Coronary Magnetic Resonance Angiography: Technical Innovations Leading Us to the Promised Land?

Similarity-driven motion-resolved reconstruction for ferumoxytol-enhanced whole-heart MRI in congenital heart disease

A similarity-driven multi-dimensional binning algorithm (SIMBA) reconstruction of free-running cardiac magnetic resonance imaging data was previously proposed. While very efficient and fast, the original SIMBA focused only on the reconstruction of a single motion-consistent cluster, discarding the remaining data acquired. However, the redundant data clustered by similarity may be exploited to further improve image quality. In this work, we propose a novel compressed sensing (CS) reconstruction that performs an effective regularization over the clustering dimension, thanks to the integration of inter-cluster motion compensation (XD-MC-SIMBA). This reconstruction was applied to free-running ferumoxytol-enhanced datasets from 24 patients with congenital heart disease, and compared to the original SIMBA, the same XD-MC-SIMBA reconstruction but without motion compensation (XD-SIMBA), and a 5D motion-resolved CS reconstruction using the free-running framework (FRF). The resulting images were compared in terms of lung-liver and blood-myocardium sharpness, blood-myocardium contrast ratio, and visible length and sharpness of the coronary arteries. Moreover, an automated image quality score (IQS) was assigned using a pretrained deep neural network. The lung-liver sharpness and blood-myocardium sharpness were significantly higher in XD-MC-SIMBA and FRF. Consistent with these findings, the IQS analysis revealed that image quality for XD-MC-SIMBA was improved in 18 of 24 cases, compared to SIMBA. We successfully tested the hypothesis that multiple motion-consistent SIMBA clusters can be exploited to improve the quality of ferumoxytol-enhanced cardiac MRI when inter-cluster motion-compensation is integrated as part of a CS reconstruction.

Feasibility study of the multishot gradient-echo planar imaging sequence in non-enhanced and free-breathing whole-heart magnetic resonance coronary angiography

AIM

To investigate the feasibility of non-enhanced and free-breathing whole-heart magnetic resonance coronary angiography (MRCA) using multishot gradient-echo planar imaging (MSG-EPI).

MATERIALS AND METHODS

In total, 29 healthy volunteers were recruited for free-breathing whole-heart MRCA acquisition using the MSG-EPI sequence and fast gradient echo (GRE) sequence. After the examination, the actual scanning times, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) of the left main (LM) coronary artery, subjective quality scores for each segment, and evaluable length of the coronary artery were recorded and statistically analysed.

RESULTS

There was no significant difference between the SNRLM of the MSG-EPI sequence and fast GRE sequence (p=0.130), but the CNRLM of the MSG-EPI sequence was higher (p=0.001). The subjective quality score of the mid- and distal left anterior descending branch as well as the distal circumflex branch of the coronary artery in the MSG-EPI sequence was higher than that in the fast GRE sequence (p=0.003, 0.001, and 0.003, respectively). The evaluable length of the left anterior descending branch and the circumflex branch was better using the MSG-EPI sequence than that of the fast GRE sequence (p=0.015 and < 0.001, respectively). Moreover, the scanning time of the MSG-EPI sequence was 54.5% less than that of the fast GRE sequence (p<0.001).

CONCLUSION

The MSG-EPI sequence improves the subjective and objective image quality of MRCA as well as reduces the scanning time.

High-Dimensional Feature Selection for Automatic Classification of Coronary Stenosis Using an Evolutionary Algorithm

In this paper, a novel strategy to perform high-dimensional feature selection using an evolutionary algorithm for the automatic classification of coronary stenosis is introduced. The method involves a feature extraction stage to form a bank of 473 features considering different types such as intensity, texture and shape. The feature selection task is carried out on a high-dimensional feature bank, where the search space is denoted by O(2n) and n=473. The proposed evolutionary search strategy was compared in terms of the Jaccard coefficient and accuracy classification with different state-of-the-art methods. The highest feature selection rate, along with the best classification performance, was obtained with a subset of four features, representing a 99% discrimination rate. In the last stage, the feature subset was used as input to train a support vector machine using an independent testing set. The classification of coronary stenosis cases involves a binary classification type by considering positive and negative classes. The highest classification performance was obtained with the four-feature subset in terms of accuracy (0.86) and Jaccard coefficient (0.75) metrics. In addition, a second dataset containing 2788 instances was formed from a public image database, obtaining an accuracy of 0.89 and a Jaccard Coefficient of 0.80. Finally, based on the performance achieved with the four-feature subset, they can be suitable for use in a clinical decision support system.

