Nanoparticles and nanofibers for topical drug delivery

Harnessing nanofibers for targeted delivery of phytoconstituents in age-related macular degeneration

Age-related macular degeneration is a degenerative eye condition that affects the macula and results in central vision loss. Phytoconstituents show great promise in the treatment of AMD. AMD therapy can benefit from the advantages of phytoconstituents loaded nanofibers. There are opportunities to improve the effectiveness of phytoconstituents in the treatment of age-related macular degeneration (AMD) through the use of nanofiber-based delivery methods. These novel platforms encapsulate and distribute plant-derived bioactives by making use of the special qualities of nanofibers. These qualities include their high surface area-to-volume ratio, variable porosity, and biocompatibility. Exploring the use of nanofiber-based delivery methods to provide phytoconstituents in AMD treatment is a great choice for enhancing patient adherence, safety, and efficacy in managing this condition. This article explores the potential of nanofiber-based delivery methods to revolutionize AMD treatment, providing an innovative and effective approach to treat this condition.

Peptide-Based Strategies in PLGA-Enhanced Tumor Therapy

Peptide-based therapeutics have gained attention in cancer treatment because of their good specificity, low toxicity, and ability to modulate immune responses. However, challenges such as enzymatic degradation and poor bioavailability limit their clinical application. Peptide-functionalized poly(lactic-co-glycolic acid) (PLGA) systems have emerged as a transformative platform in cancer therapy that offers unique advantages, including enhanced stability, sustained release, and precise delivery of therapeutic agents. This review highlights the synergistic integration of peptides with PLGA and addresses key challenges of peptide-based therapeutics. The application of peptide-functionalized PLGA systems encompasses a diverse range of strategies for cancer therapy. In chemotherapy, peptides disrupt critical tumor pathways, induce apoptosis, and inhibit angiogenesis, demonstrating their versatility in targeting various aspects of tumor progression. In immunotherapy, peptides act as antigens to stimulate robust immune responses or as immune checkpoint inhibitors to restore T cell activity, overcoming tumor immune evasion. These systems also harness the enhanced permeability and retention effect, facilitating preferential accumulation in tumor tissues while leveraging tumor microenvironment (TME)-responsive mechanisms, such as pH-sensitive or enzyme-triggered drug release, to achieve controlled, localized delivery. Collectively, peptide-functionalized PLGA systems represent a promising, versatile approach for precise cancer therapy that integrates innovative delivery strategies with highly specific, potent therapeutic agents.

Cannabidiol-A friend or a foe?

Cannabidiol (CBD), one of the main actives from Cannabis sativa has been perpetually explored lately for its therapeutic effects. Its main attributes, such as anti-inflammatory and antioxidant effects, snowball into pain management, epilepsy and seizure alleviation, anxiety relief, as well as numerous other implications through the entire metabolism. However, conventional administration routes challenge its therapeutic potential, with reported poor water solubility, hepatic degradation, gastric instability and erratic bioavailability observed in oral administration. As a result, the transdermal delivery systems have emerged as a promising alternative to oral or inhaled routes, offering improved bioavailability and targeted effects. The medical use of CBD throughout Europe, UK, USA or Australia is extensive and usually represented by pharmaceutical preparations recommended after conventional treatment routs fail. The non-medical use is limited by each country's own legislation, a wider range of products being available, but the irregular regulatory landscape coupled with the growing market of cannabinoid-infused products, emphasizes the need for standardized formulations and further clinical research. The present work critically examines the transdermal administration of cannabidiol, explores the skin's potential as a route and the strategies involved in using it for systemic targeting. We highlighted key challenges and provided insights into CBD`s variable bioavailability based on different administration routes and methods, thus compiling a literature-based absorption, distribution, metabolism, and excretion (ADME) study. We also explore the role of the endocannabinoid system, its function in various medical conditions, and the therapeutic effects associated with CBD, particularly in light of the varying legislation across countries. While the breadth of potential benefits is compelling, it is essential to emphasize the ongoing nature of CBD research as individual responses to it can vary significantly.

Elimination of intracellular microbes using drug combination therapy and unveiling survival mechanism of host cells upon microbial invasion

Intracellular microbes are actively present in various tumor types in low biomass and play a major role in metastasis. Eliminating intracellular microbes on a cellular level with precision remains a challenge. To address this issue, we designed a screening pipeline to characterize intracellular microbes and their interaction with host cells. We used host and microbial in vitro lab-based constant and reproducible model, host as (mammalian cancer HeLa), and microbial strain as (Escherichia coli 25922). To study the pharmacological impact on intracellular bacterial load, we used antibiotics (ampicillin, roxithromycin, and ciprofloxacin) and chemotherapy drugs (doxorubicin and cisplatin) as external stimuli for both host and microbes. We found that increasing pharmacological stress does not increase microbial load inside the host cells. Eliminations of intracellular bacteria was done by using permutation orthogonal arrays (POA), whereby we acquired optimal drug combination in particular sequence of drugs, which reduced 90%-95% of the intracellular microbial load. Proteomic analysis revealed that upon invasion of Escherichia coli 25922, HeLa cells enriched ATP production pathways to activate intermediate filaments, which should be investigated closely via in vivo models.

Novel strategies in topical delivery for psoriasis treatment: nanocarriers and energy-driven approaches

INTRODUCTION

Psoriasis is characterized by abnormal differentiation and hyperproliferation of epidermal keratinocytes. This condition presents significant challenges for effective drug delivery. In addition to overcoming the thickness of the skin, topical treatments must navigate the complex hydrophobic and hydrophilic properties of the skin barrier. Recent advancements in nanocarrier technologies, including energy-driven methods and microneedles that penetrate the stratum corneum, present promising strategies for enhancing drug permeation through tailored physicochemical properties. A literature search was performed using the databases of Google Scholar, PubMed, and ScienceDirect.

AREAS COVERED

This review highlights recent studies on novel topical delivery methods for psoriasis treatment, addressing current therapeutic options and their limitations. We provide a comprehensive overview of chemical nanoformulations and explore physical strategies to improve delivery rates. Furthermore, we discuss the advantages of various formulations that can carry different types of payloads, offering patients diverse strategies for symptom management. The review covers conventional treatments, emphasizing advancements in nanoparticle design and novel macromolecular drugs. This includes Ribonucleic acid (RNA)-based therapies that protect macromolecular drugs from rapid clearance in the body.

EXPERT OPINION

We argue that intelligent design approaches can enhance efficacy across delivery applications while allowing for precision in treatment strategies, ultimately improving patient outcomes.

An update on nanocarriers for follicular-targeted drug delivery for androgenetic alopecia topical treatment

INTRODUCTION

Androgenic alopecia is a multifactorial disease with a high incidence and a great psychological burden on patients. The current FDA-approved treatment is topical minoxidil or oral finasteride. However, both present significant limitations. While the systemic absorption of finasteride causes serious sexual side effects, minoxidil's low solubility imposes a challenge in obtaining a non-irritative and effective formulation. One way to solve such limitations is by using nanocarriers targeting the drug delivery to the hair follicles upon topical application.

AREAS COVERED

Here, we review which advancements have been made to achieve a more effective treatment for androgenic alopecia, focusing on nanocarriers for the topical drug delivery systems developed to target hair follicles.

EXPERT OPINION

The results from multiple reviewed studies demonstrate the potential of incorporating drugs into different nanocarriers to improve follicular targeting in drug delivery for androgenic alopecia treatment. However, many studies fail to perform the proper controls. Most studies also do not quantify the drug accumulation in all skin layers, especially in hair follicles, which avoids comparisons between different nanocarriers and, hence, reliable conclusions. Future experiments with a broader nanocarrier size range, suitable skin models and controls, and clinical tests to assess the safety of developed formulations will improve the androgenic alopecia treatment.

