Comprehensive solution for acetamiprid degradation: Combined electro-Fenton and adsorption process

Study on the mechanism of rapid degradation of Rhodamine B with Fe/Cu@antimony tailing nano catalytic particle electrode in a three dimensional electrochemical reactor

A novel particle electrode based on antimony tailings microspheres was successfully constructed by ultrasonic immersion calcination method, and the degradation of RhB was studied in a three-dimensional electrochemical reactor (3DER). It was characterized by XRD, SEM, EDS, XPS, cyclic voltammetry and linear sweep voltammetry. When the pH value is 5.00, the dosage of Fe/Cu@antimony tailing is 1.50 g/L, the initial concentration is 100 mg/L, and the current density is 20 mA/cm2, the degradation efficiency is the best (99.40% for RhB and 98.81% for TOC) within 15 min. The results show that in the three-dimensional electrochemical oxidation system, electrochemical oxidation and electro Fenton oxidation occur at the same time to cause the increase of hydroxyl radicals. According to LC-MS analysis and EPR characterization, it can be found that the main degradation mechanism of RhB is that hydroxyl radicals continuously attack RhB, and realize rapid degradation of RhB through deethylation, deamination, dealkylation, decarboxylation, chromophore splitting, ring opening and mineralization. Fe/Cu@antimony tailing particles are both electrodes for electrochemical oxidation and catalysts for Fenton oxidation. The degradation effect of RhB remained at 94% after 6 cycles, and the leaching rates of Fe and Cu are only 1.20% and 0.79%, indicating that Fe/Cu@AT had significant stability. This work provides a new insight into the establishment of an efficient and stable three-dimensional electrocatalytic particle electrode.

Remediation technologies for neonicotinoids in contaminated environments: Current state and future prospects

Neonicotinoids (NEOs) are synthetic insecticides with broad-spectrum insecticidal activity and outstanding efficacy. However, their extensive use and persistence in the environment have resulted in the accumulation and biomagnification of NEOs, posing significant risks to non-target organisms and humans. This review provides a summary of research history, advancements, and highlighted topics in NEOs remediation technologies and mechanisms. Various remediation approaches have been developed, including physiochemical, microbial, and phytoremediation, with microbial and physicochemical remediation being the most extensively studied. Recent advances in physiochemical remediation have led to the development of innovative adsorbents, photocatalysts, and optimized treatment processes. High-efficiency degrading strains with well-characterized metabolic pathways have been successfully isolated and cultured for microbial remediation, while many plant species have shown great potential for phytoremediation. However, significant challenges and gaps remain in this field. Future research should prioritize isolating, domesticating or engineering high efficiency, broad-spectrum microbial strains for NEO degradation, as well as developing synergistic remediation techniques to enhance removal efficiency on multiple NEOs with varying concentrations in different environmental media. Furthermore, a shift from pipe-end treatment to pollution prevention strategies is needed, including the development of green and economically efficient alternatives such as biological insecticides. Integrated remediation technologies and case-specific strategies that can be applied to practical remediation projects need to be developed, along with clarifying NEO degradation mechanisms to improve remediation efficiency. The successful implementation of these strategies will help reduce the negative impact of NEOs on the environment and human health.

Minerals as catalysts of heterogeneous Electro-Fenton and derived processes for wastewater treatment: a review

Advanced oxidation processes (AOPs) such as Fenton's reagent, which generates highly reactive oxygen species, are efficient in removing biorefractory organic pollutants from wastewater. However, Fenton's reagent has drawbacks such as the generation of iron sludge, high consumption of H₂O₂, and the need for pH control. To address these issues, Electro-Fenton (EF) and heterogeneous Electro-Fenton (HEF) have been developed. HEF, which uses solid catalysts, has gained increasing attention, and this review focuses on the use of mineral catalysts in HEF and derived processes. The reviewed studies highlight the advantages of using mineral catalysts, such as efficiency, stability, affordability, and environmental friendliness. However, obstacles to overcome include the agglomeration of unsupported nanoparticles and the complex preparation techniques and poor stability of some catalyst-containing cathodes. The review also discusses the optimal pH range and dosage of the heterogeneous catalysts and compares the performance of iron sulfides versus iron oxides. Although natural minerals appear to be the best choice for effluents at pH>4, no scale-up reports have been found. The need for further development in this field and the importance of considering the environmental impact of trace toxic metals or catalytic nanoparticles in the treated water on the receiving ecosystem is emphasized. Finally, the article acknowledges the high energy consumption of HEF processes at the lab scale and calls for their performance development to achieve environmentally friendly and cost-effective results using real wastewaters on a pilot scale.

