a current density of 1 A g-1.

One-Step Hydrothermal Synthesis of Glucose-Induced Low Crystallinity NiCo-Based Layered Double Hydroxides for High-Performance Asymmetric Supercapacitors

In order to improve the electrochemical performance of NiCo-based layered double hydroxide (NiCoLDH), the synthesis of low-crystallinity NiCoLDH was induced by the adsorption of glucose and NiCoLDH. The results showed that glucose could not only effectively regulate the pore structure and morphology of NiCoLDH, but also had a regular effect on crystallinity. Pure phase NiCoLDH had higher crystallinity. When the mass of glucose is 0.05 g, the prepared NiCoLDH-0.05 is a short-range ordered structure embedded in the amorphous matrix. The crystallinity of the product decreases further with the further increase of glucose mass. Since the ordered structures have higher electrical conductivity, and amorphous structures have more defects and active sites, the structure of NiCoLDH-0.05 is conducive to achieving the best electrochemical performance. Electrochemical test results show that NiCoLDH-0.05 has a high specific capacitance, about 12 times that of the pure phase NiCoLDH, the mass of glucose is higher than or below 0.05 g, the specific capacitance will be further reduced. NiCoLDH-0.05 and activated carbon assembled into an asymmetric supercapacitor have a power density of 400 W kg-1 at an energy density of 32.7 Wh kg-1. This study provides a new idea for obtaining excellent electrochemical properties by adjusting LDH crystallinity.

Core-shell structured MgCo2O4@Ni(OH)2 nanorods as electrode materials for high-performance asymmetric supercapacitors

In the field of energy storage, supercapacitors have received extensive attention in recent years. However, achieving the expected electrochemical performance and energy density of supercapacitors is still a huge challenge. The design and synthesis of binder-free composite electrode with core-shell structure is an effective strategy to improve the electrochemical performance of supercapacitors. In this paper, a heterogeneous core-shell structured and binder-free electrode material MgCo2O4@Ni(OH)2 (MCO@NH) grown on nickel foam (NF) is prepared by a simple hydrothermal and oil bath method. The unique core-shell structure makes the MCO@NH have a large specific surface area, which provides abundant active sites for ion transport and storage, thereby improving the electrochemical performance. The MCO@NH/NF nanocomposite demonstrates a high specific capacitance (Cs) of 1583 F g-1 at 1 A/g. A solid-state asymmetric supercapacitor (ASC) assembled with MCO@NH/NF and active carbon (AC) exhibits excellent energy density (45 Wh kg-1 at 457.5 W kg-1) and outstanding capacitance (89.51 %) and coulombic efficiency (97.8 %) after 12,000 cycles, evidencing its good operation stability and potential practical applications. Therefore, the prepared core-shell MCO@NH/NF electrode can be a promising candidate for energy storage devices.

Controlled Hierarchical Construction of Ultrahomogeneous Co9S8@CoAl-LDH/NF Layered Core-Shell Heterostructures for High-Performance Asymmetric Supercapacitors

The rational collocation and construction of multiphase composite electrode materials with ingenious structures is a key strategic to enhance the electrochemical performance of supercapacitors (SCs). Within this project, a unique Co9S8@CoAl-LDH/NF core-shell heterostructure consisting of CoAl-LDH/NF ultrathin nanosheets sturdily attached to Co9S8/NF needle-like nanorods is grown in situ on self-supported conductive substrate nickel foam (NF) by an effortless and productive multistep hydrothermal method. The construction of the core-shell structure can effectively enhance the capacitive properties as well as the mechanical strength of the material. Compared with the single-component materials Co9S8/NF (1769.6 mF cm-2 and 91.6%) and CoAl-LDH/NF (858 mF cm-2 and 85.2%), the Co9S8@CoAl-LDH/NF composites have excellent capacitance properties (5052.4 mF cm-2) along with exceptional capacitance retention (5000 cycles) 98.5% even after undergoing charging and discharging. Furthermore, the asymmetric SCs fabricated with Co9S8@CoAl-LDH/NF and AC/NF exhibit an energy density of 0.17 mWh cm-2 at 3.20 mW cm-2. Therefore, the innovative core-shell heterostructure of Co9S8@CoAl-LDH/NF presented in this study holds immense practical potential as a groundbreaking electrode material in the realm of SCs.