Feasibility of accelerated non-contrast-enhanced whole-heart bSSFP coronary MR angiography by deep learning-constrained compressed sensing

OBJECTIVES

To examine a compressed sensing artificial intelligence (CSAI) framework to accelerate image acquisition in non-contrast-enhanced whole-heart bSSFP coronary magnetic resonance (MR) angiography.

METHODS

Thirty healthy volunteers and 20 patients with suspected coronary artery disease (CAD) scheduled for coronary computed tomography angiography (CCTA) were enrolled. Non-contrast-enhanced coronary MR angiography was performed with CSAI, compressed sensing (CS), and sensitivity encoding (SENSE) methods in healthy participants and with CSAI in patients. Acquisition time, subjective image quality score, and objective image quality measurement (blood pool homogeneity, signal-to-noise ratio [SNR], and contrast-to-noise ratio [CNR]) were compared among the three protocols. The diagnostic performance of CASI coronary MR angiography for predicting significant stenosis (≥ 50% diameter stenosis) on CCTA was evaluated. The Friedman test was performed to compare the three protocols.

RESULTS

Acquisition time was significantly shorter in the CSAI and CS groups than in the SENSE group (10.2 ± 3.2 min vs. 10.9 ± 2.9 min vs. 13.0 ± 4.1 min, p < 0.001). However, the CSAI approach had the highest image quality scores, blood pool homogeneity, mean SNR value, and mean CNR value (all p < 0.001) compared with the CS and SENSE approaches. The sensitivity, specificity, and accuracy of CSAI coronary MR angiography per patient were 87.5% (7/8), 91.7% (11/12), and 90.0% (18/20); those per vessel were 81.8% (9/11), 93.9% (46/49), and 91.7% (55/60); and those per segment were 84.6% (11/13), 98.0% (244/249), and 97.3% (255/262), respectively.

CONCLUSIONS

CSAI yielded superior image quality within a clinically feasible acquisition time in healthy participants and patients with suspected CAD.

CLINICAL RELEVANCE STATEMENT

The non-invasive and radiation-free CSAI framework could be a promising tool for rapid screening and comprehensive examination of the coronary vasculature in patients with suspected CAD.

KEY POINTS

• This prospective study showed that CSAI enables a reduction in acquisition time by 22% with superior diagnostic image quality compared with the SENSE protocol. • CSAI replaces the wavelet transform with a CNN as a sparsifying transform in the CS algorithm, achieving high coronary MR image quality with reduced noise. • CSAI achieved per-patient sensitivity of 87.5% (7/8) and specificity of 91.7% (11/12) respectively for detecting significant coronary stenosis.

Clinical quantitative coronary artery stenosis and coronary atherosclerosis imaging: a Consensus Statement from the Quantitative Cardiovascular Imaging Study Group

