Inhibition of hybrid layer degradation by cavity pretreatment: Meta- and trial sequential analysis

Evidence-based fact checking for selective procedures in restorative dentistry

OBJECTIVES

Similar to other dental specialties, there are many clinical procedures in restorative dentistry that may or may not be supported by good evidence. Thus, the effectiveness of these procedures is uncertain. The aim of this paper is to reduce this knowledge gap by critically inspecting selective procedures in restorative dentistry and exploring if these well-established or widely advocated treatment modalities are necessary for improving treatment outcomes based on the best available evidence.

MATERIALS AND METHODS

A MEDLINE search was conducted to identify research on selective procedures while focusing on clinical trials and systematic reviews. Due to their practical relevance in the decision-making process, cost-effectiveness analyses were also included.

RESULTS

Mixed results were identified regarding the included interventions. Some procedures had adequate evidence supporting them while others were mostly based on beliefs.

CONCLUSIONS

A critical review of the available literature indicates that some common restorative procedures lack adequate support from high-quality research evidence.

CLINICAL RELEVANCE

This paper attempts to highlight the need to critically examine the scientific validity of traditional knowledge and techniques through the context of current research evidence. This will not only help generate consensus between educators, clinicians, and researchers regarding restorative procedures but will also lead to improved patient care and outcomes.

Adjunctive therapies for in vitro carious lesions: Antimicrobial activity, activation of dentin metalloproteinases and effects on dental pulp cells

BACKGROUND

Adjunctive therapies used before dental restorative procedures may encourage carious tissue removal. Beyond promising antimicrobial properties, treatments could positively modulate the dentin-pulp complex while not interfering with restoration survival. Herein, we evaluated a set of substances and their effects on carious lesions and the underlying dentin or pulp cells.

METHODS

Artificial caries lesions were developed in bovine teeth cavities immersed in Streptococcus mutans and Lactobacillus casei co-cultures. The cavities were treated according to the following groups: Phosphate Buffer Saline (PBS), Chlorhexidine (CHX), Papacárie® (Papain gel), Ozone (O₃), and antimicrobial Photodynamic Therapy (aPDT). After treatments, samples were cultivated to count isolated microbial colonies. The zymography assay evaluated the activity of dentin metalloproteinases (MMP-2 and MMP-9). Cell viability was indirectly assessed on human dental pulp cells after 24, 72, or 120 h, whereas the odontodifferentiation potential was evaluated after ten days of cell culture.

RESULTS

CHX and aPDT led to around 1 log bacterial load reduction. PBS, CHX, and aPDT showed the eventual expression of MMP-2 and MMP-9. Cell viability was reduced (< 30%) after 120 h for all groups compared to the control. CHX, O3, and aPDT induced greater odontodifferentiation (≈ 20% higher) than PBS and papain gel.

CONCLUSION

Adjunctive therapies presented little or no biological significance in reducing bacterial load in artificial carious lesions. Although the activation of endogenous metalloproteinases may represent a possible concern for adhesive restorations, some of these treatments may have a positive role in dental pulp tissue repair.

Collagen-depletion strategies in dentin as alternatives to the hybrid layer concept and their effect on bond strength: a systematic review

Strategies aiming to improve the longevity of resin-dentin adhesive interface developed so far have only been able to retard the problem. Different approaches are thus needed. The objective of this review was to determine whether the use of collagen-depletion strategies after acid-etching procedures may improve the bond strength of resin-based materials to dentin. A systematic review was planned following 2021 PRISMA statement guidelines, with a search strategy performed in five electronic databases: PubMed/Medline, Scopus, EMBASE, SciELO and IADR Abstract Archive (last search: 17/01/2022). Inclusion criteria encompassed studies which evaluated a collagen-depletion strategy in acid-etched human dentin and tensile/shear bond strength tests. Risk of bias assessment was carried out by two reviewers, working independently on an adapted five-domain risk of bias (RoB) checklist for laboratory studies. Results were synthesized qualitatively, as a meta-analysis was not possible due to limited number of studies and their RoB. A total of eight studies were eligible for inclusion in the systematic review after inclusion/exclusion criteria application. Out of these, two evaluated the effect of using NaOCl followed by an antioxidant, and the remaining six evaluated different enzymatic treatments (bromelain, chondroitinase ABC, papain, and trypsin). None of the studies reported a decrease of bond strength when a collagen-depletion strategy was used, in comparison to traditional hybrid layers (control). All enzymatic treatment studies which respected the inclusion criteria improved the bond strength to dentin. Some specific collagen-depletion strategies seem to play a favorable role in improving immediate bond strengths to dentin. Further research with sound methodology is required to consolidate these findings, since limitations in RoB and a low number of studies were found. The assessment of further proteolytic agents and long-term outcomes is also required.