Strategy for predicting catalytic activity of catalysts with hierarchical nanostructures

Three-dimensional hierarchical nanostructures have been employed as electrodes of solid oxide fuel cells (SOFCs) to notably improve the catalytic performance. Hierarchical nanoscale porous electrodes face a trade-off: macroscale pores enhance mass transfer but reduce the number of active sites, while microscale pores increase the number of active sites at the cost of higher transport resistance. Careful design of these structures is crucial for balancing mass transfer and reaction dynamics. A three-dimensional multiphysics model is developed in this paper to examine the influence of different hierarchical geometrical nanostructures on catalytic performance. Additionally, the effects of different diffusion coefficients are also investigated in this study to present the changes in catalytic activity in diffusion, mixed, and reaction-controlled regimes. The model shows good alignment with the experimentally obtained data. An improved Thiele modulus is formulated to quantitatively evaluate the efficiencies of complex hierarchical nanostructures by considering the detailed characteristics of the main and secondary structures.

Constructing Hierarchical CoGa2O4-S@NiCo-LDH Core-Shell Heterostructures with Crystalline/Amorphous/Crystalline Heterointerfaces for Flexible Asymmetric Supercapacitors

The rational design and construction of composite electrodes are crucial for overcoming the issues of poor working stability and slow ionic electron mobility of a single component. Nevertheless, it is a big challenge to construct core-shell heterostructures with crystalline/amorphous/crystalline heterointerfaces in straightforward and efficient methods. Here, we have successfully converted a portion of crystalline CoGa2O4 into the amorphous phase by employing a facile sulfidation process (denoted as CoGa2O4-S), followed by anchoring crystalline NiCo-layered double hydroxide (denoted as NiCo-LDH) nanoarrays onto hexagonal plates and nucleation points of CoGa2O4-S, synthesizing dual-type hexagonal and flower-like 3D CoGa2O4-S@NiCo-LDH core-shell heterostructures with crystalline/amorphous/crystalline heterointerfaces on carbon cloth. Furthermore, we further adjust the Ni/Co ratio in LDH, achieving precise and controllable core-shell heterostructures. Benefiting from the abundant crystalline/amorphous/crystalline heterointerfaces and synergistic effect among various components, the CoGa2O4-S@Ni2Co1-LDH electrode exhibits a specific capacity of 247.8 mAh·g-1 at 1 A·g-1 and good rate performance. A CoGa2O4-S@Ni2Co1-LDH//AC flexible asymmetric supercapacitor provides an energy density of 58.2 Wh·kg-1 at a power density of 850 W·kg-1 and exhibits an impressive capacitance retention of 105.7% after 10,000 cycles at 10 A·g-1. Our research provides profound insights into the design of other similar core-shell heterostructures.

Regulating the Oxygen Vacancy and Electronic Structure of NiCo Layered Double Hydroxides by Molybdenum Doping for High-Power Hybrid Supercapacitors

Amelioration of nickel-cobalt layered double hydroxides (NiCo-LDH) with a high specific theoretical capacitance is of great desire for high-power supercapacitors. Herein, a molybdenum (Mo) doping strategy is proposed to improve the charge-storage performance of NiCo-LDH nanosheets growing on carbon cloth (CC) via a rapid microwave process. The regulation of the electronic structure and oxygen vacancy of the LDH is consolidated by the density functional theory (DFT) calculation, which demonstrates that Mo doping narrows the band gap, reduces the formation energy of hydroxyl vacancies, and promotes ionic and charge transfer as well as electrolyte adsorption on the electrode surface. The optimal Mo-doped NiCo-LDH electrode (MoNiCo-LDH-0.05/CC) has an amazing specific capacity of 471.1 mA h g-1 at 1 A g-1 , and excellent capacity retention of 84.8% at 32 A g-1 , far superior to NiCo-LDH/CC (258.3 mA h g-1 and 76.4%). The constructed hybrid supercapacitor delivers an energy density of 103.3 W h kg-1 at a power density of 750 W kg-1 and retains the cycle retention of 85.2% after 5000 cycles. Two assembled devices in series can drive thirty LED lamps, revealing a potential application prospect of the rationally synthesized MoNiCo-LDH/CC as an energy-storage electrode material.

