Complete rehabilitation of compromised full dentitions with adhesively bonded all-ceramic single-tooth restorations: Long-term outcome in patients with and without amelogenesis imperfecta

Dental treatment approaches of amelogenesis imperfecta in children and young adults: A systematic review of the literature

OBJECTIVE

The aim of this review was to compare various types of restorations used in children and young adults affected with amelogenesis imperfecta (AI) to determine the most effective restorative treatment.

METHODS

This systematic review included randomized controlled trials, retrospective and prospective cohorts conducted on children and young adults diagnosed with amelogenesis imperfecta and written in French or English. A systematic search was conducted using four databases, namely Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE via PubMed, Science Direct and Scopus, using a selection of MeSH terms: "Amelogenesis Imperfecta," "Therapeutics," "Treatment Outcome," "Adult, young," "Child," "Dental Restoration, Permanent," "Dental Restoration, Temporary," and "Esthetics, Dental."

RESULTS

Out of 138 articles identified in the initial search, four articles met all the inclusion criteria. The results showed that ceramic restorations had better quality scores and longevity compared to other restorations.

CONCLUSION

Ceramic restorations could be considered the restorative treatment modality of choice for AI-affected children and young adults. However, more high-quality clinical trials involving young patients affected with AI are required to evaluate and compare the outcomes of different restorative approaches.

CLINICAL SIGNIFICANCE

Young patients affected with amelogenesis imperfecta usually suffer from low self-esteem, psychological problems and social avoidance, caused by the alteration of teeth such as discoloration, sensitivity, fractures and reduced size. For the dentist, selecting the appropriate restorative treatment for AI in young patients could be a veritable challenge. Therefore, it is important to have an evidence-based modality. For this reason, in this review, the different restorative approaches used in AI-affected young patients were compared to recommend the most effective treatment.

Lithium disilicate occlusal surfaces on acrylic resin denture teeth in a mandibular implant-retained overdenture opposed by a maxillary removable complete denture: A clinical report

Decreased masticatory efficiency, loss of vertical dimension of occlusion, and loss of maxillomandibular relationships are common in relation to the wear experienced by the artificial teeth in removable complete dentures and implant-retained overdentures. To prevent early surface loss, the occlusal surfaces of acrylic resin denture teeth were replaced with adhesively luted lithium disilicate onlays in this patient's prostheses.

Numerical Study of the Mechanical Behaviour of Wedge-Shaped Defect Filling Materials

This paper deals with direct restorations of teeth with non-carious cervical lesions (NCCL). NCCL defects are capable of gradual growth and are accompanied by the degradation of the surrounding tissue. Direct restorative treatment, in which the cavity is filled with a cementing agent, is considered to be an accessible and common treatment option. The study included simulations of the teeth without lesions, the teeth with V and U lesions and the tooth-restorative system. Parameterised numerical tooth models were constructed. Two cases with defect depths of 0.8 mm and ~1.7 mm and three variants with fillet radii of the defect end of 0.1, 0.2 and 0.3 mm were considered. The effect of two biomaterials for restorations was studied, namely Herculite XRV (Kerr Corp, Orange, CA, USA) and Charisma (Heraeus Kulzer GmbH, Hanau, Germany). The models were deformed with a vertical load of 100 to 1000 N from the antagonist tooth. The tooth-restorative system was considered, taking into consideration the contact interaction in the interface areas with the tooth tissues. Within the limits of the research, the character of the distribution of the deformation characteristics and their dependence on the level of loading, the depth of the defect and the radius of the curvature of the "wedge" were established.

Oral health-related impact profile of patients treated with fixed, removable, and telescopic dental prostheses in student courses-a prospective bicenter clinical trial

Objectives

To analyze the oral health-related impact profile in patients treated with three different types of dental prosthesis in student courses.

Materials and Methods

This prospective bicenter clinical trial was conducted with 151 patients being treated with fixed (n = 70), removable (n = 61), or telescopic dental prostheses (n = 20) in clinical student courses of two German universities from October 2018 to October 2019. All patients completed three standardized German versions of the Oral Health Impact Profile (OHIP-G49/53) before prosthetic treatment (T0), at control after 1 week (T1), and after 3 months (T2), divided into five dimensions: (a) appearance, (b) oral function, (c) psychosocial impact, (d) linguistic limitations, and (e) orofacial pain. Data were analyzed with Kolmogorov–Smirnov, Wilcoxon signed-rank, Kruskal–Wallis, Mann–Whitney, and Cronbach’s alpha tests.