NaOCl Application after Acid Etching and Retention of Cervical Restorations: A 3-Year Randomized Clinical Trial

This study evaluated the retention of composite resin restorations in noncarious cervical lesions (NCCLs) performed with or without pretreatment with 10% NaOCl solution (deproteinization). A randomized, controlled, split-mouth, doubleblinded trial was carried out. Thirty patients with at least two NCCLs were included in the study. The NCCLs were randomly allocated into two treatment groups: control (acid etching with 37% phosphoric acid + placebo solution + Adper Single Bond 2/3M Oral Care + Filtek Z350/3M Oral Care) or experimental group (acid etching with 37% phosphoric acid + 10% NaOCl solution + Adper Single Bond 2 + Filtek Z350). A calibrated examiner evaluated the restorations at baseline (1 week) and recalls (6, 12, 24, and 36 months) using the FDI criteria. The primary outcome evaluated was retention of the restorations. Data were analyzed by the Kaplan-Meier method and the log-rank test (α=0.05). After 3 years, 64 restorations were evaluated in 23 patients. The annual failure rate was 9% for the control group and 17.8% for the experimental group (deproteinization technique). Considering the failures and their distribution among the characteristics of the patients and NCCLs, no statistically significant differences were observed for the control and experimental treatment groups (p=0.077) or the number of teeth in the mouth (p=0.320). Restorations in the mandible (p=0.039) and premolars (p=0.013) showed significantly lower clinical survival rates. The deproteinization pretreatment with a 10% NaOCl solution did not promote additional retention of restorations in NCCLs. (clinicaltrials. gov: NCT03086720).

Biomimetic Growth of Metal-Organic Frameworks for the Stabilization of the Dentin Matrix and Control of Collagenolysis

The dentin matrix is a collagenous scaffold structurally involved in anchoring resin-based materials to the tooth. Time-dependent degradation of this scaffold at the resin-dentin interface remains a core problem in adhesive dentistry, limiting the service life of dental fillings. This study explored the use of emergent materials termed metal-organic frameworks (MOFs)─formed by the self-assembly of metal ions and organic building blocks─to safeguard the collagen integrity in the functional dentin matrix. We demonstrate that collagen fibrils (from demineralized human dentin) can induce the biomimetic growth of MOF crystals as protective coatings to strengthen and stabilize the fibrils. Zeolitic imidazolate framework-8 (ZIF-8), a zinc-based microporous MOF, was used to fabricate the MOF composites via a "one-pot" reaction in water. The ZIF-modified dentin matrix presented superior mechanical strength and resistance to proteolysis, which can positively affect the longevity of collagen as an anchoring substrate. This work identifies a potential biomedical application of biomimetically synthesized MOFs in repairing dental tissues critical to restorative therapies.

A Contemporary Evaluation on Posterior Direct Restoration Teaching among Undergraduates in Dental Schools in Malaysia

There is a current trend to restore posterior teeth with composite resin due to increasing demands on natural tooth colour restoration and increased concern about the safety of amalgam restorations. The objective was to evaluate the current teaching of posterior direct restoration among restorative dental lecturers in Malaysia compared to available international literature. An online questionnaire, which sought information on the teaching of posterior restoration was developed and distributed to 13 dental schools in Malaysia. The response rate for the questionnaire was 53.8%. The most popular posterior restoration teaching methods among the respondents were lecture (95.7%), demonstration (87.0%) and problem-based learning (PBL) (73.9%), while continuous assessment and a practical competency test (82.6%) were the most popular assessment methods. Placing a hard setting calcium hydroxide and GIC base for deep cavity restored by composite restoration was taught in 79.2% of cases. The standard protocols for posterior composite restoration were incremental filling in deep cavity (87.5%), using circumferential metal bands with wooden wedge (91.7%), with a total etch system (95.8%), using a light emitting diode (LED) light curing unit (91.7%), finishing using water cooling (80%) and finishing with a disc (87.5%). Graduates from dental schools in Malaysia received similar theoretical, preclinical and clinical teaching on posterior restoration techniques, although there were variations in the delivery methods, techniques and assessments, pointing to a need for uniformity and consensus.

