Engineering and regulating the interfacial stability between Li1.3Al0.3Ti1.7(PO4)3-based solid electrolytes and lithium metal anodes for solid-state lithium batteries

Construction of SnO2 buffer layer and analysis of its interface modification for Li and Li1.5Al0.5Ge1.5(PO4)3 in solid-state batteries

SnO2 layer between Li1.5Al0.5Ge1.5(PO4)3 (LAGP) and lithium anode was prepared through simple scratch-coating process to improve interface properties. The physical phase, morphology, and electrochemical properties of Li/SnO2/LAGP structure were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical analytical methods. It was found that SnO2 layer effectively improved the interface stability of LAGP and lithium anode. The prepared Li/SnO2/LAGP/SnO2/Li symmetric cell exhibited a large critical current density of 1.8 mA cm-2 and demonstrated excellent cycling characteristics. The polarization voltages of symmetric cell were 0.1 V and 0.8 V after 1000 h of cycling at current densities of 0.04 mA cm-2 and 0.5 mA cm-2, respectively. Li/SnO2@LAGP/LiFePO4 solid-state full cells were also assembled, exhibiting a discharge specific capacity of 150 mAh g-1 after 200 cycles at 0.1C with capacity retention rate of 96 %. The good interface properties of Li/SnO2/LAGP structure are attributed to the transformation of SnO2 layer into a buffer layer containing Li2O, Sn0, and LixSny alloy during cycling process, which effectively inhibits the reduction reaction between LAGP and lithium anode.

Gradual gradient distribution composite solid electrolyte for solid-state lithium metal batteries with ameliorated electrochemical performance

Composite solid electrolytes (CSEs) have emerged as promising contenders for tackling the safety concerns associated with lithium metal batteries and attaining elevated energy densities. Nonetheless, augmenting ion conductivity and curtailing the growth of lithium dendrites within the electrolyte remain pressing challenges. We have developed CSEs featuring a unique structure, in which Li6.4La3Zr1.4Ta0.6O12 (LLZTO) is distributed in a gradient decline from the center to both sides (GCSE). This distinctive arrangement encompasses heightened polymer content at the edges, thereby enhancing the compatibility between CSEs and electrode materials. Concurrently, the escalated LLZTO content at the center functions to impede the proliferation of lithium dendrites. The uniform gradient distribution state facilitates the consistent and rapid transport of lithium ions. At room temperature, GCSE exhibits an ionic conductivity of 1.5 × 10-4 S cm-1, with stable constant current cycling of lithium for over 1200 h. Furthermore, CR2032 coin batteries with a LiFePO4 (LFP)|GCSE|Li configuration demonstrate excellent rate performance and cycling stability, yielding a discharge capacity of 120 mA h g-1 at 0.5C and retaining 90 % capacity after 200 cycles at 60 °C. Flexible solid electrolytes with gradient structures offer substantial advantages in dealing with ion conductivity and inhibition of lithium dendrites, thereby expected to propel the practical application of lithium metal batteries.