Drug Repurposing and Nanotechnology for Topical Skin Cancer Treatment: Redirecting toward Targeted and Synergistic Antitumor Effects

Skin cancer represents a major health concern due to its rising incidence and limited treatment options. Current treatments (surgery, chemotherapy, radiotherapy, immunotherapy, and targeted therapy) often entail high costs, patient inconvenience, significant adverse effects, and limited therapeutic efficacy. The search for novel treatment options is also marked by the high capital investment and extensive development involved in the drug discovery process. In response to these challenges, repurposing existing drugs for topical application and optimizing their delivery through nanotechnology could be the answer. This innovative strategy aims to combine the advantages of the known pharmacological background of commonly used drugs to expedite therapeutic development, with nanosystem-based formulations, which among other advantages allow for improved skin permeation and retention and overall higher therapeutic efficacy and safety. The present review provides a critical analysis of repurposed drugs such as doxycycline, itraconazole, niclosamide, simvastatin, leflunomide, metformin, and celecoxib, formulated into different nanosystems, namely, nanoemulsions and nanoemulgels, nanodispersions, solid lipid nanoparticles, nanostructured lipid carriers, polymeric nanoparticles, hybrid lipid-polymer nanoparticles, hybrid electrospun nanofibrous scaffolds, liposomes and liposomal gels, ethosomes and ethosomal gels, and aspasomes, for improved outcomes in the battle against skin cancer. Enhanced antitumor effects on melanoma and nonmelanoma research models are highlighted, with some nanoparticles even showing intrinsic anticancer properties, leading to synergistic effects. The explored research findings highly evidence the potential of these approaches to complement the currently available therapeutic strategies in the hope that these treatments might one day reach the pharmaceutical market.

Mathematical modelling of hollow microneedle-mediated transdermal drug delivery

Hollow microneedles represent a promising approach for overcoming the protective barrier of the stratum corneum, facilitating direct drug infusion into viable skin tissue and thereby enhancing the efficacy of transdermal delivery. However, delivery outcomes across different skin layers and into the systemic circulation can vary substantially due to the diverse properties of drug delivery systems, clinical settings, and environmental factors. The optimal strategies for enhancing the efficiency of hollow microneedle-mediated transdermal drug delivery remain to be elucidated. This study employs mathematical modelling and a reconstructed skin model with realistic anatomical structures to investigate drug transport and accumulation across different skin layers and into the bloodstream under different delivery conditions. The modelling results reveal the crucial role of interstitial fluid flow in determining drug transport in this transdermal delivery. Delivery outcomes of each skin layer and blood exhibit distinct responses to changes in delivery conditions. Specifically, increasing the vascular permeability or nanocarrier diffusivity raises drug concentration in the blood or reticular dermis, respectively, while leading to reductions in other skin layers. The use of microneedles with narrower infusion channels can only enhance drug availability in the viable epidermis. Optimisation requires a tailored approach to several parameters depending on the target skin layer, including drug release rate, infusion rate, infusion duration, and microneedle length. Environmental factors that promote trans-epidermal water loss can increase drug concentration in the viable epidermis but have a limited impact on deeper skin tissues. The findings support the selection or customisation of hollow microneedles and nanocarriers to address specific therapeutic needs, such as targeting specific skin layers or systemic circulation, while minimising the risk of side effects from high drug concentrations in normal tissues. This study provides guidance for optimising transdermal drug delivery systems.

Fusidic Acid and Lidocaine-Loaded Electrospun Nanofibers as a Dressing for Accelerated Healing of Infected Wounds

Introduction

Wound treatment is a significant health burden in any healthcare system, which requires proper management to minimize pain and prevent bacterial infections that can complicate the wound healing process.

Rationale

There is a need to develop innovative therapies to accelerate wound healing cost-effectively. Herein, two polymer-based nanofibrous systems were developed using poly-lactic-co-glycolic-acid (PLGA) and polyvinylpyrrolidone (PVP) loaded with a combination of an antibiotic (Fusidic acid, FA) and a local anesthetic (Lidocaine, LDC) via electrospinning technique for an expedited healing process by preventing bacterial infections while reducing the pain sensation.

Results

The fabricated nanofibers showed an excellent morphology with an average fiber diameter of 556 ± 71 nm and 291 ± 87 nm for the dual drug-loaded PLGA/PVP and PVP nanofibers, respectively. The encapsulation efficiency (EE%) and drug loading (DL) studies revealed that PLGA/PVP loaded with FA and LDC exhibited EE% of 92% and 75%, respectively, while the DL was measured at 40 ± 8 µg/mg for FA and 32 ± 7 µg/mg for LDC. Furthermore, both drugs were fully released from the nanofibers within 48 hours. In contrast, FA/LDC-loaded PVP nanofibers exhibited EE% of 100% for FA and 84% for LDC; DL was measured at 85 ± 3 µg/mg for FA and 70 ± 3 µg/mg for LDC, while both drugs were completely released within 24 hours. The in vitro cytotoxicity study demonstrated a safe concentration of FA and LDC at ≤ 125 μg/mL. The prepared nanofibers were tested in vivo in an S. aureus-infected wound mice model to assess their efficacy, and the results showed that the FA/LDC-PVP had a faster wound closure and the lowest bacterial counts compared to other groups.

Conclusion

These findings showed the potential application of the fabricated dual drug-loaded nanofibers as a wound-healing plaster against infected acute wounds.

Effect of gelatin nanoparticles' size and charge on iontophoretic targeted deposition to the hair follicles

Hair follicles (HFs) represent a route of interest to drug delivery for treating several skin conditions. Iontophoresis, on the other hand, is a physical method to enhance drug permeation by applying a low electrical current to the formulation. HFs can be targeted following topical iontophoretic application, as they represent a pathway of lower electrical resistance, as well as a drug reservoir, in particular useful for nanoparticles (NPs), which can preferably accumulate in these structures. Combining both strategies may provide optimal results, but the literature still lacks evidence of the ideal NP characteristics for the iontophoretic drug delivery targeting the HFs. Here, we aimed to evaluate the effect of gelatin NPs' size and charge under iontophoresis application on NPs' deposition into the HFs. Four gelatin NP formulations were produced with varying gelatin concentrations and gelatin types (positively charged type A and negatively charged type B), with sizes ranging from 220 to 770 nm. A fluorescent dye, TRITC-dextran 150 kDa, was encapsulated for monitoring NPs deposition. Cutaneous penetration experiments were performed in vitro with and without iontophoresis for 6 h with pig ear skin. The deposition profile was assessed by confocal laser scanning microscopy. Photomicrographs showed a higher accumulation of the larger positively charged NPs (AL), reaching deeper portions of HFs, and showed iontophoresis further increased their deposition, resulting in the highest signal. In conclusion, these findings shed light on the applications of NPs and bring novel treatment opportunities for several diseases compromising the hair follicles.

Curcumin-based nanofibers: A promising approach for cancer therapy

Nanofibers are among the promising platforms for efficient delivery of drugs (both hydrophilic and hydrophobic) through harnessing polymers with different natures as their base. Hydrophobic low-solubility agents such as curcumin could be incorporated in various types of electrospun nanofibers for different aims in drug delivery, such as enhancing its solubility, making this agent sustained release with improved pharmacological efficacy. Through using this nanoplatform, curcumin may become more bioavailable and more efficcious in the field of cancer therapy as well as tissue engineering and wound healing for local delivery of this anti-inflammatory and antioxidant agent. In this review, the characteristics of curcumin-loaded nanofibers, their targeting potential or stimuli-responsiveness accompanied with therapeutic anti-cancerous applications of them (mostly in local application) are securitized. These nanofibers follow the aim of enhancing curcumin's therapeutic effectiveness and release profile. We laso elaborate on the mechanisms of action through which curcumin exerts its effect on various cancerous cells after its incorporation in various types of nanofibers which have been prepared by exploiting different polymers.

