Phenotypes of patients with extensive tooth wear—A novel approach using cluster analysis

Restorative options for moderate and severe tooth wear: A systematic review

OBJECTIVES

This systematic review aimed to evaluate the failure of different types of restorative treatments for tooth wear.

STUDY DESIGN

A search was conducted in Medline, Cochrane, Web of Science, SCOPUS, and Embase (October 2023) with no limits for publication year or language. Randomized and non-randomized studies comparing restorative options to treat moderate to severe tooth wear were included. Two reviewers independently selected studies, extracted data and assessed the risk of bias. Failure data was obtained from each study and organised into either 'major failure,' with the need to replace the restoration, or 'minor failure,' where the restoration was repaired or refurbished. Studies that did not bring comparisons or sufficient data to calculate failures were excluded.

RESULTS

3977 articles were found; 43 studies were eligible for analysis. For RCT studies (n = 6), direct composite showed a mean annual failure rate (AFR) of 10.54 % for minor failures and 8.38 % for major failures. For non-RCT studies (n = 37), these were 3.97 % and 0.4 % respectively. For RCT studies, indirect composite showed a mean AFR of 12.84 % for minor failures and 10.41 % for major failures. For non-RCT studies, these were 2.9 % and 0.15 % respectively. For RCT studies, indirect ceramic showed a mean AFR of 0.09 % for minor failures and 0.13 % for major failures. For non-RCT studies, these were 0.83 % and 0.33 % respectively.

CONCLUSION

Indirect restorations demonstrated lower failure rates; however, they can be more invasive and require more operator time than alternatives. Direct methods showed greater failures but offer a minimally invasive modality. (CRD42022358586) CLINICAL SIGNIFICANCE: This study will provide clinicians with a more informed view of the success, survival and failure rates of materials when deciding how to restore tooth wear.

Identifying clusters of raters with a common notion of diagnosing erosive tooth wear: a step towards improving the accuracy of diagnostic procedures

BACKGROUND

Heterogeneous results are to be expected when multiple raters diagnose whether the dentine of a tooth with erosive tooth wear (ETW) is exposed or not. Identification of notions (fundamental concepts and understanding) about the diagnostic problem shared by groups of raters can be helpful to develop guidelines and to optimize teaching and calibration procedures. We aim to illustrate how clusters of raters with a common notion can be identified and how first insights about the notions can be obtained.

METHODS

This investigation is based on a former study in which 49 tooth surfaces affected by ETW were rated visually by 61 raters (23 scientists, 18 university dentists, 20 dental students) in terms of dentine exposed or not. The true status was determined histologically. Gender, age, professional experience, and specialization of the raters were documented. An algorithm was used to search for clusters of raters with high agreement in their ratings suggesting a common notion. The clusters identified were examined with respect to various aspects.

RESULTS

Four clusters of raters with high agreement could be found. The ratings of the raters in the cluster with the lowest diagnostic accuracy showed the highest correlation with the degree of tissue loss and the background tooth color, whereas the correlation with tissue loss was least in the cluster with highest diagnostic accuracy. The 15 raters of the latter cluster covered both students and dentists with or without specialization in erosion/cariology and/or long experience. This suggests that similar conceptual understanding of ETW can exist independent of professional experience.

CONCLUSIONS

The described methodology is useful to identify clusters of raters with a common notion about a specific diagnostic problem. The cluster-specific notions can be further examined based on existing study data or by group-based interviews of the raters of a cluster. This methodology allows investigators to learn more about useful or useless cues in diagnostic decision-making. This information can facilitate development or enhancement of guidelines on diagnostic decision-making.

Diagnostic accuracy of clinical signs to detect erosive tooth wear in its early phase

BACKGROUND

Agreement exists about most of the clinical features of erosive tooth wear, though no evidence supports their validity in diagnosing the condition.

OBJECTIVE

This study aimed to determine the accuracy of clinical signs for diagnosing erosive tooth wear in a young adult general population.

METHODS

We conducted a cross-sectional study of dental students. In the first session, two examiners independently determined the presence of erosive tooth wear based on glazed enamel surfaces, morphological changes on non-occlusal surfaces, flattening of convex areas, or any type of concavity. In the second session, one examiner recorded the presence of clinical signs according to the Tooth Wear Evaluation System. The diagnostic accuracy of each clinical sign, both alone and combined, was assessed by calculating their sensitivity and specificity for detecting erosive tooth wear and performing multivariate logistic regression models.