Two-year randomized clinical trial of different restorative techniques in non-carious cervical lesions and MMP activity in gingival crevicular fluid

OBJECTIVES

To evaluate different restorative techniques for non-carious cervical lesions (NCCLs) and the activity of matrix metalloproteinases (MMPs) in gingival crevicular fluid.

MATERIALS AND METHODS

Two hundred restorations were performed in 50 patients using resin composite restorative system without (I) and with selective enamel conditioning (II) and resin-modified glass-ionomer cement without (III) and with EDTA pretreatment (IV). Gingival crevicular fluid samples were collected in 15 patients. Restorations were evaluated using USPHS criteria at baseline and after 2 years. Percentages of MMP activity were assessed by zymography as a surrogate outcome. Equality tests of two proportions, logistic regression analysis, survival analysis, ANOVA repeated measures, and Fisher tests were used.

RESULTS

No differences in clinical performance were found among groups. Group I had lower retention at 2 years than at baseline. Decreased alpha scores for marginal integrity and marginal discoloration were observed for all groups after 2 years. MMP-2 decreased after 1 year, and its activity increased back to the initial level after 2 years, mainly for groups I, II, and III. MMP-9 increased after 1 year, and it was reduced to the initial level after 2 years, mainly for group I.

CONCLUSIONS

All restorative techniques performed similarly in NCCLs after 2 years with initial marginal defect alterations. MMP-2 reestablished its initial levels after 2 years, and MMP-9 had few alterations over time in crevicular fluid. Clinical relevance The different restorative techniques are equally successful in NCCLs after 2 years of clinical functioning and have similar effects on MMPs present in crevicular fluid.

Evaluation of Stabilized Chlorine Dioxide in Terms of Antimicrobial Activity and Dentin Bond Strength

BACKGROUND

Antimicrobial agents are recommended for disinfection of the cavity following mechanical dental caries removal prior to application of restorative material. There is limited information about stabilized chlorine dioxide (ClO2) as a cavity disinfectant.

OBJECTIVE

The objective of this study is to determine the antimicrobial activity and effect on dentin bond strength of ClO2 compared to chlorhexidine digluconate (CHX), sodium hypochlorite (NaOCl) and ethanolic propolis extract (EPE).

METHODS

Antimicrobial activities of agents against oral pathogens (Staphylococcus aureus, Enterococcus faecalis, Streptococcus mutans, Lactobacillus acidophilus, Lactobacillus casei, Candida albicans, and Saccharomyces cerevisiae) and analyses of EPE were examined. Seventy-five mandibular third molars were sectioned, prepared and divided into five subgroups (n=15/group). Cavity disinfectants (2% CHX, 2.5% NaOCl, 30% EPE, 0.3% ClO2) were applied to etched dentin prior to adhesive and composite build-up. Shear bond strength (SBS) was evaluated with a universal testing machine at a crosshead speed of 0.5 mm/min. The SBS data were analyzed with one-way analysis of variance (ANOVA) and Tukey's post-hoc test (p <0.05). The failure modes were evaluated with a stereomicroscope.

RESULTS

It was determined that the compared disinfectants were showed different inhibition zone values against oral pathogens. ClO2 exhibited the highest antimicrobial activity, followed by CHX, NaOCI and EPE, respectively. No statistically significant difference was observed in the SBS values between the disinfectant treated groups and control group. The failure modes were predominantly mixed.

CONCLUSION

The use of 0.3% stabilized ClO2 as a cavity disinfectant agent exhibited high antimicrobial activity against oral pathogens and no adverse effects on SBS to etched dentin.

