Innovative approaches towards improved gluten-free bread properties

Quality, bioactivity and cytotoxicity of thymol nanofiber-fortified bread: Insight into molecular interaction mechanism

Thymol, a bioactive compound, offers significant potential in functional foods but its application is limited by poor stability, solubility and bioavailability. This study aimed to enhance thymol's stability and bioactivity by encapsulating it in pullulan-whey protein isolate-based electrospun nanofibers and evaluating its effects in bread fortification. The impact of encapsulation on thymol's recovery, functional properties, bioavailability and cytotoxicity was assessed. The results showed that bread fortified with thymol encapsulated pullulan-whey protein isolates-based nanofiber (THY-PW-NF) significantly improved flour pasting properties and bread texture, while also enhancing thymol's recovery (78.07 %) during bread preparation compared to using free thymol. THY-PW-NF in bread preserved its bioactivity after gastrointestinal digestion. It increased its inhibitory effects on alpha-amylase, alpha-glucosidase and pancreatic lipase as revealed by molecular docking and molecular dynamic simulations. Cytotoxicity assays on Caco-2 cells confirmed that exposure to free thymol, thymol extracted from nanofibers and THY-PW-NF derived from fortified bread within a concentration range of 0-20 μg/mL did not significantly impact cell viability compared to control cells over 24 h. These findings suggest that encapsulation effectively incorporates thymol into functional foods, maintaining its health benefits without compromising safety.

Evaluation of quality parameters of fried chicken chips containing different levels of roasted chickpea and corn flour

The effect of roasted chickpea and corn flour on the quality characteristics of chicken breast meat-based chips was evaluated in the present study. The chips are prepared in three formulations as follows: CC-1 (5 % corn-15 % roasted chickpea flour), CC-2 (10 % corn-10 % roasted chickpea flour), and CC-3 (15 % corn-5 % roasted chickpea flour). The chips dough was placed into a single screw extruder, and the extrudates were dried for 1.5 h at 50 °C to get final moisture content of 10 %. Afterward, the extrudate samples were deep-fat fried for 30 s at 180 °C using a deep fryer, cooled on a baking tray for 20 min at room temperature, manually coated with ready chip spices as a flavoring in each baking tray and performed with chemical analyses such as proximate composition, pH value, TBARS (Thiobarbituric Acid Reactive Substances) value, carbonyl content and hardness value. The results showed that CC-1, and CC-2 samples had similar moisture, protein, and ash contents, while CC-3 samples were statistically higher in fat, and carbohydrate content compared to other samples (P < 0.05). The amounts of roasted chickpea and corn flour significantly affected the pH value of the chips (P < 0.05). TBARS values, and carbonyl contents showed statistically increments (P < 0.05) up to 60 days at room temperature were observed for all samples. A decrease in hardness was observed in all samples with storage, but an increase was observed with increasing corn flour level. The meat-based chips provided both an alternative to new gluten-free products for celiacs, and an important source of protein for athletes.

Rheological properties of gluten-free chicken nugget batters and sensory characteristics of coated nuggets

The prevalence of celiac disease in about 1% of the global population has led to the growing demand for gluten-free alternatives. The quality of gluten-free chicken nugget batters made from rice and chickpea flour and xanthan gum (XG) was assessed and compared with traditional wheat flour. A 3 × 4 factorial design within a randomized complete block framework with three replications was used to examine the rheological properties of batters varying in flour type (wheat, rice, chickpea) and XG concentration (0%, 0.05%, 0.075%, 0.1%). Rheological tests revealed that the addition of 0.075% XG significantly increased the viscosity of CF batters from 51 to 165 mPa·s, restoring structure to a level comparable to gluten-containing WF batters. The addition of 0.075% XG increased the batter pickup for each type of flour. Sensory evaluation consisted of two components: a descriptive analysis with trained panelists examining nuggets at both 0% and 0.075% XG concentrations and a consumer acceptability study (n = 145) focused on nuggets formulated with 0.075% XG. Consumer panel results indicated no differences (p = 0.14) in acceptability between gluten-free and gluten-containing nuggets. Rice flour nuggets achieved the highest overall acceptability (6.2), featuring enhanced fracturability and preferred flavor profiles. While descriptive analysis identified earthy, beany, and nutty notes in chickpea flour nuggets, they were accepted by consumers (6.0). Both rice and chickpea flour proved to be viable substitutes for wheat flour in chicken nugget batters. These findings support the potential of gluten-free alternatives in meeting consumer expectations and dietary needs. PRACTICAL APPLICATION: This research supports the development of gluten-free fried battered chicken nuggets using rice and chickpea flour. By highlighting xanthan gum's role in enhancing batter stability, it offers manufacturers a scalable solution to meet the needs of consumers with gluten intolerance or celiac disease.

Characteristics of Soft Wheat and Tiger Nut (Cyperus esculentus) Composite Flour Bread

This study investigated the effects of tiger nut flour (TNF) incorporation (5-25%) on wheat-based bread characteristics. Dough rheology analysis revealed optimal gas retention at 10% TNF addition, while higher concentrations decreased dough stability. Physical analysis demonstrated that 10% TNF substitution yielded the highest specific volume (2.4 mL/g) and porosity (67.0%), with significant textural changes observed at higher concentrations. Bioactive compound analysis showed progressive increases in the total polyphenol content and antioxidant activity with increasing TNF levels, particularly in 25% TNF bread (111.31 mg TE/g dm in crumb). Storage studies over 7 days indicated that TNF incorporation affected bread staling characteristics, with 10-15% substitution levels maintaining better textural properties. The results suggest that TNF incorporation up to 15% can enhance bread's nutritional value, while maintaining acceptable technological properties, with 10% substitution showing an optimal balance between functional benefits and bread quality.

