Locally delivered salicylic acid from a poly(anhydride-ester): impact on diabetic bone regeneration

Sustained Release of Salicylic Acid for Halting Peri-Implantitis Progression in Healthy and Hyperglycemic Systemic Conditions: A Gottingen Minipig Model

To develop a peri-implantitis model in a Gottingen minipig and evaluate the effect of local application of salicylic acid poly(anhydride-ester) (SAPAE) on peri-implantitis progression in healthy, metabolic syndrome (MS), and type-2 diabetes mellitus (T2DM) subjects. Eighteen animals were allocated to three groups: (i) control, (ii) MS (diet for obesity induction), and (iii) T2DM (diet plus streptozotocin for T2DM induction). Maxillary and mandible premolars and first molar were extracted. After 3 months of healing, four implants per side were placed in both jaws of each animal. After 2 months, peri-implantitis was induced by plaque formation using silk ligatures. SAPAE polymer was mixed with mineral oil (3.75 mg/μL) and topically applied biweekly for up to 60 days to halt peri-implantitis progression. Periodontal probing was used to assess pocket depth over time, followed by histomorphologic analysis of harvested samples. The adopted protocol resulted in the onset of peri-implantitis, with healthy minipigs taking twice as long to reach the same level of probing depth relative to MS and T2DM subjects (∼3.0 mm), irrespective of jaw. In a qualitative analysis, SAPAE therapy revealed decreased levels of inflammation in the normoglycemic, MS, and T2DM groups. SAPAE application around implants significantly reduced the progression of peri-implantitis after ∼15 days of therapy, with ∼30% lower probing depth for all systemic conditions and similar rates of probing depth increase per week between the control and SAPAE groups. MS and T2DM conditions presented a faster progression of the peri-implant pocket depth. SAPAE treatment reduced peri-implantitis progression in healthy, MS, and T2DM groups.

Advances in 3D Printing of Highly Bioadaptive Bone Tissue Engineering Scaffolds

The number of patients with bone defects caused by trauma, bone tumors, and osteoporosis has increased considerably. The repair of irregular, recurring, and large bone defects poses a great challenge to clinicians. Bone tissue engineering is emerging as an appropriate strategy to replace autologous bone grafting in the repair of critically sized bone defects. However, the suitability of bone tissue engineering scaffolds in terms of structure, mechanics, degradation, and the microenvironment is inadequate. Three-dimensional (3D) printing is an advanced additive-manufacturing technology widely used for bone repair. 3D printing constructs personalized structurally adapted scaffolds based on 3D models reconstructed from CT images. The contradiction between the mechanics and degradation is resolved by altering the stacking structure. The local microenvironment of the implant is improved by designing an internal pore structure and a spatiotemporal factor release system. Therefore, there has been a boom in the 3D printing of personalized bone repair scaffolds. In this review, successful research on the preparation of highly bioadaptive bone tissue engineering scaffolds using 3D printing is presented. The mechanisms of structural, mechanical, degradation, and microenvironmental adaptations of bone prostheses and their interactions were elucidated to provide a feasible strategy for constructing highly bioadaptive bone tissue engineering scaffolds.

4D Printable Salicylic Acid Photopolymers for Sustained Drug Releasing, Shape Memory, Soft Tissue Scaffolds

