Bone volume change following vascularized free bone flap reconstruction of the mandible

Impact of segment length on bony changes following microvascular jaw reconstruction using virtually planned fibula flaps - A retrospective study

Postoperative bone resorption within the first year after a free fibular flap is a common problem and poses major challenges for subsequent therapies. Due to the concerns of increased bone resorption, short segments in particular, i.e. ≤ 20 mm long, are considered unfavorable despite insufficient data in the literature. Therefore, the aim of this retrospective study was to analyze the changes in bone volume (BV), cortical thickness (cTh) and cortical density of especially short fibula segments one year after microvascular jaw reconstruction. Eighty-six fibula segments were included in this study, of which 30 segments were ≤25 mm and 16 segments were ≤20 mm long. The longer fibula segments served as a comparison for bone remodeling. After 15.10 ± 5.60 months, the changes in total bone volume (BV), cTh and cortical density of the fibula segments were determined from analyses of three-dimensional radiological images, and the percentage bone loss rates were assessed in relation to different segment lengths. All fibula segments showed loss of bone volume (BV) regardless of segment length, with no difference in the relative changes in BV as a function of segment length. While the volume changes were smaller in the shorter segments, the longer segments (average length: 26.50 mm) showed a higher bone loss of up to 25%. Although the total BV of the small segments (≤20 mm) did not change at follow-up, the loss of cortical density was substantial. Based on our findings that the largest bony changes were associated with segments of 25 mm in length, the current clinical practice that fibula segments should not be smaller than 20 mm should be critically reconsidered.

Complications in Deep Circumflex Iliac Artery-Related Vascularized Free Iliac Flap

BACKGROUND

Since its first application in 1978, the vascularized free iliac flap (VFIF) has gradually become a mainstay for tissue defect reconstruction. However, the complications associated with harvesting the bone flap and its corresponding reconstruction surgery cannot be overlooked.

METHODS

We conducted a narrative review through literature search to identify the types, incidence, influencing factors, measurement methods, and treatment approaches of complications related to DCIA-related VFIF.

RESULTS

We propose the "LIP" rule (Loss, Injury, Postoperative) for classifying donor site complications. For the four most common recipient sites, mandible, maxilla, extremities, and hip joint, we list the common and rare complications that may occur. Additionally, we provide a summary of the methods and advances in preventing these complications.

CONCLUSIONS

We comprehensively describe the complications observed in the application of DCIA-related VFIF and introduce the "LIP" principle and other strategies to minimize or avoid adverse outcomes.

Long-term posttransplant-related bone volumetric changes in eight face transplant recipients - A single-center retrospective case series

BACKGROUND

The long-term stability of allograft or native bone in facial vascularized composite allograft (fVCA) recipients is unclear. This study quantified long-term bone volume changes in facial transplants.

METHODS

Computed tomography scans of eight fVCA recipients (2011-2023) were analyzed with Materialise Mimics. Native bone (soft tissue-only VCAs, n=4) and allotransplanted bone (n=4) were compared. Median bone volumes were assessed for significance using the WilcoxonRanked-Sum Test.

RESULTS

Mean follow-up was 10 years (range 5-13). A significant median decrease in both mandibular (-6520 mm3; p=0.0078) and maxillary (-3548 mm3; p=0.0078) bone volumes was seen in all patients, irrespective of bone origin. Median bone volume loss was -9.92% in the bony allograft cohort and -22.60% in the soft tissue-only cohort, respectively. The histopathological analysis of the limited samples (n=2) showed physiological bone even after ten years.

CONCLUSION

Patients with allotransplanted bone showed less pronounced volume loss compared to those with native bone receiving soft tissue-only allografts. This finding suggests that allotransplanted vascularized bone in fVCAs may not be a primary target of chronic rejection processes that compromise bone volume stability and functionality. Bone volume changes are likely influenced by multiple factors, such as tooth loss, nutrition, chronic immunosuppression (e.g., steroids), mechanical stress/load, varying bone remodeling rates, and other medical comorbidities. Further research is needed to clarify the factors affecting bone volume and remodeling after fVCA.