Exploring the Potential of Nonpsychoactive Cannabinoids in the Development of Materials for Biomedical and Sports Applications

This Perspective explores the potential of nonpsychoactive cannabinoids (NPCs) such as CBD, CBG, CBC, and CBN in developing innovative biomaterials for biomedical and sports applications. It examines their physicochemical properties, anti-inflammatory, analgesic, and neuroprotective effects, and their integration into various biomaterials such as hydrogels, sponges, films, and scaffolds. It also discusses the current challenges in standardizing formulations, understanding long-term effects, and understanding their intrinsical regulatory landscapes. Further, it discusses the promising applications of NPC-loaded materials in bone regeneration, wound management, and drug delivery systems, emphasizing their improved biocompatibility, mechanical properties, and therapeutic efficacy demonstrated in vitro and in vivo. The review also addresses innovative approaches to enhance NPC delivery including the use of computational tools and explores their potential in both biomedical and sports science contexts. By providing a comprehensive overview of the current state of research, this review aims to outline future directions, emphasizing the potential of NPCs in biomaterial science and regenerative medicine.

Nanocrystals in Dermal Drug Delivery: A Breakthrough for Enhanced Skin Penetration and Targeted Skin Disorder Treatments

One of the major challenges in dermal drug delivery is the adequate penetration of the active compound into the skin without causing any skin irritation and inflammation. Nanocrystals (NCs) are nanoscale particles, and their sizes are below 1000 nm. NCs are made up of drug particles only, which are used to improve the aqueous solubility and bioavailability of poorly water-soluble drugs. NCs are typically prepared either by bottom-up or top-down techniques. The advantages of using NC-based formulations in enhancing dermal drug delivery include increased drug loading capacity, easier and deeper penetration into the skin tissue, and increased passive diffusion. NC-based formulations with the capacity of enhanced dermal drug delivery can be effectively used to treat a wide range of skin disorders, including melanoma, inflammation, psoriasis, acne vulgaris, bacterial infections, fungal infections, eczema, skin aging, herpes simplex virus infections, skin manifestations of tick bites, frostbite-related infections, hyperpigmentation, and diabetic foot ulcer. In this review, major challenges in dermal drug delivery across the skin barrier, mechanism of action of dermal NCs, advantages of using NCs in enhancing dermal drug delivery, NC preparation methods, and applications of NCs in the treatment of various skin disorders have been discussed.

Ethosomes as a carrier for transdermal drug delivery system: methodology and recent developments

Transdermal drug delivery systems (TDDS) have received significant attention in recent years. TDDS are flexible systems that transport active components to the skin for either localized or systemic delivery of drugs through the skin. Among the three main layers of skin, the outermost layer, called the stratum corneum (SC), prevents the entry of water-loving bacteria and drugs with a high molecular weight. The challenge lies in successfully delivering drugs through the skin, which crosses the stratum corneum. The popularity of lipid-based vesicular delivery systems has increased in recent years due to their ability to deliver both hydrophilic and hydrophobic drugs. Ethosomes are specialized vesicles made of phospholipids that can store large amounts of ethanol. Ethosome structure and substance promote skin permeability and bioavailability. This article covers ethosome compositions, types, medication delivery techniques, stability, and safety. In addition to this, an in-depth analysis of the employment of ethosomes in drug delivery applications for a wide range of diseases has also been discussed. This review article highlights different aspects of ethosomes, such as their synthesis, characterization, marketed formulation, recent advancements in TDDS, and applications.

Advanced scattering techniques for characterisation of complex nanoparticles in solution

Nanoparticles are vital to a broad range of applications including commercial formulations, sensing and advanced material synthesis. Nanoparticles can come in a variety of shapes including cubes, polyhedra, rods, and prisms, and recent literature has demonstrated the importance of nanoparticle shape to downstream function (such as cellular uptake). While researchers routinely characterise nanoparticle shape using electron microscopy techniques, this generally requires drying of the samples. Many particles (e.g. lipid nanoparticles or polymer particles) change with drying, so complementary solution based techniques are needed. Scattering techniques can be used to characterise such nanoparticles in suspension, overcoming many of the limitations of other techniques. Here we review the current state of the art in the characterisation of complex nanoparticles (non-spherical and multi-layered) using advanced scattering techniques including light, X-ray, and neutron scattering. Recent improvements in instrument availability and data analysis makes these techniques much more accessible to researchers. This review provides an introduction to these techniques aimed at all researchers working with nanoparticles, in the hope that full characterisation of nanoparticles in solution becomes standard practice.

Quality by design optimization of formulation variables and process parameters for enhanced transdermal delivery of nanosuspension

This investigation aims to fabricate, characterize, and optimize organogel containing andrographolide nanosuspension to enhance transdermal drug delivery into and across the skin in vitro. We identified the critical material attributes (CMAs) and critical process parameters (CPPs) that impact key characteristics of andrographolide nanosuspension using a systematic quality-by-design approach. We prepared andrographolide nanosuspension using the wet milling technique and evaluated various properties of the formulations. The CMAs were types and concentrations of polymers, types and concentrations of surfactants, drug concentration, and lipid concentration. The CPPs were volume of milling media and milling duration. Mean particle size, polydispersity index, encapsulation efficiency, and drug loading capacity as critical quality attributes were selected in the design for the evaluation and optimization of the formulations. Furthermore, we developed and evaluated organogel formulation to carry andrographolide nanosuspension 0.05% w/w. Drug release and permeation studies were conducted to assess the drug release kinetics and transdermal delivery of andrographolide. We presented the alteration in the average particle size, polydispersity index, encapsulation efficiency, drug-loading capacity, and drug release among various formulations to select the optimal parameters. The permeation study indicated that organogel delivered markedly more drug into the receptor fluid and skin tissue than DMSO gel (n = 3, p < 0.05). This enhancement in transdermal drug delivery was demonstrated by cumulative drug permeation after 24 h, steady-state flux, permeability coefficient, and predicted steady-state plasma concentration. Drug quantity in skin layers, total delivery, delivery efficiency, and topical selectivity were also reported. Conclusively, andrographolide nanosuspension-loaded organogel significantly increased transdermal drug delivery in vitro.

The Design Features, Quality by Design Approach, Characterization, Therapeutic Applications, and Clinical Considerations of Transdermal Drug Delivery Systems-A Comprehensive Review

Transdermal drug delivery systems (TDDSs) are designed to administer a consistent and effective dose of an active pharmaceutical ingredient (API) through the patient's skin. These pharmaceutical preparations are self-contained, discrete dosage forms designed to be placed topically on intact skin to release the active component at a controlled rate by penetrating the skin barriers. The API provides the continuous and prolonged administration of a substance at a consistent rate. TDDSs, or transdermal drug delivery systems, have gained significant attention as a non-invasive method of administering APIs to vulnerable patient populations, such as pediatric and geriatric patients. This approach is considered easy to administer and helps overcome the bioavailability issues associated with conventional drug delivery, which can be hindered by poor absorption and metabolism. A TDDS has various advantages compared to conventional methods of drug administration. It is less intrusive, more patient-friendly, and can circumvent first pass metabolism, as well as the corrosive acidic environment of the stomach, that happens when drugs are taken orally. Various approaches have been developed to enhance the transdermal permeability of different medicinal compounds. Recent improvements in TDDSs have enabled the accurate administration of APIs to their target sites by enhancing their penetration through the stratum corneum (SC), hence boosting the bioavailability of drugs throughout the body. Popular physical penetration augmentation methods covered in this review article include thermophoresis, iontophoresis, magnetophoresis, sonophoresis, needle-free injections, and microneedles. This review seeks to provide a concise overview of several methods employed in the production of TDDSs, as well as their evaluation, therapeutic uses, clinical considerations, and the current advancements intended to enhance the transdermal administration of drugs. These advancements have resulted in the development of intelligent, biodegradable, and highly efficient TDDSs.