3D printing of pharmaceuticals offers a unique opportunity for long-term, sustained drug release profiles for an array of treatment options. Unfortunately, this approach is often limited by physical compounding or processing limitations. Modification of the active drug into a prodrug compound allows for seamless incorporation with advanced manufacturing methods that open the door to production of complex tissue scaffold drug depots. Here we demonstrate this concept using salicylic acids with varied prodrug structures for control of physical and chemical properties. The role of different salicylic acid derivatives (salicylic acid, bromosalicylic allyl ester, iodosalicylic allyl ester) and linker species (allyl salicylate, allyl 2-(allyloxy)benzoate, allyl 2-(((allyloxy)carbonyl)oxy)benzoate) were investigated using thiol-ene cross-linking in digital light processing (DLP) 3D printing to produce porous prodrug tissue scaffolds containing more than 50% salicylic acid by mass. Salicylic acid photopolymer resins were all found to be highly reactive (solidification within 5 s of irradiation at λ = 405 nm), while the cross-linked solids display tunable thermomechanical behaviors with low glass transition temperatures (Tgs) and elastomeric behaviors, with the carbonate species displaying an elastic modulus matching that of adipose tissue (approximately 65 kPa). Drug release profiles were found to be zero order, sustained release based upon hydrolytic degradation of multilayered scaffolds incorporating fluorescent modeling compounds, with release rates tuned through selection of the linker species. Cytocompatibility in 2D and 3D was further demonstrated for all species compared to polycarbonate controls, as well as salicylic acid-containing composites (physical incorporation), over a 2-week period using murine fibroblasts. The use of drugs as the matrix material for solid prodrug tissue scaffolds opens the door to novel therapeutic strategies, longer sustained release profiles, and even reduced complications for advanced medicine.

The role of non-steroidal anti-inflammatory drugs as adjuncts to periodontal treatment and in periodontal regeneration

Periodontitis is the sixth most prevalent chronic disease globally and places significant burdens on societies and economies worldwide. Behavioral modification, risk factor control, coupled with cause-related therapy have been the "gold standard" treatment for managing periodontitis. Given that host inflammatory and immunological responses play critical roles in the pathogenesis of periodontitis and impact treatment responses, several adjunctive strategies aimed at modulating host responses and improving the results of periodontal therapy and maintenance have been proposed. Of the many pharmacological host modulators, we focused on non-steroidal anti-inflammatory drugs (NSAIDs), due to their long history and extensive use in relieving inflammation and pain and reducing platelet aggregation. NSAIDs have been routinely indicated for treating rheumatic fever and osteoarthritis and utilized for the prevention of cardiovascular events. Although several efforts have been made to incorporate NSAIDs into the treatment of periodontitis, their effects on periodontal health remain poorly characterized, and concerns over the risk-benefit ratio were also raised. Moreover, there is emerging evidence highlighting the potential of NSAIDs, especially aspirin, for use in periodontal regeneration. This review summarizes and discusses the use of NSAIDs in various aspects of periodontal therapy and regeneration, demonstrating that the benefits of NSAIDs as adjuncts to conventional periodontal therapy remain controversial. More recent evidence suggests a promising role for NSAIDs in periodontal tissue engineering and regeneration.

Degradable polyprodrugs: design and therapeutic efficiency

Prodrugs are developed to increase the therapeutic properties of drugs and reduce their side effects. Polyprodrugs emerged as highly efficient prodrugs produced by the polymerization of one or several drug monomers. Polyprodrugs can be gradually degraded to release therapeutic agents. The complete degradation of polyprodrugs is an important factor to guarantee the successful disposal of the drug delivery system from the body. The degradation of polyprodrugs and release rate of the drugs can be controlled by the type of covalent bonds linking the monomer drug units in the polymer structure. Therefore, various types of polyprodrugs have been developed based on polyesters, polyanhydrides, polycarbonates, polyurethanes, polyamides, polyketals, polymetallodrugs, polyphosphazenes, and polyimines. Furthermore, the presence of stimuli-responsive groups, such as redox-responsive linkages (disulfide, boronate ester, metal-complex, and oxalate), pH-responsive linkages (ester, imine, hydrazone, acetal, orthoester, P-O and P-N), light-responsive (metal-complex, o-nitrophenyl groups) and enzyme-responsive linkages (ester, peptides) allow for a selective degradation of the polymer backbone in targeted tumors. We envision that new strategies providing a more efficient synergistic therapy will be developed by combining polyprodrugs with gene delivery segments and targeting moieties.

Enabling technologies towards personalization of scaffolds for large bone defect regeneration

Additive manufacturing (AM) can deliver personalized scaffolds to support large volume defect tissue regeneration - a major clinical challenge in many medical disciplines. The freedom in scaffold design and composition (biomaterials and biologics) offered by AM yields a plethora of possibilities but is confronted with a heterogenous biological regeneration potential across individuals. A key challenge is to make the right choice for individualized scaffolds that match biology, anatomy, and mechanics of patients. This review provides an overview of state-of-the-art technologies, that is, in silico modelling for scaffold design, omics and bioinformatics to capture patient biology and information technology for data management, that, when combined in a synergistic way with AM, have great potential to make personalized tissue regeneration strategies available to all patients, empowering precision medicine.

