Photodegradation of pharmaceutical persistent pollutants using hydroxyapatite-based materials

Fluoxetine removal by anodic oxidation using different anode materials and graphite cathode

Fluoxetine (FLX) is a selective serotonin reuptake inhibitor (SSRI) medication commonly used to treat mental health disorders, but it can be harmful to the environment if not properly disposed of due to incomplete metabolism. In this study, electrochemical anodic oxidation with mixed metal oxide anodes was studied as a method to remove FLX from water and wastewater. Iridium dioxide-coated titanium (Ti/IrO2) and ruthenium dioxide-coated Ti (Ti/RuO2) electrodes were found to be more effective than platinum-coated Ti (Ti/Pt) electrodes, with removal efficiencies of 91.5% and 93.9%, respectively. Optimal conditions for FLX removal were determined to be an applied current of 150 mA, initial pH of 5, and oxidation time of 120 min. The rate of FLX degradation (kFLX) for the Ti/Pt, Ti/IrO2, and Ti/RuO2 electrodes were determined to be 0.0081 min-1 (R2:0,8161), 0.0163 min-1 (R2:0,9823), and 0.0168 (R2:0,9901) min-1 for 25 mg/L initial FLX concentration, respectively. The kFLX values varied based on the initial FLX concentration and decreased as the initial FLX concentration increased. The specific energy consumption (SEC) after 120 min of operation was 51.0 kWh/m3 for the Ti/Pt electrode, 39.6 kWh/m3 for the Ti/IrO2 electrode, and 48.6 kWh/m3 for the Ti/RuO2 electrode under optimised conditions. Overall, electrochemical anodic oxidation is an effective method for removing FLX from water and wastewater, with Ti/IrO2 and Ti/RuO2 electrodes providing superior performance compared to Ti/Pt electrodes.

Amplification of photocatalytic degradation of antibiotics (amoxicillin, ciprofloxacin) by sodium doping in nano-crystallite hydroxyapatite

In this research, we explain the production of sodium-doped hydroxyapatite (Na_HAp) via wet chemical precipitation, followed by crystal modification. To enhance its photocatalytic activity different % of (0.25, 0.5, 1, and 2) sodium doped into HAp crystal. It has been demonstrated that doping is an effective method for modifying the properties of nanomaterials, such as their optical performance and chemical reactivity. Several instrumental approaches were used to characterize this newly synthesized sodium-doped HAp (Na_HAp), e.g. scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and UV-vis spectrometry were used to analyze the morphology, elemental composition, crystal structure, and optical bandgap, respectively. Under sunlight irradiation, the new Na_HAp photocatalyst was put to use in the process of degrading pharmaceutical pollutants such as antibiotics (amoxicillin and ciprofloxacin). It was found that using a 0.1 g dose of 1% Na_HAp under specified conditions, such as a pH of 7 and 120 minutes of sunlight irradiation, resulted in degradation percentages of 60% and 41.59% for amoxicillin and ciprofloxacin, respectively. Different radical scavengers were utilized to determine the reaction mechanism for the photochemical degradation of antibiotics. Additionally, the ability to be reused and the stability of 1% Na_HAp, a newly developed photocatalyst, were assessed. Therefore, this research adds to our understanding of how to optimize redox capacity for the rapid breakdown of a variety of antibiotics when exposed to sunlight.

Photocatalyst of manganese ferrite and reduced graphene oxide supported on activated carbon from cow bone for wastewater treatment

The present research aimed to evaluate the photocatalytic activity of manganese ferrite (M) and reduced graphene oxide (G) supported on pulverized activated carbon from cow bone waste (PAC-MG). PAC-MG was characterized by different instrumental techniques. The efficiency of PAC-MG was evaluated using solar irradiation under different conditions of photocatalyst concentration, H2O2 concentration, and pH ranges for the discoloration of methylene blue dye (MB). The synergy between the nanomaterials potentiated the photocatalytic activity, reaching 85.5% of MB discoloration when using 0.25 g L-1 of catalyst at neutral pH with no oxidant needed. Furthermore, PAC-MG demonstrated excellent stability in 6 consecutive cycles. Finally, it is expected that the present study can add value to industrial waste and contribute to the development of novel water and wastewater treatment methods, ensuring water quality for human consumption and the environment.

