Sub-confluent culture of human mesenchymal stromal cells on biodegradable polycaprolactone microcarriers enhances bone healing of rat calvarial defect

The potential bone regeneration effects of leptin- and osteolectin-coated 3D-printed PCL scaffolds: anin vivostudy

This study investigated the effectiveness of bone regeneration upon the application of leptin and osteolectin to a three-dimensional (3D) printed poly(ϵ-caprolactone) (PCL) scaffold. A fused deposition modeling 3D bioprinter was used to fabricate scaffolds with a diameter of 4.5 mm, a height of 0.5 mm, and a pore size of 420-520 nm using PCL (molecular weight: 43 000). After amination of the scaffold surface for leptin and osteolectin adhesion, the experimental groups were divided into the PCL scaffold (control), the aminated PCL (PCL/Amine) scaffold, the leptin-coated PCL (PCL/Leptin) scaffold, and the osteolectin-coated PCL (PCL/Osteo) scaffold. Next, the water-soluble tetrazolium salt-1 (WST-1) assay was used to assess cell viability. All groups exhibited cell viability rates of >100%. Female 7-week-old Sprague-Dawley rats were used forin vivoexperiments. Calvarial defects were introduced on the rats' skulls using a 5.5 mm trephine bur. The rats were divided into the PCL (control), PCL/Leptin, and PCL/Osteo scaffold groups. The scaffolds were then inserted into the calvarial defect areas, and the rats were sacrificed after 8-weeks to analyze the defect area. Micro-CT analysis indicated that the leptin- and osteolectin-coated scaffolds exhibited significantly higher bone regeneration. Histological analysis revealed new bone and blood vessels in the calvarial defect area. These findings indicate that the 3D-printed PCL scaffold allows for patient-customized fabrication as well as the easy application of proteins like leptin and osteolectin. Moreover, leptin and osteolectin did not show cytotoxicity and exhibited higher bone regeneration potential than the existing scaffold.

Platelets: A Potential Factor that Offers Strategies for Promoting Bone Regeneration

Bone defects represent a prevalent category of clinical injuries, causing significant pain and escalating health care burdens. Effectively addressing bone defects is thus of paramount importance. Platelets, formed from megakaryocyte lysis, have emerged as pivotal players in bone tissue repair, inflammatory responses, and angiogenesis. Their intracellular storage of various growth factors, cytokines, and membrane protein receptors contributes to these crucial functions. This article provides a comprehensive overview of platelets' roles in hematoma structure, inflammatory responses, and angiogenesis throughout the process of fracture healing. Beyond their application in conjunction with artificial bone substitute materials for treating bone defects, we propose the potential future use of anticoagulants such as heparin in combination with these materials to regulate platelet number and function, thereby promoting bone healing. Ultimately, we contemplate whether manipulating platelet function to modulate bone healing could offer innovative ideas and directions for the clinical treatment of bone defects.

Efficient expansion and delayed senescence of hUC-MSCs by microcarrier-bioreactor system

BACKGROUND

Human umbilical cord mesenchymal stem cells (hUC-MSCs) are widely used in cell therapy due to their robust immunomodulatory and tissue regenerative capabilities. Currently, the predominant method for obtaining hUC-MSCs for clinical use is through planar culture expansion, which presents several limitations. Specifically, continuous cell passaging can lead to cellular aging, susceptibility to contamination, and an absence of process monitoring and control, among other limitations. To overcome these challenges, the technology of microcarrier-bioreactor culture was developed with the aim of ensuring the therapeutic efficacy of cells while enabling large-scale expansion to meet clinical requirements. However, there is still a knowledge gap regarding the comparison of biological differences in cells obtained through different culture methods.

METHODS

We developed a culture process for hUC-MSCs using self-made microcarrier and stirred bioreactor. This study systematically compares the biological properties of hUC-MSCs amplified through planar culture and microcarrier-bioreactor systems. Additionally, RNA-seq was employed to compare the differences in gene expression profiles between the two cultures, facilitating the identification of pathways and genes associated with cell aging.

RESULTS

The findings revealed that hUC-MSCs expanded on microcarriers exhibited a lower degree of cellular aging compared to those expanded through planar culture. Additionally, these microcarrier-expanded hUC-MSCs showed an enhanced proliferation capacity and a reduced number of cells in the cell cycle retardation period. Moreover, bioreactor-cultured cells differ significantly from planar cultures in the expression of genes associated with the cytoskeleton and extracellular matrix.