Enzyme applications in baking: From dough development to shelf-life extension

Enzymes play a vital role in baking, providing significant benefits from dough development to extending shelf life, which enhances product quality and consistency. Acting as biological catalysts, enzymes such as proteases and amylases break down proteins and starches, modifying dough rheology and improving fermentation. Lipases and oxidases further refine dough texture through emulsification and oxidation, while lipases also produce fatty acid derivatives during fermentation, contributing to the flavor and aroma of baked goods. Xylanases and cellulases optimize dough handling by altering fiber structure, and amylases help maintain moisture and texture, extending the shelf life of baked products. Ensuring regulatory compliance is essential when incorporating enzymes into baking processes, as bakers must address enzyme stability and determine appropriate dosages for reliable outcomes. Ongoing research is exploring innovative enzyme applications, including customized enzyme blends that target specific product qualities, offering new possibilities for product differentiation and innovation. In summary, enzyme-driven advancements present bakers with opportunities to improve product quality, shelf life, and consistency, while meeting industry regulations. This review emphasizes the critical impact enzymes have on dough properties and finished product characteristics, highlighting their role in driving future innovations within the baking industry.

The Influence of Oat β-Glucans of Different Molar Mass on the Properties of Gluten-Free Bread

The influence of β-glucans on the properties of gluten-free dough and bread is still not fully explained, with the literature suggesting both positive and negative effects. The aim of this study was to investigate the effect of the molar mass of oat β-glucans on the properties of gluten-free bread. Gluten-free breads were baked under standardized conditions from a model gluten-free mix without and with a 1% or 2% share of oat β-glucans of a low molar mass of 24,540 g/mol, a medium molar mass of 85,940 g/mol and a high molar mass of 1,714,770 g/mol. The share of β-glucans affected the increase in water addition to the baking mix and dough yield proportionally to the molar mass and amount of β-glucans. The β-glucans of the highest molar mass, particularly at a 2% share, were most effective in increasing bread volume, reducing hardness and increasing the moisture content of the bread crumb on the day of baking, as well as reducing the increase in hardness and maintaining a high moisture content of the bread crumb after 1 day of storage, compared to bread without added β-glucans.

Honey as a Sugar Substitute in Gluten-Free Bread Production

In recent years, there has been a significant focus on enhancing the overall quality of gluten-free breads by incorporating natural and healthy compounds to meet consumer expectations regarding texture, flavor, and nutritional value. Considering the high glycemic index associated with gluten-free products, the use of honey, renowned for its numerous health benefits, may serve as an optimal alternative to sucrose. This study investigates the impact of substituting sucrose, either partially (50%) or entirely (100%), with five Sardinian honeys (commercial multifloral honey, cardoon, eucalyptus, and strawberry tree unifloral honeys, and eucalyptus honeydew honey), on the rheological properties of the doughs and the physico-chemical and technological properties of the resulting gluten-free breads. The results demonstrated that an optimal balance was achieved between the leavening and viscoelastic properties of the doughs and the physical and textural attributes of the resulting breads in gluten-free samples prepared with a partial substitution of cardoon and multifloral honeys. Conversely, the least favorable outcomes were observed in samples prepared with strawberry tree honey and eucalyptus honeydew honey at both substitution levels. Therefore, the different behavior observed among all honey-enriched gluten-free breads was likely attributable to the distinct botanical origins of honey rather than to the substitution percentages employed.

Impact of Sourdough from a Commercial Starter Culture on Quality Characteristics and Shelf Life of Gluten-Free Rice Breads Supplemented with Chickpea Flour

This study aimed to develop a novel gluten-free bread using a rice/chickpea flour-based sourdough, fermented by a commercial starter culture, to improve the quality characteristics and shelf life of this product. The effects of sourdough incorporation, chickpea flour content (6.5 and 10.0%), and added water level (80-110%) on batter rheology and bread quality were investigated; bread textural characteristics upon storage (0-2 days) were also monitored. The level of added water was the primary factor influencing batter rheology, as evaluated by the back extrusion test. Sourdough incorporation decreased the pH and increased the acidity of batters and breads. The inclusion of sourdough, the water level, and the storage time affected the moisture and texture parameters of the bread crumb. Sourdough incorporation into bread formulations decreased crumb hardness and staling rate and increased loaf specific volume. Moreover, intermediate water (90 and 100%) and high chickpea (10%) levels in the batters increased loaf specific volumes and crust redness, respectively. Sensory analysis revealed that sourdough-enriched breads were preferred by the assessors concerning general appearance and crumb texture. Overall, bread formulations with the incorporation of sourdough, at a 90% level of added water in the batter mixtures, exhibited the most desirable characteristics according to both instrumental and sensory analyses.

Utilization of Sustainable Ingredients (Cañihua Flour, Whey, and Potato Starch) in Gluten-Free Cookie Development: Analysis of Technological and Sensorial Attributes

In recent years, the consumption of gluten-free products has increased due to the increasing prevalence of celiac disease and the increased preference for gluten-free diets. This study aimed to make cookies using a mixture of cañihua flour, whey, and potato starch. The use of a Box-Behnken design allowed for flexible ingredient proportions and physicochemical properties, centesimal composition, color, texture, and sensory attributes to be evaluated through consumer tests (Sorting and acceptability). The results highlighted significant variations in physicochemical data, composition, color, and texture across formulations. The blend with 38.51% cañihua flour, 10.91% sweet whey, 25.69% potato starch, 8.34% margarine, 11.10% sugar, 0.19% sodium chloride, 0.51% baking powder, 0.51% vanilla essence, and 4.24% egg exhibited superior sensory appeal. This formulation boasted excellent texture, aroma, flavor, color, and appearance, indicating high sensory and physicochemical quality. The use of cañihua flour, sweet whey, and potato starch not only provides a gluten-free option but also delivers a nutritious and sensorily pleasing choice for those with dietary restrictions. Future research could explore the commercial viability of producing these cookies on a larger scale, as well as investigating the potential health benefits of these ingredients.