Application of apatite particles for remediation of contaminated soil and groundwater: A review and perspectives

With rapid industrial development and population growth, the pollution of soil and groundwater has become a critical concern all over the world. Yet, remediation of contaminated soil and water remains a major challenge. In recent years, apatite has gained a surging interest in environmental remediation because of its high treatment efficiency, low cost, and environmental benignity. This review summarizes recent advances in: (1) natural apatite of phosphate ores and biological source; (2) synthesis of engineered apatite particles (including stabilized or surface-modified apatite nanoparticles); (3) treatment effectiveness of apatite towards various environmental pollutants in soil and groundwater, including heavy metals (e.g., Pb, Zn, Cu, Cd, and Ni), inorganic anions (e.g., As oxyanions and F-), radionuclides (e.g., thorium (Th), strontium (Sr), and uranium (U)), and organic pollutants (e.g., antibiotics, dyes, and pesticides); and (4) the removal and/or interaction mechanisms of apatite towards the different contaminants. Lastly, the knowledge or technology gaps are identified and future research needs are proposed.

Nano-crystallite bones of Oreochromis niloticus and Katsuwonus pelamis for the photocatalytic degradation of Congo red dye

The bones of two fish species, Oreochromis niloticus and Katsuwonus pelamis, were chosen in this research for evaluating their photocatalytic efficacy under solar radiation. The fish bones were isolated and conditioned before analyzing crystallographic parameters. The samples were characterized by using different instrumental techniques such as Fourier Transform Infrared (FTIR), X-ray diffraction (XRD), Energy Dispersive X-ray (EDX), Field Emission Scanning Electronic Microscopy (FESEM), and optical bandgap. From the XRD data, various types of crystallographic information such as crystallite size, microstrain, lattice parameters, dislocation density, degree of crystallinity, crystallinity index, Hydroxylapatite (HAp), the volume fraction of β-TCP, β-Tricalcium phosphate (β-TCP) percentage, and specific surface area were evaluated. Different model equations such as the Sahadat-Scherrer model, Linear Straight-line model, Monshi-Scherrer's method, and Williamson-Hall plot were employed to justify the nano-crystallite size. The photocatalytic efficacy of the two types of samples was explored by changing the catalyst concentration, dye concentration, interaction time, pH of the solution, etc. under solar irradiation.

Hydroxyapatite-based composites: Excellent materials for environmental remediation and biomedical applications

Given their unique characteristics and properties, Hydroxyapatite (HAp) nanomaterials and nanocomposites have been used in diverse advanced catalytic technologies and in the field of biomedicine, such as drug and protein carriers. This paper examines the structure and properties of the manufactured HAp as well as a variety of synthesis methods, including hydrothermal, microwave-assisted, co-precipitation, sol-gel, and solid-state approaches. Additionally, the benefits and drawbacks of various synthesis techniques and ways to get around them to spur more research are also covered. This literature discusses the various applications, including photocatalytic degradation, adsorptions, and protein and drug carriers. The photocatalytic activity is mainly focused on single-phase, doped-phase, and multi-phase HAp, while the adsorption of dyes, heavy metals, and emerging pollutants by HAp are discussed in the manuscript. Furthermore, the use of HAp in treating bone disorders, drug carriers, and protein carriers is also conferred. In light of this, the development of HAp-based nanocomposites will inspire the next generation of chemists to improve upon and create stable nanoparticles and nanocomposites capable of successfully addressing major environmental concerns. This overview's conclusion offers potential directions for future study into HAp synthesis and its numerous applications.