Advanced alginate-based nanofiber aerogels: A synthetic matrix for high-efficiency lysozyme adsorption and controlled release

The development of materials with high lysozyme adsorption is critical for drug delivery and skin wound applications, as it enhances antibacterial properties, stability, and controlled release of therapeutic agents, thereby improving treatment efficacy and safety. Alginate-based nanofiber scaffolds, featuring high surface area and multiple adsorption sites, can efficiently absorb lysozyme and regulate its release through tunable pore channels, offering a promising approach to chronic wound management. In this study, we fabricated poly (vinyl alcohol-co-ethylene) (EVOH) nanofiber-based sodium alginate (ENSA) aerogels using a simple two-step crosslinking procedure. The resulting aerogels, with controllable porosity formed via high-pressure spraying techniques (aerogel film) and molding (aerogel sponge), were evaluated for their high-loading capacity and controllable release of lysozyme. The aerogel film exhibited a remarkable lysozyme adsorption capacity of 1965 ± 36 mg/g, while the aerogel sponge sustained lysozyme release over 14 days. Analysis of the drug-release mechanism through four kinetic models revealed two distinct processes: cation exchange and matrix diffusion. The aerogel's pore structure influenced the diffusion processes, enabling tailored drug release profiles. Additionally, the ENSA aerogels demonstrated good mechanical properties, non-cytotoxicity, and potent antibacterial activity, positioning them as promising materials for skin wound dressings.

Emerging Trends in Dissolving-Microneedle Technology for Antimicrobial Skin-Infection Therapies

Skin and soft-tissue infections require significant consideration because of their prolonged treatment duration and propensity to rapidly progress, resulting in severe complications. The primary challenge in their treatment stems from the involvement of drug-resistant microorganisms that can form impermeable biofilms, as well as the possibility of infection extending deep into tissues, thereby complicating drug delivery. Dissolving microneedle patches are an innovative transdermal drug-delivery system that effectively enhances drug penetration through the stratum corneum barrier, thereby increasing drug concentration at the site of infection. They offer highly efficient, safe, and patient-friendly alternatives to conventional topical formulations. This comprehensive review focuses on recent advances and emerging trends in dissolving-microneedle technology for antimicrobial skin-infection therapy. Conventional antibiotic microneedles are compared with those based on emerging antimicrobial agents, such as quorum-sensing inhibitors, antimicrobial peptides, and antimicrobial-matrix materials. The review also highlights the potential of innovative microneedles incorporating chemodynamic, nanoenzyme antimicrobial, photodynamic, and photothermal antibacterial therapies. This review explores the advantages of various antimicrobial therapies and emphasizes the potential of their combined application to improve the efficacy of microneedles. Finally, this review analyzes the druggability of different antimicrobial microneedles and discusses possible future developments.

Coaxial nanofibrous aerogel featuring porous network-structured channels for ovarian cancer treatment by sustained release of chitosan oligosaccharide

Ovarian cancer, the deadliest gynecological malignancy, primarily treated with chemotherapy. However, systemic chemotherapy often leads to severe toxic side effects and chemoresistance. Drug-loaded aerogels have emerged as a promising method for drug delivery, as they can improve drug solubility and bioavailability, control drug release, and reduce drug distribution in non-targeted tissues, thereby minimizing side effects. In this research, chitosan oligosaccharide (COS)-loaded nanofibers composite chitosan (CS) aerogels (COS-NFs/CS) with a porous network structure were created using nanofiber recombination and freeze-drying techniques. The core layer of the aerogel has a COS loading rate of 60 %, enabling the COS-NFs/CS aerogel to significantly inhibit the migration and proliferation of ovarian cancer cells (resulting in a decrease in the survival rate of ovarian cancer cells to 33.70 % after 48 h). The coaxial fiber's unique shell-core structure and the aerogel's porous network structure enable the COS-NFs/CS aerogels to release COS steadily and slowly over 30 days, effectively reducing the initial burst release of COS. Additionally, the COS-NFs/CS aerogels exhibit good biocompatibility, degradability (only retaining 18.52 % of their weight after 6 weeks of implantation), and promote angiogenesis, thus promoting wound healing post-oophorectomy. In conclusion, COS-NFs/CS aerogels show great potential for application in the treatment of ovarian cancer.

Maximizing arsenic trioxide's anticancer potential: Targeted nanocarriers for solid tumor therapy

Arsenic trioxide (ATO) has gained significant attention due to its promising therapeutic effects in treating different diseases, particularly acute promyelocytic leukemia (APL). Its potent anticancer mechanisms have been extensively studied. Despite the great efficacy ATO shows in fighting cancers, drawbacks in the clinical use are obvious, especially for solid tumors, which include rapid renal clearance and short half-life, severe adverse effects, and high toxicity to normal cells. Recently, the emergence of nanomedicine offers a potential solution to these limitations. The enhanced biocompatibility, excellent targeting capability, and desirable effectiveness have attracted much interest. Therefore, we summarized various nanocarriers for targeted delivery of ATO to solid tumors. We also provided detailed anticancer mechanisms of ATO in treating cancers, its clinical trials and shortcomings as well as the combination therapy of ATO and other chemotherapeutic agents for reduced drug resistance and synergistic effects. Finally, the future study direction and prospects were also presented.

Advances in nucleic acid delivery strategies for diabetic wound therapy

In recent years, the prevalence of diabetic wounds has significantly increased, posing a substantial medical challenge due to their propensity for infection and delayed healing. These wounds not only increase mortality rates but also lead to amputations and severe mobility issues. To address this, advancements in bioactive molecules such as genes, growth factors, proteins, peptides, stem cells, and exosomes into targeted gene therapies have emerged as a preferred strategy among researchers. Additionally, the integration of photothermal therapy (PTT), nucleic acid, and gene therapy, along with 3D printing technology and the layer-by-layer (LBL) self-assembly approach, shows promise in diabetic wound treatment. Effective delivery of small interfering RNA (siRNA) relies on gene vectors. This review provides an in-depth exploration of the pathophysiological characteristics observed in diabetic wounds, encompassing diminished angiogenesis, heightened levels of reactive oxygen species, and impaired immune function. It further examines advancements in nucleic acid delivery, targeted gene therapy, advanced drug delivery systems, layer-by-layer (LBL) techniques, negative pressure wound therapy (NPWT), 3D printing, hyperbaric oxygen therapy, and ongoing clinical trials. Through the integration of recent research insights, this review presents innovative strategies aimed at augmenting the multifaceted management of diabetic wounds, thus paving the way for enhanced therapeutic outcomes in the future.

Recent Advancements and Trends of Topical Drug Delivery Systems in Psoriasis: A Review and Bibliometric Analysis

Psoriasis is an immune-mediated inflammatory skin disease where topical therapy is crucial. While various dosage forms have enhanced the efficacy of current treatments, their limited permeability and lack of targeted delivery to the dermis and epidermis remain challenges. We reviewed the evolution of topical therapies for psoriasis and conducted a bibliometric analysis from 1993 to 2023 using a predictive linear regression model. This included a comprehensive statistical and visual evaluation of each model's validity, literature profiles, citation patterns, and collaborations, assessing R variance and mean squared error (MSE). Furthermore, we detailed the structural features and penetration pathways of emerging drug delivery systems for topical treatment, such as lipid-based, polymer-based, metallic nanocarriers, and nanocrystals, highlighting their advantages. This systematic overview indicates that future research should focus on developing novel drug delivery systems characterized by enhanced stability, biocompatibility, and drug-carrying capacity.

Fabrication and evaluation of a bi-layered electrospun PCL/PVA patch for wound healing: Release of vitamins and silver nanoparticle

There is still little research on the co-delivery of vitamins and AgNPs to accelerate wound healing. In this study, a bi-layered electrospun PCL/PVA patch loaded with Vitamin C, Vitamin B12, and AgNPs was fabricated using a co-spinning technique. SEM, FTIR, degradation, swelling, tensile strength, disk diffusion, and MTT assay were studied. Nine rats were placed in three groups (control: no treatment, G1: without agents, and G2: with agents) for 14 days in an in-vivo study. H&E and Masson Trichrome staining were employed for histological analysis. Results showed that the final electrospun wound dressings depicted nanofibers with diameters ranging from 100 to 500 nm. The presence of AgNP enhanced the mechanical strength (40-50 MPs). An appropriate swelling (100 %) and degradation (50 %) rate was observed for groups with no significant difference (P > 0.05). G1 and G2 did not show a significant difference in terms of porosity (65 % vs. 69 %). Regarding WVTR, G2 demonstrated higher WVTR (88 vs. 95 g/m2. h). G2 showed a vitamin release of more than 90 % after 48 h. Compared to G1, G2 demonstrated good antibacterial activity (>3 cm) against E. Coli and S. aureous (P < 0.01), with cell viability of more than 93 % (P > 0.05). Furthermore, the in-vivo study approved that G2 accelerated wound healing in full-thickness wounds, compared to the control groups, with notable wound size reduction (8 mm), epithelialization, and collagen formation. The findings support the use of this simple but potent electrospun wound dressing for the healing of full-thickness wounds.