Systemically impaired fracture healing in small animal research: A review of fracture repair models

Fracture healing is a complex process requiring mechanical stability, an osteoconductive matrix, and osteoinductive and osteogenic biology. This intricate process is easily disrupted by various patient factors such as chronic disease and lifestyle. As the medical complexity and age of patients with fractures continue to increase, the importance of developing relevant experimental models is becoming paramount in preclinical research. The objective of this review is to describe the most common small animal models of systemically impaired fracture healing used in the orthopedic literature including osteoporosis, diabetes mellitus, smoking, alcohol use, obesity, and ageing. This review will provide orthopedic researchers with a summary of current models of systemically impaired fracture healing used in small animals and present an overview of the methods of induction for each condition.

The influence of acetylsalicylic acid on bone regeneration: systematic review and meta-analysis

Acetylsalicylic acid (ASA) is commonly used as a non-steroidal anti-inflammatory drug that interferes with multiple biological pathways. ASA acts by stimulating osteogenesis and inhibiting osteoclastogenesis. Thus, the objective of this study was to perform a systematic review and meta-analysis to evaluate the effectiveness of the use of ASA in the bone regeneration in animal models. This review was structured based on the PRISMA Statement and registered on PROSPERO database according to protocol number #CDR42018111403. The quality of evidence was assessed by using the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE). With the development of search strategies, we identified studies on the use of ASA from the following databases: 1- Medline (via PubMed); 2 - Web of Science; 3 - Scopus; and 4 - EMBASE. A total of 296 articles were identified and after screening the title, abstract, and full text, only 18 studies were selected for qualitative analysis and 12 were selected for performance of the quantitative analysis (meta-analysis). A meta-analysis of the amount of bone tissue formed showed a significant advantage when ASA was locally used, revealing a mean difference (MD) of 22.75% (95% CI: 15.39-30.12) p < 0.00001. Within the limitations of the available data, the results were promising and showed that ASA can be effective in bone formation in animal models.

Effects of NSAIDs and environmental oxygen pressure on bone regeneration

Objective: To evaluate the effects of administering diclofenac and ketoprofen, as well as the effects of environmental oxygen pressure variation on mandibular bone regeneration. Methods: Thirty-six guinea pigs were distributed into two equal groups. Mandibular bone defects were performed on both groups. Group A was monitored under oxygen pressure at altitude (3320msl, 107mm Hg). Group B was monitored at sea level oxygen pressure (150msl, 157mm Hg). Each group was subdivided into 3 equal groups (A1, A2, A3 and B1, B2, B3). Subgroups A1 and B1 were given diclofenac; subgroups A2 and B2 ketoprofen; subgroups A3 and B3 NaCl. Bone regeneration was evaluated histologically on days 15 and 30. Results: After 15 days in the group controlled at sea level, the level of osteoblasts presented by the control subgroup was significantly higher (28.00±2.65) compared to the diclofenac subgroup (16.00±6.25) and to the ketoprofen subgroup (18.00±4.36); (p=0.041). After 15 days in the group controlled at altitude, the level of osteoblasts was significantly higher in the control subgroup (38.00±5.29) compared to the diclofenac subgroup (21.67±6.35) and to the ketoprofen subgroup (19.33±2.52); p=0.007. After 30 days in the group at sea level there was no difference found in the cell counting; p>0.05. After 30 days in the group controlled at altitude, the level of osteoblast was significantly higher in the control subgroup (58.00±4.58) compared to the diclofenac subgroup (34.33±4.73) and the ketoprofen subgroup (34.00±11.14); (p=0.003). Conclusion: The administration of diclofenac and ketoprofen produced lower mandibular bone regeneration, the effect being significantly more negative at sea level.