RESULTS

Of the 147 participants (78 women and 69 men; median age, 22 years) we included, 76.2% had erosive tooth wear. The single clinical signs with greatest balance between the sensitivity and specificity were 'convex areas flatten' (63% and 71%, respectively) and 'dull surface' (47% and 89%, respectively). Multivariate logistic regression revealed that 'preservation of the enamel cuff' (odds ratio, 22) and the combination of 'smooth silky shining, silky glazed appearance, and dull surface' (odds ratio, 68) had the best predictive values.

CONCLUSIONS

The most accurate clinical signs for detecting early erosive tooth wear were dull surface, flattened convex areas and preservation of the enamel cuff.

Tooth Wear Evaluation System 2.0-Evaluation of diagnostic reliability in the assessment of signs and symptoms for tooth wear by non-experts

BACKGROUND

Tooth wear is a multifactorial condition that manifests through various signs and symptoms. These individual signs and symptoms were described in multiple studies, leading to the inclusion in TWES 2.0 (Tooth Wear Evaluation System 2.0) and the forthcoming DC-TW (Diagnostic Criteria for Tooth Wear). However, a study evaluating their reliability has yet to be conducted.

OBJECTIVE

The aim of the study was to examine the reliability in the assessment of 6 signs of pathological tooth wear and 18 clinical signs and symptoms determining aetiology, all of which are included in the TWES 2.0/DC-TW.

METHODS

48 dental students (operators) evaluated patient cases from a patient pool of 14 patients on dental casts and high-resolution intraoral photographs. The agreement between all operators for each sign and symptom was calculated based on ICC (Intraclass Correlation Coefficients). Additionally, the agreement of each operator's evaluation with a predefined sample solution was calculated based on Cohen's kappa.

RESULTS

Inter-user agreement ranged from near perfect (0.91) to poor (0.02) for the various pathology signs or aetiology symptoms of tooth wear (mean 0.32). The agreements of the operator's ratings compared to the sample solution resulted in Cohen's kappa from 0.18 to 1 (mean 0.59) for the pathology signs and ranged from 0.02 to 0.51 for the aetiology signs (mean 0.38).

CONCLUSIONS

The reliability of the signs and symptoms examined and the ability of individual investigators to correctly identify and assign signs and symptoms varied widely. The current assessment tools for the qualification of tooth wear need further refinement, and examiners need intensive training in tooth wear assessment.

Signal acquisition and analysis of ambulatory electromyographic recordings for the assessment of sleep bruxism: A scoping review

BACKGROUND

Ambulatory electromyographic (EMG) devices are increasingly being used in sleep bruxism studies. EMG signal acquisition, analysis and scoring methods vary between studies. This may impact comparability of studies and the assessment of sleep bruxism in patients.

OBJECTIVES

(a) To provide an overview of EMG signal acquisition and analysis methods of recordings from limited-channel ambulatory EMG devices for the assessment of sleep bruxism; and (b) to provide an overview of outcome measures used in sleep bruxism literature utilising such devices.

METHOD

A scoping review of the literature was performed. Online databases PubMed and Semantics Scholar were searched for studies published in English until 7 October 2020. Data on five categories were extracted: recording hardware, recording logistics, signal acquisition, signal analysis and sleep bruxism outcomes.

RESULTS

Seventy-eight studies were included, published between 1977 and 2020. Recording hardware was generally well described. Reports of participant instructions in device handling and of dealing with failed recordings were often lacking. Basic elements of signal acquisition, for example amplifications factors, impedance and bandpass settings, and signal analysis, for example rectification, signal processing and additional filtering, were underreported. Extensive variability was found for thresholds used to characterise sleep bruxism events. Sleep bruxism outcomes varied, but typically represented frequency, duration and/or intensity of masticatory muscle activity (MMA).

CONCLUSION

Adequate and standardised reporting of recording procedures is highly recommended. In future studies utilising ambulatory EMG devices, the focus may need to shift from the concept of scoring sleep bruxism events to that of scoring the whole spectrum of MMA.

Influence of the practice of sports, sleep disorders, and habits on probable sleep bruxism in children with mixed dentition

OBJECTIVE

Investigate the association between sleep disorders and probable sleep bruxism (SB) in children eight to ten years of age.

METHODS

A cross-sectional study was conducted with 739 schoolchildren in Brazil. Parents/guardians answered a sociodemographic questionnaire, the sleep disturbance scale for children, and the Circadian Energy Scale. Parafunctional habits were evaluated using the Nordic Orofacial Test-Screening. Multivariate logistic regression was performed (α = 5%), and a directed acyclic graph was used in the statistical model.