The detection and characterization of coronary artery stenosis and atherosclerosis using imaging tools are key for clinical decision-making in patients with known or suspected coronary artery disease. In this regard, imaging-based quantification can be improved by choosing the most appropriate imaging modality for diagnosis, treatment and procedural planning. In this Consensus Statement, we provide clinical consensus recommendations on the optimal use of different imaging techniques in various patient populations and describe the advances in imaging technology. Clinical consensus recommendations on the appropriateness of each imaging technique for direct coronary artery visualization were derived through a three-step, real-time Delphi process that took place before, during and after the Second International Quantitative Cardiovascular Imaging Meeting in September 2022. According to the Delphi survey answers, CT is the method of choice to rule out obstructive stenosis in patients with an intermediate pre-test probability of coronary artery disease and enables quantitative assessment of coronary plaque with respect to dimensions, composition, location and related risk of future cardiovascular events, whereas MRI facilitates the visualization of coronary plaque and can be used in experienced centres as a radiation-free, second-line option for non-invasive coronary angiography. PET has the greatest potential for quantifying inflammation in coronary plaque but SPECT currently has a limited role in clinical coronary artery stenosis and atherosclerosis imaging. Invasive coronary angiography is the reference standard for stenosis assessment but cannot characterize coronary plaques. Finally, intravascular ultrasonography and optical coherence tomography are the most important invasive imaging modalities for the identification of plaques at high risk of rupture. The recommendations made in this Consensus Statement will help clinicians to choose the most appropriate imaging modality on the basis of the specific clinical scenario, individual patient characteristics and the availability of each imaging modality.

[Echocardiography with high frame rates in the clinical practice : Principles, applications and perspectives]

Continuous developments in cardiovascular imaging, software and hardware have led to technological advancements that open new ways for assessing myocardial mechanics, hemodynamics, and function. Through new scan modalities, echocardiographic scanners can nowadays achieve very high frame rates up to 5000 frames s-1 which enables a wide variety of new applications, including shear wave elastography, ultrafast speckle tracking, the visualization of intracardiac blood flow and myocardial perfusion imaging. This review provides an overview of these advances and demonstrates possible applications and their potential added value in the clinical practice.

Fully automated pixel-wise quantitative CMR-myocardial perfusion with CMR-coronary angiography to detect hemodynamically significant coronary artery disease

OBJECTIVES

We applied a fully automated pixel-wise post-processing framework to evaluate fully quantitative cardiovascular magnetic resonance myocardial perfusion imaging (CMR-MPI). In addition, we aimed to evaluate the additive value of coronary magnetic resonance angiography (CMRA) to the diagnostic performance of fully automated pixel-wise quantitative CMR-MPI for detecting hemodynamically significant coronary artery disease (CAD).

METHODS

A total of 109 patients with suspected CAD were prospectively enrolled and underwent stress and rest CMR-MPI, CMRA, invasive coronary angiography (ICA), and fractional flow reserve (FFR). CMRA was acquired between stress and rest CMR-MPI acquisition, without any additional contrast agent. Finally, CMR-MPI quantification was analyzed by a fully automated pixel-wise post-processing framework.

RESULTS

Of the 109 patients, 42 patients had hemodynamically significant CAD (FFR ≤ 0.80 or luminal stenosis ≥ 90% on ICA) and 67 patients had hemodynamically non-significant CAD (FFR ˃ 0.80 or luminal stenosis < 30% on ICA) were enrolled. On the per-territory analysis, patients with hemodynamically significant CAD had higher myocardial blood flow (MBF) at rest, lower MBF under stress, and lower myocardial perfusion reserve (MPR) than patients with hemodynamically non-significant CAD (p < 0.001). The area under the receiver operating characteristic curve of MPR (0.93) was significantly larger than those of stress and rest MBF, visual assessment of CMR-MPI, and CMRA (p < 0.05), but similar to that of the integration of CMR-MPI with CMRA (0.90).

CONCLUSIONS

Fully automated pixel-wise quantitative CMR-MPI can accurately detect hemodynamically significant CAD, but the integration of CMRA obtained between stress and rest CMR-MPI acquisition did not provide significantly additive value.

KEY POINTS

• Full quantification of stress and rest cardiovascular magnetic resonance myocardial perfusion imaging can be postprocessed fully automatically, generating pixel-wise myocardial blood flow (MBF) and myocardial perfusion reserve (MPR) maps. • Fully quantitative MPR provided higher diagnostic performance for detecting hemodynamically significant coronary artery disease, compared with stress and rest MBF, qualitative assessment, and coronary magnetic resonance angiography (CMRA). • The integration of CMRA and MPR did not significantly improve the diagnostic performance of MPR alone.