Comparative analysis of volumetric changes between resection volume of oral tongue cancer and post operative volume of radial forearm flaps

OBJECTIVES

This study investigates the relationship between the total volume of oral tongue cancer pre-operatively and the RFFF volume post-operatively.

MATERIALS AND METHODS

A total of 52 DICOM imaging datasets (CT or MRI) of 26 patients were included in this study. The volume of the desired structure was quantified using semi-automatic segmentation using the software ITK-SNAP. All extracted measurements were validated by two further clinicians at separate instances.

RESULTS

The variation of MeanVolTu can be predicted by MeanVolFlap moderately reliable with 59.1% confidence (R-Qua: 0.591). ANOVA Testing to represent how well the regression line fits the data, resulted in the overall regression model being statistically significant in predicting the MeanVolTu (p < 0.001). The flap volume may be predicted using the following algorithm: MeanVolFlap0 = 3241,633 + 1, 322 * MeanVolTu.

CONCLUSION

The results of this study show positive correlation between tumor volume and flap volume, highlighting the significance of efficient flap planning with increasing tumor volume. A larger extraction volume of the radial forearm free flap from the donor site compromises the forearm more, thus increasing the probability of post-operative complications.

CLINICAL RELEVANCE

Radial forearm free flap design in accordance with its corresponding 3D tumor volume.

Prediction of jaw opening function after mandibular reconstruction using subject-specific musculoskeletal modelling

BACKGROUND

Mandibular reconstruction patients often suffer abnormalities in the mandibular kinematics. In silico simulations, such as musculoskeletal modelling, can be used to predict post-operative mandibular kinematics. It is important to validate the mandibular musculoskeletal model and analyse the factors influencing its accuracy.

OBJECTIVES

To investigate the jaw opening-closing movements after mandibular reconstruction, as predicted by the subject-specific musculoskeletal model, and the factors influencing its accuracy.

METHODS

Ten mandibular reconstruction patients were enrolled in this study. Cone-beam computed tomography images, mandibular movements, and surface electromyogram signals were recorded preoperatively. A subject-specific mandibular musculoskeletal model was established to predict surgical outcomes using patient-averaged muscle parameter changes as model inputs. Jaw bone geometry was replaced by surgical planning results, and the muscle insertion sites were registered based on the non-rigid iterative closest point method. The predicted jaw kinematic data were validated based on 6-month post-operative measurements. Correlations between the prediction accuracy and patient characteristics (age, pathology and surgical scope) were further analysed.

RESULTS

The root mean square error (RMSE) for lower incisor displacement was 31.4%, and the error for peak magnitude of jaw opening was 4.9 mm. Age, post-operative infection and radiotherapy influenced the prediction accuracy. The amount of masseter detachment showed little correlation with jaw opening.

CONCLUSION

The mandibular musculoskeletal model successfully predicted short-range jaw opening functions after mandibular reconstruction. It provides a novel surgical planning method to predict the risk of developing trismus.

Oral rehabilitation and associated quality of life following mandibular reconstruction with free fibula flap: a cross-sectional study

Introduction

Mandibular reconstruction with the free fibula flap (FFF) has become a standardized procedure. The situation is different with oral rehabilitation, so the purpose of this study was to investigate the frequency of implant placement and prosthetic restoration. Additionally, the patients' situation, motivation, and treatment course were structurally assessed.

Materials and methods

All cases between January 2013 and December 2018 that underwent mandibular reconstruction in our department with a free fibula flap and gave written informed consent to participate were interviewed with two structured questionnaires about their restoration and quality of life. Additionally, medical records, general information, status of implants and therapy, and metric analyses of the inserted implants were performed.

Results

In total 59 patients were enrolled and analyzed in this monocentric study. Overall, oral rehabilitation was achieved in 23.7% at the time of investigation. In detail, implants were inserted in 37.3% of patients and showed an 83.3% survival of dental implants. Of these implanted patients, dental implants were successfully restored with a prosthetic restoration in 63.6. Within this subgroup, satisfaction with the postoperative aesthetic and functional result was 79.9% and with the oral rehabilitation process was 68.2%. Satisfaction with the implant-borne prosthesis was 87.5%, with non-oral-squamous-cell-carcinoma patients being statistically significantly more content with the handling (p=0.046) and care (p=0.031) of the prosthesis.

