Removal of metals from industrial wastewater and urban runoff by mineral and bio-based sorbents

Bio-Based Adsorption as Ecofriendly Method for Wastewater Decontamination: A Review

Intense human activities have for years contributed to the pollution of the environment by many dangerous pollutants such as heavy metals, pesticides, or polycyclic aromatic hydrocarbons. There are many conventional methods used to control pollution, with practical and/or financial drawbacks. Therefore, in recent years, an innovative, easy-to-implement and inexpensive adsorption method has been developed to recover waste and clean up water from micropollutants. Firstly, this article aims to summarize the issues related to water remediation and to understand the advantages and disadvantages of the methods classically used to purify water. In particular, this review aims to provide a recent update of the bio-based adsorbents and their use. Differently from the majority of the reviews related to wastewater treatment, in this article several classes of pollutants are considered. Then, a discussion about the adsorption process and interactions involved is provided. Finally, perspectives are suggested about the future work to be done in this field.

Effects of co-selection of antibiotic-resistance and metal-resistance genes on antibiotic-resistance potency of environmental bacteria and related ecological risk factors

The inadequate elimination of micropollutants in wastewater treatment plants (WWTP), cause to increase in the incidence of antibiotic resistant bacterial strains. Growth of microbial pathogens in WWTP is one of the serious public health problems. The widespread and simultaneous emergence of antibiotic resistance genes (ARGs) and heavy metal resistance genes (HMRGs) in the environment with heavy metals create persistent and selective pressure for co-selection of both genes on environmental microorganisms. Co-localization of ARGs and HMRGs on the same horizontal mobile genetic elements (MGEs) allows the spreading of numerous antibiotic-resistant strains of bacteria in aquatic and terrestrial environment. The biofilm formation and colonization potential of environmental bacteria leads to the co-selection of multi-antibiotic resistance and multi-metal tolerance. Horizontal gene transfer (HGT), co-localization of both ARGs and HMRGs on the same MGEs, and the shared resistomes are important bacteria-associated ecological risks factors, which reduce the effectiveness of antibiotics against bacterial infections.

Removal of antimony from model solutions, mine effluent, and textile industry wastewater with Mg-rich mineral adsorbents

Naturally occurring layered double hydroxide mineral, brucite (BRU), was compared with hydromagnesite (HYD) and a commercial Mg-rich mineral adsorbent (trade name AQM PalPower M10) to remove antimony (Sb) from synthetic and real wastewaters. The BRU and HYD samples were calcined prior to the experiments. The adsorbents were characterized using X-ray diffraction, X-ray fluorescence, and Fourier transform infrared spectroscopy. Batch adsorption experiments were performed to evaluate the effect of initial pH, Sb concentration, adsorbent dosage, and contact time on Sb removal from synthetic wastewater, mine effluent, and textile industry wastewater. Several isotherm models were applied to describe the experimental results. The Sips model provided the best correlation for the BRU and M10. As for the HYD, three models (Langmuir, Sips, and Redlich-Peterson) fit well to the experimental results. The results showed that the adsorption process in all cases followed the pseudo-second-order kinetics. Overall, the most efficient adsorbent was the BRU, which demonstrated slightly higher experimental maximum adsorption capacity (27.6 mg g-1) than the HYD (27.0 mg g-1) or M10 (21.3 mg g-1) in the batch experiments. Furthermore, the BRU demonstrated also an efficient performance in the continuous removal of Sb from mine effluent in the column mode. Regeneration of adsorbents was found to be more effective under acidic conditions than under alkaline conditions.

Modification of Natural Peat for Removal of Copper Ions from Aqueous Solutions

This study aimed at estimating peat adsorption properties for copper ion removal from aqueous solutions during peat modification. Two peat modifications have been studied using batch tests and quantitatively reproduced with instrumental analysis by using spectrometric, potentiometric, and thermodynamic modeling methods. The first variation—mechanical activation—was carried out in a planetary mill; for the second one—mechanochemical activation—dry sodium percarbonate (Na2CO3∙1.5H2O2) was added. The adsorption of copper ions was studied in the concentration range from 10–150 mg/L with an interaction time from 0.25–12 h. Both modifications led to significant changes in the interaction energy in the adsorption layer; thus, the acceptor properties of macromolecules were enhanced from natural peat to mechanically activated peat and mechanochemically activated peat. FTIR spectra, specific surface area characteristics, and sorption experiments show the predominantly chemical nature of copper sorption. Maximum adsorption capacity was determined to be 24.1, 42.1, and 16.0 mg/g for natural peat, mechanically activated peat, and mechanochemically activated peat, respectively. The example of peat mechanochemically oxidized with Na2CO3∙1.5H2O2 shows that the improvement in the physicochemical properties (CBET and specific surface area) plays a smaller role in the sorption capacity in relation to copper ions than the presence of phenolic and carboxyl groups, the content of which decreases during oxidation.