Addition of gadolinium contrast to three-dimensional SSFP MR sequences improves the visibility of coronary artery anatomy in young children

Objective

This study aims to compare the value of a gadolinium contrast-enhanced 1.5-T three-dimensional (3D) steady-state free precession (SSFP) sequence with that of a noncontrast 3D SSFP sequence for magnetic resonance coronary angiography in a pediatric population.

Materials and methods

Seventy-nine patients from 1 month to 18 years old participated in this study. A 3D SSFP coronary MRA at 1.5-T was applied before and after gadolinium-diethylenetriaminepentaaceticacid (DTPA) injection. The detection rates of coronary arteries and side branches were assessed by McNemar's χ² test. The image quality, vessel length, signal-to-noise ratio (SNR), and contrast-to-noise ratio (CNR) of the coronary arteries were analyzed by the Wilcoxon signed-rank test. The intra- and interobserver agreements were evaluated with a weighted kappa test or an intraclass correlation efficient test.

Results

A contrast-enhanced scan detected more coronary arteries than a noncontrast-enhanced scan in patients under 2 years old (P < 0.05). The SSFP sequence with contrast media detected more coronary artery side branches in patients younger than 5 years (P < 0.05). The image quality of all the coronary arteries was better after the injection of gadolinium-DTPA in children younger than 2 years (P < 0.05) but not significantly improved in children older than 2 years (P > 0.05). The contrast-enhanced 3D SSFP protocol detected longer lengths for the left anterior descending coronary artery in children younger than 2 years and the left circumflex coronary artery (LCX) in children younger than 5 years (P < 0.05). SNR and CNR of all the coronary arteries in children younger than 5 years and the LCX and right coronary artery in children older than 5 years enhanced after the injection of gadolinium-DTPA (P < 0.05). The intra- and interobserver agreements were high (0.803-0.998) for image quality, length, SNR, and CNR of the coronary arteries in both pre- and postcontrast groups.

Conclusion

The use of gadolinium contrast in combination with the 3D SSFP sequence is necessary for coronary imaging in children under 2 years of age and may be helpful in children between 2 and 5 years. Coronary artery visualization is not significantly improved in children older than 5 years.

The Cost Effectiveness of Coronary CT Angiography and the Effective Utilization of CT-Fractional Flow Reserve in the Diagnosis of Coronary Artery Disease

Given the high global disease burden of coronary artery disease (CAD), a major problem facing healthcare economic policy is identifying the most cost-effective diagnostic strategy for patients with suspected CAD. The aim of this review is to assess the long-term cost-effectiveness of coronary computed tomography angiography (CCTA) when compared with other diagnostic modalities and to define the cost and effective diagnostic utilization of computed tomography-fractional flow reserve (CT-FFR). A search was conducted through the MEDLINE database using PubMed with 16 of 119 manuscripts fitting the inclusion and exclusion criteria for review. An analysis of the data included in this review suggests that CCTA is a cost-effective strategy for both low risk acute chest pain patients presenting to the emergency department (ED) and low-to-intermediate risk stable chest pain outpatients. For patients with intermediate-to-high risk, CT-FFR is superior to CCTA in identifying clinically significant stenosis. In low-to-intermediate risk patients, CCTA provides a cost-effective diagnostic strategy with the potential to reduce economic burden and improve long-term health outcomes. CT-FFR should be utilized in intermediate-to-high risk patients with stenosis of uncertain clinical significance. Long-term analysis of cost-effectiveness and diagnostic utility is needed to determine the optimal balance between the cost-effectiveness and diagnostic utility of CT-FFR.

