Interconnected δ-MnO2 nanosheets anchored on activated carbon cloth as flexible electrode for high-performance aqueous asymmetric supercapacitors

MnO2-Catalyzed electrocatalytic mineralization of triclosan in chlorinated wastewater

The rising concentrations of xenobiotic aromatic compounds in the environment pose significant risks to human and ecosystem health. Developing a universal, environmentally benign, and scalable platform for mineralizing organic pollutants before their release into the environment is therefore crucial. Electrocatalysis can be highly advantageous for wastewater treatment because it is immediately responsive upon applying potential, requires no additional chemicals, and typically uses heterogeneous catalysts. However, achieving efficient electrochemical mineralization of wastewater pollutants at parts-per-million (ppm) levels remains a challenge. Here, we report the use of manganese dioxide (MnO2), an Earth-abundant, chemically benign, and cost-effective electrocatalyst, to achieve over 99 % mineralization of triclosan (TCS) and other halogenated phenols at ppm levels. Two highly active MnO2 phases-α-MnO2-CC and δ-MnO2-CC-were fabricated on inexpensive carbon cloth (CC) support and evaluated for their ability to oxidatively degrade TCS in pH-neutral conditions, including simulated chlorinated wastewater, real wastewater, and both synthetic and real landfill leachates. Total organic carbon analysis confirmed the effective degradation of TCS. Electron paramagnetic resonance and ultraviolet-visible spectroscopy identified reactive oxygen species, enabling the construction of a detailed TCS degradation pathway. Upon optimization, the TCS removal rate reached 38.38 nmol min-1, surpassing previously reported rates achieved with precious and toxic metal co-catalysts. These findings highlight MnO2-CC as a promising, eco-friendly electrocatalyst with strong potential for upscaled remediation of organic pollutants in wastewater treatment.

Physicochemical properties of different crystal forms of manganese dioxide prepared by a liquid phase method and their quantitative evaluation in capacitor and battery materials

Although there are many studies on the preparation and electrochemical properties of the different crystal forms of manganese dioxide, there are few studies on their preparation by a liquid phase method and the influence of their physical and chemical properties on their electrochemical performance. In this paper, five crystal forms of manganese dioxide were prepared by using manganese sulfate as a manganese source and the difference of their physical and chemical properties was studied by phase morphology, specific surface area, pore size, pore volume, particle size and surface structure. The different crystal forms of manganese dioxide were prepared as electrode materials, and their specific capacitance composition was obtained by performing CV and EIS in a three-electrode system, introducing kinetic calculation and analyzing the principle of electrolyte ions in the electrode reaction process. The results show that δ-MnO₂ has the largest specific capacitance due to its layered crystal structure, large specific surface area, abundant structural oxygen vacancies and interlayer bound water, and its capacity is mainly controlled by capacitance. Although the tunnel of the γ-MnO₂ crystal structure is small, its large specific surface area, large pore volume and small particle size make it have a specific capacitance that is only inferior to δ-MnO₂, and the diffusion contribution in the capacity accounts for nearly half, indicating it also has the characteristics of battery materials. α-MnO₂ has a larger crystal tunnel structure, but its capacity is lower due to the smaller specific surface area and less structural oxygen vacancies. ε-MnO₂ has a lower specific capacitance is not only the same disadvantage as α-MnO₂, but also the disorder of its crystal structure. The tunnel size of β-MnO₂ is not conducive to the interpenetration of electrolyte ions, but its high oxygen vacancy concentration makes its contribution of capacitance control obvious. EIS data shows that δ-MnO₂ has the smallest charge transfer impedance and bulk diffusion impedance, while the two impedances of γ-MnO₂ were the largest, which shows that its capacity performance has great potential for improvement. Combined with the calculation of electrode reaction kinetics and the performance test of five crystal capacitors and batteries, it is shown that δ-MnO₂ is more suitable for capacitors and γ-MnO₂ is more suitable for batteries.

In-situ construction of binder-free MnO2/MnSe heterostructure membrane for high-performance energy storage in pseudocapacitors

Manganese (Mn)-based oxides are considered suitable positive electrode materials for supercapacitors (SCs). However, their cycle stability and specific capacitance are significantly hindered by key restrictions such as structural instability and low conductivity. Herein, we demonstrated a novel nanorod (NR)-shaped heterostructured manganese dioxide/manganese selenide membrane (MnO2/MnSe) on carbon cloth (CC) (denoted as MnO2/MnSe-NR@CC) with a high aspect ratio by a straightforward and facile hydrothermal process. Experiments have demonstrated that doping selenium atoms to oxygen sites reduce electronegativity, increasing the intrinsic electronic conductivity of MnO2, decreasing electrostatic interactions with electrolyte ions, and thus boosting the reaction kinetics. Further, the selenium doping results in an amorphous surface with extensive oxygen defects, which contributed to the emergence of additional charge storage sites with pseudocapacitive characteristics. As expected, novel heterostructured MnO2/MnSe-NR@CC as an electrode for SC exhibits a high capacitance of 740.63 F/g at a current density of 1.5 A/g, with excellent cycling performance (93% capacitance retention after 5000 cycles). The MnO2/MnSe-NR@CC exhibited outstanding charge storage capability, dominating capacitive charge storage (84.6% capacitive at 6 mV/s). To examine the practical applications of MnO2/MnSe-NR@CC-ASC as a positive electrode, MnO2/MnSe-NR@CC//AC device was fabricated. The MnO2/MnSe-NR@CC//AC-ASC device performed exceptionally well, with a maximum capacitance of 166.66 F/g at 2 A/g, with a capacitance retention of 94%, after 500 GCD cycles. Additionally, it delivers an energy density of 75.06 Wh/kg at a power density of 1805.1 W/kg and maintains 55.044 Wh/kg at a maximum power density of 18,159 W/kg. This research sheds fresh information on the anionic doping method and has the potential to be applied to the synthesis of positive electrode materials for energy storage applications.