Synthesis of the MnO2-Fe3O4 catalyst support on amorphous silica: a new Fenton's reagent in the degradation of the reactive blue-19 in aqueous solution

In this study, a new Fenton's reagent was synthesized via two steps: (1) the dispersed Fe₃O₄ nanoparticles were immobilized on the surface of the SiO₂ carrier via the precipitation process, and (2) the MnO₂ nano-sheets were coated on the surface of Fe₃O₄/SiO₂ via hydrothermal method. The SiO₂ carrier has been synthetically utilized from Vietnamese rice husk. The successful formation of the MnO₂-Fe₃O₄/SiO₂ composite has been analytically characterized by the XRD (X-ray diffraction), SEM (scanning electron microscope), EDS (energy dispersive spectrometry)-mapping, FTIR (Fourier transform infrared), S_BET (Brunauer-Emmett-Teller specific surface area), and adsorption/desorption isotherms. This Fenton system was employed to catalyze degradation process of the reactive-blue 19 (RB19) with approximately 100% of removal efficiency after 25 min at the optimal condition of 0.15 g/100 mL of catalyst dosage, pH = 3, and the H₂O₂ concentration of 3 mL/100 mL. Moreover, the catalyst could be reused at least six times with high catalytic activity that was more than 90%. In conclusion, this study showed that the mesoporous MnO₂-Fe₃O₄/SiO₂ composite has a great potential for the removal application of dyes from wastewater, and the application of Vietnam rice husk in environmental treatment was developed.

Removing emerging e-waste pollutant DTFPB by synchronized oxidation-adsorption Fenton technology

Liquid crystal monomers (LCMs), an emerging group of organic pollutants related to electronic waste, have been frequently detected from various environmental matrices, including landfill leachate. The persistence of LCMs requires robust technology for remediation. The objectives of this study were to evaluate the feasibility, performance and mechanism of the remediation of a typical LCM 4-[difluoro(3,4,5-trifluorophenoxy)methyl]- 3,5-difluoro-4'-propylbiphenyl (DTFPB) via synchronized oxidation-adsorption (SOA) Fenton technology and verify its application in DTFPB-contaminated leachate. The SOA Fenton system could effectively degrade 93.5% of DTFPB and 5.6% of its total organic carbon (TOC_DTFPB) by hydroxyl radical oxidation (molar ratio of Fe²⁺ to H₂O₂ of 1/4 and pH 2.5-3.0) following a pseudo-first-order model under 0.378 h^-1. Additionally, synchronized adsorption of DTFPB and its degradation intermediates by in situ resultant ferric particles via hydrophobic interaction, complexation, and coprecipitation contributed to almost 100% of DTFPB and 33.4% of TOC_DTFPB removal. Three possible degradation pathways involving eight products were proposed, and hydrophobic interactions might drive the adsorption process. It was first confirmed that the SOA Fenton system exhibited good performance in eliminating DTFPB and byproducts from landfill leachate. This study provides new insights into the potential of the Fenton process for the treatment of emerging LCMs contamination in wastewater.

Challenges and Future Roadmaps in Heterogeneous Electro-Fenton Process for Wastewater Treatment

The efficiency of heterogeneous electro-Fenton technology on the degradation of recalcitrant organic pollutants in wastewater is glaringly obvious. This green technology can be effectively harnessed for addressing ever-increasing water-related challenges. Due to its outstanding performance, eco-friendliness, easy automation, and operability over a wide range of pH, it has garnered significant attention from different wastewater treatment research communities. This review paper briefly discusses the principal mechanism of the electro-Fenton process, the crucial properties of a highly efficient heterogeneous catalyst, the heterogeneous electro-Fenton system enabled with Fe-functionalized cathodic materials, and its essential operating parameters. Moreover, the authors comprehensively explored the major challenges that prevent the commercialization of the electro-Fenton process and propose future research pathways to countervail those disconcerting challenges. Synthesizing heterogeneous catalysts by application of advanced materials for maximizing their reusability and stability, the full realization of H₂O₂ activation mechanism, conduction of life-cycle assessment to explore environmental footprints and potential adverse effects of side-products, scale-up from lab-scale to industrial scale, and better reactor design, fabrication of electrodes with state-of-the-art technologies, using the electro-Fenton process for treatment of biological contaminants, application of different effective cells in the electro-Fenton process, hybridization of the electro-Fenton with other wastewater treatments technologies and full-scale analysis of economic costs are key recommendations which deserve considerable scholarly attention. Finally, it concludes that by implementing all the abovementioned gaps, the commercialization of electro-Fenton technology would be a realistic goal.