Controlled delivery of recombinant human bone morphogenetic protein-2 by using glucose-sensitive core–shell nanofibers to repair the mandible defects in diabetic rats

Glucose-sensitive core–shell nanofibers that can self-regulate the rhBMP-2 release and enhance a diabetic rat's mandible regeneration capability.

Preclinical therapies to prevent or treat fracture non-union: A systematic review

Background

Non-union affects up to 10% of fractures and is associated with substantial morbidity. There is currently no single effective therapy for the treatment or prevention of non-union. Potential treatments are currently selected for clinical trials based on results from limited animal studies, with no attempt to compare results between therapies to determine which have the greatest potential to treat non-union.

Aim

The aim of this systematic review was to define the range of therapies under investigation at the preclinical stage for the prevention or treatment of fracture non-union. Additionally, through meta-analysis, it aimed to identify the most promising therapies for progression to clinical investigation.

Methods

MEDLINE and Embase were searched from 1^St January 2004 to 10^th April 2017 for controlled trials evaluating an intervention to prevent or treat fracture non-union. Data regarding the model used, study intervention and outcome measures were extracted, and risk of bias assessed.

Results

Of 5,171 records identified, 197 papers describing 204 therapies were included. Of these, the majority were only evaluated once (179/204, 88%), with chitosan tested most commonly (6/204, 3%). Substantial variation existed in model design, length of survival and duration of treatment, with results poorly reported. These factors, as well as a lack of consistently used objective outcome measures, precluded meta-analysis.

Conclusion

This review highlights the variability and poor methodological reporting of current non-union research. The authors call for a consensus on the standardisation of animal models investigating non-union, and suggest journals apply stringent criteria when considering animal work for publication.

The Foreign Body Response Demystified

The human body is endowed with an uncanny ability to distinguish self from foreign. The implantation of a foreign object inside a mammalian host activates complex signaling cascades, which lead to biological encapsulation of the implant. This reaction by the host system to a foreign object is known as foreign body response (FBR). Over the last few decades, it has been increasingly important to have a deeper insight into the mechanisms of FBR is needed to develop biomaterials for better integration with living systems. In the light of recent advances in tissue engineering and regenerative medicine, particularly in the field of biosensors and biodegradable tissue engineering scaffolds, the classical concepts related to the FBR have acquired new dimensions. The aim of this review is to provide a holistic view of the FBR, while critically analyzing the challenges, which need to be addressed in the future to overcome this innate response. In particular, this review discusses the relevant experimental methodology to assess the host response. The role of erosion and degradation behavior on FBR with biodegradable polymers is largely explored. Apart from the discussion on temporal progression of FBR, an emphasis has been given to the design of next-generation biomaterials with favorable host response.

Aspirin inhibits LPS-induced macrophage activation via the NF-κB pathway

Aspirin (acetylsalicylic acid, ASA) has been shown to improve bone marrow mesenchymal stem cell-based calvarial bone regeneration by promoting osteogenesis and inhibiting osteoclastogenesis. However, it remains unknown whether aspirin influences other immune cells during bone formation. In the present study, we investigated whether ASA treatment influenced macrophage activation during the LPS inducement. We found that ASA could downregulate the expressions of iNOS and TNF-α both in mouse peritoneum macrophages and RAW264.7 cells induced by LPS via the IκK/IκB/NF-κB pathway and a COX₂/PGE₂/EP₂/NF-κB feedback loop, without affecting the expressions of FIZZ/YM-1/ARG1 induced by IL-4. Furthermore, we created a rat mandibular bone defect model and showed that ASA treatment improved bone regeneration by inhibiting LPS-induced macrophage activation in the early stages of inflammation. Taken together, our results indicated that ASA treatment was a feasible strategy for improving bone regeneration, particularly in inflammatory conditions.