The mechanisms of arterial signal intensity profile in non-contrast coronary MRA (NC-MRCA): a 3D printed phantom investigation and clinical translations

Signal intensity (SI) drop has been proposed as an indirect stenosis assessment in non-contrast coronary MRA (NC-MRCA) but it uses unproven assumptions. We aimed to clarify the mechanisms that govern the SI in vitro and develop a stenosis detection method in vivo. Flow phantom tubes with/without stenosis were scanned under two spatial resolutions (0.5/1.0 mm³) on a 3.0 T MRI. Thirty-two coronary arteries from 11 volunteers were prospectively scanned with an EKG- and respiratory-gated 3D NC-MRCA with a resolution of 1.0 mm³, with coronary computed tomography angiography (CTA) as reference. The normalized SI along the centerline of the tubes or the coronary arteries was assessed against the distance from the orifice using a linear regression model. Its coefficient (SI decay slope) and goodness-of-fit (R2) were extracted to assess the effect of flow velocity and stenosis on the SI profile curve. The R2 was utilized for the stenosis detection. Phantom study: A slow flow velocity caused a steep SI decay slope. The SI drop revealed only at the inlet and outlet of stenosis due to the flow turbulence/vortex and yielded low R2, in which shape changed by the resolution. Clinical study: The R2 cutoff to detect ≥ 50% stenosis for the left and right coronary arteries were 0.64 and 0.20 with a sensitivity/specificity of 71.5/71.5 and 66.7/100 (%), respectively. The SI drop did not reflect the actual stenosis position and not suitable for the stenosis localization. The R2 cutoff represents an alternative method to detect stenoses on NC-MRCA at vessel level.Trial registration: ClinicalTrials.gov; NCT03768999, registered on December 7, 2018.

Ferumoxytol-Enhanced Cardiac Magnetic Resonance Angiography and 4D Flow: Safety and Utility in Pediatric and Adult Congenital Heart Disease

Cardiac magnetic resonance imaging and angiography have a crucial role in the diagnostic evaluation and follow up of pediatric and adult patients with congenital heart disease. Although much of the information required of advanced imaging studies can be provided by standard gadolinium-enhanced magnetic resonance imaging, the limitations of precise bolus timing, long scan duration, complex imaging protocols, and the need to image small structures limit more widespread use of this modality. Recent experience with off-label diagnostic use of ferumoxytol has helped to mitigate some of these barriers. Approved by the U.S. FDA for intravenous treatment of anemia, ferumoxytol is an ultrasmall superparamagnetic iron oxide nanoparticle that has a long blood pool residence time and high relaxivity. Once metabolized by macrophages, the iron core is incorporated into the reticuloendothelial system. In this work, we aim to summarize the evolution of ferumoxytol-enhanced cardiovascular magnetic resonance imaging and angiography and highlight its many applications for congenital heart disease.

Synergistic prognostic value of coronary distensibility index and fractional flow reserve based cCTA for major adverse cardiac events in patients with Coronary artery disease

BACKGROUND

Coronary distensibility index (CDI), as an early predictor of cardiovascular diseases, has the potential to complement coronary computed tomography angiography (cCTA)-derived fractional flow reserve (CT-FFR) for predicting major adverse cardiac events (MACEs). Thus, the prognostic value of CT-FFR combined with CDI for MACEs is worth exploring.

METHODS

Patients with a moderate or severe single left anterior descending coronary artery stenosis were included and underwent FFR and CDI analysis based on cCTA, followed up at least 1 year, and recorded MACEs. Multivariate logistic regression analysis was performed to determine independent predictors of MACEs. The area under of receiver operating characteristic (ROC) curve was used to evaluated evaluate the diagnostic performance of CT-FFR, CDI, and a combination of the two.

RESULTS

All the vessel-specific data were from LAD. 150 patients were analysed. 55 (37%) patients experienced MACEs during follow-up. Patients with CT-FFR ≤ 0.8 had higher percentage of MACEs compared with CT-FFR > 0.8 (56.3% vs.7.3%, p < 0.05). Patients' CDI was significantly decreased in MACEs group compared with non-MACEs group (p < 0.05). Multivariate analysis revealed that diabetes (p = 0.025), triglyceride (p = 0.015), CT-FFR ≤ 0.80 (p = 0.038), and CDI (p < 0.001) are independent predictors of MACEs. According to ROC curve analysis, CT-FFR combined CDI showed incremental diagnostic performance over CT-FFR alone for prediction of MACEs (AUC = 0.831 vs. 0.656, p = 0.0002).