Discussion

Despite the well-reconstructed bony structures, there is a need to increase the effort of achieving oral rehabilitation, especially looking at the patient's persistent motivation for the procedure.

Mandibular reconstructions with free fibula flap using standardized partially adjustable cutting guides or CAD/CAM technique: a three- and two-dimensional comparison

Background

Mandibular reconstruction with the fibula free flap (FFF) is performed freehand, CAD/CAM-assisted, or by using partially adjustable resection/reconstruction aids. The two latter options represent the contemporary reconstructive solutions of the recent decade. The purpose of this study was to compare both auxiliary techniques with regard to feasibility, accuracy, and operative parameters.

Methods and materials

The first twenty consecutively operated patients requiring a mandibular reconstruction (within angle-to-angle) with the FFF using the partially adjustable resection aids between January 2017 and December 2019 at our department were included. Additionally, matching CAD/CAM FFF cases were used as control group in this cross-sectional study. Medical records and general information (sex, age, indication for surgery, extent of resection, number of segments, duration of surgery, and ischemia time) were analyzed. In addition, the pre- and postoperative Digital Imaging and Communications in Medicine data of the mandibles were converted to standard tessellation language (.stl) files. Conventional measurements - six horizontal distances (A-F) and temporo-mandibular joint (TMJ) spaces - and the root mean square error (RMSE) for three-dimensional analysis were measured and calculated.

Results

In total, 40 patients were enrolled (20:20). Overall operation time, ischemia time, and the interval between ischemia time start until end of operation showed no significant differences. No significant difference between the two groups were revealed in conventional measurements of distances (A-D) and TMJ spaces. The Δ differences for the distance F (between the mandibular foramina) and the right medial joint space were significantly lower in the ReconGuide group. The RMSE analysis of the two groups showed no significant difference (p=0.925), with an overall median RMSE of 3.1 mm (2.2-3.7) in the CAD/CAM and 2.9 mm (2.2-3.8) in the ReconGuide groups.

Conclusions

The reconstructive surgeon can achieve comparable postoperative results regardless of technique, which may favor the ReconGuide use in mandibular angle-to-angle reconstruction over the CAD/CAM technique because of less preoperative planning time and lower costs per case.

Outcome Assessment after Reconstruction of Tumor-Related Mandibular Defects Using Free Vascularized Fibular Flap-A Clinical Study

The objective of this study was to analyze the outcomes of the free vascularized fibular flap in the reconstruction of mandibular defects, and to assess the oral health impact profile of these patients before surgery and after oral rehabilitation. Patients requiring reconstruction of defects greater than 6 cm were selected for this study. The defect size and type, the size of the required skin paddle, the need for second flaps, the intraoperative complications, and the type of closure were documented. Patients were evaluated postoperatively for function, aesthetics, and donor- or reconstruction-site complications. The validated oral health impact profile (OHIP-14) questionnaires were filled before and after surgery and after dental rehabilitation. This study included 11 cases of squamous-cell carcinomas, 2 cases of malignant nerve sheath tumors, and 1 case each of malignant melanoma, ameloblastoma, giant-cell tumor, osteosarcoma, and chondrosarcoma. The analysis revealed a significant association (p = 0.030) of gender with free vascular flap complications, while no significant association (p > 0.05) was found when donor- and recipient- site complications, as well as the type of resection (Brown’s classification), were compared with free vascular flaps. Moreover, the total OHIP-14 scores for patients before surgery, after surgery, and after dental rehabilitation were 12.03 ± 1.34, 10.66 ± 1.41, and 08.33 ± 0.62, respectively. The oral health-related quality of life was markedly improved after the reconstruction of the mandibular defects with free vascularized fibular flap and dental rehabilitation. The overall success rate of fibular flap in our study was 72.2%, which is lower than that reported in the literature. This may be attributed to the fact that almost all of our cases included large segmental defects that extended across the midline of the mandible.

