Impact of restorative treatment of tooth wear upon masticatory performance

Challenges in conducting clinical research in primary care dentistry

The integration of dentistry into primary health care is crucial for promoting patient well-being. However, clinical studies in dentistry face challenges, including issues with study design, transparency, and relevance to primary care. Clinical trials in dentistry often focus on specific issues with strict eligibility criteria, limiting the generalizability of findings. Randomized clinical trials (RCTs) face challenges in reflecting real-world conditions and using clinically relevant outcomes. The need for more pragmatic approaches and the inclusion of clinically relevant outcomes (CROs) is discussed, such as tooth loss or implant success. Solutions proposed include well-controlled observational studies, optimized data collection tools, and the integration of artificial intelligence (AI) for predictive modelling, computer-aided diagnostics and automated diagnosis. In this position paper advocates for more efficient trials with a focus on patient-centred outcomes, as well as the adoption of pragmatic study designs reflecting real-world conditions. Collaborative research networks, increased funding, enhanced data retrieval, and open science practices are also recommended. Technology, including intraoral scanners and AI, is highlighted for improving efficiency in dental research. AI is seen as a key tool for participant recruitment, predictive modelling, and outcome evaluation. However, ethical considerations and ongoing validation are emphasized to ensure the reliability and trustworthiness of AI-driven solutions in dental research. In conclusion, the efficient conduct of clinical research in primary care dentistry requires a comprehensive approach, including changes in study design, data collection, and analytical methods. The integration of AI is seen as pivotal in achieving these objectives in a meaningful and efficient way.

Chewing performance of patients with worn dentition before and after restorations: A scoping review

BACKGROUND

Tooth wear is a multifactorial complex process related to the loss of dental tissue, due to chemical or mechanical processes, by abrasion, attrition, erosion. Restorative treatment represents an attempt to rebuild and recreate the lost structure.

OBJECTIVE

This scoping review aims to investigate whether restorative treatment of worn dentition (either with direct or indirect adhesive composite adhesive procedures or with prosthetic techniques) can have an impact on the masticatory performance parameters.

METHODS

A scoping review was conducted on multiple databases (Pubmed, Medline CENTRAL, ICTRP), following the PRISMA guidelines. Abstracts of research papers were screened for suitability, and full-text articles were obtained for those who satisfied the inclusion and exclusion criteria.

RESULTS

Only one article meet the inclusion criteria of the review. Restorative treatment of worn dentition although have a positive impact on the self-report ability to chew, has no effect on the masticatory performance test.

CONCLUSION

At the moment, not enough evidence to comment on the actual therapeutic role of restorative treatment on tooth wear is available. Clinicians, before taking any clinical decision, should carefully discuss with patients the needs and expectations of the treatment plan.

Prevalence of tooth wear diseases in patients with diabetes and its impact on the quality of life in Dakshina Kannada population: a cross sectional study

Background

Early detection and management of tooth wear (TW) has not been given due consideration in the dental profession. Thus, this study aimed to explore the prevalence of TW in adults with diabetes in Dakshina Kannada population using the Basic Erosive Wear Examination (BEWE) and recording its impact on quality of life using the Oral Health Impact Profile (OHIP-14).

Methods

In total, 236 dentate adults with diabetes and TW, who visited the Manipal College of Dental Sciences, Mangalore were recruited to the study. Assessment of TW was done using BEWE during examination of each participant and was categorized as none, mild, moderate, and severe. Impact of TW on quality of life was assessed using the OHIP-14.

Results

Overall, 81 (34.30%) individuals had a poor score on the basic erosive tooth index, 82 (34.70%) had a medium score, . The level of TW, both moderate and severe (high), affected quality of life. Erosion, abrasion and attrition were seen in a large proportion of the study population. The diabetic status of the individual was collected from their medical file. The HbA1C level was found to range from good, fair and poor control. The quality of life among the study population was affected because of TW and diabetes. Few participants had hypertension along with diabetes. The majority of study participants were on oral hypoglycaemic agents. Participants used tooth brushes and tooth paste and brushing frequency varied between once or twice daily.

Conclusions

In the study population, there were moderate and severe TW patterns. Quality of life was found to be impacted by TW. Dental professionals must give proper consideration to the influence of TW on quality of life in addition to clinical findings. This will make it easier to offer preventive or restorative management depending on the situation.

The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

Managing tooth wear with respect to quality of life: an evidence-based decision on when to intervene

Patients with more severe forms of tooth wear may require restorative rehabilitation. The decision to commence treatment must be taken carefully and there are a multitude of factors to consider. Alongside the clinical signs and symptoms typically associated with tooth wear, there is also the need to assess the impact of the condition on the patient's oral health-related quality of life. As part of the discussions relating to the attainment of informed consent for the restoration of the worn dentition, not only is it relevant to appropriately appraise the risks, benefits, costs, reasonable alternatives and likely prognosis of the proposed treatments, but to also elaborate on the expected impact of the intervention on the patient's oral health-related quality of life. The aim of this article is to review the evidence relating to the impact of the quality of life with the management of tooth wear, with the introduction of the concept of an evidence-based approach to decision-making when planning care.