CONCLUSION

Our study provides initial evidence that combining CDI with CT-FFR shows incremental discriminatory power for MACEs over CT-FFR alone, independent of clinical risk factors. Diabetes and triglyceride are also associated with MACEs.

High-resolution non-contrast free-breathing coronary cardiovascular magnetic resonance angiography for detection of coronary artery disease: validation against invasive coronary angiography

BACKGROUND

Coronary artery disease (CAD) is the single most common cause of death worldwide. Recent technological developments with coronary cardiovascular magnetic resonance angiography (CCMRA) allow high-resolution free-breathing imaging of the coronary arteries at submillimeter resolution without contrast in a predictable scan time of ~ 10 min. The objective of this study was to determine the diagnostic accuracy of high-resolution CCMRA for CAD detection against the gold standard of invasive coronary angiography (ICA).

METHODS

Forty-five patients (15 female, 62 ± 10 years) with suspected CAD underwent sub-millimeter-resolution (0.6 mm3) non-contrast CCMRA at 1.5T in this prospective clinical study from 2019-2020. Prior to CCMR, patients were given an intravenous beta blockers to optimize heart rate control and sublingual glyceryl trinitrate to promote coronary vasodilation. Obstructive CAD was defined by lesions with ≥ 50% stenosis by quantitative coronary angiography on ICA.

RESULTS

The mean duration of image acquisition was 10.4 ± 2.1 min. On a per patient analysis, the sensitivity, specificity, positive predictive value and negative predictive value (95% confidence intervals) were 95% (75-100), 54% (36-71), 60% (42-75) and 93% (70-100), respectively. On a per vessel analysis the sensitivity, specificity, positive predictive value and negative predictive value (95% confidence intervals) were 80% (63-91), 83% (77-88), 49% (36-63) and 95% (90-98), respectively.

CONCLUSION

As an important step towards clinical translation, we demonstrated a good diagnostic accuracy for CAD detection using high-resolution CCMRA, with high sensitivity and negative predictive value. The positive predictive value is moderate, and combination with CMR stress perfusion may improve the diagnostic accuracy. Future multicenter evaluation is now required.

Whole-heart non-rigid motion corrected coronary MRA with autofocus virtual 3D iNAV

PURPOSE

Respiratory motion-corrected coronary MR angiography (CMRA) has shown promise for assessing coronary disease. By incorporating coronal 2D image navigators (iNAVs), respiratory motion can be corrected for in a beat-to-beat basis using translational correction in the foot-head (FH) and right-left (RL) directions and in a bin-to-bin basis using non-rigid motion correction addressing the remaining FH, RL and anterior-posterior (AP) motion. However, with this approach beat-to-beat AP motion is not corrected for. In this work we investigate the effect of remaining beat-to-beat AP motion and propose a virtual 3D iNAV that exploits autofocus motion correction to enable beat-to-beat AP and improved RL intra-bin motion correction.

METHODS

Free-breathing 3D whole-heart CMRA was acquired using a 3-fold undersampled variable-density Cartesian trajectory. Beat-to-beat 3D translational respiratory motion was estimated from the 2D iNAVs in FH and RL directions, and in AP direction with autofocus assuming a linear relationship between FH and AP movement of the heart. Furthermore, motion in RL was also refined using autofocus. This virtual 3D (v3D) iNAV was incorporated in a non-rigid motion correction (NRMC) framework. The proposed approach was tested in 12 cardiac patients, and visible vessel length and vessel sharpness for the right (RCA) and left (LAD) coronary arteries were compared against 2D iNAV-based NRMC.

