Synthesis optimization of oil palm empty fruit bunch and rice husk biochars for removal of imazapic and imazapyr herbicides

Bio-efficacy of imidazolinones in weed control in a tropical paddy soil amended with optimized agrowaste-derived biochars

Biochar is a black carbon sorbent that has the ability to stabilize organic substances in soil and, therefore, the potential to reduce their bio-availability. This sustainable material can be produced from locally-available agro wastes. The present study, for the first time, investigated the effects of biochars produced from oil palm empty fruit bunches (EFB) and rice husk (RH) on the efficiency of imazapic and imazapyr (two polar members of imidazolinone herbicides) as well as Onduty®, a mixture of them. It was executed in a Malaysian paddy field soil during a 30-day greenhouse experiment. The presence of optimized EFB and RH biochars in the heavy soil generally increases weed seeds germination and plants growth due to stabilization of the herbicides. The effect of EFB biochar was found higher than RH biochar having a higher affinity to the herbicides. An increase in the biochars application rates enhanced their effects as a soil modifier. Differences were more significant in the higher herbicides doses. Efficacies of all the herbicides were generally decreased in the biochar-amended soils. In the presence of 0.5% biochar in soil, the GR₅₀ values for all herbicides were almost similar to biochar-free soil. In a 1.0% biochar-soil mixture, GR₅₀ values of the herbicides increased by about 1.5 times. Bio-efficacies of the herbicides decreased by around 2.0 times as the biochar application rate enhanced to 2.0%. The greatest GR₅₀ values were obtained in the presence of 4.0% biochar in the soils and were about 7.0-8.5 folds, indicating the high capability of amended soil in the stabilization of the herbicides. The findings of this study can help to reduce imidazolinones' pollution and, in this way, prevent the threats of their residues to the environment.

Optimization of target biochar for the adsorption of target heavy metal ion

The purpose of this work is to study the pyrolysis conditions of target biochar suitable for target heavy metal ion, to characterize the optimized target biochar, and to study the adsorption performance of biochar. With Cu²⁺ and Zn²⁺ as the target pollutants, the pyrolysis conditions involved in the preparation process as pyrolysis temperature, pyrolysis time, and heating rate were evaluated and optimized from Box–Behnken Design (BBD), response surface methodology (RSM) and desirability function, the optimized pyrolysis conditions of target biochar for Cu²⁺ (Cu-BC) and Zn²⁺ (Zn-BC) were obtained. The optimum pyrolysis parameters for Cu-BC and Zn-BC were pyrolysis time of 3.09 and 2.19 h, pyrolysis temperature of 425.27 and 421.97 °C, and heating rate of 19.65 and 15.88 °C/min. The pseudo-second-order kinetic and Langmuir isotherm model proved to be the best fit for the equilibrium data, with a maximum adsorption capacity (Q_max) fitted by Langmuir model were 210.56 mg/g for Cu²⁺ by Cu-BC and 223.32 mg/g for Zn²⁺ by Zn-BC, which were both higher than the Q_max of unoptimized biochar (BC) for Cu²⁺ (177.66 mg/g) and Zn²⁺ (146.14 mg/g). The physical properties, chemical structure, surface chemistry properties of Cu-BC and Zn-BC were characterized by Zeta potential meter, Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). This study puts forward a new perspective for optimizing target biochar production for special environmental application.

A review of pesticides sorption in biochar from maize, rice, and wheat residues: Current status and challenges for soil application

The use of pesticides has been increasing in recent years for maintaining traditional agricultural practices. However, these chemicals are associated with several environmental impacts, demanding urgent remediation techniques. Biochar is a carbonaceous material produced by pyrolysis that has the potential for pesticide sorption and remediation. In this context, this interdisciplinary review systematically assessed the state of the knowledge of crop residues to produce biochar for pesticide sorption. We focused on maize, rice, and wheat residues since these are the three most-produced grains worldwide. Besides, we evaluated different biochar handling, storage, and soil dispersion techniques to ease its implementation in agriculture. In general, pyrolysis temperature influences biochar characteristics and its potential for pesticide sorption. Furthermore, biochar amended soils had greater pesticide sorption capacity, limiting potential leaching and runoff. Most studies showed that the feedstock and specific surface area influence the biochar sorption properties, among other factors. Also, biochar reduces pesticides' bioavailability, decreasing their toxicity to soil organisms and improving soil fertility and crop yields. Nonetheless, the retrieved papers assessed only 21 pesticides, mainly consisting of lab-scale batch experiments. Therefore, there is still a gap in studies evaluating biochar aging, its potential desorption, pesticide co-contaminations, the associated microbiological processes, and field applications. Determining flow properties for biochars of different sizes and pellets is vital for reliable handling equipment design, and performing techno-economic assessment under different farm contexts is encouraged. Ultimately, coupling biochar production with residue management could address this challenge on sustainable agricultural systems.