Individual and combined effect of ions species and organic matter on the removal of microcontaminants by Fe3+-EDDS/solar-light activated persulfate

This work is focused on improving the understanding of the complex water matrix interactions occurring during the removal of a microcontaminants mixture (acetamiprid, carbamazepine and caffeine) by solar/Fe³⁺-EDDS/persulfate process. The individual and combined effects of sulfates (100-500 mg/L), nitrates (20-160 mg/L), bicarbonates (77-770 mg/L) and chlorides (300-1500 mg/L) were assessed by comparing the outcomes obtained in different synthetic and actual water matrices. In general, the results showed negligible effects of the different anions on Fe³⁺-EDDS concentration and PS consumption profiles, while the combination of bicarbonates and chlorides seemed to be the key for the MC removal efficiency decrease found when working with complex matrixes. Finally, the influence of dissolved organic matter on process performance was evaluated. It was concluded that there is neither any influence of this variable on Fe³⁺-EDDS concentration and PS consumption profiles. In contrast, there was a general negative effect on MC removal efficiency, which strongly depended on both the concentration and composition of the dissolved organic matter.

Mechanism of visible light enhances microbial degradation of Bisphenol A

Bisphenol A (BPA) is a toxic endocrine disruptor detected in various environments. Microbial metabolic/enzymatic degradation has been thought to be the main pathway for BPA attenuation in natural environments. In this study, we found that under visible light conditions, superoxide produced by bacteria was the main reason for the rapid removal of BPA, accounting for 57 % of the total removal rate. With visible light, the bacteria degraded BPA at a rate of 0.22 mg/L/d, and the total removal within 8 days reached 85 %, which is 4.7 times compared with that of dark culture. The intermediate product 4-iso-propenylphenol, which was considered as an end-product of microbial degradation of BPA in previous reports, was detected in large quantities at 24 h in culture but gradually decreased in our experiment. Community analysis suggested bacteria with aromatic hydrocarbon degradation ability were more enriched under light incubation. Moreover, the bacteria showed well degradation ability to various pharmaceutically active but nonbiodegradable compounds including diclofenac and fluoxetine, with a removal rate of 88 % and 20 %, respectively. Our study revealed the organic pollutant transformation pathway under the combined action of light and microorganisms, providing new insights into the microbial treatment of aromatic hydrocarbon pollutants.

A Multifunctional Dental Resin Composite with Sr-N-Doped TiO2 and n-HA Fillers for Antibacterial and Mineralization Effects

Dental caries, particularly secondary caries, which is the main contributor to dental repair failure, has been the subject of extensive research due to its biofilm-mediated, sugar-driven, multifactorial, and dynamic characteristics. The clinical utility of restorations is improved by cleaning bacteria nearby and remineralizing marginal crevices. In this study, a novel multifunctional dental resin composite (DRC) composed of Sr-N-co-doped titanium dioxide (Sr-N-TiO2) nanoparticles and nano-hydroxyapatite (n-HA) reinforcing fillers with improved antibacterial and mineralization properties is proposed. The experimental results showed that the anatase-phase Sr-N-TiO2 nanoparticles were synthesized successfully. After this, the curing depth (CD) of the DRC was measured from 4.36 ± 0.18 mm to 5.10 ± 0.19 mm, which met the clinical treatment needs. The maximum antibacterial rate against Streptococcus mutans (S. mutans) was 98.96%, showing significant inhibition effects (p < 0.0001), which was experimentally verified to be derived from reactive oxygen species (ROS). Meanwhile, the resin exhibited excellent self-remineralization behavior in an SBF solution, and the molar ratio of Ca/P was close to that of HA. Moreover, the relative growth rate (RGR) of mouse fibroblast L929 indicated a high biocompatibility, with the cytotoxicity level being 0 or I. Therefore, our research provides a suitable approach for improving the antibacterial and mineralization properties of DRCs.