RESULTS

Average vessel sharpness and length in v3D iNAV NRMC was improved compared to 2D iNAV NRMC (vessel sharpness: RCA: 56 ± 1% vs 52 ± 11%, LAD: 49 ± 8% vs 49 ± 7%; visible vessel length: RCA: 5.98 ± 1.37 cm vs 5.81 ± 1.62 cm, LAD: 5.95 ± 1.85 cm vs 4.83 ± 1.56 cm), however these improvements were not statistically significant.

CONCLUSION

The proposed virtual 3D iNAV NRMC reconstruction further improved NRMC CMRA image quality by reducing artefacts arising from residual AP motion, however the level of improvement was subject-dependent.

Radiogenomics and Artificial Intelligence Approaches Applied to Cardiac Computed Tomography Angiography and Cardiac Magnetic Resonance for Precision Medicine in Coronary Heart Disease: A Systematic Review

The risk of coronary heart disease (CHD) clinical manifestations and patient management is estimated according to risk scores accounting multifactorial risk factors, thus failing to cover the individual cardiovascular risk. Technological improvements in the field of medical imaging, in particular, in cardiac computed tomography angiography and cardiac magnetic resonance protocols, laid the development of radiogenomics. Radiogenomics aims to integrate a huge number of imaging features and molecular profiles to identify optimal radiomic/biomarker signatures. In addition, supervised and unsupervised artificial intelligence algorithms have the potential to combine different layers of data (imaging parameters and features, clinical variables and biomarkers) and elaborate complex and specific CHD risk models allowing more accurate diagnosis and reliable prognosis prediction. Literature from the past 5 years was systematically collected from PubMed and Scopus databases, and 60 studies were selected. We speculated the applicability of radiogenomics and artificial intelligence through the application of machine learning algorithms to identify CHD and characterize atherosclerotic lesions and myocardial abnormalities. Radiomic features extracted by cardiac computed tomography angiography and cardiac magnetic resonance showed good diagnostic accuracy for the identification of coronary plaques and myocardium structure; on the other hand, few studies exploited radiogenomics integration, thus suggesting further research efforts in this field. Cardiac computed tomography angiography resulted the most used noninvasive imaging modality for artificial intelligence applications. Several studies provided high performance for CHD diagnosis, classification, and prognostic assessment even though several efforts are still needed to validate and standardize algorithms for CHD patient routine according to good medical practice.

FLOWER-MI and the root of the problem with non-culprit revascularisation

How do we reduce cardiac death and myocardial infarction by percutaneous coronary intervention (PCI) in coronary heart disease? Although the interventional community continues to grapple with this question in stable angina, the benefits of PCI for non-culprit lesions found at ST-elevation myocardial infarction are established. Is it then wishful thinking that an index developed in stable coronary disease, for identifying lesions capable of causing ischaemia will show an incremental benefit over angiographically guided non-culprit PCI? This is the question posed by the recently published FLOW Evaluation to Guide Revascularization in Multi-vessel ST-elevation Myocardial Infarction (FLOWER-MI) trial. We examine the trial design and results; ask if there is any relationship between the baseline physiological significance of a non-culprit lesion and vulnerability to future myocardial infarction; and consider if more sophisticated methods can help guide or defer non-culprit revascularisation.

Clinical Application of Non-Contrast-Enhanced Dixon Water-Fat Separation Compressed SENSE Whole-Heart Coronary MR Angiography at 3.0 T With and Without Nitroglycerin

BACKGROUND

3.0 T non-contrast-enhanced nitroglycerin (NTG)-assisted whole-heart coronary magnetic resonance angiography (MRA) employing Dixon water-fat separation and compressed SENSE (CS-SENSE) acceleration is a promising method for diagnosing coronary artery disease (CAD).

PURPOSE

To evaluate the diagnostic performance of this technique for detecting clinically-relevant (≥50% diameter reducing) CAD and to evaluate the difference in NTG-induced coronary vasodilation between patients with and without clinically-relevant CAD.

STUDY TYPE

Prospective.

POPULATION

Sixty-six patients with suspected CAD.