Dual Drug-Loaded Coaxial Nanofiber Dressings for the Treatment of Diabetic Foot Ulcer

Introduction

Diabetes mellitus is frequently associated with foot ulcers, which pose significant health risks and complications. Impaired wound healing in diabetic patients is attributed to multiple factors, including hyperglycemia, neuropathy, chronic inflammation, oxidative damage, and decreased vascularization.

Rationale

To address these challenges, this project aims to develop bioactive, fast-dissolving nanofiber dressings composed of polyvinylpyrrolidone loaded with a combination of an antibiotic (moxifloxacin or fusidic acid) and anti-inflammatory drug (pirfenidone) using electrospinning technique to prevent the bacterial growth, reduce inflammation, and expedite wound healing in diabetic wounds.

Results

The fabricated drug-loaded fibers exhibited diameters of 443 ± 67 nm for moxifloxacin/pirfenidone nanofibers and 488 ± 92 nm for fusidic acid/pirfenidone nanofibers. The encapsulation efficiency, drug loading and drug release studies for the moxifloxacin/pirfenidone nanofibers were found to be 70 ± 3% and 20 ± 1 µg/mg, respectively, for moxifloxacin, and 96 ± 6% and 28 ± 2 µg/mg, respectively, for pirfenidone, with a complete release of both drugs within 24 hours, whereas the fusidic acid/pirfenidone nanofibers were found to be 95 ± 6% and 28 ± 2 µg/mg, respectively, for fusidic acid and 102 ± 5% and 30 ± 2 µg/mg, respectively, for pirfenidone, with a release rate of 66% for fusidic acid and 80%, for pirfenidone after 24 hours. The efficacy of the prepared nanofiber formulations in accelerating wound healing was evaluated using an induced diabetic rat model. All tested formulations showed an earlier complete closure of the wound compared to the controls, which was also supported by the histopathological assessment. Notably, the combination of fusidic acid and pirfenidone nanofibers demonstrated wound healing acceleration on day 8, earlier than all tested groups.

Conclusion

These findings highlight the potential of the drug-loaded nanofibrous system as a promising medicated wound dressing for diabetic foot applications.

Clinical perspective on topical vaccination strategies

Vaccination is one of the most successful measures in modern medicine to combat diseases, especially infectious diseases, and saves millions of lives every year. Vaccine design and development remains critical and involves many aspects, including the choice of platform, antigen, adjuvant, and route of administration. Topical vaccination, defined herein as the introduction of a vaccine to any of the three layers of the human skin, has attracted interest in recent years as an alternative vaccination approach to the conventional intramuscular administration because of its potential to be needle-free and induce a superior immune response against pathogens. In this review, we describe recent progress in developing topical vaccines, highlight progress in the development of delivery technologies for topical vaccines, discuss potential factors that might impact the topical vaccine efficacy, and provide an overview of the current clinical landscape of topical vaccines.

Membranes composed of poly(lactic acid)/poly(ethylene glycol) and Ora-pro-nóbis (Pereskia aculeata Miller) extract for dressing applications

Wounds are considered one of the most critical medical conditions that must be managed appropriately due to the psychological and physical stress they cause for patients, as well as creating a substantial financial burden on patients and global healthcare systems. Nowadays, there is a growing interest in developing nanofiber mats loaded with varying plant extracts to meet the urgent need for advanced wound ressings. This study investigated the development and characterization of poly(lactic acid) (PLA)/ poly(ethylene glycol) (PEG) nanofiber membranes incorporated with Ora-pro-nóbis (OPN; 12.5, 25, and 50 % w/w) by the solution-blow-spinning (SBS) technique. The PLA/PEG and PLA/PEG/OPN nanofiber membranes were characterized by scanning electron microscopy (SEM), thermal properties (TGA and DSC), Fourier transform infrared spectroscopy (FTIR), contact angle measurements and water vapor permeability (WVTR). In addition, the mats were analyzed for swelling properties in vitro cell viability, and fibroblast adhesion (L-929) tests. SEM images showed that smooth and continuous PLA/PEG and PLA/PEG/OPN nanofibers were obtained with a diameter distribution ranging from 171 to 1533 nm. The PLA/PEG and PLA/PEG/OPN nanofiber membranes showed moderate hydrophobicity (~109-120°), possibly preventing secondary injuries during dressing removal. Besides that, PLA/PEG/OPN nanofibers exhibited adequate WVTR, meeting wound healing requirements. Notably, the presence of OPN gave the PLA/PEG membranes better mechanical properties, increasing their tensile strength (TS) from 3.4 MPa (PLA/PEG) to 5.3 MPa (PLA/PEG/OPN), as well as excellent antioxidant properties (Antioxidant activity with approximately 45 % oxidation inhibition). Therefore, the nanofiber mats based on PLA/PEG, especially those incorporated with OPN, are promising options for use as antioxidant dressings to aid skin healing.

Kinetic assessment of iontophoretic delivery efficiency of niosomal tetracycline hydrochloride incorporated in electroconductive gel

The purpose of this study was to conduct the kinetic assessment of iontophoretic delivery of niosomal tetracycline-HCl formulated in an electroconductive gel. Tween-80 and Span-80 were used to obtain tetracycline-HCl niosomes with an average diameter of 101.9 ± 3.3 nm, a polydispersity index of 0.247 ± 0.004, a zeta potential of - 34.1 mV, and an entrapment efficiency of 70.08 ± 0.16%. Four different gel preparations, two of which contained niosomal tetracycline-HCl, were transdermally delivered using Franz diffusion cells under the trigger effect of iontophoresis, applied at 0.2, 0.5, and 1 mA/cm2 current density. The control group was the passive diffusion results of the preparation made using a tetracycline-HCl-based drug marketed in Turkey. The control group was compared with the groups that contained (a) tetracycline-HCl in an electroconductive gel, (b) the niosomal tetracycline-HCl formulation in water, and (c) the niosomal tetracycline-HCl formulation in the electroconductive gel. The group with the niosomal formulation in the electroconductive gel displayed the highest increase in iontophoretic transdermal delivery relative to the control group, displaying a 2-, 2.1-, and 2.2-fold increase, respectively, by current density. The experimental results of transdermal delivery using the synergistic effect of niosomal formulation in electroconductive gel and the trigger effect of iontophoresis appeared to divert slightly from zero-order kinetics, demonstrating a statistically significant increase in the rate of controlled transdermal drug delivery. Considering that about 20% of the formulation is transdermally delivered in the first half-hour, the iontophoretic transdermal delivery of niosomal tetracycline-HCl can be efficiently used in local iontophoretic therapy.

Synergistic applications of cyclodextrin-based systems and metal-organic frameworks in transdermal drug delivery for skin cancer therapy

This review article explores the innovative field of eco-friendly cyclodextrin-based coordination polymers and metal-organic frameworks (MOFs) for transdermal drug delivery in the case of skin cancer therapy. We critically examine the significant advancements in developing these nanocarriers, with a focus on their unique properties such as biocompatibility, targeted drug release, and enhanced skin permeability. These attributes are instrumental in addressing the limitations inherent in traditional skin cancer treatments and represent a paradigm shift towards more effective and patient-friendly therapeutic approaches. Furthermore, we discuss the challenges faced in optimizing the synthesis process for large-scale production while ensuring environmental sustainability. The review also emphasizes the immense potential for clinical applications of these nanocarriers in skin cancer therapy, highlighting their role in facilitating targeted, controlled drug release which minimizes systemic side effects. Future clinical applications could see these nanocarriers being customized to individual patient profiles, potentially revolutionizing personalized medicine in oncology. With further research and clinical trials, these nanocarriers hold the promise of transforming the landscape of skin cancer treatment. With this study, we aim to provide a comprehensive overview of the current state of research in this field and outline future directions for advancing the development and clinical application of these innovative nanocarriers.