Physically crosslinked salicylate-based poly (N-isopropylacrylamide-co-acrylic acid) hydrogels for protein delivery

Physically crosslinked hydrogels were developed via solvent casting methods using a temperature-sensitive polymer, poly( N-isopropylacrylamide- co-acrylic acid), and a therapeutic polymer, salicylate-based poly(anhydride-esters), to concurrently release salicylic acid and bovine serum albumin in a sustained manner. The physical interactions between the two polymer systems were confirmed using Fourier transform infrared spectroscopy. The crosslinked polymers were porous, thus able to encapsulate bovine serum albumin (23 wt%) and then released the protein in a sustained fashion over 96 h. Concurrently, the hydrogel releases salicylic acid in a sustained manner up to 120 h. Hydrogel systems were cytocompatible at relevant therapeutic concentrations. These hydrogel systems can be used for simultaneous delivery of salicylic acid and protein to achieve synergic effects.

TNFα contributes to diabetes impaired angiogenesis in fracture healing

Diabetes increases the likelihood of fracture, interferes with fracture healing and impairs angiogenesis. The latter may be significant due to the critical nature of angiogenesis in fracture healing. Although it is known that diabetes interferes with angiogenesis the mechanisms remain poorly defined. We examined fracture healing in normoglycemic and streptozotocin-induced diabetic mice and quantified the degree of angiogenesis with antibodies to three different vascular markers, CD34, CD31 and Factor VIII. The role of diabetes-enhanced inflammation was investigated by treatment of the TNFα-specific inhibitor, pegsunercept starting 10days after induction of fractures. Diabetes decreased both angiogenesis and VEGFA expression by chondrocytes. The reduced angiogenesis and VEGFA expression in diabetic fractures was rescued by specific inhibition of TNF in vivo. In addition, the TNF inhibitor rescued the negative effect of diabetes on endothelial cell proliferation and endothelial cell apoptosis. The effect of TNFα in vitro was enhanced by high glucose and an advanced glycation endproduct to impair microvascular endothelial cell proliferation and tube formation and to stimulate apoptosis. The effect of TNF, high glucose and an AGE was mediated by the transcription factor FOXO1, which increased expression of p21 and caspase-3. These studies indicate that inflammation plays a major role in diabetes-impaired angiogenesis in endochondral bone formation through its effect on microvascular endothelial cells and FOXO1.

Diabetes Mellitus and Bone Regeneration: A Systematic Review and Meta-Analysis of Animal Studies

BACKGROUND

The regeneration of bone defects resulting from trauma, resection of tumors, infection, or congenital disease is a challenge, and bone grafts are utilized in a wide array of clinical settings to augment bone repair and regeneration. Diabetes mellitus (DM) is a chronic metabolic disease, which affects 8.3% of the world population, summing ∼387 million individuals. The consequences of the disease, for example, hyperglycemia, have been associated to a reduced capacity to form bone and poor bone quality, influencing bone healing. Our aim was to systematically review the literature to the effect of diabetic condition on bone regeneration in animal models, when using bone substitute materials from different origins, and perform a meta-analysis to quantitatively study the effect of DM on bone regeneration.

METHODS

An extensive search strategy was carried out through PubMed and EMBASE to identify the potential relevant studies published from database inception until July 1, 2015. Initially, the title and abstract of 1409 studies were screened, after which inclusion criteria sorted 29 studies for full-text evaluation. After using exclusion criteria, a final number of seven studies could be included in the review.

RESULTS

The seven included studies that passed our inclusion/exclusion criteria were all type 1 diabetes, comprising a total of 189 animals and 14 intrastudy comparisons. These studies presented a consistent and reduced risk of bias and showed a significant average effect size of -6.87% of bone formation for diabetes type 1 versus healthy condition [95% confidence interval: -10.55 to -3.18; I² = 87.4%; p = 0.0003].

INTERPRETATION

These findings prove that DM type 1 negatively influences bone formation compared with a healthy condition, irrespective of the bone substitute material used.