Results

Within T0–T1 and T0–T2, greater improvements were determined for removable compared with fixed dental prostheses for the dimensions’ oral function (p ≤ 0.014), linguistic limitations (p ≤ 0.016), and appearance (p ≤ 0.003). No significant differences were found between fixed and telescopic dental prostheses (p ≥ 0.104) or between removable (partial dental prosthesis with clasps and complete dental prosthesis) and telescopic dental prostheses (p ≥ 0.100). Within T1–T2, a significant improvement in orofacial pain could be determined (p = 0.007).

Conclusions

Restorations presented an improvement in oral health-related quality of life. Removable dental prostheses showed better improvement than fixed ones in various dimensions.

Clinical relevance

Knowledge about the influence of oral health-related quality of life on the three different types of prosthesis used in student courses can be of decisive help in dental consultations.

Contemporary full-mouth rehabilitation using a digital smile design in combination with conventional and computer-aided design/manufacturing restorative materials in a patient with bruxism: A case report

RATIONALE

Full-mouth rehabilitation of patients with bruxism and severely worn dentition poses a great challenge to clinicians. Several treatment planning methods and restorative materials are used to treat tooth wear in modern dentistry. Clinicians should be able to select the most suitable treatment planning methods and materials for individual patients depending on their specific situation.

PATIENT CONCERNS

A 47-year-old male was referred for evaluation of a severely worn dentition.

DIAGNOSES

Clinical and radiographic evaluation revealed tooth wear in the entire dentition. The interocclusal distance at rest was 4 mm, and the patient had a parafunctional habit of bruxism.

INTERVENTIONS

A digital smile design was used to formulate a treatment plan. Full-mouth rehabilitation was performed using a combination of conventional and digital materials and methods.

OUTCOMES

The full-mouth restoration showed satisfactory functions and esthetics. No complications were observed in the restorations, supporting tissues, and temporomandibular joints during 2-year follow-up.

LESSONS

In clinical practice, it is important to determine the optimal combination of the available methods for treatment planning. This case report details the formulation of a unique treatment plan for the dental rehabilitation of a severely worn out dentition, which is considered challenging due to the limitations imposed by biological tissues and restorative materials. The use of conventional and digital tools for treatment planning, patient education, and treatment execution was demonstrated.

Retrospective study of patients with amelogenesis imperfecta treated with different bonded restoration techniques

Objective

The aim of this retrospective study was to evaluate clinical success and satisfaction of patients with amelogenesis imperfecta treated with three different types of bonded restorations at a university clinic.

Materials and Methods

One hundred fifty‐four restorations in 15 subjects with mean age of 17.3 years (SD 8.2) were evaluated after treatment with three different types of bonded restorations: all ceramic enamel‐dentin bonded restorations, prefabricated composite veneers, and direct composite resin restorations. A modified version of the Californian Dental Association system for quality evaluation of dental care and a questionnaire assessing patient satisfaction were used for classification. The restorations were evaluated with respect to patient satisfaction, esthetics, technical, and biological complications.

Results

Mean observation period for the restorations was 42.5 months (SD 35.6). All restorations were in place at the time of the examination. Surface and color calibration showed a success of 95% for the ceramic enamel‐dentin bonded restorations, 44% for the direct composite resin restorations, and 0% for the prefabricated composite veneers. The same pattern was evident for anatomy and marginal integrity. The subjects reported a high degree of satisfaction with both the esthetics and function of their restorations.

Conclusion

The results indicated that all ceramic restorations demonstrated the best results for patients with amelogenesis imperfecta.

Clinical performance of occlusal onlays made of lithium disilicate ceramic in patients with severe tooth wear up to 11 years

OBJECTIVES

Evaluation of survival and complication rate of monolithic occlusal onlays made of lithium disilicate ceramic used in patients with severe tooth wear up to 11years of clinical service.