Patient-centred outcomes and dental implant placement in computer-aided free flap mandibular reconstruction: a systematic review and meta-analysis

Computerised surgical planning (CSP) and computer-aided design and manufacturing (CAD/CAM) have been demonstrated to increase surgical accuracy and reduce operative time in free flap mandibular reconstruction, but evidence is lacking as to their impact on patient-centred outcomes. Implant-supported dental prostheses, however, have been associated with improved quality of life outcomes following free flap mandibular reconstruction. We aim to review reported patient-centred outcomes in mandibular reconstruction with CSP and CAD/CAM and determine whether use of these technologies is associated with higher rates of dental implant placement following free flap mandibular reconstruction. On December 20, 2020, a systematic review and meta-analysis were conducted according to PRISMA guidelines for studies reporting quality of life, functional outcomes, and rates of dental implant placement in computer-aided free flap mandibular reconstruction. A random-effects meta-analysis was performed to compare dental implant placement rates between surgeries using CSP and those using conventional freehand techniques. A total of 767 articles were screened. Nine articles reporting patient-centred outcomes and 16 articles reporting dental implant outcomes were reviewed. Of those reporting dental implant outcomes, five articles, representing a total of 302 cases, were included in the meta-analysis. Use of CSP was associated with a significant increase in the likelihood of dental implant placement, with an odds ratio of 2.70 (95% CI 1.52 to 4.79, p = 0.0007). Standardised reporting methods and controlled studies are needed to further investigate the impact of CSP and CAD/CAM technologies on functional outcomes and patient-reported quality of life in free flap mandibular reconstruction. Use of CSP and CAD/CAM technologies is associated with higher rates of dental implant placement in patients undergoing free flap mandibular reconstruction when compared to conventional freehand techniques.

Retrospective three-dimensional analysis of bone resorption volumes of free microvascular scapular and fibular grafts

Defects in head and neck regions are standardly treated with microvascular grafts, such as free scapular (SFF) and fibular flaps (FFF), which are subject to a certain amount of bone resorption over time. The aim of this study was the 3-dimensional evaluation of bone resorption volume in both grafts. Over a period of 10 years, computed tomograms (CT) of patients with mandibular reconstructions with SFFs and FFFs were examined. The respective grafts were segmented as well as 3-dimensionally measured. Furthermore, factors such as gender, age, nicotine abuse, previous disease with type 2 diabetes, and adjuvant therapies, were examined for their influence. A total of 211 CT scans from 67 patients (40 SFFs and 27 FFFs) were included in the study. SFFs showed slightly higher median bone volumes (87.60% at 730 days and 86.55% at 1500 days) than FFFs (84.40% at 730 days and 82.10% at 1500 days). When final volumes were considered, FFFs had higher mean volume values (88.22%) than SFFs (83.82%), with significant correlation between resorption volume and time progression (r = 0.357, p = 0.024). All previously mentioned factors had no significant effect on bone resorption. Bone volumes of FFFs showed postoperative volume reductions similar to those of SFFs, with isolated SFFs having markedly lower volume values. The choice of a microvascular graft for reconstruction in the mandible proves difficult regarding bone resorption. The presented results may support decisions about future transplantations.

Mandible reconstruction with free fibula flaps: Accuracy of a cost-effective modified semicomputer-assisted surgery compared with computer-assisted surgery - A retrospective study

A new individualized, cost-effective, modified semi-computer-assisted surgery (MSCAS) concept for free fibular flap mandibular reconstruction is reported and compared with the computer-assisted surgery (CAS) concept. Patients were divided into two groups and retrospectively reviewed. In the MSCAS and CAS groups, intraoperative guides were created using computer-aided design with manual fabrication and computer-aided design and manufacturing, respectively. Differences in specific linear and angular parameters on pre- and postoperative computed tomography scans were calculated for morphometric comparison, and clinical parameters and efficiency were analysed. RESULTS: Eighteen patients (CAS, 7; MSCAS, 11), were included. The morphometric comparison showed no significant differences between the groups. The mean deviation of the mandibular ramus length, body length, width 1 and width 2 was 0.82 ± 0.29 mm, 1.84 ± 0.43 mm, 1.89 ± 0.61 mm and 1.45 ± 0.61 mm in the CAS group versus 1.56 ± 0.54 mm, 1.72 ± 0.33 mm, 2.24 ± 0.55 mm and 2.36 ± 0.50 mm in the MSCAS group (p = 0.7804, p = 0.9997, p = 0.9814 and p = 0.6334). The mean deviation of the sagittal, axial and coronal mandibular angles was 1.56 ± 0.48°, 1.93 ± 0.50° and 2.15 ± 0.72° in the CAS group versus 2.19 ± 0.35°, 1.86 ± 0.35° and 1.94 ± 0.55° in the MSCAS group (p = 0.7594, p = 0.9996 and p = 0.9871). There were no significant differences in clinical parameters, efficiency or postoperative complications between the groups. CONCLUSION: The accuracy and operative efficiency of the MSCAS concept are comparable to those of the more expensive CAS concept. Therefore, in times of increasing clinical costs, this concept might be an adequate and inexpensive alternative to preoperative CAS.