Concave Ni(OH)2 Nanocube Synthesis and Its Application in High-Performance Hybrid Capacitors

The controlled synthesis of hollow structure transition metal compounds has long been a very interesting and significant research topic in the energy storage and conversion fields. Herein, an ultrasound-assisted chemical etching strategy is proposed for fabricating concave Ni(OH)2 nanocubes. The morphology and composition evolution of the concave Ni(OH)2 nanocubes suggest a possible formation mechanism. The as-synthesized Ni(OH)2 nanostructures used as supercapacitor electrode materials exhibit high specific capacitance (1624 F g-1 at 2 A g-1) and excellent cycling stability (77% retention after 4000 cycles) due to their large specific surface area and open pathway. In addition, the corresponding hybrid capacitor (Ni(OH)2//graphene) demonstrates high energy density (42.9 Wh kg-1 at a power density of 800 W kg-1) and long cycle life (78% retention after 4000 cycles at 5 A g-1). This work offers a simple and economic approach for obtaining concave Ni(OH)2 nanocubes for energy storage and conversion.

Heterostructured Ni3B/Ni nanosheets for excellent microwave absorption and supercapacitive application

The development of electronic information technology has placed higher demands on microwave absorption materials (MAMs), especially the exploration of novel MAMs to broaden their application. At present, little attention has been given the wave absorption properties of transition metal borides (TMBs). In this work, a simple and economical method is developed to prepare Ni₃B/Ni heterostructure nanosheets and their possible applications for microwave absorption (MA) and supercapacitor are evaluated. It is worth noting that Ni₃B/Ni nanosheets exhibit excellent MA properties due to the aggregated nanosheet-like morphology of Ni₃B/Ni with enhancing interfacial polarization, as well as the synergistic effect of dielectric and magnetic losses. It is observed in experiments that the minimum reflection loss value of Ni₃B/Ni is -41.60 dB at 16.8 GHz. Moreover, the maximum effective absorption bandwidth can reach 3.28 GHz. Furthermore, Ni₃B/Ni has good energy storage characteristics and is able to provide a specific capacity of 1150.6F g^-1 at a current density of 1 A g^-1. Meanwhile, it has the ability to maintain an initial capacity of 74.4 % after 1000 cycles at a current density of 10 A g^-1. Therefore, this study provides an idea to explore TMBs as high-performance MA and supercapacitor materials.

Dandelion-Like CuCo2O4@ NiMn LDH Core/Shell Nanoflowers for Excellent Battery-Type Supercapacitor

Dandelion-like CuCo₂O₄ nanoflowers (CCO NFs) with ultrathin NiMn layered double hydroxide (LDH) shells were fabricated via a two-step hydrothermal method. The prepared CuCo₂O₄@NiMn LDH core/shell nanoflowers (CCO@NM LDH NFs) possessed a high specific surface area (~181 m²·g^-1) with an average pore size of ~256 nm. Herein, the CCO@NM LDH NFs exhibited the typical battery-type electrode material with a specific capacity of 2156.53 F·g^-1 at a current density of 1 A·g^-1. With the increase in current density, the rate capability retention was 68.3% at a current density of 10 A·g^-1. In particular, the 94.6% capacity of CCO@NM LDH NFs remains after 2500 cycles at 5 A·g^-1. An asymmetric supercapacitor (ASC) with CCO@NM LDH NFs//activated carbon (AC) demonstrates a remarkable capacitance of 303.11 F·g^-1 at 1 A·g^-1 with excellent cycling stability. The coupling and synergistic effects of multi-valence transition metals provide a convenient channel for the electrochemical process, which is beneficial to spread widely within the realm of electrochemical energy storage.