Phenolic extract of Libidibia ferrea inhibits dentin endogenous enzymatic activity depending on the adhesive system strategy

This study evaluated the influence of Libidibia ferrea (Lf) extract used as dentin pretreatment on the resin-dentin bond strength stability and dentin endogenous enzymatic activity. The phytochemical profile (PP) of the Lf extract was evaluated by liquid chromatography; particle size, polydispersity index (PdI), and zeta potential (ZP) were evaluated by dynamic light scattering. The tested groups were ER-Scotchbond Universal (SBU) in the etch-and-rinse (ER) mode; ERLf-SBU in the ER mode + Lf after etching; SE- SBU in the self-etch (SE) mode; and LfSE-Lf before SBU in the SE mode. Sticks were obtained for microtensile bond strength tests and failure mode (24 hr and 12 months). The hybrid layer was evaluated using scanning electron microscopy. The endogenous enzymatic activity of the underlying dentin was analyzed by in situ zymography with the same treatments. The PP showed the presence of quercetin (2.6% w/w). Lf particles were considered large after the analysis of the PdI. The ZP remained stable over time. The ER and ERLf groups had lower bond strength after 12 months, but SE and LfSE remained stable. The predominant failure mode was adhesive for both times. ER and ERLf had longer resin tags and a thicker hybrid layer. The ER and LfSE groups showed higher enzymatic activity than the ERLf and SE groups after 12 months. The Lf extract may contribute to inhibit the dentin endogenous enzymatic activity when associated with an adhesive system in the ER mode.

Effect of a Copaiba Oil-Based Dental Biomodifier on the Inhibition of Metalloproteinase in Adhesive Restoration

Aim

This study sets out to evaluate the antiproteolytic activity of copaiba oil-based emulsion at the resin/dentin adhesive interface union formed with conventional and self-etching adhesives systems.

Methods

At in situ zymography, 30 teeth were sectioned 2 mm below the enamel-dentin junction; a smear layer was standardized and subdivided into four groups. Gelatin conjugated with fluorescein was used and taken to the fluorescence microscope for evaluation. In cytotoxicity, the Trypan Blue method was used at four different time points. The tested groups were (G1) control with distilled water; (G2) 2% chlorhexidine (CLX); (G3) emulsion based on copaiba oil (EC) 10% + X; (G4) 10% EC + Y; and (G5) EC 10% alkaline. The zymographic assay used the same groups described, but in 30 seconds and 10 and 20 minutes. HT1080 cells were incubated and submitted to electrophoresis. The gel was analyzed using ImageJ software. Mann–Whitney and Kruskal–Wallis tests were used in the statistical analysis (p < 0.05).

Results

ECs showed higher cell viability in the cytotoxicity test and showed a significant difference in 10 and 20 minutes. In the zymographic assay, alkaline EC reduced 67% of MMP-2 activity and 44% of MMP-9 compared to 2% chlorhexidine. At in situ zymography in qualitative evaluation, all groups tested showed inhibition of activity in metalloproteinases.

Conclusion

EC showed activity in the inhibition of metalloproteinases in vitro and in situ, especially the alkaline one. The survey shows the possibility of using ECs, a product from Amazonian biodiversity, as a biomodifier in dentistry.

Impact of biomineralization on resin/biomineralized dentin bond longevity in a minimally invasive approach: An "in vitro" 18-month follow-up

OBJECTIVES

To determine the impact of treating caries-affected dentin (CAD) with: 0.2% sodium fluoride (NaF), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP/MI Paste™) or peptide P₁₁-4 (Curodont™ Repair) on the longevity of resin/CAD interface at storage times of 24 -h, 6- and 18-month.

METHODS

255 caries-free third molars were used, and CAD was produced by a biological method. The teeth were randomly distributed into: G1- Sound dentin (SD); G2- CAD; G3- CAD + 0.2% NaF (CAD/NaF); G4- CAD + CPP-ACP (CAD/ACP); G5- CAD + Curodont™ Repair (CAD/P₁₁-4). The Filtek Z350 composite resin block was bonded to dentin using Adper™ Single 2 (4 mm/height). Resin/dentin blocks were stored in a solution of Simulated Body Fluid at 37 °C, pressures were modified to simulate natural pulpal pressures. Specimens were investigated by microtensile bond strength (μTBS) (n = 8), Scanning Electron Microscopy (to assess the failure mode) (n = 8), nanoinfiltration (to assess the interface sealing) (n = 3), in situ zymography (to assess the gelatinolytic activity) (n = 3) and micro-computed microtomography (μ-CT) (to assess the mineralization) (n = 3). Data from μTBS, μ-CT and, nanoinfiltration and hybrid layer formation/degradation were submitted to two-way ANOVA and Tukey tests, and failure patterns and in situ zymography to Kruskal-Wallis and Dunn tests (α = 5%).