Secondary metabolites in topical infectious diseases and nanomedicine applications

Topical infection affects nearly one-third of the world's population; it may result from poor sanitation, hygienic conditions and crowded living and working conditions that accelerate the spread of topical infectious diseases. The problems associated with the anti-infective agents are drug resistance and long-term therapy. Secondary metabolites are obtained from plants, microorganisms and animals, but they are metabolized inside the human body. The integration of nanotechnology into secondary metabolites is gaining attention due to their interaction at the subatomic and skin-tissue levels. Hydrogel, liposomes, lipidic nanoparticles, polymeric nanoparticles and metallic nanoparticles are the most suitable carriers for secondary metabolite delivery. Therefore, the present review article extensively discusses the topical applications of nanomedicines for the effective delivery of secondary metabolites.

Optimized mucoadhesive niosomal carriers for intranasal delivery of carvedilol: A quality by design approach

Carvedilol (CV), a β-blocker essential for treating cardiovascular diseases, faces bioavailability challenges due to poor water solubility and first-pass metabolism. This study developed and optimized chitosan (CS)-coated niosomes loaded with CV (CS/CV-NS) for intranasal (IN) delivery, aiming to enhance systemic bioavailability. Utilizing a Quality-by-Design (QbD) approach, the study investigated the effects of formulation variables, such as surfactant type, surfactant-to-cholesterol (CHOL) ratio, and CS concentration, on CS/CV-NS properties. The focus was to optimize specific characteristics including particle size (PS), polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE%), and mucin binding efficiency (MBE%). The optimal formulation (Opt CS/CV-NS), achieved with a surfactant: CHOL ratio of 0.918 and a CS concentration of 0.062 g/100 mL, using Span 60 as the surfactant, exhibited a PS of 305 nm, PDI of 0.36, ZP of + 33 mV, EE% of 63 %, and MBE% of 57 %. Opt CS/CV-NS was characterized for its morphological and physicochemical properties, evaluated for stability under different storage conditions, and assessed for in vitro drug release profile. Opt CS/CV-NS demonstrated a 1.7-fold and 4.8-fold increase in in vitro CV release after 24 h, compared to uncoated CV-loaded niosomes (Opt CV-NS) and free CV, respectively. In vivo pharmacokinetic (PK) study, using a rat model, demonstrated that Opt CS/CV-NS achieved faster Tmax and higher Cmax compared to free CV suspension indicating enhanced absorption rate. Additionally, Opt CV-NS showed a 1.68-fold higher bioavailability compared to the control. These results underscore the potential of niosomal formulations in enhancing IN delivery of CV, offering an effective strategy for improving drug bioavailability and therapeutic efficacy.

Sublingual Administration of Teucrium Polium-Loaded Nanofibers with Ultra-Fast Release in the Treatment of Diabetes Mellitus: In Vitro and In Vivo Evaluation

In this study, Teucrium polium (TP) methanolic extract, which has antidiabetic activity and protects the β-cells of the pancreas, was loaded in polyethylene oxide/sodium alginate nanofibers by electrospinning and administered sublingually to evaluate their effectiveness in type-2 diabetes mellitus (T2DM) by cell culture and in vivo studies. The gene expressions of insulin, glucokinase, GLUT-1, and GLUT-2 improved in TP-loaded nanofibers (TPF) on human beta cells 1.1B4 and rat beta cells BRIN-BD11. Fast-dissolving (<120 s) sublingual TPF exhibited better sustainable anti-diabetic activity than the suspension form, even in the twenty times lower dosage in streptozotocin/nicotinamide-induced T2DM rats. The levels of GLP-1, GLUT-2, SGLT-2, PPAR-γ, insulin, and tumor necrosis factor-alpha were improved. TP and TPF treatments ameliorated morphological changes in the liver, pancreas, and kidney. The fiber diameter increased, tensile strength decreased, and the working temperature range enlarged by loading TP in fibers. Thus, TPF has proven to be a novel supportive treatment approach for T2DM with the features of being non-toxic, easy to use, and effective.

The study of wound healing activity of Thespesia populnea L. bark, an approach for accelerating healing through nanoparticles and isolation of main active constituents

The present study provides an evaluation for the wound healing activity of the ethanolic extract of Thespesia populnea L. bark (EBE) and its successive fractions in two doses level (1&2%), designed for determining the most bioactive fraction and the suitable dose. Furthermore, development of the most convenient formulation for these bioactive fractions through either their direct incorporation into hydrogel formulations or incorporation of chitosan-loaded nanoparticles with these bioactive fractions into hydrogel formulations. The highest excision wound healing activity was observed in petroleum ether (Pet-B) followed by ethyl acetate (Etac-B) fractions at the high dose (2%). The most suitable formulation designed for the Etac-B fraction was found to be the chitosan-loaded nanoparticles incorporated in the hydrogel formulation, while the conventional hydrogel formulation was observed to be the highly acceptable formulation for Pet-B fraction. Further phytochemical studies of the bioactive fractions led to the isolation of many compounds of different chemical classes viz; beta-sitosterol and lupeol acetate isolated from the Pet-B, in addition to cyanidin and delphinidin from the Etac-B. Our results revealed that EBE and its bioactive fractions (Pet-B & Etac-B) could be considered as strong wound healers through their anti-oxidant and anti-inflammatory activities, in addition to stimulating collagen synthesis.

Formulation of Budesonide-Loaded Polymeric Nanoparticles into Hydrogels for Local Therapy of Atopic Dermatitis

Budesonide is a mineral corticoid applied in the local therapy of pediatric atopic dermatitis. Unfortunately, its dermal administration is hindered by the concomitant adverse effects and its physicochemical properties. The characteristic pH change in the atopic lesions can be utilized for the preparation of a pH-sensitive nanocarrier. In this view, the formulation of Eudragit L 100 nanoparticles as a budesonide delivery platform could provide more efficient release to the desired site, improve its penetration, and subsequently lower the undesired effects. In this study, budesonide-loaded Eudragit L100 nanoparticles were prepared via the nanoprecipitation method (mean diameter 57 nm, -31.2 mV, and approx. 90% encapsulation efficiency). Their safety was proven by cytotoxicity assays on the HaCaT keratinocyte cell line. Further, the drug-loaded nanoparticles were incorporated into two types of hydrogels based on methylcellulose or Pluronic F127. The formulated hydrogels were characterized with respect to their pH, occlusion, rheology, penetration, spreadability, and drug release. In conclusion, the developed hydrogels containing budesonide-loaded nanoparticles showed promising potential for the pediatric treatment of atopic dermatitis.

COX-2 inhibitor delivery system aiming intestinal inflammatory disorders

Selective COX-2 inhibitors such as etoricoxib (ETX) are potentially indicated for the treatment of intestinal inflammatory disorders. However, their systemic administration provokes some off-site secondary effects, decreasing the desirable local effectiveness. To circumvent such limitations, herein an ETX delivery system based on electrospun fibrous meshes (eFMs) was proposed. ETX at different concentrations (1, 2, and 3 mg mL-1) was loaded into eFMs, which not affect the morphology and the mechanical properties of this drug delivery system (DDS). The ETX showed a burst release within the first 12 h, followed by a faster release until 36 h, gradually decreasing over time. Importantly, the ETX studied concentrations were not toxic to human colonic cells (i.e. epithelial and fibroblast). Moreover, the DDS loading the highest concentration of ETX, when tested with stimulated human macrophages, promoted a reduction of PGE2, IL-8 and TNF-α secretion. Therefore, the proposed DDS may constitute a safe and efficient treatment of colorectal diseases promoted by inflammatory disorders associated with COX-2.

