Constructing amphipathic molecular layer to assists de-solvation process for dendrite-free Zn anode

Dendrite-free zinc metal anode for long-life zinc-ion batteries enabled by an artificial hydrophobic-zincophilic coating

Considering the desired energy density, safety and cost-effectiveness, rechargeable zinc-ion batteries (ZIBs) are regarded as one of the most promising energy storage units in next-generation energy systems. Nonetheless, the service life of the current ZIBs is significantly limited by rampant dendrite growth and severe parasitic reactions occurring on the anode side. To overcome these issues caused by poor interfacial ionic conduction and water erosion, we have developed a facile strategy to fabricate a uniform zinc borate layer at the zinc anode/electrolyte interface (ZnBO). Such protective layer integrates superhydrophobic-zincopholic properties, which can effectively eliminate the direct contact of water molecules on the anode, and homogenize the interfacial ionic transfer, thereby enhancing the cyclic stability of the zinc plating/stripping. As a result, the as-prepared ZnBO-coated anode exhibits extended lifespan of 1200 h at 1 mA cm-2 and demonstrates remarkable durability of 570 h at 20 mA cm-2 in Zn||Zn symmetric cells. Additionally, when coupled to an NH4V4O10 (NVO) cathode, it also delivers a superior cyclability (203.5 mAh/g after 2000 cycles at 5 A/g, 89.3 % capacity retention) in coin full cells and a feasible capacity of 2.5 mAh at 1 A/g after 200 cycles in pouch full cells. This work offers a unique perspective on integrating hydrophobicity and zincophilicity at the anode/electrolyte interface through an artificial layer, thereby enhancing the cycle lifespan of ZIBs.

Highly reversible Zn anodes enabled by in-situ construction of zincophilic zinc polyacrylate interphase for aqueous Zn-ion batteries

The irreversibility and low utilization of Zn anode stemming from the corrosion and dendrite growth have largely limited the commercialization of aqueous zinc batteries. Here, a carbonyl-rich polymer interphase of zinc polyacrylate (ZPAA) is spontaneously in-situ constructed on Zn anode to address the above-mentioned dilemmas. The ZPAA interlayer enables fast transport kinetics of Zn2+ and tailors the interfacial electric field for realizing the uniform Zn deposition due to superior zincophilicity, high Zn2+ transference number and inherent ion-diffusion channel. Importantly, acting as a buffer interphase with strong adhesion and isolation of electrolytes, this functional layer effectively protects the Zn electrode against the water-induced erosion and passivation. Remarkably, the ZPAA@Zn electrode realizes an enhanced Coulombic efficiency of 99.71 % within 2200 cycles, delivers an ultra-long cycling stability over 7660 h (>319 days, 1 mA cm-2) and 2460 h (5 mA cm-2) with lower voltage hysteresis. Also, the ZPAA@Zn/MnO2 full cell maintains a high capacity of 114 mAh/g after 2000 cycles, much better that of untreated Zn/MnO2 cell (25 mAh/g). This concept of in-situ fabricating ion-sieve-like polymer interphase provides a facile approach to stabilize Zn anode and further paves a way for high-performance aqueous batteries.

Tuning Zn-ion de-solvation chemistry with trace amount of additive towards stable Aqueous Zn anodes

Aqueous Zn-ion batteries (AZIBs) have attracted widespread attention due to their intrinsic safety, cost-effectiveness. However, active H2O in the solvated ions [Zn(H2O)6]2+ continuously migrate to the Zn surface to trigger hydrogen evolution reaction (HER) and accelerate Zn corrosion. Herein, Zn dendrites and the related by-products have been successfully inhibited by using trace amounts of Nitrilotriacetic acid (NTA). Theoretical research indicates that two carboxyl groups of NTA molecule strongly anchored on the Zn surface and exposed another carboxyl group outside. Due to the violent interaction of carboxyl groups of NTA with H2O, the de-solvation energy barrier of solvated Zn2+ ([Zn(H2O)6]2+) on the Zn surface was obviously decreased, inhibit the active water splitting. Meanwhile, the preferential adsorption of NTA on the Zn surface increases the thickness of electric double layer EDL and provides a buffer layer to hinder the dendrite growth. Using 0.04 M NTA as additives in 2.0 M ZnSO4 electrolyte, the cycling lifespan of both Zn||Zn symmetric and Zn||MnO2 full cells is markedly prolonged. This study provides certain perspectives for trace amounts of electrolyte additives to satisfy the demand of long-cycle life AZIBs.