Relevance of sorption in bio-reduction of amoxicillin taking place in forest and crop soils

The fate of antibiotics reaching soils is a matter of concern, given its potential repercussions on public health and the environment. In this work, the potential bio-reduction of the antibiotic amoxicillin (AMX), affected by sorption and desorption, is studied for 17 soils with clearly different characteristics. To carry out these studies, batch-type tests were performed, adding increasing concentrations of AMX (0, 2.5, 5, 10, 20, 30, 40, and 50 μmol L^-1) to the soils. For the highest concentration added (50 μmol L^-1), the adsorption values for forest soils ranged from 90.97 to 102.54 μmol kg^-1 (74.21-82.41% of the amounts of antibiotic added), while the range was 69.96-94.87 μmol kg^-1 (68.31-92.56%) for maize soils, and 52.72-85.40 μmol kg^-1 (50.96-82.55%) for vineyard soils. When comparing the results for all soils, the highest adsorption corresponded to those more acidic and with high organic matter and non-crystalline minerals contents. The best adjustment to adsorption models corresponded to Freundlich's. AMX desorption was generally <10%; specifically, the maximum was 6.5% in forest soils, and 16.9% in agricultural soils. These results can be considered relevant since they cover agricultural and forest soils with a wide range of pH and organic matter contents, for an antibiotic that, reaching the environment as a contaminant, can pose a potential danger to human and environmental health.

Wastewater treatment plants as a reservoir of integrase and antibiotic resistance genes - An epidemiological threat to workers and environment

Conventional mechanical and biological wastewater treatment is unable to completely eliminate all pollutants, which can therefore enter surface water bodies together with treated wastewater. In addition, bioaerosols produced during wastewater treatment can pose a threat to the health of the wastewater treatment plant staff. In order to control the impact of a wastewater treatment plant (WWTP) on the surrounding environment, including its employees, samples of wastewater and water from a river which received treated wastewater were analysed in terms of their content of antibiotics and heavy metals, levels of selected physiochemical parameters, concentrations of antibiotic-resistance genes (ARGs) and genes of integrases. Furthermore, a quantitative analysis of ARGs in the metagenomic DNA from nasal and throat swabs collected from the WWPT employees was made. Both untreated and treated wastewater samples were dominated by genes of resistance to sulphonamides (sul1, sul2), MLS group of drugs (ermF, ermB) and beta-lactams (bla_OXA). A significant increase in the quantities of ARGs and concentrations of antibiotics was observed in the river following the discharge of treated wastewater in comparison to their amounts in the river water upstream from the point of discharge. Moreover, a higher concentration of ARGs was detected in the DNA from swabs obtained from the wastewater treatment plant employees than from ones collected from the control group. Many statistically significant (p < 0.05) correlations between the concentration of the gene of resistance to heavy metals cnrA versus ARGs, and between the ARGs content and the concentrations of heavy metals in both wastewater and river water samples were observed. The study has demonstrated that the mechanical and biological methods of wastewater treatment are not efficient and may affect the transmission of hazardous pollutants to the aquatic environment and to the atmospheric air. It has been shown that an activated sludge bioreactor can be a potential source of the presence of multi-drug resistant microorganisms in the air, which is a health risk to persons working in WWTPs. It has also been found that an environment polluted with heavy metals is where co-selection of antibiotic resistance may occur, in the development of which integrase genes play an essential role.

Sawdust, a versatile, inexpensive, readily available bio-waste: From mother earth to valuable materials for sustainable remediation technologies

Sawdust or wood shaving is a relatively abundant and inexpensive lignocellulosic compound, which is provided by mother nature. It is a waste of industry and agriculture, that is found in large quantities and has disposal problems. Nowadays, waste management (like sawdust) and research on converting it to different compounds for special applications and goals have been receiving tremendous attention. So, introducing sawdust as a kind of interesting bio-waste and turn it into wealth for diverse utilizations can be mentioned as the main goal of this overview. In this regard, in the first part, sawdust structure and properties are considered. It is then followed by highlighting its wide applications in sustainable water remediation technology, production of activated carbon, oil-water separation, and high-performance composites fabrication. Please come on to start a journey on this motivating topic.