RESULTS

The highest mineral density change by μ-CT, smallest silver nitrate infiltration and proteolytic activity in the adhesive layer were obtained significantly for the groups SD, CAD/ACP and CAD/P₁₁-4, with most mixed fractures at 18-month (p < 0.001). CAD/NaF showed significantly similar values to CAD, CAD and CAD/NaF which presented a high percentage of adhesive fracture (p < 0.001) at all time periods.

SIGNIFICANCE

Treating caries-affected dentin with remineralizing agents CPP-ACP and Curodont™ Repair, has the potential to be a clinically relevant treatment protocol to increase the longevity of adhesive restorations.

Adhesive dentistry: Current concepts and clinical considerations

OBJECTIVES

To address contemporary concepts in adhesive dental materials with emphasis on the evidence behind their clinical use.

OVERVIEW

Adhesive dentistry has undergone major transformations within the last 20 years. New dental adhesives and composite resins have been launched with special focus on their user-friendliness by reducing the number of components and/or clinical steps. The latest examples are universal adhesives and universal composite resins. While clinicians prefer multipurpose materials with shorter application times, the simplification of clinical procedures does not always result in the best clinical outcomes. This review summarizes the current evidence on adhesive restorative materials with focus on universal adhesives and universal composite resins.

CONCLUSIONS

(a) Although the clinical behavior of universal adhesives has exceeded expectations, dentists still need to etch enamel to achieve durable restorations; (b) there is no clinical evidence to back some of the popular adjunct techniques used with dental adhesives, including glutaraldehyde-based desensitizers and matrix metalloproteinase inhibitors; and (c) the color adaptation potential of new universal composite resins has simplified their clinical application by combining multiple shades without using different translucencies of the same shade.

CLINICAL SIGNIFICANCE

New adhesive restorative materials are easier to use than their predecessors, while providing excellent clinical outcomes without compromising the esthetic quality of the restorations.

Novel Orthodontic Cement Comprising Unique Imidazolium-Based Polymerizable Antibacterial Monomers

White spot lesions (WSLs) can develop quickly and compromise the successful outcome of the orthodontic treatment. Orthodontic bonding cement with the capability to prevent or mitigate WSLs could be beneficial, especially for patients with high risk of caries. This study explored novel mono- and di-imidazolium-based polymerizable antibacterial monomers and evaluated orthodontic cement compositions comprising such novel monomers. Their antibacterial potentials, mechanical properties, and shear bond strength (SBS) to bovine enamel were investigated. Statistical tests were applied to SBS and mechanical tests (one-way ANOVA and Tukey’s test). For antibacterial resins C (ABR-C) and E (ABR-E), their minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against cariogenic Streptococcus mutans bacterial strain UA159 were found to be 4 μg/mL and 8 μg /mL, respectively. The loss of dry mass from completely demineralized dentin beams in buffer solutions pre-dipped into ABR-C and ABR-E resins is much less than that in control buffer (artificial saliva) only. For unfilled resins comprising up to 12 wt % ABR-C, no significant decreases in flexural strength or modulus were observed. For experimental cements incorporating 1–4 wt % ABR-C, there was no drastic compromise to the SBS to enamel except for 3 wt % ABR-C. Furthermore, their SBS was all comparable to the commercially available orthodontic cements. The ISO-22196 antimicrobial test against S. aureus showed significant levels of antibacterial effects—up to over 5 logs of microorganism reduction exhibited by ABR-C-containing experimental cements. The imidazolium-based polymerizable monomers could be utilized to functionalize orthodontic bonding cement with steady antibacterial activity and develop a potential strategy to counteract WSLs.

Chlorhexidine to improve the survival of ART restorations: A systematic review and meta-analysis

OBJECTIVES

Our aim was to systematically assess the efficacy of chlorhexidine (CHX) as a cavity pre-treatment or restoration mix-in on the survival of ART restorations.

DATA

We included randomized controlled trials that assessed the effect of cavity pretreatment with CHX or the restoration mix-in of CHX on the survival of ART restorations (test group) versus a similar restorative approach without CHX. Risk of bias was assessed using Cochrane's randomized trial quality assessment Tool (RoB 2.0). Random-effects meta-analysis was conducted, with mean Odds Ratios and 95 % confidence intervals (OR, 95 % CI) as effect estimates. The certainty of the evidence was assessed according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) system.