Recent advances in delivery of transdermal nutrients: A review

Nutrients provide vital functions in the body for sustained health, which have been shown to be related to the incidence, prevention and treatment of disease. However, limited bioavailability, loss of targeting specificity and the increased hepatic metabolism limit the utilization of nutrients. In this review, we highlight transdermal absorption of nutrients, which represents an opportunity to allow great use of many nutrients with promising human health benefits. Moreover, we describe how the various types of permeation enhancers are increasingly exploited for transdermal nutrient delivery. Chemical penetration enhancers, carrier systems and physical techniques for transdermal nutrient delivery are described, with a focus on combinatorial approaches. Although there are many carrier systems and physical techniques currently in development, with some tools currently in advanced clinical trials, relatively few products have achieved full translation to clinical practice. Challenges and further developments of these tools are discussed here in this review. This review will be useful to researchers interested in transdermal applications of permeation enhancers for the efficient delivery of nutrients, providing a reference for supporting the need to take more account of specific nutritional needs in specific states.

Classification and design strategies of polysaccharide-based nano-nutrient delivery systems for enhanced bioactivity and targeted delivery: A review

Since many nutrients are highly sensitive, they cannot be absorbed and utilized efficiently by the body. Using nano-delivery systems to encapsulate nutrients is an effective method of solving the problems associated with the application of nutrients at this stage. Polysaccharides, as natural biomaterials, have a unique chemical structure, ideal biocompatibility, biodegradability and low immunogenicity. This makes polysaccharides powerful carriers that can enhance the biological activity of nutrients. However, the true role of polysaccharide-based delivery systems requires an in-depth understanding of the structural and physicochemical characteristics of polysaccharide-based nanodelivery systems, as well as effective modulation of the intestinal delivery mechanism and the latest advances in nano-encapsulation. This review provides an overview of polysaccharide-based nano-delivery systems dependent on different carrier types, emphasizing recent advances in the application of polysaccharides, a biocomposite material designed for nutrient delivery systems. Strategies for polysaccharide-based nano-delivery systems to enhance the bioavailability of orally administered nutrients from the perspective of the intestinal absorption barrier are presented. Characterization methods for polysaccharide-based nano-delivery systems are presented as well as an explanation of the formation mechanisms behind nano-delivery systems from the perspective of molecular forces. Finally, we discussed the challenges currently facing polysaccharide-based nano-delivery systems as well as possible future directions for the future.

Nanotechnology-based Drug Delivery of Topical Antifungal Agents

Among the various prominent fungal infections, superficial ones are widespread. A large number of antifungal agents and their formulations for topical use are commercially available. They have some pharmacokinetic limitations which cannot be retracted by conventional delivery systems. While nanoformulations composed of lipidic and polymeric nanoparticles have the potential to overcome the limitations of conventional systems. The broad spectrum category of antifungals i.e. azoles (ketoconazole, voriconazole, econazole, miconazole, etc.) nanoparticles have been designed, prepared and their pharmacokinetic and pharmacodynamic profile was established. This review briefly elaborates on the types of nano-based topical drug delivery systems and portrays their advantages for researchers in the related field to benefit the available antifungal therapeutics.

Tiny titans- unravelling the potential of polysaccharides and proteins based dissolving microneedles in drug delivery and theranostics: A comprehensive review

In recent years, microneedles (MNs) have emerged as a promising alternative to traditional drug delivery systems in transdermal drug delivery. The use of MNs has demonstrated significant potential in improving patient acceptance and convenience while avoiding the invasiveness of traditional injections. Dissolving, solid, hollow, coated, and hydrogel microneedles are among the various types studied for drug delivery. Dissolving microneedles (DMNs), in particular, have gained attention for their safety, painlessness, patient convenience, and high delivery efficiency. This comprehensive review primarily focuses on different types of microneedles, fabrication methods, and materials used in fabrication of DMNs such as hyaluronic acid, chitosan, alginate, gelatin, collagen, silk fibroin, albumin, cellulose and starch, to list a few. The review also provides an exhaustive discussion on the applications of DMNs, including the delivery of vaccines, cosmetic agents, contraceptives, hormone and genes, and other therapeutic applications like for treating cancer, skin diseases, and diabetes, among others, are covered in this review. Additionally, this review highlights some of the DMN systems that are presently undergoing clinical trials. Finally, the review discusses current advances and trends in DMNs, as well as future prospective directions for this ground-breaking technology in drug delivery.

Mupirocin loaded core-shell pluronic-pectin-keratin nanofibers improve human keratinocytes behavior, angiogenic activity and wound healing

In the current study, a core-shell nanofibrous wound dressing based on Pluronic-F127 (F127) containing 2 wt% mupirocin (Mup) core and pectin (Pec)-keratin (Kr) shell was fabricated through coaxial electrospinning technique, and the blended nanofibers were also fabricated from the same materials. The fiber diameter and specific surface area of the blended nanofibers were about 101.56 nm and 20.16 m2/g, while for core-shell nanofibers they were about 97.32 nm and 25.26 m2/g, respectively. The resultant blended and core-shell nanofibers experienced a degradation of 27.65 % and 32.28 % during 7 days, respectively. The drug release profile of core-shell nanofibers revealed a sustained release of Mup over 7 days (87.66 %), while the blended F127-Pec-Kr-Mup nanofibers had a burst release within the first few hours (89.38 % up to 48 h) and a cumulative release of 91.36 % after 7 days. Due to the controlled release of Mup, the core-shell structure significantly improved the human keratinocytes behavior, angiogenic potential and wound healing in a rat model compared to the blended structure. In conclusion, the F127-Mup/Pec-Kr core-shell nanofibrous wound dressing appears to be a promising candidate for the prevention of infection, and can potentially accelerate the recovery and healing of chronic and ischemic wounds.

Study the Effect of Calendula officinalis Extract Loaded on Zinc Oxide Nanoparticle Cream in Burn Wound Healing

The skin, the body's largest organ, acts as a protective barrier against pathogens and environmental damage. Skin burns can result from heat, chemicals, friction, or electricity. Nanoscience has recently been utilized to create ointments and creams for burns. Zinc oxide nanoparticles are crucial due to their antimicrobial and antioxidant properties. In this study, a cream containing nanoparticles was loaded with calendula extract, and its ability to promote tissue healing was investigated in Wistar rats with skin burns. The zinc oxide nanoparticles were chemically synthesized and loaded with calendula extract. The morphology and physicochemical properties of the nanoparticles were confirmed by SEM, ZETA size, XRD, and FTIR assays. The MTT technique was employed to assess the cream's impact on fibroblast growth. The antimicrobial activity of the nanoparticles was investigated against Pseudomonas using the MIC method. Real-time PCR was used to determine the expression of the Bax and Bcl-2 genes in aeruginosa. The results showed that zinc oxide nanoparticles at high concentrations increased the proliferation of the fibroblast cells. Histopathological studies showed granulation and epithelialization of the tissue without any hemorrhage or tissue infection during the first days of treatment with this cream. The animal models treated with the cream showed an increase in Bcl-2 gene expression and a decrease in Bax expression. We concluded that zinc oxide nanoparticles loaded with calendula extract have a practical effect in healing burn wounds due to their unique antibacterial properties of zinc oxide nanoparticles and their anti-inflammatory and wound-healing effects. The synergistic effect of these two substances significantly improved the healing process. This newly developed cream can be introduced as a successful and viable treatment option in burn wounds.