Stem and progenitor cells: advancing bone tissue engineering

Unlike many other postnatal tissues, bone can regenerate and repair itself; nevertheless, this capacity can be overcome. Traditionally, surgical reconstructive strategies have implemented autologous, allogeneic, and prosthetic materials. Autologous bone--the best option--is limited in supply and also mandates an additional surgical procedure. In regenerative tissue engineering, there are myriad issues to consider in the creation of a functional, implantable replacement tissue. Importantly, there must exist an easily accessible, abundant cell source with the capacity to express the phenotype of the desired tissue, and a biocompatible scaffold to deliver the cells to the damaged region. A literature review was performed using PubMed; peer-reviewed publications were screened for relevance in order to identify key advances in stem and progenitor cell contribution to the field of bone tissue engineering. In this review, we briefly introduce various adult stem cells implemented in bone tissue engineering such as mesenchymal stem cells (including bone marrow- and adipose-derived stem cells), endothelial progenitor cells, and induced pluripotent stem cells. We then discuss numerous advances associated with their application and subsequently focus on technological advances in the field, before addressing key regenerative strategies currently used in clinical practice. Stem and progenitor cell implementation in bone tissue engineering strategies have the ability to make a major impact on regenerative medicine and reduce patient morbidity. As the field of regenerative medicine endeavors to harness the body's own cells for treatment, scientific innovation has led to great advances in stem cell-based therapies in the past decade.

Sustained, localized salicylic acid delivery enhances diabetic bone regeneration via prolonged mitigation of inflammation

Diabetes is a metabolic disorder caused by insulin resistance and/or deficiency and impairs bone quality and bone healing due to altered gene expression, reduced vascularization, and prolonged inflammation. No effective treatments for diabetic bone healing are currently available, and most existing treatments do not directly address the diabetic complications that impair bone healing. We recently demonstrated that sustained and localized delivery of salicylic acid (SA) via an SA-based polymer provides a low-cost approach to enhance diabetic bone regeneration. Herein, we report mechanistic studies that delve into the biological action and local pharmacokinetics of SA-releasing polymers shown to enhance diabetic bone regeneration. The results suggest that low SA concentrations were locally maintained at the bone defect site for more than 1 month. As a result of the sustained SA release, a significantly reduced inflammation was observed in diabetic animals, which in turn, yielded reduced osteoclast density and activity, as well as increased osteoblastogenesis. Based upon these results, localized and sustained SA delivery from the SA-based polymer effectively improved bone regeneration in diabetic animals by affecting both osteoclasts and osteoblasts, thereby providing a positive basis for clinical treatments. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2595-2603, 2016.

Biodegradable Polymer Membranes Applied in Guided Bone/Tissue Regeneration: A Review

Polymer membranes have been widely used in guided tissue regeneration (GTR) and guided bone regeneration (GBR). In this review, various commercially available membranes are described. Much attention is paid to the recent development of biodegradable polymers applied in GTR and GBR, and the important issues of biodegradable polymeric membranes, including their classification, latest experimental research and clinical applications, as well as their main challenges are addressed. Herein, natural polymers, synthetic polymers and their blends are all introduced. Pure polymer membranes are biodegradable and biocompatible, but they lack special properties such as antibacterial properties, osteoconductivity, and thus polymer membranes loaded with functional materials such as antibacterial agents and growth factors show many more advantages and have also been introduced in this review. Despite there still being complaints about polymer membranes, such as their low mechanical properties, uncontrollable degradation speed and some other drawbacks, these problems will undoubtedly be conquered and biodegradable polymers will have more applications in GTR and GBR.

High glucose microenvironments inhibit the proliferation and migration of bone mesenchymal stem cells by activating GSK3β

Diabetes mellitus involves metabolic changes that can impair bone repair. Bone mesenchymal stem cells (BMSCs) play an important role in bone regeneration. However, the bone regeneration ability of BMSCs is inhibited in high glucose microenvironments. It can be speculated that this effect is due to changes in BMSCs' proliferation and migration ability, because the recruitment of factors with an adequate number of MSCs and the microenvironment around the site of bone injury are required for effective bone repair. Recent genetic evidence has shown that the Cyclin D1 and the CXC receptor 4 (CXCR-4) play important roles in the proliferation and migration of BMSCs. In this study we determined the specific role of glycogen synthase kinase-3β (GSK3β) in the proliferation and migration of BMSCs in high glucose microenvironments. The proliferation and migration ability of BMSCs were suppressed under high glucose conditions. We showed that high glucose activates GSK3β but suppresses CXCR-4, β-catenin, LEF-1, and cyclin D1. Inhibition of GSK3β by LiCl led to increased levels of β-catenin, LEF-1, cyclin D1, and CXCR-4 expression. Our data indicate that GSK3β plays an important role in regulating the proliferation and migration of BMSCs by inhibiting cyclin D1 and CXCR-4 under high glucose conditions.