SOURCES

Medline, Web of Science, Cochrane Central were searched. Eligible studies were in- or excluded and data extracted for included studies by two reviewers independently.

STUDY SELECTION

Four studies with 261 patients (mean age 3.8-14.6 years) and 467 ART restorations were included. All studies showed some concerns about the risk of bias. Three studies involving a total of 167 restorations in the CHX group and 188 restorations in the control group, followed up for one year, were submitted to meta-analysis. There were no significant differences between CHX vs. control (OR = 0.79, 95 % CI [0.26, 2.40], P = 0.68, I² = 3%, P = 0.35). The strength of the evidence was estimated as low.

CONCLUSIONS

Based on very limited data, CHX pre-treatment or restoration mix-in did not have any significant benefit for survival of ART restorations.

CLINICAL SIGNIFICANCE

There is a lack of evidence regarding the influence of chlorhexidine on the survival of ART restorations. Our results revealed that there was no significant difference in the survival of ART restorations when CHX was used as a cavity pre-treatment or mix-in.

Current perspectives on dental adhesion: (1) Dentin adhesion - not there yet

The essential goal of any adhesive restoration is to achieve a tight and long-lasting adaptation of the restorative material to enamel and dentin. The key challenge for new dental adhesives is to be simultaneously effective on two dental substrates of conflicting nature. Some barriers must be overcome to accomplish this objective. While bonding to enamel by micromechanical interlocking of resin tags within the array of microporosities in acid-etched enamel can be reliably achieved and can effectively seal the restoration margins against leakage, bonding effectively and durably to organic and humid dentin is the most puzzling task in adhesive dentistry.

Much of the research and development of dental adhesives has focused on making the clinical procedure more user-friendly by reducing the number of bottles and/or steps. Although clinicians certainly prefer less complicated and more versatile adhesive materials, there is a trade-off between simplification of dental adhesives and clinical outcomes. Likewise, new materials are launched with claims of being novel and having special properties without much supporting evidence.

This review article discusses dental adhesion acknowledging pioneer work in the field, highlights the substrate as a major challenge to obtain durable adhesive restorations, as well as analyzes the three adhesion strategies and their shortcomings. It also reviews the potential of chemical/ionic dental adhesion, discusses the issue of extensively published laboratory research that does not translate to clinical relevance, and leaves a few thoughts in regard to recent research that may have implications for future adhesive materials.

Catechin-based Dentin Pretreatment and the Clinical Performance of a Universal Adhesive: A Two-year Randomized Clinical Trial

CLINICAL RELEVANCE

At 24 months, the dentin pretreatment with epigallocatechin-3-gallate did not impair the clinical performance of the adhesive Single Bond Universal regardless of the bonding strategy used.

SUMMARY

Purpose: To evaluate the two-year effect of dentin pretreatment with epigallocatechin-3-gallate (EGCG) on the clinical performance of restorations of noncarious cervical lesions (NCCLs) with Single Bond Universal, applied in two different modes (self-etch and etch-and-rinse).Methods and Materials: In this randomized clinical trial, 33 volunteers were selected, and 156 NCCLs were assigned to four groups: ER, etch-and-rinse; ER-EGCG, 0.1% EGCG dentin pretreatment + etch-and-rinse; SE, self-etch; and SE-EGCG, 0.1% EGCG dentin pretreatment + self-etch. The NCCLs were restored with a nanofilled resin composite and evaluated at baseline and at six, 12, 18, and 24 months using FDI criteria for retention, marginal staining, marginal adaptation, caries, and postoperative sensitivity. Two evaluators were blinded to the treatments performed, and impressions were taken for resin replicas to allow indirect observations. Statistical analyses were performed with Kruskal-Wallis and McNemar tests with a significance level of 5%.Results: Six restorations (one from ER, two from SE, one from ER-EGCG, and two from SEEGCG) were lost at 24 months with no significant differences (p>0.05). The retention rates were 97.0% (ER and ER-EGCG), 94.1% (SE), and 94.2% (SE-EGCG). For marginal adaptation, a significant difference was detected between the baseline and 24 months for the SE group (p=0.0313). There were no statistical differences among all other evaluated criteria at 24 months, neither for each group at baseline nor for 24-month comparisons (p>0.05).Conclusions: The pretreatment with EGCG provided no benefit in the clinical performance of the adhesive regardless of the bonding strategy used. In addition, it adds an additional required step to the restorative procedure.