The Feasibility of Eustachian Tube Dilation With a Standard Endovascular Balloon: A Comparative Cadaver Study

BACKGROUND

Balloon dilation of the eustachian tube is a new therapeutic option for eustachian tube dysfunction. One of the limiting factors of wider adoption of this technique in many parts of the world is the high cost of the devices, in spite of regulatory approval of safety.

OBJECTIVE

Evaluate the performance and usability of standard less-expensive endovascular balloons for eustachian tube dilation in comparison to an approved device in a preclinical study.

STUDY DESIGN

Comparative cadaver feasibility study.

SETTING

University tertiary care facility.

METHODS

Ten eustachian tube dilations were performed with an approved eustachian tube dilation device. Ten other procedures were carried out with an endovascular balloon of similar dimensions. Cone beam computerized tomography was performed to evaluate the extent of dilation and possible damages. The lumen and mucosal lining were inspected endoscopically post-dilation. Volume measurements were compared before and after the procedure in both groups using contrast enhancement.

RESULTS

All 20 eustachian tube dilations were carried out successfully. No tissue damages could be identified on cone-beam computerized tomography or via endoscopic examination. There was a statistically significant difference of eustachian tube volumes between pre- and post-dilations, with no statistically significant difference between the devices.

CONCLUSION

Eustachian tube dilation with a less costly endovascular balloon achieved similar results to an approved eustachian tube dilation device. No damages or any other safety concerns were identified in a cadaver study.

Preclinical study of additive manufactured plates with shortened lengths for complete mandible reconstruction: Design, biomechanics simulation, and fixation stability assessment

BACKGROUND

A combination of short titanium plates fabricated using additive manufacturing (AM) provides multiple advantages for complete mandible reconstruction, such as the minimisation of inherent implant deformation formed during AM and the resulting clinical impact, as well as greater flexibility for surgical operation. However, the biomechanical feasibility of this strategy is still unclear, and therefore needs to be explored.

METHOD

Three different combinations of short mandible reconstruction plates (MRPs) were customised considering implant deformation during the AM process. The resulting biomechanical performance was analysed by finite element analysis (FEA) and compared to a conventional single long MRP.

RESULTS

The combination of a long plate and a short plate (Design 3 [LL61 mm/RL166 mm]) shows superior biomechanical properties to the conventional single long plate (Design 1 [TL246 mm]) and reveals the most reliable fixation stability among the three designs with short plates. Compared to conventional Design 1, Design 3 provides higher plate safety (maximum tensile stress on plates reduced by 6.3%), lower system fixation instability (relative total displacement reduced by 41.4%), and good bone segment stability (bone segment dislocation below 42.1 μm) under masticatory activities.

CONCLUSIONS

Preclinical evidence supports the biomechanical feasibility of using short MRPs for complete mandible reconstruction. Furthermore, the results could also provide valuable information when treating other large-sized bone defects using short customised implants, expanding the potential of AM for use in implant applications.

Survival of vascularized osseous flaps in mandibular reconstruction: A network meta-analysis

Objective

An evidence regarding which bony flap for reconstruction of mandibular defects following tumour resection is associated with the highest survival rate is still lacking. This network meta-analysis (NMA) aimed to guide surgeons selecting which vascularized osseous flap is associated with the highest survival rate for mandibular reconstruction.