Treatment efficiency of synthetic urban runoff by low-cost mineral materials under various flow conditions and in the presence of salt: Possibilities and limitations

Urban runoff belongs to important carriers of pollutants that during infiltration can accumulate in the soil/water environment. One of the protection solutions may be the enhancement of infiltration systems by horizontal permeable treatment zones. The article presents the results of column tests carried out in order to determine (1) the influence of the hydraulic loading rate on the dynamic capacities of selected reactive materials: low-cost mineral materials (zeolite, limestone sand, halloysite) and reference material (activated carbon), and control soils (topsoil and Vistula sand) against Zn, NH₄⁺ and PO₄^3-, and (2) remobilization of contaminants under the influence of salt (NaCl 5 g/L) present in synthetic runoff water. The research has revealed that the most useful for the removal of zinc ions was limestone sand (>4.36 mg/g), of orthophosphates - halloysite (2.29 mg/g on the average), and of ammonium ions - zeolite (2.75 mg/g on the average). The control soils were characterized by low ability to immobilize the contaminants tested. In addition, increase in the hydraulic loading rate of synthetic runoff water reduced the dynamic capacity of materials to a variable degree depending on the material applied and the contamination removed (by 24% for limestone sand-PO₄^3- system to 95% for activated carbon-NH₄⁺ system). The presence of NaCl caused significant leaching of ammonium ions from zeolite and halloysite filter beds (up to 99.3%), and phosphates from the activated carbon filter bed (up to 41.3%). All tracer contaminants tested leached intensively from the Vistula sand filter bed, while only ammonium ions leached from the topsoil filter bed. It seems justified to support the performance of infiltration systems by layers of: limestone sand, to enhance the processes of heavy metal precipitation and ammonium ion volatilization by increasing the pH, and halloysite for the sorption of phosphates.

Ibuprofen degradation using a Co-doped carbon matrix derived from peat as a peroxymonosulphate activator

The wider presence of pharmaceuticals and personal care products in nature is a major cause for concern in society. Among pharmaceuticals, the anti-inflammatory drug ibuprofen has commonly been found in aquatic and soil environments. We produced a Co-doped carbon matrix (Co-P 850) through the carbonization of Co²⁺ saturated peat and used it as a peroxymonosulphate activator to aid ibuprofen degradation. The properties of Co-P 850 were analysed using field emission scanning electron microscopy, energy filtered transmission electron microscopy and X-ray photoelectron spectroscopy. The characterization results showed that Co/Fe oxides were generated and tightly embedded into the carbon matrix after carbonization. The degradation results indicated that high temperature and slightly acidic to neutral conditions (pH = 5 to 7.5) promoted ibuprofen degradation efficiency in the Co-P 850/peroxymonosulphate system. Analysis showed that approx. 52% and 75% of the dissolved organic carbon was removed after 2 h and 5 h of reaction time, respectively. Furthermore, the existence of chloride and bicarbonate had adverse effects on the degradation of ibuprofen. Quenching experiments and electron paramagnetic resonance analysis confirmed that SO₄^·-, ·OH and O₂^·- radicals together contributed to the high ibuprofen degradation efficiency. In addition, we identified 13 degradation intermediate compounds and an ibuprofen degradation pathway by mass spectrometry analysis and quantum computing. Based on the results and methods presented in this study, we propose a novel way for the synthesis of a Co-doped catalyst from spent NaOH-treated peat and the efficient catalytic degradation of ibuprofen from contaminated water.

Isolation of Efficient Metal-Binding Bacteria from Boreal Peat Soils and Development of Microbial Biosorbents for Improved Nickel Scavenging

Boreal peatlands with low iron availability are a potential, but rarely studied, source for the isolation of bacteria for applications in metal sorption. The present research focused on the isolation and identification of Actinobacteria from northern Finland, which can produce siderophores for metal capture. The 16S rDNA analysis showed that isolated strains belonged to Firmicutes (Bacillus sp.) and Actinobacteria (Microbacterium sp.). The culture most efficiently producing siderophores in the widest array of the media was identified as Microbacterium sp. The most appropriate media for siderophore production by the Microbacterium strain were those prepared with glucose supplemented with asparagine or glutamic acid, and those prepared with glycerol or fructose supplemented with glutamic acid. The microorganism obtained and its siderophores were used to develop Sphagnum moss-based hybrid biosorbents. It was showed that the hybrid sorbent could bind nickel ions and that the nickel removal was enhanced by the presence of siderophores. Bacterial cells did not have a significant effect on sorption efficiency compared to the use of siderophores alone. The microbial biosorbent could be applied in the final effluent treatment stage for wastewater with low metal concentrations.