Resin-dentin bond stability of etch-and-rinse adhesive systems with different concentrations of MMP inhibitor GM1489

Enzymatic degradation of the hybrid layer can be accelerated by the activation of dentin metalloproteinases (MMP) during the bonding procedure. MMP inhibitors may be used to contain this process. Objective To evaluate the degree of conversion (DC%), dentin bond strength (µTBS) (immediate and after 1 year of storage in water), and nanoleakage of an experimental (EXP) and a commercial (SB) adhesive system, containing different concentrations of the MMP inhibitor GM1489: 0, 1 µM, 5 µM and 10 µM. Methodology DC% was evaluated by FT-IR spectroscopy. Dentin bond strength was evaluated by µTBS test. Half of beams were submitted to the µTBS test after 24 h and the other half, after storage for 1 year. From each tooth and storage time, 2 beams were reserved for nanoleakage testing. Data were analyzed using ANOVA and Tukey's test to compare means (α=0.05). Results All adhesive systems maintained the µTBS after 1 year of storage. Groups with higher concentrations of inhibitor (5 µM and 10 µM) showed higher µTBS values than groups without inhibitor or with 1 µM. The nanoleakage values of all groups showed no increase after 1 year of storage and values were similar for SB and EXP groups, in both storage periods. The inhibitor did not affect the DC% of the EXP groups, but the SB5 and SB10 groups showed higher DC% values than those of SB0 and SB1. Conclusions The incorporation of GM1489 in the adhesive systems had no detrimental effect on DC%. The concentrations of 5 µM GM1489 for SB and 5 µM or 10 µM for EXP provided higher μTBS than groups without GM1489, in the evaluation after 1 year of storage; whereas the concentration of inhibitor did not affect adhesive systems nanoleakage.

Atraumatic vs conventional restorative treatment for root caries lesions in older patients: Meta- and trial sequential analysis

OBJECTIVES

We aimed to appraise the comparative clinical efficacy of atraumatic restorative treatment (ART) versus conventional restorative treatment (CT) using a meta-analysis, and assessed the robustness of evidence by trial sequential analysis (TSA).

BACKGROUND

Due to its simplified clinical approach, ART may be advantageous over CT for restoration of root caries lesions in institutionalised older patients.

METHODS

Three electronic databases (PubMed, Embase and Cochrane CENTRAL) were screened, and hand searches and cross-referencing performed to identify randomised controlled trials reporting on survival of ART vs CT for restoration of root caries in older patients. Trial selection, data extraction and risk of bias assessment were performed by two independent reviewers. ART and CT were compared using fixed- or random-effects pairwise meta-analysis for per-protocol (PP), intention-to-treat (ITT) and best-case scenarios. TSA was used to control for risk of random errors.

RESULTS

A total of 235 studies were identified, and three trials involving 130 patients (463 restorations) were included. Risk of bias was high or moderate in all but one trial. ART was associated with a significantly increased risk of failure (OR [95% CI] 2.06 [1.06/4.00]) in PP- but not in ITT analysis (1.36 [0.92/2.02]). Analyses for best-case scenarios found great uncertainty introduced by attrition. No firm evidence was reached according to TSA.

CONCLUSIONS

For restoration of root caries, there is insufficient data to clearly rule out whether differences between ART and CT exist. Limited available data indicate there might be an increased risk of failure for ART.