Wear behaviour of direct composite restorations in tooth wear patients: a 5-year clinical study

OBJECTIVE

This study aimed to investigate the wear behaviour of direct composite restorations after 5 years and associated patient factors.

METHODS

38 patients (6 females, 32 males; 35.2 ± 7.6y) from the Radboud Tooth Wear Project with generalized moderate to severe tooth wear were treated with direct composite restorations on all teeth. Ethical approval was sought and granted before the study was undertaken. Intraoral 3D scans were recorded at 1 month (baseline) and 5 years (recall) after treatment. The amount of height loss was measured at six index teeth (first molars and upper central incisors). Patient factors (age, vertical dimension of occlusion increase, bite force, aetiology score, jaw position and bearing/ non-bearing cusps) were included in the analysis. Multilevel multiple regression with bootstrapping was used to analyse the influence of these factors on wear behaviour of restorations. Observer reliability was tested by paired t-tests and Band-Altman plots (p<0.05) RESULTS: After 5 years, the mean height loss was 0.23± 0.19 mm for incisors and 0.43± 0.24 mm for molars (p≤0.001). Patient factors did not show any significant influence on height loss of the composite restorations, while bearing cusps showed significant more wear compared to non-bearing cusps (p≤0.001). The observer reliability tests confirmed the repeatability (correlation of 0.809, DME 0.103).

CONCLUSIONS

Wear of composite restorations is a significant and relevant factor over time in patients treated with severe tooth wear. Within the limitations of this clinical study, patient factors were found not to have a significant effect on wear behaviour of direct composite restorations.

The effect of pre-treatment levels of tooth wear and the applied increase in the vertical dimension of occlusion (VDO) on the survival of direct resin composite restorations

OBJECTIVES

To investigate the effects of the level of pre-treatment tooth wear and increasing the VDO on the performance of direct resin composite restorations for the rehabilitation of pathological tooth wear.

METHODS

Full-mouth (pre-treatment) grading was performed on digital greyscale scan records for 34 participants (35.3 ± 8.4 years) with signs of moderate-to-severe generalised tooth wear, using the Tooth Wear Evaluation System and the Basic Erosive Wear Examination. Each participant received full-mouth direct resin composite restorations, with increased VDO. The post-treatment increase in the VDO was determined. Recalls were planned after 1 month, and after 1, 3, and 5 years. Three 'levels' of restoration failure were described. The effects of the variables on the frequencies of restoration failure were calculated with a multivariable Cox regression, (p < 0.05).

RESULTS

1269 restorations were placed with a mean observation period of 62.4 months. Increasing the VDO by 1 mm significantly reduced the risks of all levels of anterior restoration failure (HR ≤ 0.62, p ≤ 0.025). A higher anterior BEWE surface score was associated with increased risks of Level 2- & 3- failures, (HR ≥ 1.29, p ≤ 0.019). Premolar restorations showed lower risks of Level 2- & 3- failure, compared to the molar restorations, (HR ≤ 0.5, p ≤ 0.005).

CONCLUSION

Levels of pre-treatment wear and the applied change in the VDO significantly affected failure risk.

CLINICAL RELEVANCE

Direct resin composite restorations for the rehabilitation of wear should be made as voluminous as possible, respecting the presenting biological, functional, and esthetic constraints.

Effect of neutralization and hydrofluoric acid precipitate remotion on the compressive strength of monolithic lithium disilicate crowns

BACKGROUND

The cleaning protocol for the ceramic surface after acid etching resulted in a decrease in bond strength and flexural strength of a glass ceramic. This study aims to evaluate the effect of different ceramic surface treatments after hydrofluoric acid etching (HF) on the compressive strength of monolithic lithium disilicate crowns.

METHODS

Forty (40) human third molars received conventional full coverage preparation. After performing digital impressions of teeth preparations, ceramic blocks were machined using a CAD/CAM system in order to obtain the crowns. The crowns were distributed in 4 groups as ceramic surface treatment (N.=10): (HF) - 4.9% HF for 20s + air-water spray for 30s; (HFN) - HF + neutralizing agent for 5 min (N); (HFU) - HF + ultrasonic bath for 5 min (U); e (HFNU) - HF + N + U. SEM and EDS analysis was performed in each group in order to characterize the ceramic surface and to verify the chemical element distribution after HF cleaning protocols. A silane layer was applied (for 60s), and crowns were then cemented with dual resin cement. A compressive load was applied on the middle of the occlusal crown surface with a crosshead speed of 1 mm/min until fracture. Data were analyzed using ANOVA and Tukey test (α=0.05).

RESULTS

Fluoride ions were found in samples of all postetching cleaning protocols. The mean value (Kgf) was: HF =169.92±21.37; HFN =187.34±34.79; HFU =166.63±40.22 and HFNU=175.26±40.22. The ceramic surface treatment after HF etching did not significantly influence (P>0.05) the compressive strength of the tested ceramic crowns.

CONCLUSIONS

Surface treatments with neutralizing agent associated with the ultrasonic bath as the pre-cementation protocol was the most efficient protocol in eliminating the precipitate deposited on the porosities created by acid etching.