Effect of Different Hydrocolloids on the Qualitative Characteristics of Fermented Gluten-Free Quinoa Dough and Bread

The aim of this research was to optimize the production process of fermented gluten-free quinoa bread. To this end, the effect of different hydrocolloids on the technological, fermentative, and nutritional properties of quinoa-based gluten-free doughs and breads was evaluated. For this purpose, 3% of four different hydrocolloids (sodium alginate, k-carrageenan, xanthan gum, and hydroxypropyl methylcellulose (HPMC)) were used in gluten-free doughs composed of 50% quinoa flour, 20% rice flour, and 30% potato starch. The rheological and fermentative properties of the doughs were evaluated, as well as the chemical composition, specific volume, crust and crumb color, and alveolar structure profile of gluten-free breads. The results highlighted the differences in dough rheology during mixing and fermentation of the doughs. In particular, HPMC showed a good gas retention (93%) during the fermentation of quinoa dough by registering the highest maximum dough development height (Hm). The gluten-free quinoa breads obtained were characterized by significantly different quality parameters (p < 0.05). The use of 3% HPMC resulted in breads with the lowest baking loss, the highest volume, and the most open crumb structure.

Alternative Plant-Based Gluten-Free Sourdough Pastry Snack Production by Using Beetroot and Legumes: Characterization of Physical and Sensorial Attributes

Objective of this study was to design a formula of a sourdough pastry snack by adding starter inoculum into the formulation which was obtained by the fermentation process through beetroot (Beta vulgaris) puree with black-eyed pea (Vigna unguiculata) and fava bean (Vicia faba). With this development process, it was aimed to review the functional impact of legumes as gluten replacement and emphasize the importance regarding physical and sensory attributes in a pastry snack product. First, a starter inoculum was developed based on modification of the shalgam fermentation process with legumes. An experimental design suggested by the response surface methodology was used to optimize its microbial properties and level of antioxidants with the factors of amounts of beetroot puree, fava bean/black-eyed pea ratio, and fermentation time. In the second part, this starter inoculum was mixed with fava bean flour to obtain a sourdough pastry snack (FBS) with improved physical and sensory attributes and compared to the wheat control sourdough (WCS) pastry snack after the baking process. According to the optimization results to produce starter inoculum with the optimum results of lactic acid bacteria 9.55 log cfu/mL, the level of antioxidant activity 91.86 μM TE/mL, and total yeast level 6.96 log cfu/mL; 75 mL of beetroot puree, 100% for fava bean, and fermentation for 24 h were obtained. Compared to WCS, FBS has approximately 16% higher hardness values. Also, a significant difference was observed for stiffness and springiness among samples. The retention of moisture was higher in the first 4 days following the storage for 8 days; the moisture content continuously decreased with the final moisture content of 12.6%. When compared with the results of textural profile analysis in terms of hardness, stiffness, and springiness, sensory results were correlated. Comparing the overall acceptability of the FBS to WCS, FBS was from moderate to higher scores, which indicated that it could be a promising alternative to chemically developed snack products and a preferred product for people suffering from celiac disease and other gluten intolerances.

Role of tailored sourdough fermentation in the flavor of wholegrain-oat bread

Sourdough technology has been known for its role in the improvement of texture, flavor, and quality of mainly wheat and rye-based breads for decades. However, little is reported about its use in the improvement of whole-grain oat bread, especially concerning flavor formation, which is one major consumer drivers. This study investigated the effects of sourdough obtained by different lactic acid bacteria and yeast starters consortia on the texture and flavor of 100% oat bread. Four different consortia were selected to obtain four oat sourdoughs, which were analyzed to assess the main features due to the different starter fermentation metabolism. Sourdoughs were added to breads as 30% dough weight. Bread quality was technologically monitored via hardness and volume measurements. Sourdough breads were softer and had higher specific volume. The sensory profile of sourdoughs and breads was assessed by a trained panel in sensory laboratory conditions, and the volatile profile was analyzed by HS-SPME-GC-MS. Sourdoughs were rated with higher intensities than untreated control for most of attributes, especially concerning sour aroma and flavor attributes. Sourdough breads were rated with higher intensities than control bread for sour vinegar flavor and total odor intensity, in addition they had richer volatile profile. Our results confirmed that sourdough addition can lead to an enhanced flavor, moreover, it demonstrated that the use of different consortia of lactic acid bacteria and yeast strains leads to the improvement of texture and altered sensory profile of whole-oat bread.

The cross-linking ability of dialdo-galactose in food processing condition

Cross-linking is a popular strategy to tailor the mechanical profile of foods and materials. Dialdo-galactose (DAG) is a hetero-sugar bearing two aldehyde groups that could potentially cross-link amino-group rich systems. In this study, we proved even in undesirable Maillard reaction condition, DAG is a very reactive Maillard substrate that could effectively cross-link all the tested foods, enhance their mechanical strength, and generate brown pigments during cross-linking. In particular, DAG treated sea cucumber exhibited good stability against heat-induced deterioration. In addition, DAG treated collagen sausage casing was more elastic and flexible then glutaraldehyde (GA) treated ones. DAG also outperformed GA in generating stronger chitosan hydrogels with higher G', and the DAG cross-linked chitosan film was more robust against acid-catalyzed decompositions. These results have not only confirmed DAG's cross-linking ability in food processing condition, but also provided useful information for the development of new food cross-linking agents based on oxidized saccharides.