From Sewage Sludge to the Soil-Transfer of Pharmaceuticals: A Review

Sewage sludge, produced in the process of wastewater treatment and managed for agriculture, poses the risk of disseminating all the pollutants contained in it. It is tested for heavy metals or parasites, but the concentration of pharmaceuticals in the sludge is not controlled. The presence of these micropollutants in sludge is proven and there is no doubt about their negative impact on the environment. The fate of these micropollutants in the soil is a new and important issue that needs to be known to finally assess the safety of the agricultural use of sewage sludge. The article will discuss issues related to the presence of pharmaceuticals in sewage sludge and their physicochemical properties. The changes that pharmaceuticals undergo have a significant impact on living organisms. This is important for the implementation of a circular economy, which fits perfectly into the agricultural use of stabilized sewage sludge. Research should be undertaken that clearly shows that there is no risk from pharmaceuticals or vice versa: they contribute to the strict definition of maximum allowable concentrations in sludge, which will become an additional criterion in the legislation on municipal sewage sludge.

Light-Activated Hydroxyapatite Photocatalysts: New Environmentally-Friendly Materials to Mitigate Pollutants

This review focuses on a reasoned search for articles to treat contaminated water using hydroxyapatite (HAp)-based compounds. In addition, the fundamentals of heterogeneous photocatalysis were considered, combined with parameters that affect the pollutants’ degradation using hydroxyapatite-based photocatalyst design and strategies of this photocatalyst, and the challenges of and perspectives on the development of these materials. Many critical applications have been analyzed to degrade dyes, drugs, and pesticides using HAp-based photocatalysts. This systematic review highlights the recent state-of-the-art advances that enable new paths and good-quality preparations of HAp-derived photocatalysts for photocatalysis.

Application of natural minerals in photocatalytic degradation of organic pollutants: A review

Photocatalysis is an effective, inexpensive and environmentally friendly technology for the decomposition of various aqueous organic pollutants and plays an increasingly critical role in the degradation of pollutants. Natural minerals are abundant natural resources on Earth and can be obtained directly from nature. Natural minerals are excellent photocatalyst carriers that are environmentally friendly, low in price, and will not cause secondary pollution to the environment. Natural minerals have the characteristics of a large specific surface area, providing more active centres, and adsorbing pollutants to concentrate catalysis. Natural minerals are also excellent photocatalysts, such as haematite and magnetite, which play a very good role in the degradation of water pollutants. Studies that make full use of natural minerals are of great significance. This review covers the latest research on natural minerals as photocatalytic composite materials to degrade organic pollutants in water, including three parts: the classification of natural minerals, the structural description of natural mineral composites, and the photocatalytic degradation of organic pollutants by natural mineral composites. In addition, the current limitations and opinions of natural mineral composites are discussed to achieve better results in applying natural minerals.

Recent progress in green and biopolymer based photocatalysts for the abatement of aquatic pollutants

Enormous research studies on the abatement of anthropogenic aquatic pollutants including organic dyes, pesticides, cosmetics, antibiotics and inorganic species by using varieties of semiconductor photocatalysts have been reported in recent decades. Besides, many of these photocatalysts suffer in real applications owing to their high production cost and low stability. In many cases, the photocatalysts themselves are being considered as secondary pollutants. To eliminate these drawbacks, the green synthesized photocatalysts and the use of biopolymers as photocatalyst supports are considered in recent years. In this context, recent developments in green synthesized metals, metal oxides, other metal compounds, and carbon based photocatalysts in water purification are critically reviewed. Furthermore, the pivotal role of biopolymers including chitin, chitosan, cellulose, natural gum, hydroxyapatite, alginate in photocatalytic removal of aquatic pollutants is comprehensively reviewed. The presence of functional groups, electron trapping ability, biocompatibility, natural occurrence, and low production cost are the major reasons for using biopolymers in photocatalysis. Finally, the summary and conclusion are presented along with existing challenges in this research area.