Salicylic acid-based poly(anhydride-ester) nerve guidance conduits: Impact of localized drug release on nerve regeneration

Nerve guidance conduits (NGCs) can serve as physical scaffolds aligning and supporting regenerating cells while preventing scar tissue formation that often interferes with the regeneration process. Numerous studies have focused on functionalizing NGCs with neurotrophic factors, for example, to support nerve regeneration over longer gaps, but few directly incorporate therapeutic agents. Herein, we fabricated NGCs from a polyanhydride comprised of salicylic acid (SA), a nonsteroidal anti-inflammatory drug, then performed in vitro and in vivo assays. In vitro studies included cytotoxicity, anti-inflammatory response, and NGC porosity measurements. To prepare for implantation, type I collagen hydrogels were used as NGC luminal fillers to further enhance the axonal regeneration process. For the in vivo studies, SA-NGCs were implanted in femoral nerves of mice for 16 weeks and evaluated for functional recovery. The SA-based NGCs functioned as both a drug delivery vehicle capable of reducing inflammation and scar tissue formation because of SA release as well as a tissue scaffold that promotes peripheral nerve regeneration and functional recovery.

Polyanhydrides: Synthesis, Properties, and Applications

This review focusses on polyanhydrides, a fascinating class of degradable polymers that have been used in and investigated for many bio-related applications because of their degradability and capacity to undergo surface erosion. This latter phenomenon is driven by hydrolysis of the anhydride moieties at the surface and high hydrophobicity of the polymer such that degradation and mass loss (erosion) occur before water can penetrate deep within the bulk of the polymer. As such, when surface-eroding polymers are used as therapeutic delivery vehicles, the rate of delivery is often controlled by the rate of polymer erosion, providing predictable and controlled release rates that are often zero-order. These desirable attributes are heavily influenced by polymer composition and morphology, and therefore also monomer structure and polymerization method. This review examines approaches for polyanhydride synthesis, discusses their general thermomechanical properties, surveys their hydrolysis and degradation processes along with their biocompatibility, and looks at recent developments and uses of polyanhydrides in drug delivery, stimuli-responsive materials, and novel nanotechnologies.

Polyactives: controlled and sustained bioactive release via hydrolytic degradation

Significant and promising advances have been made in the polymer field for controlled and sustained bioactive delivery. Traditionally, small molecule bioactives have been physically incorporated into biodegradable polymers; however, chemical incorporation allows for higher drug loading, more controlled release, and enhanced processability. Moreover, the advent of bioactive-containing monomer polymerization and hydrolytic biodegradability allows for tunable bioactive loading without yielding a polymer residue. In this review, we highlight the chemical incorporation of different bioactive classes into novel biodegradable and biocompatible polymers. The polymer design, synthesis, and formulation are summarized in addition to the evaluation of bioactivity retention upon release via in vitro and in vivo studies.

Long-term sustained release of salicylic acid from cross-linked biodegradable polyester induces a reduced foreign body response in mice

There has been a continuous surge toward developing new biopolymers that exhibit better in vivo biocompatibility properties in terms of demonstrating a reduced foreign body response (FBR). One approach to mitigate the undesired FBR is to develop an implant capable of releasing anti-inflammatory molecules in a sustained manner over a long time period. Implants causing inflammation are also more susceptible to infection. In this article, the in vivo biocompatibility of a novel, biodegradable salicylic acid releasing polyester (SAP) has been investigated by subcutaneous implantation in a mouse model. The tissue response to SAP was compared with that of a widely used biodegradable polymer, poly(lactic acid-co-glycolic acid) (PLGA), as a control over three time points: 2, 4, and 16 weeks postimplantation. A long-term in vitro study illustrates a continuous, linear (zero order) release of salicylic acid with a cumulative mass percent release rate of 7.34 × 10(-4) h(-1) over ∼1.5-17 months. On the basis of physicochemical analysis, surface erosion for SAP and bulk erosion for PLGA have been confirmed as their dominant degradation modes in vivo. On the basis of the histomorphometrical analysis of inflammatory cell densities and collagen distribution as well as quantification of proinflammatory cytokine levels (TNF-α and IL-1β), a reduced foreign body response toward SAP with respect to that generated by PLGA has been unambiguously established. The favorable in vivo tissue response to SAP, as manifest from the uniform and well-vascularized encapsulation around the implant, is consistent with the decrease in inflammatory cell density and increase in angiogenesis with time. The above observations, together with the demonstration of long-term and sustained release of salicylic acid, establish the potential use of SAP for applications in improved matrices for tissue engineering and chronic wound healing.