Extracts with Nutritional Potential and Their Influence on the Rheological Properties of Dough and Quality Parameters of Bread

Formulating basic food to improve its nutritional profile is one potential method for food innovation. One option in formulating basic food such as bread is to supplement flours with specified amounts of non-bakery raw materials with high nutritional benefits. In the research presented here, we studied the influence of the addition of curcumin and quercetin extracts in amounts of 2.5% and 5% to wheat flour (2.5:97.5; 5:95). The analysis of the rheological properties of dough was carried out using a Mixolab 2. A Rheofermentometer F4 was used to assess the dough's fermentation, and a Volscan was used to evaluate the baking trials. The effect of the extracts on the rheological properties of dough was measured and found to be statistically significant, with curcumin shortening both dough development time and dough stability. Doughs made with greater quantities of extract had a greater tendency to early starch retrogradation, which negatively affects the shelf life of the end products. The addition of extracts did not significantly affect either the ability to form gas during fermentation or its retention, which is important because this gas is prerequisite to forming a final product with the required volume and porosity of crumb. Less favourable results were found on sensory evaluation, wherein the trial bread was significantly worse than the control wheat bread. The panel's decision-making might have been influenced by the atypical colour of the bread made with additives, and in case of a trial bread made with quercetin, by a bitter taste. From the technological point of view, the results confirmed that the composite flours prepared with the addition of extracts of curcumin and quercetin in amounts of 2.5% and 5% can be processed according to standard procedures. The final product will be bread with improved nutritional profile and specific sensory properties, specifically an unconventional and attractive colour.

A label-free aptamer-based colorimetric biosensor for rapid gliadin detection in foods: a focus on pasta, bread and cookies

Despite numerous advancements in gluten detection, a substantial need remains for innovative, cost-effective, in situ methods that can be employed without complex analytical instruments. Addressing this demand, this study introduces a pioneering label-free colorimetric biosensor for the in situ detection of gliadin, a major component of gluten, which is a prevalent trigger of food allergies. Our novel approach employs the strategic coating of gold nanoparticles (AuNP) with gliadin-specific aptamers. In the absence of gliadin, these aptamers stably disperse AuNP, preventing their aggregation. However, upon the introduction of gliadin and in the presence of sodium chloride, AuNP aggregate, yielding a measurable colorimetric signal that facilitates the precise quantification of gliadin. Under rigorously optimized conditions, this AuNP/aptamer-based colorimetric biosensor demonstrated exceptional sensitivity and selectivity, with a detection limit of 32.1 ng mL-1 and a linear response range of 0-300 ng mL-1. Critically, the sensor maintained reliable performance when applied to real-world food samples, including gluten-free bread, cookies, and pasta. Due to its simplicity, selectivity, speed, and cost-effectiveness, this assay represents a significant advancement over current gluten detection methods. Moreover, the developed AuNP/aptamer-based colorimetric biosensor design holds promising potential for adaptation to detect other food allergens or protein toxins through selective aptamer modifications.

Development of Gluten-Free Bread Production Technology with Enhanced Nutritional Value in the Context of Kazakhstan

This research aims to enhance the nutritional value of gluten-free bread by incorporating a diverse range of components, including additives with beneficial effects on human health, e.g., dietary fibers. The research was focused on improving the texture, taste, and nutritional content of gluten-free products by creating new recipes and including novel biological additives. The goal was to develop gluten-free bread with less than 3 ppm gluten content that can be eaten by people suffering from gluten sensitivity. The physical and chemical properties of gluten-free rice, corn, green buckwheat, chickpea, amaranth, and plantain flours were examined to understand their unique characteristics and the possibility of their mixing combination to achieve the desired results. Initially, nine recipes were prepared, and in survey research, four baking recipes were selected and tested. The composition of amino acids in the prepared gluten-free bread was determined. The variant made of corn, green buckwheat flour with plantain was found to be top-rated. Changes in the nutritional content of the new product were analyzed, and general regulations and nutritional values were identified. Experimental baking processes were carried out, leading to the successful formulation of gluten-free bread containing corn, green buckwheat, and plantain flour in a ratio of 40:40:20, meeting gluten-free requirements and demonstrating improved nutritional properties, as well as consumption properties, confirmed by surveys conducted on a group of consumers.

Whole Flour of Purple Maize as a Functional Ingredient of Gluten-Free Bread: Effect of In Vitro Digestion on Starch and Bioaccessibility of Bioactive Compounds

The growing demand for gluten-free products requires the study of alternatives to produce nutritionally and technologically favorable foods. The aim was to evaluate the content and antioxidant capacity of gluten-free bread enriched with whole flour of purple maize (PM) and how starch and bioaccessibility of antioxidant compounds were modified during in vitro digestion. Gluten-free bread was prepared with the addition of 34%, 50%, and 70% PM, and white maize bread served as control. The content of total polyphenols, anthocyanins, and antioxidant capacity through FRAP and TEAC was measured. Specific volume, crumb texture, and starch digestibility were determined in the breads. Simultaneously, in vitro digestion and dialysis by membrane were performed to evaluate the bioaccessible and potentially bioavailable fraction. Bread with 34% PM had a similar specific volume and crumb texture to the control, but higher content of polyphenols (52.91 mg AG/100 g), anthocyanins (23.13 mg c3-GE/100 g), and antioxidant capacity (3.55 and 5.12 µmol tr/g for FRAP and TEAC, respectively). The PM breads had a higher antioxidant content and capacity and higher slowly digestible and resistant starch than the control. These parameters increased as the PM proportion rose. After digestion, anthocyanins were degraded, polyphenols and antioxidant capacity decreased, but they remained potentially bioavailable, although to a lesser extent. Bread with 34% shows acceptable technological parameters, lower starch digestibility, and contribution of bioactive compounds with antioxidant capacity. This indicates that purple maize flour represents a potential ingredient to produce gluten-free bread with an improved nutritional profile.