FIELD STRENGTH/SEQUENCE

3.0 T; CSSENSE, Dixon water-fat separation, three-dimensional segmented turbo field gradient-echo sequence for whole-heart coronary MRA.

ASSESSMENT

Overall image quality of coronary MRA was calculated on the basis of all visible coronary segments. The diagnostic performance of coronary MRA for detecting a ≥50% reduction in coronary artery diameter with and without NTG was compared using X-ray coronary angiography (CAG) as the reference. According to CAG, patients were divided into a non-clinically-relevant CAD group and clinically-relevant CAD group, and the difference in NTG-induced vasodilation between the groups was evaluated.

STATISTICAL TESTS

Unpaired/paired Student's t-test, Mann-Whitney U test, paired Wilcoxon signed-rank test, χ² test, McNemar test. A two-tailed P value <0.05 was considered significant.

RESULTS

Overall image quality was increased significantly in the coronary MRA images after NTG. The diagnostic performance of the non-NTG vs. NTG-assisted coronary MRA was as follows on a per-patient basis: sensitivity 94.3% vs. 94.3%, specificity 64.5% vs. 83.9%, positive predictive value 75.0% vs. 86.8%, negative predictive value 90.9% vs. 92.9%, and accuracy 80.3% vs. 89.4%, respectively. NTG-induced vasodilation was significantly lower in the clinically-relevant CAD group than in the non-clinically-relevant CAD group (13.7 ± 8.1% vs. 24.1 ± 16.3%).

DATA CONCLUSION

Non-contrast Dixon water-fat separation CS-SENSE coronary MRA at 3.0 T can noninvasively detect clinically-relevant CAD and sublingual NTG improved performance. Combining pre- and post-NTG coronary MRA may provide a simple noninvasive and nonionizing test to evaluate coronary vasodilation function.

LEVEL OF EVIDENCE

1 TECHNICAL EFFICACY STAGE: 2.

Clinical comparison of sub-mm high-resolution non-contrast coronary CMR angiography against coronary CT angiography in patients with low-intermediate risk of coronary artery disease: a single center trial

BACKGROUND

The widespread clinical application of coronary cardiovascular magnetic resonance (CMR) angiography (CMRA) for the assessment of coronary artery disease (CAD) remains limited due to low scan efficiency leading to prolonged and unpredictable acquisition times; low spatial-resolution; and residual respiratory motion artefacts resulting in limited image quality. To overcome these limitations, we have integrated highly undersampled acquisitions with image-based navigators and non-rigid motion correction to enable high resolution (sub-1 mm3) free-breathing, contrast-free 3D whole-heart coronary CMRA with 100% respiratory scan efficiency in a clinically feasible and predictable acquisition time.

OBJECTIVES

To evaluate the diagnostic performance of this coronary CMRA framework against coronary computed tomography angiography (CTA) in patients with suspected CAD.

METHODS

Consecutive patients (n = 50) with suspected CAD were examined on a 1.5T CMR scanner. We compared the diagnostic accuracy of coronary CMRA against coronary CTA for detecting a ≥ 50% reduction in luminal diameter.

RESULTS

The 50 recruited patients (55 ± 9 years, 33 male) completed coronary CMRA in 10.7 ± 1.4 min. Twelve (24%) had significant CAD on coronary CTA. Coronary CMRA obtained diagnostic image quality in 95% of all, 97% of proximal, 97% of middle and 90% of distal coronary segments. The sensitivity, specificity, positive predictive value, negative predictive value and diagnostic accuracy were: per patient (100%, 74%, 55%, 100% and 80%), per vessel (81%, 88%, 46%, 97% and 88%) and per segment (76%, 95%, 44%, 99% and 94%) respectively.

CONCLUSIONS

The high diagnostic image quality and diagnostic performance of coronary CMRA compared against coronary CTA demonstrates the potential of coronary CMRA as a robust and safe non-invasive alternative for excluding significant disease in patients at low-intermediate risk of CAD.