Methods

From inception to March 2021, PubMed, Embase, Scopus, and Cochrane library were searched to identify the eligible studies. The outcome variable was the flap survival rate. The Bayesian NMA accompanied by a random effect model and 95% credible intervals (CrI) was calculated.

Results

Twenty-two studies with a total of 1513 patients, comparing four osseous flaps namely fibula free flap (FFF), deep circumferential iliac artery flap (DCIA), scapula flap, and osteocutaneous radial forearm flap (ORFF) were included. The respective survival rates of FFF, DCIA, Scapula, and ORFF were 94.50%, 93.12%, 97%, and 95.95%. The NMA failed to show a statistically significant difference between all comparators (FFF versus DCIA (Odd ratio, 1.8; CrI, 0.58,5.0); FFF versus ORFF (Odd ratio, 0.57; CrI, 0.077; 2.9); FFF versus scapula flap (Odd ratio, 0.25; CrI, 0.026; 1.5); DCIA versus ORFF (Odd ratio, 0.32; CrI, 0.037; 2.1); DCIA versus scapula flap (Odd ratio, 0.14; CrI, 0.015; 1.1) and ORFF versus scapula flap (Odd ratio, 2.3; CrI, 0.16; 34)).

Conclusion

Within the limitations of the current NMA, FFF, DCIA, Scapula, and ORFF showed a comparable survival rate for mandibular reconstruction. Although the scapula flap reported the highest survival rate compared to other osseous flaps for mandibular reconstruction; however, the decision making when choosing an osseous flap should be based on many factors rather than simply flap survival rate.

Intraoperative ICG-based fluorescence-angiography in head and neck reconstruction: Predictive value for impaired perfusion of free flaps

The aim of this study was to prove the hypothesis that intraoperative fluorescence-angiography using indocyanine-green (ICGFA) can be used to predict the occurrence of perfusion-associated complications following microvascular reconstruction. Consecutively perioperative data of patients who received microvascular reconstruction of the head and neck region and underwent ICGFA immediately after anastomosis was established were analyzed. The flow parameters analyzed in the investigation were (1) the baseline (Int_Min) and (2) peak intensity (Int_Max) of fluorescence, (3) the quotient of the two aforementioned parameters (F_max/min) as an expression of the relative total increase, (4) the absolute difference in the two parameters (Diff_Int) in terms of amplitude, (5) the duration of the intensity increase (T_Rise) until the peak, and (6) the percent intensity increase per second (Rise/sec_rel). Within the first 2 weeks postoperatively, every flap complication was documented. Subsequently, statistical analysis of the flap outcome was performed based on the flow parameters obtained intraoperatively. Data of 67 patients (male/female: 41/26) with an average age of 64 years (range 29-84 years) were analyzed. In 10 of these patients, postoperative perfusion-associated complications were observed (arterial/venous/microcirculatory: 4/3/3; p = 0.12). The analysis of the intraoperatively obtained flow parameters showed a significant difference in the ratio of maximum and minimum intensity in arterial pedicle perfusion (F_max/min) of patients with and without complications (with vs. without complications: 2.3 ± 1.0 vs. 5.0 ± 4.9; p < 0.01) and strong correlation of the mentioned parameter with the occurrence of perfusion-associated complications (odds ratio = 0.27; p = 0.01). The ratio of maximum and minimum intensity (F_max/min) is a predictor for postoperative venous stasis, arterial hypoperfusion and impaired microcirculation of a microvascular flap. Anastomoses with F_max/min <2.85 should be revised. However, a high technique sensitivity has to be considered, due to which sufficient hemostasis and reduction of motion artefacts have to be taken into account in order to obtain useable data.

Anatomical and volumetric analysis of fibro-osseous lesions of the craniofacial skeleton

PURPOSE

Our study aimed to provide volumetric data relating to fibro-osseous lesions of the craniofacial skeleton, in order to highlight risk factors due to the different entities, and to guide clinical decisions for jeopardized patients.