Assessing the bioremediation potential of indigenously isolated Klebsiella sp. WAH1 for diclofenac sodium: optimization, toxicity and metabolic pathway studies

Among the various pharmaceutical pollutants, diclofenac sodium (DFS), a widely prescribed non-steroid anti-inflammatory drug is detected in the aquatic environment at concentrations which can be harmful to living organisms. Present study illustrates the isolation and characterization of strain Klebsiella pneumoniae WAH1 from activated sludge and its ability to degrade DFS as sole source of carbon and energy. The growth and degradation capacity of K. pneumoniae WAH1 under different conditions of pH, temperature, rotation speed, and inoculum age were evaluated using optical density and liquid chromatography-mass spectroscopy (LCMS). The results show that K. pneumoniae WAH1 can grow well with DFS as its sole source of carbon and degrade 79.14% of DFS (10 mg L^-1) within 72 h. Based on chemical structure of intermediates detected through LCMS, it is inferred that degradation pathway advanced by hydroxylation, decarboxylation, and dechlorination reactions. Toxicity studies revealed the non-toxic nature of the end-products of DFS degradation after 72 h. The findings suggest that K. pneumoniae WAH1 has an excellent potential for bioremediation of DFS in industrial wastewaters.

Effect of Ultrasound Irradiation on the Synthesis of Hydroxyapatite/Titanium Oxide Nanocomposites

Bioceramic materials, such as hydroxyapatite, Ca10(PO4)6(OH)2, (HAp), can be chemically bound to bone tissue; since they are bioactive and biocompatible. HAp, titanium oxide (TiO2), and hydroxyapatite/titanium oxide (HAp/TiO2) nanocomposite nanoparticles were obtained by ultrasound irradiation assisted by sol-gel and co-precipitation methods at different time intervals, using Ca(NO3)2•4H2O, (NH4)2HPO4, and TiOSO4•xH2O as calcium, phosphorus, and titanium sources, respectively. HAp, TiO2, and HAp/TiO2 nanocomposite powders were characterized by X-ray Diffraction (XRD) and Raman Spectroscopy. The percentages of anatase phase for TiO2 and of monoclinic and hexagonal phases for HAp were quantified by Rietveld refinement. Furthermore, sample crystallinity in each material was enhanced by increasing the ultrasound irradiation time. The nanoparticle shape was semi-spherical, agglomerated, and between 17 and 20 nm in size. The agglomeration of particles in the samples was corroborated with a Field Emission Scanning Electron Microscope (FESEM).

Photodegradation of Emerging Contaminant 2-(tiocyanomethylthio) Benzothiazole (TCMTB) in Aqueous Solution: Kinetics and Transformation Products

Direct photolysis of the emerging contaminant 2-(thiocyanomethylthio) benzothiazole (TMCTB) was performed in aqueous solution at different concentrations with high-pressure mercury lamp (5.0, 8.0, 13.0, 16.0, 20.0, 23.0, 27.0, 35.0, 40.0, 45.0, and 50.0 mg L^- 1) and with natural sunlight radiation (6.0, 30.0, and 60.0 mg L^- 1). TCMTB underwent rapid degradation by direct photolysis with a high-pressure mercury lamp in aqueous solutions, with 99% removal after 30 min at all concentrations studied. For sunlight photolysis, TCMTB degradation was observed with 96%, 81%, and 64% removal for initial concentrations of 6.0, 30.0, and 60.0 mg L^- 1, respectively, after 7 h of exposure to sunlight. The degradation of TCMTB in lab-scale wastewater had kinetic constant and t_1/2 in the same order when compared to the photodegradation of TCMTB in aqueous solutions. In addition, the results showed that photolysis with a high-pressure mercury lamp and sunlight were governed by the same kinetic order, however the kinetic parameters showed that degradation with sunlight was 40 times slower than photolysis with the mercury lamp. Twelve transformation products (TP) were identified, and eight of the TP have not been described in the literature. Furthermore, prediction of toxicity with ECOSAR software was carried out for fish, daphnids, and green algae species. It showed that photolytic treatment is efficient for reducing the toxicity of the compound, since the degradation formed compounds with lower toxicity than the primary compound. In conclusion, this study suggests that photolysis is an efficient way to remove the studied contaminant, and it highlights the potential of this technique for the degradation of emerging contaminants in industrial wastewater treatment plants.