Rice-Based Gluten-Free Foods and Technologies: A Review

Rice, one of the most widely consumed staples worldwide, serves as a versatile gluten-free substitute. However, review articles on technological developments in grain-free production focusing on rice are scarce. This review assesses various research results concerning the quality attributes of rice-based gluten-free foods, including bread, pasta, and beer. To optimize the key attributes in processed products, such as dough leavening in bread and the physical and cooking properties of noodles and pasta, research has focused on blending different gluten-free grains and incorporating additives that mimic the gluten function. Additionally, various processing technologies, such as starch preprocessing and extrusion puffing processes, have been employed to boost the quality of rice-based gluten-free products. Today, a variety of products, including bread, noodles, and beer, use rice as a partial replacement for barley or wheat. With rapid advancements in technology, a noticeable portion of consumers now shows a preference for products containing rice as a substitute. This trend indicates that rice-based gluten-free foods can be enhanced by leveraging the latest developments in gluten-free product technologies, particularly in countries where rice is a staple or is predominantly cultivated.

Current status and future prospects of sensory and consumer research approaches to gluten-free bakery and pasta products

Sensory and consumer research performs a pivotal role in gluten-free (GF) food research and development due to consumer dissatisfaction about currently available products, despite the continued growth of this market and promising research developments. Nowadays, almost half of the original articles about GF products include sensory analysis. A current overview is needed to help both food scientists and industry indentify current trends and forward-looking approaches. This current review has gathered information concerning sensory and consumer research for GF bakery and pasta products, from studies published in the last decade, and then discusses future challenges in the light of recent advances. Among the promising approaches, projective techniques that collect data using social media can provide quick, spontaneous and direct opinions from GF consumers. They can also be used to evaluate trends and cross-cultural or global insights. Participatory methods have highlighted the importance of label information and may further explore the behavior of GF consumers in more realistic environments, as well as to evaluate the intrinsic GF food factors in GF consumer opinions, emotions, behavior and choices. This review details current issues occurring in sensory analysis of GF products, which still need to be resolved. The combination of affective and analytical methods allows for a better characterization of the samples and such sensory analysis of GF products in the future could guide product development and quality control, overcoming technological, nutritional, and shelf-life issues.

Heat and shear stability of particle stabilised foams for application in gluten-free bread

Bread forms an integral part of the daily diet in many cultures worldwide. At the same time, a significant number of people try to avoid wheat-based products for either health reasons or due to personal preferences. The absence of a protein network in gluten free bread affects its structure, taste, texture and shelf-life. This paper suggests a technological solution to this issue that uses a pre-foamed mass of gluten free raw materials which is mixed with the bread's ingredients, then kneaded and baked to form a high quality gluten free bread. To survive the high shear stresses during kneading and temperature increase during baking, the foam requires exceptional stability. This stability was achieved through particle stabilisation of the bubble interfaces. Both of the tested foams (with and without particles) exhibited thermal stability up to 80 °C. However, resistance to shear stresses was higher in the particle stabilised foams. Of all the tested particles, linseed press cake and banana powder led to the best results. In conclusion, particle stabilised foams seem very well suited to applications in gluten free baked goods. Further application potential is seen for vegan foamed desserts.

Development of Gluten-Free Bread Using Teosinte (Dioon mejiae) Flour in Combination with High-Protein Brown Rice Flour and High-Protein White Rice Flour

Gluten-free bread is an important product that is under development using different sources, such as rice and starchy plants. Teosinte seeds are utilized by ethnic groups in Honduras to produce gluten-free flour to prepare traditional baked goods and beverages. The quality of gluten-free products could vary depending on flour properties, such as amylose content, particle size, and water absorption capacity. A good strategy for developing baked goods is to mix different cereal grain sources to optimize their physicochemical properties. As a result, the current study aimed to develop bread from novel flours including teosinte (TF), high-protein brown rice (BRF), and high-protein white rice (WRF). Breads were analyzed for hardness, specific volume, and color utilizing a Simplex-Centroid mixture design coupled with the desirability function. Pasting, and rheological characteristics of the flours, were also analyzed. For flour characteristics, TF addition to BRF or WRF decreased the peak, trough, breakdown, setback, and final viscosities, which would result in a more stable bread and decrease the flow index of rice flour dispersions. BRF and WRF had similar pasting properties, except that BRF had a lower breakdown viscosity. For bread characteristics, TF addition to BRF or WRF increased the specific volume and hardness of the bread compared to rice flour alone. L* of the crust and crumb a* values were increased with greater TF in the mixture, whereas TF decreased the crust a*and b* values and crumb L* values when mixed with BRF or WRF compared to rice flours alone. WRF and BRF were similar in crumb color (L* and a*), except that BRF had greater crumb yellowness (b*). Teosinte flour can be used in combination with rice flour to produce bread with good quality.

Impact of exopolysaccharides-producing lactic acid bacteria on the chemical, rheological properties of buckwheat sourdough and the quality of buckwheat bread

Exopolysaccharides (EPS) produced in situ by lactic acid bacteria (LAB) during sourdough fermentation have the potential to replace hydrocolloids in gluten-free sourdoughs. This study investigated effects of an EPS-producing Weissella cibaria NC516.11 fermentation on chemical, rheological properties of sourdough and the quality of buckwheat bread. Results indicate that the buckwheat sourdough fermentation by W. cibaria NC516.11 had lower pH (4.47) and higher total titrable acidity (8.36 mL) compared with other groups, and the polysaccharide content reached 3.10 ± 0.16 g/kg. W. cibaria NC516.11 can significantly improve the rheological properties and viscoelastic properties of sourdough. Compared with control group, the baking loss of NC516.11 group bread decreased by 19.94%, specific volume increased by 26.03%, and showed good appearance and cross-sectional morphology. Scanning electron micrograph revealed an intact and less porous cell structure. Meanwhile, W. cibaria NC516.11 significantly improved the texture of the bread and reduced the hardness and moisture loss during storage.