CRISPR-Cas9-based non-viral gene editing therapy for topical treatment of recessive dystrophic epidermolysis bullosa

Recessive dystrophic epidermolysis bullosa (RDEB) is an autosomal monogenic skin disease caused by mutations in COL7A1 gene and lack of functional type VII collagen (C7). Currently, there is no cure for RDEB, and most of the gene therapies under development have been designed as ex vivo strategies because of the shortage of efficient and safe carriers for gene delivery. Herein, we designed, synthesized, and screened a new group of highly branched poly(β amino ester)s (HPAEs) as non-viral carriers for the delivery of plasmids encoding dual single-guide RNA (sgRNA)-guided CRISPR-Cas9 machinery to delete COL7A1 exon 80 containing the c.6527dupC mutation. The selected HPAEs (named PTTA-DATOD) showed robust transfection efficiency, comparable with or surpassing that of leading commercial gene transfection reagents such as Lipofectamine 3000, Xfect, and jetPEI, while maintaining negligible cytotoxicity. Furthermore, CRISPR-Cas9 plasmids delivered by PTTA-DATOD achieved efficient targeted deletion and restored bulk C7 production in RDEB patient keratinocyte polyclones. The non-viral CRISPR-Cas9-based COL7A1 exon deletion approach developed here has great potential to be used as a topical treatment for RDEB patients with mutations in COL7A1 exon 80. Besides, this therapeutic strategy can easily be adapted for mutations in other COL7A1 exons, other epidermolysis bullosa subtypes, and other genetic diseases.

A novel observation: effect of anionic gelatin nanoparticle on stromal cells

Biocompatible nanoparticles are very popular in health science research. Biomolecule carriers for wound healing and tissue engineering are two main applications among many others. In many instances, these structures come in direct vicinity of cells and govern cell behaviour and responses. In this study, gelatin nano/submicron structures were synthesized by binary nonsolvent aided coacervation (BNAC) method at pH ranging from 3 to 11 with an intention to employ in skin tissue regeneration. Effect of pH over morphology and the surface composition with respect to its ionic composition were studied. Further, the initial toxicity was assessed against peripheral blood mononuclear cells (PBMC). pH 7 was found to be the optimum for synthesis of gelatin nanoparticles (GNPs) with minimum particle size. Positive cell viability of 103.14% for GNPs synthesized at pH 7 was observed. It may be due to the minimum difference between cumulative negative and positive charge (CNCP) ratio of 1.19. Finally, effect of the gelatin nanoparticles over L929 mouse fibroblast cells was assessed through MTT assay. It has resulted in 122.77% cell viability.

Peptide-containing nanoformulations: Skin barrier penetration and activity contribution

Transdermal drug delivery presents a less invasive pathway, circumventing the need to pass through the gastrointestinal tract and liver, thereby reducing drug breakdown, initial metabolism, and gastrointestinal discomfort. Nevertheless, the unique composition and dense structure of the stratum corneum present a significant barrier to transdermal delivery. This article presents an overview of the current developments in peptides and nanotechnology to address this challenge. Initially, we sum up peptide-containing nanoformulations for transdermal drug delivery, examining them through the lenses of both inorganic and organic materials. Particular emphasis is placed on the diverse roles that peptides play within these nanoformulations, including conferring functionality upon nanocarriers and enhancing the biological efficacy of drugs. Subsequently, we summarize innovative strategies for enhancing skin penetration, categorizing them into passive and active approaches. Lastly, we discuss the therapeutic potential of peptide-containing nanoformulations in addressing a range of diseases, drawing insights from the biological activities and functions of peptides. Furthermore, the challenges hindering clinical translation are also discussed, providing valuable insights for future advancements in transdermal drug delivery.

Nanotechnology-based techniques for hair follicle regeneration

The hair follicle (HF) is a multicellular complex structure of the skin that contains a reservoir of multipotent stem cells. Traditional hair repair methods such as drug therapies, hair transplantation, and stem cell therapy have limitations. Advances in nanotechnology offer new approaches for HF regeneration, including controlled drug release and HF-specific targeting. Until recently, embryogenesis was thought to be the only mechanism for forming hair follicles. However, in recent years, the phenomenon of wound-induced hair neogenesis (WIHN) or de novo HF regeneration has gained attention as it can occur under certain conditions in wound beds. This review covers HF-specific targeting strategies, with particular emphasis on currently used nanotechnology-based strategies for both hair loss-related diseases and HF regeneration. HF regeneration is discussed in several modalities: modulation of the hair cycle, stimulation of progenitor cells and signaling pathways, tissue engineering, WIHN, and gene therapy. The HF has been identified as an ideal target for nanotechnology-based strategies for hair regeneration. However, some regulatory challenges may delay the development of HF regeneration nanotechnology based-strategies, which will be lastly discussed.

In vitro-in vivo assessments of apocynin-hybrid nanoparticle-based gel as an effective nanophytomedicine for treatment of rheumatoid arthritis

Apocynin (APO), a well-known bioactive plant-based phenolic phytochemical with renowned anti-inflammatory and antioxidant pharmacological activities, has recently emerged as a specific nicotinamide adenine dinucleotide phosphate-oxidase (NADPH) oxidase inhibitor. As far as we know, no information has been issued yet regarding its topical application as a nanostructured-based delivery system. Herein, APO-loaded Compritol® 888 ATO (lipid)/chitosan (polymer) hybrid nanoparticles (APO-loaded CPT/CS hybrid NPs) were successfully developed, characterized, and optimized, adopting a fully randomized design (32) with two independent active parameters (IAPs), namely, CPT amount (XA) and Pluronic® F-68 (PF-68) concentration (XB), at three levels. Further in vitro-ex vivo investigation of the optimized formulation was performed before its incorporation into a gel base matrix to prolong its residence time with consequent therapeutic efficacy enhancement. Subsequently, scrupulous ex vivo-in vivo evaluations of APO-hybrid NPs-based gel (containing the optimized formulation) to scout out its momentous activity as a topical nanostructured system for beneficial remedy of rheumatoid arthritis (RA) were performed. Imperatively, the results support an anticipated effectual therapeutic activity of the APO-hybrid NPs-based gel formulation against Complete Freund's Adjuvant-induced rheumatoid arthritis (CFA-induced RA) in rats. In conclusion, APO-hybrid NPs-based gel could be considered a promising topical nanostructured system to break new ground for phytopharmaceutical medical involvement in inflammatory-dependent ailments.

Applications and recent advances in transdermal drug delivery systems for the treatment of rheumatoid arthritis

Rheumatoid arthritis is a chronic, systemic autoimmune disease predominantly based on joint lesions with an extremely high disability and deformity rate. Several drugs have been used for the treatment of rheumatoid arthritis, but their use is limited by suboptimal bioavailability, serious adverse effects, and nonnegligible first-pass effects. In contrast, transdermal drug delivery systems (TDDSs) can avoid these drawbacks and improve patient compliance, making them a promising option for the treatment of rheumatoid arthritis (RA). Of course, TDDSs also face unique challenges, as the physiological barrier of the skin makes drug delivery somewhat limited. To overcome this barrier and maximize drug delivery efficiency, TDDSs have evolved in terms of the principle of transdermal facilitation and transdermal facilitation technology, and different generations of TDDSs have been derived, which have significantly improved transdermal efficiency and even achieved individualized controlled drug delivery. In this review, we summarize the different generations of transdermal drug delivery systems, the corresponding transdermal strategies, and their applications in the treatment of RA.

Bioactive Compound-Loaded Nanocarriers for Hair Growth Promotion: Current Status and Future Perspectives

Hair loss (alopecia) has a multitude of causes, and the problem is still poorly defined. For curing alopecia, therapies are available in both natural and synthetic forms; however, natural remedies are gaining popularity due to the multiple effects of complex phytoconstituents on the scalp with fewer side effects. Evidence-based hair growth promotion by some plants has been reported for both traditional and advanced treatment approaches. Nanoarchitectonics may have the ability to evolve in the field of hair- and scalp-altering products and treatments, giving new qualities to hair that can be an effective protective layer or a technique to recover lost hair. This review will provide insights into several plant and herbal formulations that have been reported for the prevention of hair loss and stimulation of new hair growth. This review also focuses on the molecular mechanisms of hair growth/loss, several isolated phytoconstituents with hair growth-promoting properties, patents, in vivo evaluation of hair growth-promoting activity, and recent nanoarchitectonic technologies that have been explored for hair growth.