Valorization of phosphate waste rocks to Ag3PO4/hydroxyapatite for photocatalytic degradation of Rhodamine B under visible light irradiation

A silver phosphate/hydroxyapatite (Ag₃PO₄/HA) composite was produced from phosphate waste rocks, firstly by the valorization of these wastes to HA and then by the treatment of this prepared HA with a silver nitrate solution. A type of response surface methodology, Box-Behnken experimental design, was used to find optimum synthesis parameters (silver to HA weight ratios, calcination temperature and calcination time). The visible light photodegradation of Rhodamine B in aqueous solution was used as the experimental response. The analysis of variance for the results showed that silver weight ratio is the most influential parameter on photoactivity of the synthesized photocatalyst. The optimum conditions were predicted to give an RhB degradation yield of 98.609%/4 hours under visible light conditions. In this context, a Ag/HA weight ratio of 14%, a calcination temperature of 300 °C, and a calcination time of 30 min were found to be the optimum conditions. Samples synthesized under the optimum condition were characterized by the use of X-ray diffraction, X-ray fluorescence spectrometer, Fourier transform infrared spectrum analysis, scanning electron microscopy, transmission electron microscopy and ultraviolet-visible diffuse reflection spectroscopy. By comparison with pure HA, the characterization results clearly showed the successful synthesis of the Ag₃PO₄/HA composite.

Hydroxyapatite, a multifunctional material for air, water and soil pollution control: A review

Hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂), a calcium phosphate biomaterial, is a very promising candidate for the treatment of air, water and soil pollution. Indeed, hydroxyapatite (Hap) can be extremely useful in the field of environmental management, due in one part to its particular structure and attractive properties, such as its great adsorption capacities, its acid-base adjustability, its ion-exchange capability and its good thermal stability. Moreover, Hap is able to constitute a valuable resource recovery route. The first part of this review will be dedicated towards presenting Hap's structure and defining properties that result in its viability as an environmental remediation material. The second will focus on its use as adsorbent for wastewater and soil treatment, while indicating the mechanisms involved in this remediation process. Finally, the last part will impart all findings on Hap's applications in the field of catalysis, whether it be as catalyst, as photocatalyst, or as active phase support. Hence, all of the above will have served in showcasing the benefits gained by employing hydroxyapatite in air, water and soil clean-up.

Highly efficient visible-light photoactivity of Z-scheme MoS2/Ag2CO3 photocatalysts for organic pollutants degradation and bacterial inactivation

Here, a novel Z-scheme MoS₂/Ag₂CO₃ heterojunction photocatalyst was assembled from two-dimensional MoS₂ nanosheets and Ag₂CO₃ nanoparticles through facile hydrothermal and in-situ precipitation method. The MoS₂/Ag₂CO₃ heterojunction exhibited much enhanced visible-light photocatalytic performance in probe experiment for organic pollutants degradation and Escherichia coli (E. coli) inactivation compared to pristine Ag₂CO₃ and MoS₂. The degradation rates of Lanasol Red 5B, rhodamine B, ciprofloxacin, and metronidazole reached 95%, 90%, 80%, and 72%, respectively. On the other hand, E. coli was completely inactivated in 80 min in the presence of 5%-MoS₂/Ag₂CO₃. The improved photocatalytic performance was ascribed to the enhanced photogenerated charge separation efficiency and increased lifetime of the charge carriers, proved by photoluminescence spectra, time-resolved fluorescence emission decay spectra, and electrochemical measures. In addition, the active species trapping and ESR experiments all indicated that holes (h⁺) exhibited a significant contribution and superoxide radicals (O₂^-) acted as assistants. Based on experiment results, the photocatalytic enhancement mechanism for organic pollutants degradation and E. coli inactivation was discussed. The effect of representative environmental factors on the degradation of Lanasol Red 5B was investigated. The experiment results indicated that the degradation efficiency was partially influenced in the presence of inorganic salt. Furthermore, the appearance of a small amount of Ag nanoparticles not only enhanced the charge transfer, but also improved the stability of photocatalyst. Overall, MoS₂/Ag₂CO₃ heterojunction has a great application potential for future water purification.