Physicochemical Properties of Membrane Adsorber from Palm Empty Fruit Bunch (PEFB) by Acid Activation

A membrane adsorbent was successfully made from palm empty fruit bunches (PEFB), which was pyrolysed as physical activation. The effect of adding the impact of one-step catalyst (hydrochloric acid) and differences in the concentration on the characteristics and structure and deconvolution are investigated in this study. The results of the research have been successfully created and characterised using Fourier-Transform Infrared (FTIR), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) isotherm, and membrane morphology using SEM test. Membrane performance testing was carried out using a biogas flame test. The adsorber membrane was made by adding NH₄Cl as a cationic surfactant, polyvinyl acetate (PVA), and polyethylene glycol (PEG) with a ratio of 1:3. The FTIR test has a functional group: O-H; C-H stretch; C=C-C; Arly O-Strech; C-O. Adsorbent membrane with the addition of 0.5 M HCl catalyst had the highest ratio of O-H/C=C-C relative area of 4.33. The diffractogram shows an amorphous structure with (002) and (100) graph planes. Adsorber membrane with a concentration of 1.5 M HCl has formed amorphous structured fibre. The adsorber membrane with a concentration of 0.5 HCl activator gave a surface area of 0.5345 m² g⁻¹ and a pore volume of 0.000983 cm³ g⁻¹.

Impact of rice straw biochar addition on the sorption and leaching of phenylurea herbicides in saturated sand column

The application of phenylurea herbicides (PUHs) may lead to the extensive distribution in soils, while the role of straw biochar as a soil amendment on the transport and sorption of PUHs are still unclear. Thus, the transport and sorption behavior of three typical PUHs with rice straw biochar (RSB) was studied in both adsorption simulation experiments of aqueous solution and packed column experiments. The sorption mechanism of RSB to herbicides was investigated through batch sorption studies with three influencing factors including dosage of RSB, pH, and ionic strength (IS) with orthogonal test. The sorption coefficients were improved significantly by increasing the dosage of RSB, while there was no obvious influence by enhancing the pH and IS value. The optimal sorption conditions (pH value at 3, IS at 0.1 M, and RSB dosage at 60 mg) of three herbicides were set and the maximum removal rates of Monuron, Diuron, and Linuron were 41.9%, 25%, and 56.8%, respectively. The co-transport process of RSB and PUHs were investigated under different RSB dosage, pH value, and IS value. The retention effect increased greatly with enhancing the RSB dosage and pH value. However, IS did not have a significant influence on the retention of RSB, and therefore it had little effect on the adsorption capacity, which was consistent with the results of sorption experiments. The breakthrough curves (BTCs) for co-transport were well simulated by the two-site non-equilibrium convection-dispersion equation (CDE). Most of the regression coefficients (R²) were above 0.99, which uncovered the co-transport in packed column were affected by physical absorption and chemical forces. According to the fitting parameters analysis, the RSB particles and PUHs were subjected to a greater resistance and a stronger stability by reducing pH value in porous media. The presence of RSB increased the amount of dynamic sorption sites in the entire co-transport system, which led to a significant promotion of the PUHs' sorption and interception.

Optimize the preparation of Fe3O4-modified magnetic mesoporous biochar and its removal of methyl orange in wastewater