CONCLUSIONS

The results of this study demonstrate that our microcarrier-bioreactor culture method enhances the proliferation efficiency of hUC-MSCs. Moreover, this culture method exhibits the potential to delay the process of cell aging while preserving the essential stem cell properties of hUC-MSCs.

Emerging Trends in Biodegradable Microcarriers for Therapeutic Applications

Microcarriers (MCs) are adaptable therapeutic instruments that may be adjusted to specific therapeutic uses, making them an appealing alternative for regenerative medicine and drug delivery. MCs can be employed to expand therapeutic cells. MCs can be used as scaffolds for tissue engineering, as well as providing a 3D milieu that replicates the original extracellular matrix, facilitating cell proliferation and differentiation. Drugs, peptides, and other therapeutic compounds can be carried by MCs. The surface of the MCs can be altered, to improve medication loading and release, and to target specific tissues or cells. Allogeneic cell therapies in clinical trials require enormous volumes of stem cells, to assure adequate coverage for several recruitment locations, eliminate batch to batch variability, and reduce production costs. Commercially available microcarriers necessitate additional harvesting steps to extract cells and dissociation reagents, which reduces cell yield and quality. To circumvent such production challenges, biodegradable microcarriers have been developed. In this review, we have compiled key information relating to biodegradable MC platforms, for generating clinical-grade cells, that permit cell delivery at the target site without compromising quality or cell yields. Biodegradable MCs could also be employed as injectable scaffolds for defect filling, supplying biochemical signals for tissue repair and regeneration. Bioinks, coupled with biodegradable microcarriers with controlled rheological properties, might improve bioactive profiles, while also providing mechanical stability to 3D bioprinted tissue structures. Biodegradable materials used for microcarriers have the ability to solve in vitro disease modeling, and are advantageous to the biopharmaceutical drug industries, because they widen the spectrum of controllable biodegradation and may be employed in a variety of applications.

SDF-1 Functionalized Hydrogel Microcarriers for Skin Flap Repair

Critically sized skin flaps used to treat skin defects often suffer from necrosis due to insufficient blood supply. Hence there is an urgent need to improve the survival rate of skin flaps by promoting local angiogenesis. The delivery of growth factor loaded microcarriers have shown promise in enhancing defect repair, however, their rapid clearance from the defect site limits their regenerative potential. Thus, it is critical to develop microcarriers which can promote the sustained release of bioactive factors to effectively stimulate tissue repair. This study aimed to develop a stromal cell-derived factor 1 (SDF-1) loaded microcarrier coated with Matrigel (MC@SDF-1@Mat) to promote skin flap repair. SEM imaging showed that the surface of the microcarrier was coated by a porous Matrigel film. The drug release experiment showed that the Matrigel-coated microcarriers enhanced the sustained release of the model drug methylene blue when compared to uncoated group. MC@SDF-1@Mat significantly promoted the proliferation, migration, and angiogenesis of HUVECs via CCK-8, wound healing assay, and tube formation assay, respectively. Moreover, the murine random skin flap model was further established and treated. It was found that the flap necrosis area in the MC@SDF-1@Mat treated group was significantly reduced. H&E and Masson staining showed the histological structure and collagen organization exhibited a normal phenotype in the MC@SDF-1@Mat treated group. Additionally, CD31 immunohistochemical analysis showed that the MC@SDF-1@Mat treated group exhibited the greatest degree of neovascularization. In conclusion, our SDF-1 functionalized gelatin-based hydrogel microcarrier has potential clinical applications in promoting skin flap repair and drug delivery.

Mesenchymal stem cells plus bone repair materials as a therapeutic strategy for abnormal bone metabolism: Evidence of clinical efficacy and mechanisms of action implied

The regeneration process of human bones is very complicated, the management and treatment of bone damage caused by diseases are the main problems faced by clinicians worldwide. It is known that cell-based stem cell therapy together with biomaterials is a fast-developing method of tissue regeneration. This review focuses on the different types and main characteristics of scaffolds and stem cells suitable for bone regeneration, and aims to provide a state-of-the-art description of the current treatment of common bone metabolism related diseases such as osteoarthritis, osteoporosis and osteosarcoma and the strategies based on stem cell biological scaffolds used in bone tissue engineering. This method may provide a new treatment option for the treatment of common bone metabolism-related diseases that cannot be cured by ordinary and routine applications. Three databases (PubMed, CNKI and Web of Science) search terms used to write this review are: "arthritis", "osteoporosis", "osteosarcoma", "bone tissue engineering", "mesenchymal stem cells", "materials", "bioactive scaffolds" and their combinations, and the most relevant studies are selected. As a conclusion, it needs to be emphasized that despite the encouraging results, further development is needed due to the need for more in-depth research, standardization of stem cell manufacturing processes, large-scale development of clinical methods for bone tissue engineering, and market regulatory approval. Although the research and application of tissue regeneration technology and stem cells are still in their infancy, the application prospect is broad and it is expected to solve the current clinical problems.