Inhibition of dentin matrix-bound cysteine cathepsins by potassium fluoride

Matrix metalloproteinases (MMPs) and cysteine cathepsins (CCs) can break down unprotected type I collagen fibrils in dentin matrix. This study investigated the use of potassium fluoride (KF) as a potential inhibitor of MMPs and CCs in dentin. Demineralized dentin beams were divided into groups (n = 10 in each group) and incubated in artificial saliva (AS, control), either alone or with one of seven concentrations of KF (6-238 mM fluoride) for 1, 7, and 21 d. After 21 d, all groups were further aged in AS for 6 months. Total MMP activity was screened using the colorimetric MMP assay. The activities of MMP-2 and MMP-9 were investigated using gelatin zymography. At the end of each incubation, changes in loss of dry mass and CC-mediated or total dissolution of collagen peptides were measured via precision weighing, C-terminal crosslinked telopeptide of type I collagen (CTX), and hydroxyproline (HYP) assays. The beams were examined using scanning electron microscopy. After 21 d, total MMP activities, dry mass loss, and CTX release for the groups exposed to 179 and 238 mM fluoride were significantly lower compared with the control group. After 6 months, all groups showed similar total MMP activity, dry mass loss, and HYP release, and CTX levels were significantly lower when the fluoride concentration was ≥24 mM. Calcium fluoride (CaF₂ )-like precipitates were observed over the beams. In summary, KF significantly inhibited the catalytic activity of dentin matrix-bound CCs but did not seem to be effective for MMP-mediated activity.

Effect of Baicalein on Matrix Metalloproteinases and Durability of Resin-Dentin Bonding

OBJECTIVE

In an attempt to increase resin-dentin bonding quality, this study used baicalein as a preconditioner in an etch-and-rinse adhesive to evaluate its effect on matrix metalloproteinases (MMPs) and adhesive durability.

METHODS

As a MMP inhibitor and potential collagen cross-linking agent, baicalein was used as a preconditioner in an etch-and-rinse adhesive system. The degree of conversion was evaluated by Fourier-transform infrared spectroscopy. EnzChek gelatinase/collagenase assay kits were then used to detect the MMP inhibitory effect of different concentrations of baicalein (0.1, 0.5, 2.5, and 5.0 μg/mL) on dentin powders. During in vitro bonding procedures, flat dentin surfaces on sound third molars were preconditioned with 2.5 μg/mL baicalein after being acid-etched; this step was followed by continuation of adhesive processes and build-up of resin composite. After resin-dentin stick preparation, bonding strength, failure mode, and interface nanoleakage were respectively evaluated via microtensile testing, stereomicroscopy, and field emission scanning electron microscopy either immediately or after storage in artificial saliva for three or six months. Data were analyzed by two-way analysis of variance and Tukey test (α=0.05).

RESULTS

Baicalein at a concentration of 0-5.0 μg/mL did not influence the conversion of adhesives. However, it inhibited the activities of dentin-bond gelatinase and collagenase, especially at a concentration of 2.5 μg/mL, while effectively increasing microtensile bonding strength and decreasing nanoleakage in vitro, both immediately and after aging.

CONCLUSIONS

Baicalein used as preconditioner in an etch-and-rinse adhesive system has an anti-MMP function and effectively improves resin-dentin bonding durability in vitro, which has potential value in clinical bonding procedures.

Effectiveness of pre-treatment with chlorhexidine in restoration retention: A 36-month follow-up randomized clinical trial

OBJECTIVES

This study evaluated the effect of the pre-treatment with 2% chlorhexidine digluconate (CHX) as coadjutant in restoration retention of noncarious cervical lesions (NCCL), after 36 months of follow-up.

METHODS

A randomized controlled split-mouth and triple-blind (operators, patients and evaluator) trial was carried out. Patients (n=42) with at least two non-carious cervical lesions were included. The teeth with NCCL were randomly assigned to two treatment groups: application of 2% CHX (experimental group) or a placebo solution (control group) for 60s after acid etching and before the adhesive application. A trained and calibrated examiner evaluated the restorations at baseline (1 week) and at each recall (6, 12, 24 and 36 months) using the FDI criteria. A total of 225 restorations were evaluated after 36-month follow-up. Data were subjected to survival analysis using the Kaplan-Meier method, and the log-rank test was used to evaluate the existence of differences between the survival curves (α=0.05).

RESULTS

The restorations survival rate after 36 months of follow-up was 76.1%. There was no difference in the retention and failure rates between the experimental and the control group (p=0.968). There was an increased failure trend when restorations were located subgingival compared to those at the gingival level or supragingival.

CONCLUSION

The pre-treatment with 2% chlorhexidine digluconate did not promote further restoration retention of noncarious cervical lesions.

CLINICAL SIGNIFICANCE

The cavity pre-treatment with chlorhexidine for inhibition of hybrid layer degradation does not add any beneficial effect to the clinical performance of restorations.