Nutritional Improvements of Sourdough Breads Made with Freeze-Dried Functional Adjuncts Based on Probiotic Lactiplantibacillus plantarum subsp. plantarum and Pomegranate Juice

New types of sourdough breads are proposed, made with freeze-dried sourdough adjuncts based on: (i) Lactiplantibacillus plantarum subsp. plantarum ATCC 14917, a potential probiotic (LP) alone or (ii) with the addition of unfermented pomegranate juice (LPPO) and (iii) pomegranate juice fermented by the same strain (POLP). Physicochemical, microbiological, and nutritional characteristics (in vitro antioxidant capacity, AC, total phenolics, TPC, and phytate content) of the breads were evaluated and compared with commercial sourdough bread. All adjuncts performed well; the best results being those obtained by POLP. Specifically, the highest acidity (9.95 mL of 0.1 M NaOH) and organic acid content (3.02 and 0.95 g/kg, lactic and acetic acid, respectively) as well as better resistance to mold and rope spoilage (12 and 13 days, respectively) were observed for POLP3 bread (sourdough with 6% POLP). Significant nutritional improvements were observed by all adjuncts, in terms of TPC, AC, and phytate reduction (103 mg gallic acid/100 g, 232 mg Trolox/100 g, and 90.2%, respectively, for POLP3). In all cases, the higher the amount of adjunct, the better the results. Finally, the good sensory properties of the products indicate the suitability of the proposed adjuncts for sourdough breadmaking, while their application in freeze-dried, powdered form can facilitate commercial application.

A New Approach for the Development and Optimization of Gluten-Free Noodles Using Flours from Byproducts of Cold-Pressed Okra and Pumpkin Seeds

The significant protein and dietary fiber content of cold-pressed pumpkin (PSF) and okra (OSF) seed byproducts are well-known. However, their impact on noodles' nutritional quality has never been studied. For the first time, noodle formulation was developed employing a genetic algorithm in the R programming language to achieve the most optimal sensory attributes as well as nutritional composition, color, cooking, and textural properties. The optimized noodle formulation was detected for OSF, PSF, gluten-free flour, salt, and egg with the following amounts: 11.5 g, 87.0 g, 0.9 g, 0.6 g, and 40 g, respectively, with 10.5 mL of water. The total protein (TP%), total fat (TF%), total carbohydrate (TC%), total dietary fiber content (TDF%), ash (%), total phenolic content (TPC mg GAE/100 g), and ABTS (%) of PSF were found to be 39%, 17%, 7%, 18%, 3%, 19%, and 48%, respectively, whereas for OSF, 33%, 8%, 21%, 32%, 5%, 16%, and 38%, respectively, were detected. In addition, TP (42.88%), TF (15.6%), ash (5.68%), TDF (40.48%), TPC (25.5 mg GAE/100 g), and ABTS (70%) values were obtained for the noodles. Consequently, the valorization of the cold oil press industry's byproducts may be used as ingredients that add high value to gluten-free protein and fiber-rich noodle production, and they may gain interest from both processors and consumers.

Optimization of tannin-containing sorghum bran addition to gluten-free bread

Ingredients used to enhance sensory quality of gluten-free (GF) bread often lack in nutrients. This presents nutritional challenges for celiac-positive individuals and fails to meet expectations of healthfulness for non-celiac GF consumers. Sorghum (Sorghum bicolor L. Moench) flour can provide acceptable GF bread properties, and tannin-containing varieties contain antioxidants concentrated in the bran along with dietary fiber. Using a central composite design, tannin-containing sumac sorghum bran, gum (xanthan + guar), and water levels were optimized in a GF sorghum-based bread formulation. Loaf specific volume and gas cells/cm² were maximized while minimizing hardness and cell wall thickness. The optimum formulation containing 14.2% sorghum bran, 1% gum, and 145% water (flour basis) effectively increased dietary fiber in bread to 13.4% (considered "high fiber") and showed oxygen radical absorbance capacity of 61.6 µmol TE/g. This optimum formulation did not differ from a sorghum flour-based control bread in consumers' (N = 100) liking of color, texture, flavor, overall acceptability, nor willingness to buy (WTB). All mean hedonic scores (numbered 9-point scale) were above 5, whereas average WTB was 4.7 for the optimum formulation and 4.6 for the control (9-point Likert scale) among consumers varying in GF bread consumption habits. Perceived bread bitterness was low (averaging 2.85 on 9-point intensity scale), did not vary between samples despite marked differences in antioxidant capacity, and was not correlated with WTB. When utilizing effective optimization models with key functional ingredients, sumac sorghum bran addition can enhance dietary fiber and antioxidant potential in sorghum-based GF breads without compromising quality attributes.

Influence of Particle Size and Xylanase Pretreatment of Proso Millet Bran on Physical, Sensory and Nutritive Features of Gluten-Free Bread

Research background

Millet bran is a by-product rich in dietary fibre, micronutrients and bioactive compounds which are often deficient in a gluten-free diet. Previously, cryogenic grinding has been shown to improve the functionality of bran to some extent, although it offered limited benefits for bread making. This study aims to investigate the effects of adding proso millet bran depending on its particle size and xylanase pretreatment on the physicochemical, sensory and nutritional properties of gluten-free pan bread.

Experimental approach

Coarse bran (d50=223 μm) was ground to medium size (d50=157 μm) using an ultracentrifugal mill or to superfine particles (d50=8 μm) using a cryomill. Millet bran presoaked in water (for 16 h at 55 °C) with or without the addition of fungal xylanase (10 U/g) replaced 10% of the rice flour in the control bread. Bread specific volume, crumb texture, colour and viscosity were measured instrumentally. Along with proximate composition, the content of soluble and insoluble fibre, total phenolic compounds (TPC) and phenolic acids as well as total and bioaccessible minerals of bread were assessed. Sensory analysis of the bread samples included a descriptive, hedonic and ranking test.