Features of diclofenac biodegradation by Rhodococcus ruber IEGM 346

This study investigated the ability of rhodococci to biodegrade diclofenac (DCF), one of the polycyclic non-steroidal anti-inflammatory drugs (NSAIDs) most frequently detected in the environment. Rhodococcus ruber strain IEGM 346 capable of complete DCF biodegradation (50 µg/L) over 6 days was selected. It is distinguished by the ability to degrade DCF at high (50 mg/L) concentrations unlike other known biodegraders. The DCF decomposition process was accelerated by adding glucose and due to short-term cell adaptation to 5 µg/L DCF. The most typical responses to DCF exposure observed were the changed ζ-potential of bacterial cells; increased cell hydrophobicity and total cell lipid content; multi-cellular conglomerates formed; and the changed surface-to-volume ratio. The obtained findings are considered as mechanisms of rhodococcal adaptation and hence their increased resistance to toxic effects of this pharmaceutical pollutant. The proposed pathways of bacterial DCF metabolisation were described. The data confirming the C-N bond cleavage and aromatic ring opening in the DCF structure were obtained.

Surface Separation Equilibria and Dynamics of Cationic Dye Loaded onto Citric Acid and Sodium Hydroxide Treated Eggshells

This research enthusiastically highlights the bio-adsorption of methylene blue (MB) by local, poultry, NaOH and citric acid modified ubiquitous eggshell (LES, NLES, CLES, PES, NPES and CPES) adsorbents. The microstructures of these adsorbents indicated that they had some surface functional moieties that were responsible for the adsorption of MB. The Langmuir isotherm and PSO model best fit the experiment data. The largest Langmuir monolayer adsorption capacity${q_{max}}$, was 242.47 mg/g, with the largest MB initial concentration of 400 mg/L. This was a clear indication and a confirmation that MB adsorption by the powdered eggshells was chemisorptive. Moreover, the values of$F$, the thickness of the boundary layer/film were$\gt 0$, showing that the rate limiting step for the adsorption process was controlled by more than one diffusion mechanism. The values of$\Delta {G^\circ }$for the adsorption of MB by the adsorbents indicated that the adsorption reactions were all non-feasible and non-spontaneous. The values for$\Delta {S^\circ }$(J/K/mol) for LES, NLES and CPES for the uptake of MB showed decrease in the chaos or degree of randomness of the adsorption reactions, and the reverse was the case for PES, NPES and CLES for the uptake of MB, which showed increase in the chaos or degree of randomness of the adsorption. The adsorption of MB by LES, NLES and CPES gave$\Delta {H^\circ }$(kJ/mol) values which were indicative of endothermic nature of the adsorption systems, and the reverse was the case for the uptake of MB by PES, NPES and CLES, which was indicative of the exothermic nature of the adsorption systems.