METHODS

Volumetric measurements of osteomas and ossifying fibromas were performed by applying the open-source software ITK-Snap to cone-beam computed tomography images. DICOM datasets were imported, identified, and delineated using semiautomatic segmentation; this was then verified using manual segmentation. The volumes of the lesions were computed automatically in cubic millimeters using the program. For statistical investigations, descriptive statistics and independent Student t-tests were performed. Additionally, Pearson's correlation was applied as a bivariate analysis. Values of p < 0.05 were considered significant.

RESULTS

45 patients (11 male and 34 female) were included in this study. The mean volumes were 10.02 ± 18.79 cm³ for osteomas and 4.80 ± 5.71 cm³ for ossifying fibromas (p = 0.016). Males (12.81 ± 20.38 cm³) presented significantly larger volumes than females (5.43 ± 10.32 cm³) (p = 0.042). With regard to shape, morphology, and affection of surrounding anatomical structures, irregular shape (p = 0.001; p = 0.037), multilocular morphology (p = 0.001; p = 0.037), nerve affection (p = 0.001; p = 0.002), tooth affection (p = 0.001; p = 0.594), cortical bone exceedance (p = 0.033; p = 0.001), and clinically visible symptoms (p = 0.004; p = 0.001) were statistically significantly associated with a larger volume of both entities.

CONCLUSION

Volumetric analysis revealed that osteomas significantly exceeded the mean size of ossifying fibromas, supporting the argument that special attention should be paid to this entity. In cases of difficult histopathological examination, lesions with irregular shape, multilocular morphology, nerve and tooth affection, cortical bone exceedance, and clinically visible symptoms should be considered for close clinico-radiological follow-up, irrespective of the entity.

A Volumetric and Morphological Analysis of Recurrent Odontogenic Keratocysts by Semiautomatic Segmentation

PURPOSE

The authors conducted this study to provide morphological and volumetric data of recurrent odontogenic keratocysts of the upper and lower jaw to emphasize risk factors in accordance with their radiological appearance and guide clinical decisions for jeopardized patients.

METHODS

By applying the open-source software "ITK-Snap" on cone-beam computed tomography images, volumetric measurements of histopathologically diagnosed recurrent odontogenic keratocysts could be performed. For statistical investigations, descriptive statistics and independent Student t test were performed. The intraclass correlation coefficient was used to assess intra- and inter-rater reliabilities. P values P < 0.05 were considered significant.

RESULTS

Forty patients (24 male and 16 female) were included in this study. Recurrent odontogenic keratocysts had a mean maximum diameter of 28.91 mm ± 12.00 mm and a mean volume of 4.48 cm3 ± 4.29 cm3. According to morphology, irregular shape (P = 0.001; P = 0.005), unclear margin (P = 0.001; P = 0.001), multilocular morphology (P = 0.001; P = 0.001), and cortical bone exceedance (P = 0.001; P = 0.007) are statistically significantly associated with a larger cyst diameter and volume. Furthermore, significant differences by diameter and volume could be shown between patients with and without iliac crest graft reconstruction (P = 0.001; P = 0.001).

CONCLUSIONS

Volumetric analysis reveals that recurrent odontogenic keratocysts show large diametric and volumetric extension that leads to complex reconstruction by iliac crest grafts, adding an argument that special attention should be paid to this entity and its recurrence. In case of difficult histopathological examination, lesions with irregular shape and margin, multilocular morphology, cortical bone exceedance, and clinically visible symptoms should be considered for close morphological and volumetric clinico-radiological follow-up.

Vertical mandibular bone augmentation by the osteodistraction of the transplanted fibula free flap: A case series with long-term follow-up

Vertical augmentation of the mandible to prepare dental implant therapy is still a challenge, especially with large mandible defects. Reconstruction with fibula free flap is a regularly applied approach in such cases, but it does not always yield optimal results: the resulting crestal height might differ significantly from the crestal height of the patient's intact bone, which makes esthetic and functional rehabilitation difficult. Osteodistraction of the integrated flap is a known but rarely discussed approach where the already integrated flap undergoes additional distraction. Through the four cases reported here, we would like to demonstrate that the osteodistraction of the transplanted fibula free flap is a useful and efficient method of secondary augmentation for cases where the flap itself fails to produce the desired crestal height, and no other method is applicable. The cases show that the method allows outcomes that are highly satisfactory, both in the functional and esthetic sense.