RESULTS

The prevalence of probable SB was 9.1% and 58.6% of the children had sleep disorders. In the final model, having unmarried parents/guardians (OR = 1.98; 95% CI: 1.07-3.65), exhibiting parafunctional habits (OR = 2.02; CI: 1.01-4.06), not practicing sports (OR = 1.92; CI: 1.04-3.54), sleep-wake transition disorders (SWTD) (OR = 2.01; 95%CI: 1.12-3.62), and excessive daytime sleepiness (EDS) (OR = 2.17; 95%CI: 1.11-4.29) were significant associated with probable SB.

CONCLUSION

The occurrence of probable sleep bruxism was influenced by the marital status of the parents/guardians, parafunctional habits, the non-practice of sports, and sleep disturbance (SWTD and EDS). This research contributes to the planning of public policies that include educational regimens at school to prevent sleep disorders and favor the reduction in sleep bruxism prevalence.

Influence of nanoparticulated chitosan on the biomodification of eroded dentin: clinical and photographic longitudinal analysis of restorations

To evaluate the influence of the pre-treatment with 2.5% nanoparticulate chitosan (2.5% NanoChi) solution on eroded dentin before the restorative dental treatment. The sample consisted of 22 patients (age between 33 and 52 years) with shallow or medium erosion lesions located in two homologous teeth. The teeth were randomly assigned according to dentin treatment: with 2.5% NanoChi and without with chitosan (control). The NanoChi were applied immediately after acid etching. The teeth were restored with Single Bond Universal (3 M) and Charisma resin (Kulzer). Analyzes were done using modified USPHS (retention, secondary caries, marginal adaptation, and sensitivity) and photographic (color, marginal pigmentation, and anatomical form) criteria at 7 days (baseline) and 1 year. Population demographics, Kaplan-Meier estimates and log-rank test (Mantel-Cox) were calculated for 1 year (α = 0.05). No significant difference was found in the survival rates between groups (p > 0.05) at 7 days and 1 year after treatment. After 7 days, 100% of the restorations were scored as Alpha on all criteria. After 1 year, 91% of the NanoChi restorations were scored as Alpha and 9% as Charlie for the retention, marginal adaptation, and anatomical form criteria, while 86% of the control restorations (without NanoChi) received the Alpha score and 14% received the Charlie. Secondary caries, sensitivity, color, and marginal pigmentation criteria were scored as Alpha in 100% of the restorations. The biomodification of eroded dentin with 2.5% NanoChi did not influence the survival of the restorations after 1 year. The application of 2.5% NanoChi on eroded dentin did not increase failures of resin restorations after 1 year and it can be used as a pre-treatment solution.

Long-term results of a randomized clinical trial of 2 types of ceramic crowns in participants with extensive tooth wear

STATEMENT OF PROBLEM

Evidence is sparse regarding the long-term outcomes of restorative treatment of patients with extensive tooth wear.

PURPOSE

The purpose of this long-term prospective randomized clinical trial was to evaluate the performance and success rate of pressed lithium disilicate (LD) and translucent zirconia (TZ) crowns in participants with extensive tooth wear.

MATERIAL AND METHODS

A total of 62 participants with extensive tooth wear (17 women, 45 men; mean age 44.8 years; range 25-63 years) received a total of 713 crowns, LD=362 and TZ=351. Both types of crowns had chamfer preparations and were adhesively luted with dual-polymerizing composite resin cement (PANAVIA F 2.0; Kuraray Noritake Dental Inc). The restorations were clinically reevaluated on average 14, 31, 39, 54, and 65 months after insertion of the crowns according to the modified United States Public Health Service (USPHS) criteria.

RESULTS

After an observation period of up to 6 years, the survival rate for both types of crowns was 99.7%, with 1 lost LD crown after 1 year as a result of loss of retention and 1 lost TZ crown after 3 years because of tooth fracture at the cemento-enamel junction. The success rates were similar for both types of crowns: 98.6% for LD and 99.1% for TZ. Reasons for failures were that 3 participants in each group developed apical lesions, minimal ceramic fractures, or their crowns were rebonded after loss of adhesion. Assessment of color at baseline was significantly different with a better match for LD (84.8% Alfa, 15.2% Bravo) than for TZ crowns (36.5% Alfa, 63.5% Bravo), including TZ crowns with veneered porcelain (P<.001). Secondary caries and cracks did not occur. A post hoc analysis of clinical performance did not indicate any significant differences between extensive tooth wear with primarily mechanical or chemical factors.