Fe-TiO2 Nanoparticles Synthesized by Green Chemistry for Potential Application in Waste Water Photocatalytic Treatment

Anatase TiO2 nanoparticles doped with iron ions have been synthesized via the green chemistry method using aqueous extract of lemongrass (Cymbopogon citratus) obtained from Soxhlet extraction and doped by wet impregnation. The TiO2 anatase phase has been doped with Fe3+ (0.05, 0.075, and 0.1 Fe3+ : Ti molar ratio) at 550°C and 350°C, respectively. The scanning electron microscopy with energy-dispersive X-ray (SEM-EDS) shows nanoparticle clusters and efficiencies of impregnations between 66.5 and 58.4% depending on the theoretical dopant amount. The electron transmission microscopy (TEM) reveals final particle sizes ranging between 7 and 26 nm depending on the presence or not of the dopant. The cathodoluminescence (CL) and photoluminescence (PL) studies of the doped and undoped nanoparticles show a luminescence signal attributed to surface oxygen vacancies (visible CL emission 380–700 nm and PL emission 350–800 nm); additionally, a decrease in emission intensity is observed due the inhibition of the recombination of the photogenerated electron-holes pairs; moreover, nanopowders were analyzed by UV-Vis spectrophotometry of diffuse reflectance, and the absorption edge of the Fe-TiO2 in comparison to undoped TiO2 is extended greatly toward the visible light. The six bands (A1g + 2B1g + 3Eg) found by Raman spectroscopy and the x-ray diffraction pattern (XRD) confirm that synthesized TiO2 is only anatase phase, which is commonly used as a catalyst in waste water treatment, specifically in heterogeneous photocatalytic processes.

Photocatalytic Degradation of Diclofenac by Hydroxyapatite⁻TiO₂ Composite Material: Identification of Transformation Products and Assessment of Toxicity

Diclofenac (DCF) is one of the most detected pharmaceuticals in environmental water matrices and is known to be recalcitrant to conventional wastewater treatment plants. In this study, degradation of DCF was performed in water by photolysis and photocatalysis using a new synthetized photocatalyst based on hydroxyapatite and TiO₂ (HApTi). A degradation of 95% of the target compound was achieved in 24 h by a photocatalytic treatment employing the HApTi catalyst in comparison to only 60% removal by the photolytic process. The investigation of photo-transformation products was performed by means of UPLC-QTOF/MS/MS, and for 14 detected compounds in samples collected during treatment with HApTi, the chemical structure was proposed. The determination of transformation product (TP) toxicity was performed by using different assays: Daphnia magna acute toxicity test, Toxi-ChromoTest, and Lactuca sativa and Solanum lycopersicum germination inhibition test. Overall, the toxicity of the samples obtained from the photocatalytic experiment with HApTi decreased at the end of the treatment, showing the potential applicability of the catalyst for the removal of diclofenac and the detoxification of water matrices.

Biodegradation of Diclofenac by the bacterial strain Labrys portucalensis F11

Diclofenac (DCF) is a widely used non-steroidal anti-inflammatory pharmaceutical which is detected in the environment at concentrations which can pose a threat to living organisms. In this study, biodegradation of DCF was assessed using the bacterial strain Labrys portucalensis F11. Biotransformation of 70% of DCF (1.7-34 μM), supplied as the sole carbon source, was achieved in 30 days. Complete degradation was reached via co-metabolism with acetate, over a period of 6 days for 1.7 µM and 25 days for 34 μM of DCF. The detection and identification of biodegradation intermediates was performed by UPLC-QTOF/MS/MS. The chemical structure of 12 metabolites is proposed. DCF degradation by strain F11 proceeds mainly by hydroxylation reactions; the formation of benzoquinone imine species seems to be a central step in the degradation pathway. Moreover, this is the first report that identified conjugated metabolites, resulting from sulfation reactions of DCF by bacteria. Stoichiometric liberation of chlorine and no detection of metabolites at the end of the experiments are strong indications of complete degradation of DCF by strain F11. To the best of our knowledge this is the first report that points to complete degradation of DCF by a single bacterial strain isolated from the environment.

Photocatalytic pathway toward degradation of environmental pharmaceutical pollutants: structure, kinetics and mechanism approach

During the last few years, the presence of pharmaceuticals in the aquatic environment, classified as so-called emerging contaminants, has attracted attention from the scientific community.