Failure and progression to total hip arthroplasty among the treatments for femoral head osteonecrosis: a Bayesian network meta-analysis

INTRODUCTION

Osteonecrosis of the femoral head (ONFH) often leads to secondary osteoarthritis and total hip arthroplasty.

SOURCE OF DATA

Recent published literatures.

AREAS OF AGREEMENT

There has been increasing focus on the early intervention in ONFH patients to preserve the native hip articulation, reduce pain and improve function.

AREAS OF CONTROVERSY

Efficacy of surgical strategies for ONFH is debated. Several clinical studies showed controversial results, and the best treatment has not yet been clarified.

GROWING POINTS

To provide an overview over current treatment options for ONFH compares their failure rates and conversion to total hip arthroplasty (THA) rates.

AREAS TIMELY FOR DEVELOPING RESEARCH

Core decompression (CD) augmented with autologous bone grafting plus the implantation of bone marrow concentrate can decrease the rate of failure and progression to THA rates compared to CD alone.

Transforming Growth Factor-β3/Recombinant Human-like Collagen/Chitosan Freeze-Dried Sponge Primed With Human Periodontal Ligament Stem Cells Promotes Bone Regeneration in Calvarial Defect Rats

Patients with a skull defect are at risk of developing cerebrospinal fluid leakage and ascending bacterial meningitis at >10% per year. However, treatment with stem cells has brought great hope to large-area cranial defects. Having found that transforming growth factor (TGF)-β3 can promote the osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs), we designed a hybrid TGF-β3/recombinant human-like collagen recombinant human collagen/chitosan (CS) freeze-dried sponge (TRFS) loading hPDLSCs (TRFS-h) to repair skull defects in rats. CFS with 2% CS was selected based on the swelling degree, water absorption, and moisture retention. The CS freeze-dried sponge (CFS) formed a porous three-dimensional structure, as observed by scanning electron microscopy. In addition, cytotoxicity experiments and calcein-AM/PI staining showed that TRFS had a good cellular compatibility and could be degraded completely at 90 days in the implantation site. Furthermore, bone healing was evaluated using micro-computed tomography in rat skull defect models. The bone volume and bone volume fraction were higher in TRFS loaded with hPDLSCs (TRFS-h) group than in the controls (p < 0.01, vs. CFS or TRFS alone). The immunohistochemical results indicated that the expression of Runx2, BMP-2, and collagen-1 (COL Ⅰ) in cells surrounding bone defects in the experimental group was higher than those in the other groups (p < 0.01, vs. CFS or TRFS alone). Taken together, hPDLSCs could proliferate and undergo osteogenic differentiation in TRFS (p < 0.05), and TRFS-h accelerated bone repair in calvarial defect rats. Our research revealed that hPDLSCs could function as seeded cells for skull injury, and their osteogenic differentiation could be accelerated by TGF-β3. This represents an effective therapeutic strategy for restoring traumatic defects of the skull.

Porous polyetheretherketone microcarriers fabricated via hydroxylation together with cell-derived mineralized extracellular matrix coatings promote cell expansion and bone regeneration

Porous microcarriers have aroused increasing attention recently by facilitating oxygen and nutrient transfer, supporting cell attachment and growth with sufficient cell seeding density. In this study, porous polyetheretherketone (PEEK) microcarriers coated with mineralized extracellular matrix (mECM), known for their chemical, mechanical and biological superiority, were developed for orthopedic applications. Porous PEEK microcarriers were derived from smooth microcarriers using a simple wet-chemistry strategy involving the reduction of carbonyl groups. This treatment simultaneously modified surface topology and chemical composition. Furthermore, the microstructure, protein absorption, cytotoxicity and bioactivity of the obtained porous microcarriers were investigated. The deposition of mECM through repeated recellularization and decellularization on the surface of porous MCs further promoted cell proliferation and osteogenic activity. Additionally, the mECM coated porous microcarriers exhibited excellent bone regeneration in a rat calvarial defect repair model in vivo, suggesting huge potential applications in bone tissue engineering.

