Construction of graphene oxide-coated zinc tetraphenyporphyrin nanostructures for photocatalytic CO2 reduction to highly selective CH4 product

Constructing cuprous oxide-modified zinc tetraphenylporphyrin ultrathin nanosheets heterojunction for enhanced photocatalytic carbon dioxide reduction to methane

The application of supermolecular naonostructures in the photocatalytic carbon dioxide reduction reaction (CO2RR) has attracted increasing attentions. However, it still faces significant challenges, such as low selectivity for multi-electron products and poor stability. Here, the cuprous oxide (Cu2O)-modified zinc tetraphenylporphyrin ultrathin nanosheets (ZnTPP NSs) are successfully constructed through the aqueous chemical reaction. Comprehensive characterizations confirm the formation of type-II heterojunction between Cu2O and ZnTPP in Cu2O@ZnTPP, and the electron transfer from Cu2O to ZnTPP through the Zn-O-Cu bond under the static contact. Under the visible-light irradiation (λ > 420 nm), the optimized Cu2O@ZnTPP sample as catalyst for photocatalytic CO2RR exhibits the methane (CH4) evolution rate of 120.9 μmol/g/h, which is ∼ 4 and ∼ 10 times those of individual ZnTPP NSs (28.0 μmol/g/h) and Cu2O (12.8 μmol/g/h), respectively. Meanwhile, the CH4 selectivity of ∼ 98.7 % and excellent stability can be achieved. Further experiments reveal that Cu2O@ZnTPP has higher photocatalytic conversion efficiency than Cu2O and ZnTPP NSs, and the photoinduced electron transfer from ZnTPP to Cu2O can be identified via the path of ZnTPP→ (ZnTPP•ZnTPP)*→ ZnTPP-→ Zn-O-Cu → Cu2O. Consequently, Cu2O@ZnTPP exhibits a shorter electron-hole separation lifetime (3.3 vs. 9.3 ps) and a longer recombination lifetime (23.1 vs. 13.4 ps) than individual ZnTPP NSs. This work provides a strategy to construct the organic nanostructures for photocatalytic CO2RR to multi-electron products.

Defective Nb2C MXene Cocatalyst on TiO2 Microsphere for Enhanced Photocatalytic CO2 Conversion to Methane

Sustainable and scalable solar-energy-driven CO2 conversion into fuels requires earth-abundant and stable photocatalysts. In this work, a defective Nb2C MXene as a cocatalyst and TiO2 microspheres as photo-absorbers, constructed via a coulombic force-driven self-assembly, is synthesized. Such photocatalyst, at an optimized loading of defective Nb2C MXene (5% def-Nb2C/TiO2), exhibits a CH4 production rate of 7.23 µmol g-1 h-1, which is 3.8 times higher than that of TiO2. The Schottky junction at the interface improves charge transfer from TiO2 to defective Nb2C MXene and the electron-rich feature (nearly free electron states) enables multielectron reaction of CO2, which apparently leads to high activity and selectivity to CH4 (sel. 99.5%) production. Moreover, DFT calculation demonstrates that the Fermi level (EF) of defective Nb2C MXene (-0.3 V vs NHE) is more positive than that of Nb2C MXene (-1.0 V vs NHE), implying a strong capacity to accept photogenerated electrons and enhance carrier lifetime. This work gives a direction to modify the earth-abundant MXene family as cocatalysts to build high-performance photocatalysts for energy production.

Nitrogen vacancy-induced spin polarization of ultrathin zinc porphyrin nanosheets for efficient photocatalytic CO2 reduction

Metalloporphyrin compounds have excellent electron transfer and visible light absorption ability, demonstrating broad application prospects in the field of photocatalysis. In this work, the nitrogen vacancies (NVs) were successfully introduced into zinc porphyrin (ZnTCPP) ultrathin nanosheets through surface N2 plasma treatment, which is environmentally friendly and can react in low temperatures. Furthermore, the prepared nitrogen vacancies-zinc porphyrin (NVs-ZnTCPP) materials exhibited excellent photocatalytic CO2 reduction activity and selectivity, specifically, the CO production rate of ZnTCPP-1 (N2 plasma treatment, 1 min) achieved as high as 12.5 µmol g-1h-1, which is about 2.7 times greater than that of untreated ZnTCPP. Based on the experimental and density functional theory calculation (DFT) results, it is found that the promoted photocatalytic performance of NVs-ZnTCPP could be mainly attributed to nitrogen vacancy-induced spin polarization by reducing the reaction barriers and inhibiting the recombination of photoexcited carriers. This work provides a new perspective for the construction of vacancy-based metalloporphyrin, and further explores the intrinsic mechanism between the electron spin property and the performance of the photocatalyst.

Facile synthesis of a GO-g-C3N4/BaTiO3 ternary nanocomposites for visible-light-driven photocatalytic degradation of rhodamine B

Photogenerated charge carriers can undergo rapid recombination in conventional photocatalyst systems, reducing their photocatalytic efficiency. To address this bottleneck, a g-C3N4/BaTiO3 (CNB) heterojunction composite was decorated with different mass ratios of graphene oxide (GO) to form a novel visible-light responsive ternary GO-g-C3N4/BaTiO3 (GOCNB) nanocomposite using a facile fabrication method. The GOCNB photocatalyst exhibited significantly higher light absorption and greater charge transfer than CNB, g-C3N4, or BaTiO3. The photodegradation performance of GOCNB was optimized with a 2% mass loading of GO, and it achieved a degradation rate constant of 14.9 × 10-3 min-1 for rhodamine B with an efficiency of 94% within 180 min. The rate constant was 8-fold and 6-fold higher than that of bare BaTiO3 and CNB, respectively. The stronger photocatalytic activity was attributed to the synergistic effect of GO, g-C3N4, and BaTiO3, with g-C3N4 and BaTiO3 promoting charge transfer within a wider visible light range and GO promoting electron mobility and the photocatalyst's adsorption capacity. In particular, the proposed system maintained the spatial separation of photogenerated electron-hole pairs, which is vital for high photocatalytic activity. This study provides new insights into semiconductor-based photocatalytic systems and suggests a route for more environmentally sustainable technologies.

Tetraphenylporphyrin-based Chelating Ligand Additive as a Molecular Sieving Interfacial Barrier toward Durable Aqueous Zinc Metal Batteries

The sustained water consumption and uncontrollable dendrite growth strongly hamper the practical applications of rechargeable zinc (Zn) metal batteries (ZMBs). Herein, for the first time, we demonstrate that trace amount of chelate ligand additive can serve as a "molecular sieve-like" interfacial barrier and achieve highly efficient Zn plating/stripping. As verified by theoretical modeling and experimental investigations, the benzenesulfonic acid groups on the additive molecular not only facilitates its water solubility and selective adsorption on the Zn anode, but also effectively accelerates the de-solvation kinetics of Zn2+ . Meanwhile, the central porphyrin ring on the chelate ligand effectively expels free water molecules from Zn2+ via chemical binding against hydrogen evolution, and reversibly releases the captured Zn2+ to endow a dendrite-free Zn deposition. By virtue of this non-consumable additive, high average Zn plating/stripping efficiency of 99.7 % over 2100 cycles together with extended lifespan and suppressed water decomposition in the Zn||MnO2 full battery were achieved, thus opening a new avenue for developing highly durable ZMBs.