Carbazole-Involved Conjugated Microporous Polymer Hollow Spheres for Selective Photocatalytic Oxidation of Benzyl Alcohol under Visible-Light Irradiation

Sulfonate-Bonded Conjugated Microporous Polymer Hollowed-Out Spheres to Capture Fluoroquinolone Antibiotics and Cationic Dyes from Wastewater

Developing adsorbent materials for the efficient removal of multiple organic pollutants in water is of importance technological significance. In the present work, a kind of conjugated microporous polymer (CMP) with a hollow sphere structure was constructed by applying SiO2 nanoparticles as a template and 1,3,5-triethynylbenzene (TEB) and 2,7-dibromocarbazole (27-DBCZ) as building blocks via the Sonogashira-Hagihara cross-coupling reaction. In order to further improve the dispersibility of the as-resulting CMPs in water, hydrophilic CMPs (H-S-CMPs) were obtained by a sulfonation modification. The adsorption performance of H-S-CMPs on dyes and antibiotics was investigated, which was based on different experimental parameters such as the initial concentration, contact time, temperature, pH, and adsorbent dose. The adsorption isotherm, kinetics, and thermodynamics were also studied, and the possible adsorption mechanism of H-S-CMPs was discussed. The experimental results illustrated that the adsorption process of H-S-CMPs on dyes and antibiotics is more consistent with the Langmuir isotherm model and the pseudo-second-order kinetic model. The maximum adsorption capacities of H-S-CMPs for rhodamine B (RhB), methylene blue (MB), ciprofloxacin, and norfloxacin were 206.2, 324.7, 222.2, and 216.9 mg/g, respectively, which were determined according to the Langmuir isothern model. In addition, the adsorption mechanism of H-S-CMPs may be attributed to the synergistic effects of hydrogen bonding, electrostatic attraction, π-π stacking, and pore filling. After 5 cycles, H-S-CMPs still maintained good stability, and their removal rate of dyes could reach more than 70%. Notably, this polymeric hollow microsphere has been less extensively investigated as an adsorbent for the removal of dyes and antibiotics. As a result, based on the designable flexibility of CMPs and the unique structure of hollow microspheres, the material holds great promise for wastewater treatment in the presence of multiple pollutants.

High-Efficiency Photocatalytic Oxidation of Benzyl Alcohol by NH2-UiO-66-(Indole-2,3-Dione)-Fe

The photocatalytic oxidation of biomass-derived benzyl alcohol provides a promising way for the synthesis of benzoic acid, which is an important intermediate with wide applications. To improve the efficiency of photocatalytic benzyl alcohol oxidation to benzoic acid is of great interest. In this work, we propose the utilization of NH2-UiO-66-ID-Fe catalyst for photocatalytic oxidation of benzyl alcohol to benzoic acid, where NH2-UiO-66 is a typically used metal-organic framework, ID is indole-2,3-dione (ID) that has biocompatibility, light absorption property and can be covalently combined with amino-functionalized substances. The NH2-UiO-66-ID-Fe catalyst exhibits improved light absorption and photo-generated electron-hole separation ability compared with NH2-UiO-66. The photocatalytic performance of NH2-UiO-66-ID-Fe was examined for the oxidation of bio-based benzyl alcohol under mild conditions of air atmosphere, room temperature and no additive or additional oxidant involved. The results show that the conversion of benzyl alcohol and the selectivity to benzoic acid could both reach over 99 % in 6 h, and the generation rate of benzoic acid per gram of catalyst is 3.36 mmol g-1 h-1. The reaction mechanism was detected by radical trapping method and in situ electron paramagnetic resonance. This study presents an efficient and environmentally benign avenue for the synthesis of carboxylic acid compounds.

Confined synthesis of conjugated microporous polymers for selective photocatalytic oxidation of amines

Photocatalytic oxidative coupling of amines is considered a mild, efficient, and sustainable strategy for the synthesis of imines. As a versatile organic semiconductor, conjugated microporous polymers (CMPs) are attractive in photocatalysis areas due to the diversity of their polymeric monomers. Herein, we report that in addition to the design of monomers, size-confined polymerization is also a feasible strategy to modulate the structure and photocatalysis properties of CMPs. We adopted dibromopyrazine as polymeric units to prepare pyrazine-involved hollow spherical CMPs (H-PyB) using a template method and successfully performed size-confined polymerization of hollow samples by resizing the templates. Interestingly, the small confinement space induced the formation of CMPs with better conjugate extensibility, resulting in enhanced conductivity, narrowed bandgaps, improved photoelectric performance, etc. As a result, small-sized H-PyB CMPs had superior activity for the photocatalytic oxidation of amines. Particularly, the smallest H-PyB CMPs that we designed in the present work exhibited excellent performance for the photocatalytic coupling oxidation of amines. When using benzylamine as a model substrate, the yield of the corresponding imine reached ∼ 113 mmol·g-1·h-1, accompanied by almost 100 % selectivity. Furthermore, the as-designed confined samples exhibited stable photocatalytic activity as well as good applicability for oxidative coupling of different amines. This work not merely reports a kind of CMP photocatalysts with excellent performance for the imine coupling oxidation but also proposes an alternative strategy for constructing high-performance organic photocatalysts by size-confined synthesis.