Mitigating toxicity of acetamiprid removal techniques - Fe modified zeolites in focus

All remediation pathways in aqueous solutions come down to three dominant ones - physical, chemical, and combinations thereof. Materials proposed for adsorption and oxidative degradation can induce positive or negative effects on cells compared to the pollutants themselves. Present research deals with the effects different methods for pesticide remediation have and how they impact cytotoxicity. With this particular intention, Fe-modified zeolites (obtained via citrate/oxalate complexes) of three zeotypes (MFI, BEA and FAU) were prepared and tested as adsorbents and Fenton catalysts for the removal of the acetamiprid pesticide. The materials are characterized by AFM, FTIR spectroscopy and ICP-OES. A different effect of the zeolite framework and modification route was found among the samples, which leads to pronounced adsorption (FAU), efficient Fenton degradation (MFI) or synergistic effect of both mechanisms (BEA). The cytotoxic effects of acetamiprid in the presence of zeolites, in pristine and modified forms, were tested on the MRC-5 human fibroblast cell line. A complete survey of the toxicity effect behind different pesticide removal methods is presented. Since neither adsorption nor catalytic degradation is the best option for pesticide removal, the focus is shifted to a combination of these methods, which proved to be optimal for pesticide toxicity reduction.

Adsorption Kinetics of Imidacloprid, Acetamiprid and Methomyl Pesticides in Aqueous Solution onto Eucalyptus Woodchip Derived Biochar

This work reports the application of a biochar (BC) derived from eucalyptus wood chips to remove pesticides (imidacloprid, acetamiprid and methomyl) from water. The pseudo-second order kinetic adsorption model is the best fit describing the adsorption of pesticides on BC. Furthermore, the Langmuir model correlated well with the adsorption isotherm data for acetamiprid and methomyl, while the Freundlich model was selected to explain the adsorption of imidacloprid on BC. The maximum adsorption capacities for methomyl, imidacloprid and acetamiprid on the BC material are 32.42, 14.75 and 4.87 mg g−1, respectively. The highest adsorption capacity of methomyl on the BC surface could be the result of multilayer adsorption suggested by the adsorption isotherm studies, with imidacloprid (or acetamiprid) monolayer being adsorbed on the BC surface. The structure, functional groups of pesticides, including their polarity, all played an important role contributing to the performance of biochar sorbent. Preferable interactions between the studied pesticides and the BC surface may include π-π interactions and hydrogen bonding. The steric aromatic entity in adsorbed imidacloprid and acetamiprid on the BC surface may hinder the possibility of other pesticide molecules approaching the available sorption sites on the surface.

Ingeniously designed Silica nanostructures as an exceptional support: Opportunities, potential challenges and future prospects for viable degradation of pesticides

Despite significant advancements in modern agricultural practices, efficient handling of pesticides is a must as they are continuously defiling our terrestrial as well as aquatic life. During the last couple of decades, substantial efforts by various research groups have been devoted to find innovative solutions to remove pesticides from our environment in a greener way. In this regard, functionalized silica nanoparticles (NPs) have gained considerable attention of scientific community due to their notable properties such as amenable design, large surface area as well as fine-tunable and uniform pore structures which make them an ideal material for pesticides removal. The present review aims to proffer current scientific progress attained by silica-based nanostructures as an excellent material for effective removal of noxious agrochemicals. Further, a brief discussion on the synthetic strategies as well as intrinsic benefits associated with different morphologies of silica have also been highlighted in this article. It also summarizes the recent reports on silica assisted degradation of pesticides via enzymatic, chemical as well as advanced oxidation protocols. Additionally, it presents a critical analysis of different support materials for decontamination of our ecosystem. The review concludes with potential challenges, their possible solutions along with key knowledge gaps and future research directions for successful deployment of silica supported materials in degradation of pesticides at commercial scale.

Bioaugmentation of acetamiprid-contaminated soil with Pigmentiphaga sp. strain D-2 and its effect on the soil microbial community