Multiomics analyses of cytokines, genes, miRNA, and regulatory networks in human mesenchymal stem cells expanded in stirred microcarrier-spinner cultures

Mesenchymal stem cells (MSCs) are of great clinical interest as a form of allogenic therapy due to their excellent regenerative and immunomodulatory effects for various therapeutic indications. Stirred suspension bioreactors using microcarriers (MC) have been used for large-scale production of MSCs compared to planar cultivation systems. Previously, we have demonstrated that expansion of MSCs in MC-spinner cultures improved chondrogenic, osteogenic, and cell migration potentials as compared to monolayer-static cultures. In this study, we sought to address this by analyzing global gene expression patterns, miRNA profiles and secretome under both monolayer-static and MC-spinner cultures in serum-free medium at different growth phases. The datasets revealed differential expression patterns that correlated with potentially improved MSC properties in cells from MC-spinner cultures compared to those of monolayer-static cultures. Transcriptome analysis identified a unique expression signature for cells from MC-spinner cultures, which correlated well with miRNA expression, and cytokine secretion involved in key MSC functions. Importantly, MC-spinner cultures and conditioned medium showed increased expression of factors that possibly enhance pathways of extracellular matrix dynamics, cellular metabolism, differentiation potential, immunoregulatory function, and wound healing. This systematic analysis provides insights for the efficient optimization of stem cell bioprocessing and infers that MC-based bioprocess manufacturing could improve post-expansion cellular properties for stem cell therapies.

Influence of Microenvironment on Mesenchymal Stem Cell Therapeutic Potency: From Planar Culture to Microcarriers

Human mesenchymal stem cells (hMSCs) are a promising candidate in cell therapy as they exhibit multilineage differentiation, homing to the site of injury, and secretion of trophic factors that facilitate tissue healing and/or modulate immune response. As a result, hMSC-derived products have attracted growing interests in preclinical and clinical studies. The development of hMSC culture platforms for large-scale biomanufacturing is necessary to meet the requirements for late-phase clinical trials and future commercialization. Microcarriers in stirred-tank bioreactors have been widely utilized in large-scale expansion of hMSCs for translational applications because of a high surface-to-volume ratio compared to conventional 2D planar culture. However, recent studies have demonstrated that microcarrier-expanded hMSCs differ from dish- or flask-expanded cells in size, morphology, proliferation, viability, surface markers, gene expression, differentiation potential, and secretome profile which may lead to altered therapeutic potency. Therefore, understanding the bioprocessing parameters that influence hMSC therapeutic efficacy is essential for the optimization of microcarrier-based bioreactor system to maximize hMSC quantity without sacrificing quality. In this review, biomanufacturing parameters encountered in planar culture and microcarrier-based bioreactor culture of hMSCs are compared and discussed with specific focus on cell-adhesion surface (e.g., discontinuous surface, underlying curvature, microcarrier stiffness, porosity, surface roughness, coating, and charge) and the dynamic microenvironment in bioreactor culture (e.g., oxygen and nutrients, shear stress, particle collision, and aggregation). The influence of dynamic culture in bioreactors on hMSC properties is also reviewed in order to establish connection between bioprocessing and stem cell function. This review addresses fundamental principles and concepts for future design of biomanufacturing systems for hMSC-based therapy.

Three-Dimensional Culture of Umbilical Cord Mesenchymal Stem Cells Effectively Promotes Platelet Recovery in Immune Thrombocytopenia

Mesenchymal stem cells (MSCs) can effectively regulate immune cell functions and therefore are promising for the treatment of autoimmune disorders, such as immune thrombocytopenia (ITP). Recent research has shown that three-dimensional (3D) culture method have many advantages over conventional culture with respect to MSC secretion and immunogenicity. In this study, 2D and 3D cultured MSCs were used to evaluate cytokine secretion, extracellular matrix (ECM) gene expression, immune regulatory activity, and therapeutic effects in a mouse model of ITP. MSCs cultured on scaffolds had higher expression levels of immune regulatory genes, such as IDO1, HLA-G, and PTGS2, and greater inhibitory activity against lymphocyte activation that those of 2D-MSCs. In addition, 3D-MSCs exhibited higher ECM expression and greater protection against interferon-γ (IFN-γ)-induced apoptosis. In a mouse study, ITP was induced by guinea pig anti-mouse platelet serum injections. Based on enzyme-linked immunosorbent assays, serum levels of the suppressive cytokine interleukin (IL)-10 were higher and IFN-γ levels were lower after intravenous injection with 3D-MSCs and with 2D-MSCs. Additionally, 3D-MSCs improved the body weight, spleen index, and platelet index relative to those for 2D-MSCs. Bone marrow homing was also significantly enhanced in the 3D group. Therefore, the 3D culture of MSCs is an effective technique for the treatment of ITP.