Tailoring the catalytic sites by regulating photogenerated electron/hole pairs separation spatially for simultaneous selective oxidation of benzyl alcohol and hydrogen evolution

Photocatalytic selective oxidation of alcohols into aldehydes and H2 is a green strategy for obtaining both value-added chemicals and clean energy. Herein, a dual-purpose ZnIn2S4@CdS photocatalyst was designed and constructed for efficient catalyzing benzyl alcohol (BA) into benzaldehyde (BAD) with coupled H2 evolution. To address the deep-rooted problems of pure CdS, such as high recombination of photogenerated carriers and severe photo-corrosion, while also preserving its superiority in H2 production, ZnIn2S4 with a suitable band structure and adequate oxidizing capability was chosen to match CdS by constructing a coupled reaction. As designed, the photoexcited holes (electrons) in the CdS (ZnIn2S4) were spatially separated and transferred to the ZnIn2S4 (CdS) by electrostatic pull from the built-in electric field, leading to expected BAD production (12.1 mmol g-1 h-1) at the ZnIn2S4 site and H2 generation (12.2 mmol g-1 h-1) at the CdS site. This composite photocatalyst also exhibited high photostability due to the reasonable hole transfer from CdS to ZnIn2S4. The experimental results suggest that the photocatalytic transform of BA into BAD on ZnIn2S4@CdS is via a carbon-centered radical mechanism. This work may extend the design of advanced photocatalysts for more chemicals by replacing H2 evolution with N2 fixation or CO2 reduction in the coupled reactions.

Robust synthesis of free-standing films comprising conjugated microporous polymers nanotubes for water disinfection

Water environmental pollution especially caused by bacteria, viruses and other microorganisms always would accelerate the spread of infectious diseases and has been one of the issues highly concerned by the World Health Organization for a long time. The development of novel antibacterial materials with high activity for water cleanness was of great importance for public health and ecological sustainable development. In this work, we developed two really free-standing conjugated microprous polymers (CMPs) film with large size and processibility by a simple and convenient solid surface-assisted polymerization between bromo- and aryl-acetylene monomers. With the solid interfacial orientation from silica nanofibers, the resulting CMPs film exhibited nanotube-liked morphology with BET surface area of 379.5 m2 g-1 and 480.1 m2 g-1. The introduction of antibacterial isocyanurate and acetanilide group into polymer skeleton brings the resulting CMPs film intrinsically antimicrobial capability and durability. The growth of E. coli can be completely inhibited by the resulting CMPs film even after several cycles. Our work was suggested to provide a new route for rational design of CMPs film or membrane with antibacterial activity for water treatment and sterilization.

Red light photocatalysis of conjugated microporous polymers based on fused thiophenes for selective oxidation of amines

By virtue of tailorable building blocks, the band gaps and electronic structures of conjugated microporous polymers (CMPs) can be readily adjusted at the molecular level. Generally, the building blocks possessing extended π-conjugations result in exceptional photocatalytic performances. In this work, the direct CH arylation of fused thiophenes, thieno[3,2-b]thiophene (TT) and dithieno[3,2-b:2',3'-d]thiophene (DTT), with 1,3,6,8-tetrabromopyrene affords two CMPs, namely TT-Py-CMP and DTT-Py-CMP. The expansion of π-conjugations of the fused thiophenes from TT to DTT gives rise to a bathochromic shift about 30 nm from TT-Py-CMP to DTT-Py-CMP. Besides, systematic characterizations suggest the optoelectronic properties of DTT-Py-CMP are better than that of TT-Py-CMP. Furthermore, DTT-Py-CMP drives better red light photocatalysis than TT-Py-CMP for the selective oxidation of amines with molecular oxygen. The selective oxidation of benzyl amines by red light photocatalysis of DTT-Py-CMP progresses via an electron transfer pathway with high selectivities for imines. This work provides new insights that fused thiophenes could be the stepping stone in designing CMPs for expansive visible light photocatalysis.