Cross-linked, biodegradable, cytocompatible salicylic acid based polyesters for localized, sustained delivery of salicylic acid: an in vitro study

In order to suppress chronic inflammation while supporting cell proliferation, there has been a continuous surge toward development of polymers with the intention of delivering anti-inflammatory molecules in a sustained manner. In the above backdrop, we report the synthesis of a novel, stable, cross-linked polyester with salicylic acid (SA) incorporated in the polymeric backbone and propose a simple synthesis route by melt condensation. The as-synthesized polymer was hydrophobic with a glass transition temperature of 1 °C, which increases to 17 °C upon curing. The combination of NMR and FT-IR spectral techniques established the ester linkages in the as-synthesized SA-based polyester. The pH-dependent degradation rate and the rate of release of salicylic acid from the as-synthesized SA-based polymer were studied at physiological conditions in vitro. The polyester underwent surface erosion and exhibited linear degradation kinetics in which a change in degradation rate is observed after 4-10 days and 24% mass loss was recorded after 4 months at 37 °C and pH 7.4. The delivery of salicylic acid also showed a similar change in slopes, with a sustained release rate of 3.5% in 4 months. The cytocompatibility studies of these polyesters were carried out with C2C12 murine myoblast cells using techniques like MTT assay and flow cytometry. Our results strongly suggest that SA-based polyester supports cell proliferation for 3 days in culture and do not cause cell death (<7%), as quantified by propidium iodide (PI) stained cells. Hence, these polyesters can be used as implant materials for localized, sustained delivery of salicylic acid and have applications in adjuvant cancer therapy, chronic wound healing, and as an alternative to commercially available polymers like poly(lactic acid) and poly(glycolic acid) or their copolymers.

Clopidogrel enhances periodontal repair in rats through decreased inflammation

AIM

We hypothesized that platelet inactivation induced by drugs might interfere with periodontal repair in experimental periodontitis by suppressing the release of biological mediators from platelets at the site of injury.

MATERIAL AND METHODS

Sixty rats were randomly assigned to six groups (n = 10) and ligatures were placed around lower first molars of three groups. The other three groups were used as negative controls. Ligatures were removed after 10 days of periodontitis induction and all groups were submitted to treatment with aspirin (Asp) (30 mg/kg), clopidogrel (Clop) (75 mg/kg) or NaCl 0.9% intra-gastrically once daily for 3 days. Periodontal tissue was assessed by the measurement of CXCL12, CXCL4, CCL5 and platelet-derived growth factor (PDGF) by enzyme-linked immunosorbent assay; histomorphometrical analysis of polymorphonuclear (PMN) infiltration, attachment loss, bone loss and osteoclast numbers and quantification of blood vessels by imunnohistochemistry.

RESULTS

During periodontal repair and treatment with NaCl 0.9%, CCL5 was decreased and CXCL12 increased when compared with negative control groups. Asp and Clop did not affect CCL5 expression, decreased CXCL12 but only Clop decreased CXCL4 and PDGF content compared with saline-treated animals. Clop increased blood vessel number, reduced PMN count and decreased attachment and bone loss, also decreased osteoclast number in animals submitted or not to periodontal repair.

CONCLUSION

Systemic administration of Clop for 3 days improved the repair process associated with experimental periodontal disease, suggesting that it may have therapeutic value under situations where tissues undergo a transition from inflammation to repair.