METHODS

In a prospective non-randomized clinical study 7 patients (4 male, 3 female; median age: 44.3±6.56years old) were restored full mouth with a total of 103 adhesively bonded occlusal onlays made of lithium disilicate ceramic (IPS e.max Press, Ivoclar Vivadent, Schaan, Liechtenstein). All restorations were examined during annual recall visits using periodontal parameters according to the modified United States Public Health Service (USPHS) criteria: (a) marginal discoloration, (b) secondary caries, (c) marginal integrity, (d) surface texture, (e) restoration fracture, and (f) occlusal wear, rating with Alpha, Bravo and Charlie over an observation period up to 11years (68-139 months; median: 94.9±26.1 months). Data was statistically analyzed using the Kaplan-Meier estimation.

RESULTS

Monolithic lithium disilicate occlusal onlays presented a 100% survival rate. Four restorations within one patient (3.9%) presented marginal discoloration, one after 60 and three after 108 months (all rated Bravo). One restoration (1%) showed a marginal crack formation (technical complication) after 120 months, rated Bravo. No biological complication, debonding or secondary caries could be found and tested periodontal parameters showed excellent results.

SIGNIFICANCE

Based on the analyzed data up to 11years, monolithic occlusal onlays made of lithium disilicate ceramic can be considered as a reliable treatment option for full-mouth rehabilitations in patients with severe tooth wear.

Oral health-related impact profile in full-mouth restored patients with two different tooth-colored restoration materials

OBJECTIVES

To analyze the change of oral health impact profile (OHIP) in patients with full-mouth rehabilitations due to moderate/severe tooth wear dependent on different restorative materials (ceramic/experimental CAD/CAM composite).

MATERIALS AND METHODS

Twenty-nine healthy patients (15 male/14 female, age 44.6 ± 28.4 years) requiring full-mouth rehabilitation due to different degrees of tooth wear were instructed to fill the German version OHIP-G49 questionnaire before (baseline) and 30 days after prosthetic treatment with ceramic (n = 17) or experimental CAD/CAM composite (n = 12) restorations. Questions were divided into five dimensions: appearance, oral functions, psychosocial impact, linguistic limitations, and orofacial pain; changes between both OHIP-questionnaires for each question and patient were dissected by difference values, separately. Data were analyzed with the Kolmogorov-Smirnov, Wilcoxon's signed-rank, Kruskal-Wallis, Mann-Whitney, and Cronbach's alpha tests (significance level p = 0.01).

RESULTS

The appearance dimension showed the highest results (p < 0.001, 100% improvement with all values > 0); the linguistic limitations dimension presented the lowest improvement (p < 0.001). The other three dimensions were not statistically different. No statistical differences between the two materials depending on OHIP questionnaire results occurred.

CONCLUSIONS

The esthetic appearance of the patients was influenced positively by full-mouth rehabilitation, irrespective of the material used. Improvements were also made in the parameters "toothache" and "problem of food intake." No statements could be made for the parameter "language."

CLINICAL RELEVANCE

With an increasing number of patients with moderate/severe tooth wear, thorough knowledge about the improvement of OHIP is important. This information is advantageous for the consultation and handling of patients when complex treatments are planned.

Minimally Invasive Treatment of an Adult with Severe Pseudo Class III Malocclusion

Pseudo class III malocclusion is reverse anterior occlusion or anterior cross-bite with first molars and canines in a class I relationship. It is very important to diagnose the pseudo class III from true skeletal class III. The combination of anterior displacement of the mandible, tooth wear, and loss of occlusal vertical dimension (OVD) in adults may result anterior cross-bite. The key factor in diagnosis of this malocclusion is an interdisciplinary approach with an orthodontist. Cephalometric images are essential for diagnosis of pseudo class III mal-occlusion. Most relevant publications on correcting this condition have recommended either full-coverage restorations or extraction and placement of implants to correct this malocclusion. Advances of material and technology may help dental practitioners to restore tooth wear and OVD with a conservative approach without removing more tooth structures. This clinical report shows the treatment of pseudo class III with minimally invasive treatment using partial coverage restorations fabricated with lithium disilicate.