Bioaugmentation, a strategy based on microbiome engineering, has been proposed for bioremediation of pollutant-contaminated environments. However, the complex microbiome engineering processes for soil bioaugmentation, involving interactions among the exogenous inoculum, soil environment, and indigenous microbial microbiome, remain largely unknown. Acetamiprid is a widely used neonicotinoid insecticide which has caused environmental contaminations. Here, we used an acetamiprid-degrading strain, Pigmentiphaga sp. D-2, as inoculum to investigate the effects of bioaugmentation on the soil microbial community and the process of microbiome reassembly. The bioaugmentation treatment removed 94.8 and 92.5% of acetamiprid within 40 days from soils contaminated with 50 and 200 mg/kg acetamiprid, respectively. A decrease in bacterial richness and diversity was detected in bioaugmentation treatments, which later recovered with the removal of acetamiprid from soil. Moreover, the bioaugmentation treatment significantly influenced the bacterial community structure, whereas application of acetamiprid alone had little influence on the soil microbial community. Furthermore, the bioaugmentation treatment improved the growth of bacteria associated with acetamiprid degradation, and the inoculated and recruited taxa significantly influenced the keystone taxa of the indigenous microbiome, resulting in reassembly of the bacterial community yielding higher acetamiprid-degrading efficiency than that of the indigenous and acetamiprid-treated communities. Our results provide valuable insights into the mechanisms of microbiome engineering for bioaugmentation of acetamiprid-contaminated soils.

Heterogeneous Electro-Fenton as “Green” Technology for Pharmaceutical Removal: A Review

The presence of pharmaceutical products in the water cycle may cause harmful effects such as morphological, metabolic and sex alterations in aquatic organisms and the selection/development of organisms resistant to antimicrobial agents. The compounds’ stability and persistent character hinder their elimination by conventional physico-chemical and biological treatments and thus, the development of new water purification technologies has drawn great attention from academic and industrial researchers. Recently, the electro-Fenton process has been demonstrated to be a viable alternative for the removal of these hazardous, recalcitrant compounds. This process occurs under the action of a suitable catalyst, with the majority of current scientific research focused on heterogeneous systems. A significant area of research centres working on the development of an appropriate catalyst able to overcome the operating limitations associated with the homogeneous process is concerned with the short service life and difficulty in the separation/recovery of the catalyst from polluted water. This review highlights a present trend in the use of different materials as electro-Fenton catalysts for pharmaceutical compound removal from aquatic environments. The main challenges facing these technologies revolve around the enhancement of performance, stability for long-term use, life-cycle analysis considerations and cost-effectiveness. Although treatment efficiency has improved significantly, ongoing research efforts need to deliver economic viability at a larger scale due to the high operating costs, primarily related to energy consumption.

Iron-Loaded Catalytic Silicate Adsorbents: Synthesis, Characterization, Electroregeneration and Application for Continuous Removal of 1-Butylpyridinium Chloride

This research proposes the application of iron-loaded sepiolite (S-Fe) as a catalytic adsorbent for the unreported 1-butylpyridinium chloride ([bpy] Cl) treatment in an aqueous medium. Initially, sepiolite was selected as an inexpensive and efficacious adsorbent for [bpy] Cl elimination. After that, sepiolite was loaded with iron for the subsequent electro-Fenton (EF) regeneration treatment. Once kinetic and isotherm studies were performed, providing respectively almost instantaneous adsorption (20 min) and an uptake of 22.85 mg/g, [bpy] Cl adsorption onto S-Fe was studied in continuous mode. The obtained breakthrough curve was analyzed using three standard breakthrough models, being Yoon–Nelson and Thomas the most suitable adjustments. Afterwards, S-Fe regeneration by the EF process was conducted using this iron-loaded silicate material as a heterogeneous catalyst. Under optimized operational conditions (current intensity 300 mA and Na2SO4 0.3 M), complete adsorbent regeneration was achieved in 10 h. The total mineralization of [bpy] Cl was reached within 24 h and among seven carboxylic acids detected, oxalic and acetic acids seem to be the primary carboxylic acids produced by [bpy] Cl degradation. Finally, S-Fe was efficiently used in four consecutive adsorption–regeneration cycles without a noticeable reduction in its adsorption capacity, opening a path for future uses.

Nafcillin degradation by heterogeneous electro-Fenton process using Fe, Cu and Fe/Cu nanoparticles

Heterogeneous electro-Fenton (HEF) is as an alternative to the conventional electro-Fenton (EF) process. HEF uses a solid phase catalyst, whereas EF employs a solubilized one. This implies that in HEF, material can be recovered through a simple separation process such as filtration or magnetic separation in HEF. HEF also has the advantage of not requires a previous pH adjustment, which facilitates working in a higher pH range. In this work, Fe, Cu and Fe/Cu bimetallic nanoparticles (Fe/Cu NPs) were synthesized, characterized and used for the degradation of Nafcillin (NAF). The effect of the adsorption and the anodic oxidation (AO-H₂O₂) process was tested to assess their influence on HEF. NAF adsorption did not exceed 24% of antibiotic removal and the AO-H₂O₂ process eliminated the total NAF after 240 min of electrolysis. Through the HEF process, the antibiotic was completely removed using Fe/Cu NPs after 7.0 min of electrolysis, while these NPs, mineralization reached 41% after 240 min. In this case, NAF degradation occurs mainly due to the generation of hydroxyl radicals in the BDD electrode, and the Fenton reaction with Fe and Cu NPs. The main organic intermediates produced during the degradation of NAF by HEF were identified allowing the proposal of degradation pathway. Finally, the antibiotic was also completely eliminated from a wastewater from slaughterhouse after 15 min of treatment by HEF and using Fe/Cu bimetallic NPs.