Results and conclusions

Dietary fibre content (7.3-8.6 g/100 g) and TPC (42-57 mg/100 g) on dry mass basis of the bread loaves depended on bran particle size and xylanase pretreatment. The effect of xylanase pretreatment was most evident in the loaves with medium bran size in terms of higher content of fibre soluble in ethanol (45%) and free ferulic acid content (5%), improved bread volume (6%), crumb softness (16%) and elasticity (7%), but lower chewiness (15%) and viscosity (20-32%). Bread bitterness and dark colour were increased after adding medium-sized bran but its bitter aftertaste, crust crookedness, crumb hardness and graininess were reduced with xylanase pretreatment. Although bran addition impaired protein digestibility, it enriched the bread with iron (341%), magnesium (74%), copper (56%) and zinc (7.5%). Xylanase pretreatment of the bran resulted in the improved bioaccessibility of zinc and copper of the enriched bread compared to the control and bread without xylanase.

Novelty and scientific contribution

Application of xylanase to medium sized bran obtained by ultracentrifugal grinding was more successful than its application to superfine bran obtained by the multistage cryogrinding as it resulted in more soluble fibre in gluten-free bread. Moreover, xylanase was proven beneficial in maintaining desirable bread sensory properties and mineral bioaccessibility.

Processing strategies to improve the breadmaking potential of whole-grain wheat and non-wheat flours

Strategies to increase the bio-functionality of staple food, such as bread, by incorporating whole-grain wheat flour or flour from other, non-wheat grains instead of refined wheat flour are often constrained with the lack of their techno-functionality, despite the associated beneficial effect on consumers' health and well-being. Most of the available studies investigating the possibilities to improve technological and sensory quality of bread prepared using whole-grain wheat and non-wheat flours still rely on formulation approaches in which different additives and novel ingredients are used as structuring agents. Less attention has been given to technological approaches which could be applied to induce structural changes on biopolymer level and thus increase the breadmaking potential of whole grains such as: modification of grain and biopolymers structure by germination, flour particle size reduction, dry-heat or hydrothermal treatment, atmospheric cold plasma, high-pressure processing or ultrasound treatment. Strategies to modify processing variables during breadmaking like dough kneading and hydration modification, sourdough fermentation or non-conventional baking techniques application are also poorly exploited for bread preparation from non-wheat grains. In this paper, the challenges and opportunities of abovementioned processing strategies for the development of bread with whole-wheat flours and non-wheat flours from underutilised gluten-containing or gluten-free cereals and pseudocereals will be reviewed throughout the whole breadmaking chain: from grain to bread and from milling to baking. Feasibility of different strategies to increase the technological performance and sensory quality of bread based on whole-grain wheat flours or flours from other, non-wheat grains will be addressed considering both the environmental, safety and nutritive advantages.

Quality of Low-Allergy Wheat ('O-Free') Flour and Optimization of Its Bread-Baking Performance

This study explored the quality of hypoallergenic wheat ('O-free') developed in Korea and optimized the basic ingredients and processing conditions for making 'O-free' bread using response surface methodology. Water and yeast amounts and mixing and fermentation times were selected as factors, and each factor's tested range was set by a central composite design using Design Experts: water 52-60 g, yeast 1.5-4.5 g, mixing time 2.5-5 min, and fermentation time 50-70 min. Bread height, volume, and firmness were analyzed to determine bread quality. Flour quality analysis showed that 'O-free' flour's gluten strength was weak. 'O-free' flour exhibited inferior bread-making performance compared to representative bread flour. Water and yeast amounts and mixing time, except for fermentation time, affected bread quality significantly. The interaction between yeast and fermentation also affected bread quality significantly. The optimized condition for making bread using 'O-free' flour is 60 g of water, 2.6 g of yeast, 2.5 min of mixing time, and 70.0 min of fermentation time. In conclusion, 'O-free' flour with the changed gluten composition showed poor gluten strength and bread-making performance. However, modifying the formulation of the basic ingredients and processing conditions could significantly improve the production of high-quality hypoallergenic bread.

Milk Thistle Oilseed Cake Flour Fractions: A Source of Silymarin and Macronutrients for Gluten-Free Bread

The utilization of plant by-products as functional food ingredients has received increasing attention in the last decade. One such by-product generated during milk thistle oil pressing is oilseed cakes, which could be used as a novel food ingredient. Therefore, the study aimed at investigating the effects of the addition of milk thistle oilseed cake (MTOC) flour fractions obtained via dry sieving, differing in particle size (unsieved; coarse: >710 µm; medium: 315−710 µm; and fine: <315 µm), on the quality of gluten-free bread and stability of silymarin during breadmaking. The 10% addition of the fractions into gluten-free bread increased the protein, fibre, fat, ash and silymarin content. The breads with the coarse fraction had the highest content of fibre, whereas the breads with the fine fraction excelled in protein, fat and ash content. The medium fraction was characterized as the richest source of silymarin, whilst the fine fraction was the poorest. Silymarin constituents were slightly released during dough rising but also partially decomposed during baking; moreover, silydianin was the most susceptible and degraded the most. The enriched breads had better sensory and textural properties compared to the control bread. The results suggest that MTOC flour fractions can improve the potential health benefits and nutritional profile of gluten-free bread.

Sorghum Flour Application in Bread: Technological Challenges and Opportunities

Sorghum has a long history of use in the production of different types of bread. This review paper discusses different types of bread and factors that affect the physicochemical, technological, rheological, sensorial, and nutritional properties of different types of sorghum bread. The main types of bread are unleavened (roti and tortilla), flatbread with a pre-ferment (injera and kisra), gluten-free and sorghum bread with wheat. The quality of sorghum flour, dough, and bread can be improved by the addition of different ingredients and using novel and traditional methods. Furthermore, extrusion, high-pressure treatment, heat treatment, and ozonation, in combination with techniques such as fermentation, have been reported for increasing sorghum functionality.