CONCLUSIONS

No differences were found between the 2 types of ceramic materials concerning the long-term success and clinical performance, except that TZ crowns were rated by a blinded clinician as less esthetic than LD crowns. The use of high-strength ceramic materials, as well as reliable adhesive bonding, are probably the key factors in the long-term success of ceramic crowns in participants with extensive tooth wear independent of the specific etiology.

Correlations between dental wear and oral cavity characteristics: Mandibular torus, palatine torus, and oral exostoses

OBJECTIVE

This study evaluates the correlations amongst mandibular torus, palatine torus, oral exostoses to dental wear/loss and temporomandibular damage.

METHODS

The sample consists of 504 skulls from the Hamann-Todd Osteological Collection; 223 African American and 281 European Americans aged between 30 and 80 years. The sample was analyzed using Pearson's Chi-square for significance of sex, age, ancestry, and wear as well as the interactions between the demographic variables and the presence of mandibular torus, palatine torus and oral exostoses.

RESULTS

Wear was statistically significant by age and sex but not ancestry. The maxillary exostoses varied significantly by age, ancestry and wear but not sex. Mandibular torus frequencies varied significantly by wear, sex and ancestry. The palatine torus varied significantly across wear groups, sex and ancestry.

DISCUSSION

The etiology of nonmetric oral cavity characteristics, mandibular torus, palatine torus and oral exostosis, is complex. The degree to which traits' presence and expression is the result of genetic and environmental interactions is not fully understood. More than age, sex or ancestry, the degree of dental wear and tooth loss influences the presence and expression of the oral cavity traits. The sample can be characterized as the presence of exostoses in higher frequencies in young African American males with little tooth loss. Males of both ancestral groups with heavy wear have higher frequencies of mandibular tori than females. The palatine torus is more common in edentulous European American females.

Diagnosing tooth wear, a new taxonomy based on the revised version of the Tooth Wear Evaluation System (TWES 2.0)

Background

Tooth wear is a multifactorial condition, leading to the loss of dental hard tissues. Physiological tooth wear is a slow process that normally does not lead to any subjective symptoms. When the condition progresses, it can become pathological, and several signs and symptoms may occur. The Tooth Wear Evaluation System (TWES) was described to implement a systematic diagnostic and management approach. Recently, management guidelines were presented in a European Consensus Statement (ECS) as well.

Objectives

To evaluate the TWES in practice and to integrate the principles described in the ECS in order to compose a renewed TWES 2.0 and a new taxonomy.

Methods

The TWES and the recommendations of the ECS were used by dental clinicians, in order to test its applicability in practice.

Results

Agreement was reached that the TWES 2.0 will use a stepwise approach, with a straightforward Tooth Wear Screening part and a more detailed Tooth Wear Status part. Also, the assessment of pathology from the ECS is incorporated in the TWES 2.0 (both classification and taxonomy).

Conclusions

In the TWES 2.0 is described that tooth wear is pathological if moderate/severe/extreme tooth wear is present, in combination with one or several described signs and symptoms. Aetiology can be assessed by findings that indicate a chemical and/or a mechanical cause. The taxonomy may help to identify situations in which preventive (restorative) interventions in early stages of tooth wear can be indicated. The reliability and validity of the adapted parts must be proven.

Clinical presentation of two phenotypes of tooth wear patients

OBJECTIVE

To assess the clinical presentation of wear lesions in two phenotypes of tooth wear (TW) patients based on distribution and morphological features of wear.

MATERIALS AND METHODS

103 patients (mean age = 43.1 years) were divided into two groups based on cluster analysis; cluster A (61 patients) and cluster B (42 patients). The distribution of wear lesions, scores of presence or absence of 10 defined morphological TW criteria and number of teeth fulfilling each criteria were compared between groups. Intra- and inter-examiner reliability of the 10 TW criteria was determined by Cohen's kappa and intraclass correlation coefficient.

RESULTS

While cluster A had more wear in maxillary anterior teeth and mandibular molars compared with the same opposing tooth groups (p < 0.001, p < 0.007 respectively), there were no differences for cluster B. Cluster A was characterized by higher prevalence of 4 chemical morphological criteria and the highest number of teeth affected by one chemical criteria, whereas cluster B had a higher prevalence of one mechanical criteria and higher number of teeth affected by an additional mechanical criteria. Both intra- and inter-examiner values for the defined TW criteria were fair to excellent.

CONCLUSION

The results may indicate a more chemical background for TW in cluster A and mechanical background in cluster B. Furthermore, clinicians may use certain clinical features of TW to distinguish between individuals who belong to a specific TW cluster with a presumed chemical or mechanical etiology. These preliminary findings need to be confirmed in future studies.