Electro-generation of hydrogen peroxide using a graphite cathode from exhausted batteries: study of influential parameters on electro-Fenton process

In this work, the study of hydrogen peroxide (H₂O₂) electro-generation using graphite from exhausted batteries (Gr-Bat) was conducted. Linear sweep voltammetry and electrolysis experiments were carried out in a single compartment electrochemical cell. Study of the possibility to use this electrode revealed that it presents, as vitreous carbon (VC) electrode, a reduction of oxygen with two successive waves (bi-electronic reduction). The first wave corresponds to the reduction of O₂ to H₂O₂, while the second one corresponds to the reduction of H₂O₂ to H₂O. The cathodic potentials for electro-generation of H₂O₂ appeared at -600 and -700 mV vs. Ag/AgCl for Gr-Bat and VC electrodes, respectively. Subsequently, electrolysis experiments were conducted by imposing the potentials required for H₂O₂ formation. The effect of several operating parameters on H₂O₂ production, such as the nature and concentration of the electrolyte, the pH, the presence of ferrous ions and O₂ injection were studied using Gr-Bat and VC electrodes, respectively. For both electrodes, the acidic medium was more favorable for H₂O₂ electro-generation. The oxygen injection in solution promoted an increase of H₂O₂ concentration, but its effect was more pronounced in the case of VC electrode. Application for crystal violet degradation by electro-Fenton revealed that Gr-Bat had the best purification performance. A removal rate of 73.18% was obtained with Gr-Bat electrode against 62.27% with VC electrode for an electrolysis time of 120 min. This study has demonstrated the possibility of recycling Gr-Bat by using them as cathode materials in the electro-Fenton process.

Enhanced degradation of ibuprofen by heterogeneous electro-Fenton at circumneutral pH

Fenton based reactions are effective for pharmaceutical removals, but traditional Fenton processes have drawbacks of pH adjustment and large amount of produced iron sludge. To overcome these challenges, a heterogeneous electro-Fenton process was proposed for effective contaminant degradation at circumneutral pH without iron sludge production. The anti-inflammatory drug ibuprofen (a common pharmaceutical in natural waters) was used as a representative contaminant. Activated carbon fibers (ACFs) supported ferric citrate (Cit-Fe/ACFs) was synthesized and used as the cathode, and RuO₂/Ti was used as the anode. H₂O₂ was electro-generated in situ from O₂ reduction and the production rate of OH per unit area was 6.8 μM W^-1 cm^-2 using Cit-Fe/ACFs cathode. A maximal ibuprofen degradation of 97% was obtained after 120 min at the current density of 7 mA cm^-2. The electrical energy per order (E_EO) varied from 0.24±0.03 to 2.65±0.04 kWh log^-1 m^-3 when the current density ranged from 1 to 7 mA cm^-2. The Cit-Fe/ACFs cathode showed relatively good reusability and ∼85% IBP removal was achieved after 6 cycles of degradation. Our results showed that the prepared Cit-Fe/ACFs cathode was promising for the treatment of pharmaceutical contaminants.

Current advances and trends in electro-Fenton process using heterogeneous catalysts - A review

Over the last decades, advanced oxidation processes have often been used alone, or combined with other techniques, for remediation of ground and surface water pollutants. The application of heterogeneous catalysis to electrochemical advanced oxidation processes is especially useful due to its efficiency and environmental safety. Among those processes, electro-Fenton stands out as the one in which heterogeneous catalysis has been broadly applied. Thus, this review has introduced an up-to-date collation of the current knowledge of the heterogeneous electro-Fenton process, highlighting recent advances in the use of different catalysts such as iron minerals (pyrite, magnetite or goethite), prepared catalysts by the load of metals in inorganic and organic materials, nanoparticles, and the inclusion of catalysts on the cathode. The effects of physical-chemical parameters as well as the mechanisms involved are critically assessed. Finally, although the utilization of this process to remediation of wastewater overwhelmingly outnumber other utilities, several applications have been described in the context of regeneration of adsorbent or the remediation of soils as clear examples of the feasibility of the electro-Fenton process to solve different environmental problems.