Kefir Enriched with Carob (Ceratonia siliqua L.) Leaves Extract as a New Ingredient during a Gluten-Free Bread-Making Process

This work is focused on the preparation of an innovative gluten-free (GF) bread with remarkable softness and antioxidant features over time. To overcome the technological inconveniences related to the removal of gluten from bread, the kefir beverage fortified with antioxidant vegetable extracts is employed as a functional ingredient in the bread-making process. In this context, carob (Ceratonia siliqua L.) leaves represent an outstanding source of active molecules and are proposed to enrich milk-based beverages. Different extraction strategies were evaluated, and the process was improved to select a solvent (water, ethanol, or hydroalcoholic solution) and methodology (Soxhlet or ultrasound-assisted extraction) able to guarantee the best performances in terms of yield and antioxidant capacity. For kefir addition, two varieties of carob leaves (Selvatica and Amele) are employed. Functional GF bread, obtained by partially replacing the water with the enriched kefir, is prepared, and the final product is characterized in terms of its antioxidant and rheological properties. The final product shows improved compositional and technological parameters over time.

Effect of presence of gluten and spreads on the oral processing behavior of breads

Little is known about the oral processing behavior of gluten-free (GF) products. This study investigated the oral processing behavior of one commercial GF bread and one gluten-containing (GC) equivalent with and without spreads. Oral processing parameters were determined through video recording and the predominant texture attributes were accessed using a check-all-that-apply test. The GF bread was perceived crumbly, dry and sandy and had a longer eating duration than the GC bread, which was perceived soft, spongy, pasty and sticky. Results suggest that the structure of the GF bread was easily fragmented during mastication and a longer period in the mouth was required to prepare a cohesive bolus for swallowing. The addition of spreads increased softness perception but did not affect chewing behavior. Oral processing behavior of GF products should be further investigated to understand how eating rate, satiation responses and food intake can be modulated in GF products.

Gluten-Free Bread and Bakery Products Technology

Gluten, a protein fraction from wheat, rye, barley, oats, their hybrids and derivatives, is very important in baking technology. The number of people suffering from gluten intolerance is growing worldwide, and at the same time, the need for foods suitable for a gluten-free diet is increasing. Bread and bakery products are an essential part of the daily diet. Therefore, new naturally gluten-free baking ingredients and new methods of processing traditional ingredients are sought. The study discusses the use of additives to replace gluten and ensure the stability and elasticity of the dough, to improve the nutritional quality and sensory properties of gluten-free bread. The current task is to extend the shelf life of gluten-free bread and bakery products and thus extend the possibility of its distribution in a fresh state. This work is also focused on various technological possibilities of gluten-free bread and the preparation of bakery products.

Understanding gluten-free bread ingredients during ohmic heating: function, effect and potential application for breadmaking

Due to the absence of gluten, several challenges arise during gluten-free (GF) bread baking, affecting the mid-and-end-product quality. The main approach to overcome this issue is to combine certain functional ingredients and additives, to partially simulate wheat bread properties. In addition, the optimization of the baking process may contribute to improved product quality. A recent and very promising alternative to conventional baking is the use of ohmic heating (OH). Due to its volumetric and uniform heating principle, crumb development during baking and consequently bread volume is improved, which enhances the overall GF bread quality. Depending on the GF formulation, critical factors such as the electrical conductivity and viscosity of the batter may vary, which have a significant effect on the OH process performance. Therefore, this review attempts to provide a deeper understanding of the functionality of GF bread ingredients and how these may affect critical parameters during the OH processing.

Towards Sustainable Shifts to Healthy Diets and Food Security in Sub-Saharan Africa with Climate-Resilient Crops in Bread-Type Products: A Food System Analysis

Massive urbanization and increasing disposable incomes favor a rapid transition in diets and lifestyle in sub-Saharan Africa (SSA). As a result, the SSA population is becoming increasingly vulnerable to the double burden of malnutrition and obesity. This, combined with the increasing pressure to produce sufficient food and provide employment for this growing population together with the threat of climate change-induced declining crop yields, requires urgent sustainable solutions. Can an increase in the cultivation of climate-resilient crops (CRCs) and their utilization to produce attractive, convenient and nutritious bread products contribute to climate change adaptation and healthy and sustainable diets? A food system analysis of the bread food value chain in SSA indicates that replacement of refined, mostly imported, wheat in attractive bread products could (1) improve food and nutrition security, (2) bring about a shift to more nutritionally balanced diets, (3) increase economic inclusiveness and equitable benefits, and (4) improve sustainability and resilience of the food system. The food system analysis also provided systematic insight into the challenges and hurdles that need to be overcome to increase the availability, affordability and uptake of CRCs. Proposed interventions include improving the agronomic yield of CRCs, food product technology, raising consumer awareness and directing policies. Overall, integrated programs involving all stakeholders in the food system are needed.

The Role of Hydrocolloids in Gluten-Free Bread and Pasta; Rheology, Characteristics, Staling and Glycemic Index

Hydrocolloids are important ingredients controlling the quality characteristics of the final bakery products. Hydrocolloids are frequently used in gluten-free (GF) recipes, mimicking some rheological properties of gluten, improving dough properties, delaying starch retrogradation and improving bread texture, appearance and stability. Hydrocolloids addition increases viscosity and incorporation of air into the GF dough/batter. Besides their advantages for the technological properties of the GF bread, hydrocolloids addition may impact the glycemic index (GI) of the final product, thus answering the demand of people requiring products with low GI. This review deals with the application of hydrocolloids in GF bread and pasta with a focus on their effect on dough rheology, bread hardness, specific volume, staling and GI.