Construction of ultrathin solid electrolyte interface on Zn anode within 1 min for high current operating condition

Organic acid treatment can facilitate the in-situ formation of a solid electrolyte interface (SEI) on Zn foil protecting the anode from corrosion. However, the generation of hydrogen (H2) during this process is inevitable, which is often considered detrimental to getting compact SEI. Herein, a H2 film-assisted method is proposed under concentrated Amino-Trimethylene-Phosphonic-Acid to construct ultrathin and dense SEI within 1 min. Specifically, the (002) crystal planes survive from the etching process of 1 min due to the adhered H2, inducing uniform deposition and enhanced corrosion-resistance. Moreover, the H2 can effectively regulate the reaction rate, leading to ultrathin SEI and initiating a morphology preservation behavior, which has been neglected by the previous reports. The quick-formed SEI has excellent compatibility, low resistance and effective isolation of electrolyte/anode, whose advantages work together with exposed (002) planes to get accustomed to high-current surge, leading to the ZAC1@Zn//ZAC1@Zn consistently cycling over 800 h at 15 mA cm-2 and 15 mAh cm-2, the ZAC1@Zn//Cu preserves high reversibility (CE 99.7 %), and the ZAC1@Zn//MVO exhibits notable capacity retention at 191.7 mAh/g after 1000 cycles.

Boosting the reversibility of Zn anodes via synergistic cation-anion interface adsorption with addition of multifunctional potassium polyacrylate

Rechargeable aqueous Zn batteries have the edge in resource reserve, cost, energy and conversion efficiency due to the inherent features of metal Zn anodes. However, the application of Zn-based batteries is being seriously hindered by Zn dendrites and water-induced side-reactions. Here, potassium polyacrylate (K-PAM) is proposed as the electrolyte additive to form a synergistic cation-anion interface on Zn surface. The carboxyl anions and K+ cations are preferentially adsorbed on the Zn surface due to the intrinsic surfactant characteristics, which could homogenize Zn plating and suppress parasitic reactions. The synergistic regulation of K-PAM additive endows the ZnZn symmetric cells with excellent cyclic durability of 1250 h at 1 mA cm-2, which is significantly better than the polyacrylic acid additive only with carboxyl anions. Moreover, trace K-PAM addition into traditional ZnSO4 electrolyte endows the ZnCu batteries with a considerable average Coulombic efficiency of 99.2 %. Additionally, higher capacity retention and excellent cycling stability of ZnVO2 cells further mark K-PAM as a potentially impressive aqueous electrolyte additive for high-performance Zn-based batteries. This work will provide a promising method for the synergistic regulation with cations and anions of electrolyte additives to improve the stability and reversibility of Zn anodes.

Unveiling Organic Electrode Materials in Aqueous Zinc-Ion Batteries: From Structural Design to Electrochemical Performance

Aqueous zinc-ion batteries (AZIBs) are one of the most compelling alternatives of lithium-ion batteries due to their inherent safety and economics viability. In response to the growing demand for green and sustainable energy storage solutions, organic electrodes with the scalability from inexpensive starting materials and potential for biodegradation after use have become a prominent choice for AZIBs. Despite gratifying progresses of organic molecules with electrochemical performance in AZIBs, the research is still in infancy and hampered by certain issues due to the underlying complex electrochemistry. Strategies for designing organic electrode materials for AZIBs with high specific capacity and long cycling life are discussed in detail in this review. Specifically, we put emphasis on the unique electrochemistry of different redox-active structures to provide in-depth understanding of their working mechanisms. In addition, we highlight the importance of molecular size/dimension regarding their profound impact on electrochemical performances. Finally, challenges and perspectives are discussed from the developing point of view for future AZIBs. We hope to provide a valuable evaluation on organic electrode materials for AZIBs in our context and give inspiration for the rational design of high-performance AZIBs.