Oxygen vacancies refilling and potassium ions intercalation of δ-manganese dioxide with high structural stability toward 2.3 V high voltage asymmetric supercapacitors

Oxygen vacancies occupation and coordination environment modulation of the transition-metal based electrodes are effective strategies to improve the structural stability and electrochemical performance. In this work, the 2-methylimidazole (2-MI) doped manganese dioxide (MnO2) anchored on carbon cloth (CC) is fabricated via a simple method (MI-MnO2-x/CC), where the oxygen defects on/inside the K+ doped δ-MnO2 nanosheets are in-situ created by reductive ethanol/Mn2+ and occupied by 2-MI ligands. With the pre-embedded K+ ions and abundant ligand-refilled defects, the electronic coordination structure, structural stability and electron/ion diffusion efficiency can be effectively enhanced. Therefore, the MI-MnO2-x/CC reveals a remarkable specific capacitance of 721.2 mF cm-2 with excellent cycle durability (capacitance retention of 93.4% after 10,000 cycles) under 1.3 V operation potential window. In addition, an asymmetric supercapacitor assembled by MI-MnO2-x/CC and activated mechanical exfoliated graphene oxide yields a maximum energy density of 57.0 Wh kg-1 and a highest power density of 23.0 kW kg-1 under 2.3 V. This effective oxygen defect stabilization strategy by ligands refilling can be extended to various metal oxide-based electrodes for energy storage and conversion.

Hierarchical Activated Carbon-MnO2 Composite for Wide Potential Window Asymmetric Supercapacitor Devices in Organic Electrolyte

The consumption of electrical energy grows alongside the development of global industry. Generating energy storage has become the primary focus of current research, examining supercapacitors with high power density. The primary raw material used in supercapacitor electrodes is activated carbon (AC). To improve the performance of activated carbon, we used manganese dioxide (MnO₂), which has a theoretical capacitance of up to 1370 Fg^-1. The composite-based activated carbon with a different mass of 0-20% MnO₂ was successfully introduced as the positive electrode. The asymmetric cell supercapacitors based on activated carbon as the anode delivered an excellent gravimetric capacitance, energy density, and power density of 84.28 Fg^-1, 14.88 Wh.kg^-1, and 96.68 W.kg^-1, respectively, at 1 M Et₄NBF₄, maintaining 88.88% after 1000 test cycles.

Sodium Pre-Intercalation-Based Na3-δ-MnO2@CC for High-Performance Aqueous Asymmetric Supercapacitor: Joint Experimental and DFT Study

Electrochemical energy storage devices are ubiquitous for personal electronics, electric vehicles, smart grids, and future clean energy demand. SCs are EES devices with excellent power density and superior cycling ability. Herein, we focused on the fabrication and DFT calculations of Na₃-δ-MnO₂ nanocomposite, which has layered MnO₂ redox-active sites, supported on carbon cloth. MnO₂ has two-dimensional diffusion channels and is not labile to structural changes during intercalation; therefore, it is considered the best substrate for intercalation. Cation pre-intercalation has proven to be an effective way of increasing inter-layered spacing, optimizing the crystal structure, and improving the relevant electrochemical behavior of asymmetric aqueous supercapacitors. We successfully established Na⁺ pre-intercalated δ-MnO₂ nanosheets on carbon cloth via one-pot hydrothermal synthesis. As a cathode, our prepared material exhibited an extended potential window of 0-1.4 V with a remarkable specific capacitance of 546 F g^-1(300 F g^-1 at 50 A g^-1). Moreover, when this cathode was accompanied by an N-AC anode in an asymmetric aqueous supercapacitor, it illustrated exceptional performance (64 Wh kg^-1 at a power density of 1225 W kg^-1) and incomparable potential window of 2.4 V and 83% capacitance retention over 10,000 cycles with a great Columbic efficiency.

Transition Metal Oxide Electrode Materials for Supercapacitors: A Review of Recent Developments

In the past decades, the energy consumption of nonrenewable fossil fuels has been increasing, which severely threatens human life. Thus, it is very urgent to develop renewable and reliable energy storage devices with features of environmental harmlessness and low cost. High power density, excellent cycle stability, and a fast charge/discharge process make supercapacitors a promising energy device. However, the energy density of supercapacitors is still less than that of ordinary batteries. As is known to all, the electrochemical performance of supercapacitors is largely dependent on electrode materials. In this review, we firstly introduced six typical transition metal oxides (TMOs) for supercapacitor electrodes, including RuO₂, Co₃O₄, MnO₂, ZnO, XCo₂O₄ (X = Mn, Cu, Ni), and AMoO₄ (A = Co, Mn, Ni, Zn). Secondly, the problems of these TMOs in practical application are presented and the corresponding feasible solutions are clarified. Then, we summarize the latest developments of the six TMOs for supercapacitor electrodes. Finally, we discuss the developing trend of supercapacitors and give some recommendations for the future of supercapacitors.

Recent Studies on Supercapacitors with Next-Generation Structures

Supercapacitors have shown great potential as a possible solution to the increasing global demand for next-generation energy storage systems. Charge repositioning is based on physical or chemical mechanisms. There are three types of supercapacitors-the electrochemical double layer, the pseudocapacitor, and a hybrid of both. Each type is further subdivided according to the material used. Herein, a detailed overview of the working mechanism as well as a new method for capacitance enhancement are presented.