In this paper, Eichhornia Crassipes stems were used as biomass feedstock, and Fe²⁺ was used as the precursor solution to prepare Fe₃O₄-modified magnetic mesoporous biochar (Fe₃O₄@BC). By using Box-Behnken design (BBD) response surface methodology, the influences of three preparation parameters (X₁ = Fe²⁺ concentration, X₂ = pyrolysis temperature and X₃ = pyrolysis time) on the adsorption of methyl orange (MO) by Fe₃O₄@BC were investigated, and a reliable response surface model was constructed. The results show that X₁X₂ and X₁X₃ have a significant influence on the adsorption of MO by Fe₃O₄@BC. The surface area and pore volume of Fe₃O₄@BC are controlled by all preparation parameters. The increase of pyrolysis time will significantly reduce the -OH on the surface of Fe₃O₄@BC and weaken its MO adsorption capacity. Through the numerical optimization of the constructed model, the optimal preparation parameters of Fe₃O₄@BC can be obtained as follows: Fe²⁺ concentration = 0.27 mol/L, pyrolysis temperature = 405 °C, and pyrolysis time = 3.2 h. The adsorption experiment shows that the adsorption of Fe₃O₄@BC to MO is a spontaneous exothermic process, and the adsorption capacity is maximum when pH = 4. The adsorption kinetics and adsorption isotherms of Fe₃O₄@BC to MO conform to the pseudo-second-order kinetics and Sips model, respectively. Mechanism analysis shows that electrostatic interaction and H bond formation are the main forces for Fe₃O₄@BC to adsorb MO. This research not only realizes a new way of resource utilization of Eichhornia Crassipes biomass but also enriches the preparation research of magnetic biochar.

A critical review of different factors governing the fate of pesticides in soil under biochar application

Pesticides are extensively used in the modern agricultural system. The inefficient and extensive use of pesticides during the last 5 to 6 decades inadvertently led to serious deterioration of environmental quality with health risk to living organisms, including humans. It is important to use some environmentally-friendly and sustainable approaches to remediate, restore and maintain soil quality. Biochar has gained considerable attention globally as a promising soil amendment because it has the ability to adsorb and as such minimize the bioavailability of pesticides in soils. This review emphasizes the recent trends and implications of biochar in pesticide-contaminated soils, as well as highlights need of the pesticides use and associated environmental issues in context of the biochar application. The overarching aim of this review is to signify the role of biochar on primary processes such as effect of biochar on the persistence, mineralization, leaching and efficacy of pesticides in soil. Notably, the effects of biochar on pesticide adsorption-desorption, degradation and bioavailability under various operating/production conditions are critically discussed. This review delineates the indirect impact of biochar on pesticides persistence in soils and proposes key recommendations for future research which are essential for the remediation and restoration of pesticides-impacted soils.

Degradation of imazapic and imazapyr herbicides in the presence of optimized oil palm empty fruit bunch and rice husk biochars in soil

Imidazolinones as a persistent and active herbicides group have potential risks to non-target organisms in the environment. Biochar is a carbon-rich sorbent used as an amendment to change soil properties and its microbial communities effective on pesticides degradation rate. The present study was the first to compare empty fruit bunch (EFB) of oil palm and rice husk (RH) biomasses as biochar feedstock for remediation of imidazolinones-contaminated soils. Degradations of imazapic, imazapyr, and a mixture of them (Onduty^®) was investigated in the presence of the optimized biochars in the soil during a 70-days incubation. Based on the results, the polar herbicides were resistant to hydrolysis degradation. Photolysis rates of the herbicides reduced significantly in the presence of the biochars in the soil. EFB biochar had greater effects due to its chemical compositions and surface functional groups. Photo-degradation of imazapyr was more affected by biochars amendment. The imidazolinones bio-degradation, however, accelerated significantly with the presence of EFB and RH biochars in soil with the greater effects of RH biochar. It was concluded that the application of the optimized EFB and RH biochars as an innovative sustainable strategy has the potential to decrease the persistence of the imidazolinones and minimize their environmental hazards.

Physical modification of biochar to expose the inner pores and their functional groups to enhance lead adsorption

Biochars have been successfully used to treat wastewater and contaminated soils. The efficiency of biochar as a biosorbent of heavy metals can be increased by reducing the particle size, exposing the inner pores and their functional groups. In this study, the empty fruit bunch biochar (EFBB) of oil palm was separated into three particle sizes, fine (F-EFBB < 50 μm), medium (M-EFBB 250–500 μm) and coarse (C-EFBB > 2000 μm) to compare their physical and chemical characteristics and their adsorption capacity for lead. Results revealed that the F-EFBB had greater surface area and exposed more micropores compared to the other particle sizes. Similarly, the F-EFBB had the most oxygen containing functional groups, CEC, and negative charges as measured by the zeta potential. The F-EFBB had the highest adsorption capacity for Pb, followed by M-EFBB and C-EFBB with the lowest. Therefore, the F-EFBB are able to adsorb more heavy metals as compared to M-EFBB and C-EFBB, as suggested by the more favourable physical and chemical characteristics.

Biochars have been successfully used to treat wastewater and contaminated soils.