Optimum Operating Conditions for the Removal of Phosphate from Water Using of Wood-Branch Nanoparticles from Eucalyptus camaldulensis

A batch bio-sorption experiment was conducted on Eucalyptus camaldulensis Dehnh. wood-branch in the form of woody sawdust nanoparticles (nSD-KF) to evaluate their potential efficiency as phosphate bio-sorption capacity. The operating parameters of phosphate bio-sorption including contact time, initial concentration, pH, temperature, dosage, size, competing ion, and the possible mechanisms responsible for phosphate removal from water were investigated. The nSD-KF were green-synthesized by ball mill grinder and phosphate solutions with various concentrations were performed. The results revealed that the maximum adsorption capacity (qmax) value of nSD-KF was 50,000 µg/g. In addition, the removal efficiency of nSD-KF significantly increased with the increase of initial phosphate concentration, contact time, temperature, and dosage. However, it decreased with the increase of pH and in double-system solution with the presence of ammonium ions. At the application study, the nSD-KF successfully removed 87.82% and 92.09% of phosphate from real agricultural wastewater in a batch experiment and in a column experiment, respectively. Adsorption efficiency of nSD-KF for phosphate increased after the first and second regeneration cycles, but it decreased after the third and fourth cycles. The poor to moderate phosphate desorption from nSD-KF sorbent indicates the stability of phosphate bound to nSD-KF materials. Regardless, biodegradability of nSD-KF-loaded phosphate is possible, and it will be a good source of phosphate to a plant when added to the agricultural soil as a supplemental application of fertilizer. In conclusion, nSD-KF could be considered as a promising lignocellulosic biomaterial used for the removal of phosphate from waters as bio-sorption process.

Removal of metals from wastewaters by mineral and biomass-based sorbents applied in continuous-flow continuous stirred tank reactors followed by sedimentation

Numerous studies have examined the performance of mineral and biomass-based sorbents for metal removal under laboratory conditions, but few pilot-scale tests have been performed on possible water purification systems in which these sorbents can be used. This study addressed this issue by evaluating the suitability of selected sorbents for use in continuous-flow continuous stirred tank reactors (CSTR) followed by sedimentation in laboratory and in situ pilot-scale experiments. Acid (HCl)-modified peat (M-Peat), a commercially available mineral sorbent containing mainly magnesium (Mg) carbonates, Mg oxides and Mg silicates (Mineral-P) and a calcium-rich ground granular blast furnace slag (by-product of stainless steel production (Slag) were tested for treatment of metallurgical industry wastewater (laboratory, pilot). Overall, higher metal removal was achieved from samples with higher initial metal concentrations. M-Peat achieved good removal of Zn (50-70%) and Ni (30-50%) in laboratory and pilot experiments. However, the poor settling characteristics of M-Peat can restrict its application in systems where sedimentation is the solid-liquid separation process applied. Mineral-P showed good performance in removing 65-85% of Zn present in the water and it performed similarly in laboratory and pilot tests. However, low concentrations of As and Ni leached from Mineral-P in all tests. Slag achieved good performance in treatment of the industrial wastewater, removing 65-80% of Zn and 60-80% of Pb during pilot tests. However, low concentrations of Cr and Cu were leached from Slag in a few tests. As a by-product of the same (metallurgical) industry, ground granular blast furnace slag is an excellent candidate for reducing Zn concentrations from industrial wastewater flows.

Lignocellulose@ Activated Clay Nanocomposite with Hierarchical Nanostructure Enhancing the Removal of Aqueous Zn(II)

A lignocellulose@ activated clay (Ln@AC) nanocomposite with a hierarchical nanostructure was successfully synthesized by the chemical intercalation reaction and applied in the removal of Zn(II) from an aqueous solution. Ln@AC was characterized by N2 adsorption/desorption isotherms and X-Ray Diffraction (XRD), scanning Electron Microscope (SEM), transmission Electron Microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) analysis, and the results indicate that an intercalated-exfoliated hierarchical nanostructure was formed. The effects of different adsorption parameters on the Zn(II) removal rate (weight ratio of Ln to AC, Ln@AC dosage, initial Zn(II) concentration, pH value, adsorption temperature, and time) were investigated in detail. The equilibrium adsorption capacity reached 315.9 mg/g under optimal conditions (i.e., the weight ratio of Ln to AC of 3:1, Ln@AC dosage of 1 g/L, initial Zn(II) concentration of 600 mg/L, pH value of 6.8, adsorption temperature of 65 °C, and adsorption time of 50 min). The adsorption process was described by the pseudo-second-order kinetic model, Langmuir isotherm model, and the Elovich model. Moreover, Zn(II) could be easily eluted by HCl, and the effects of HCl concentration, desorption temperature, and ultrasonic desorption time on desorbed amount were tested. Desorption studies revealed that with an HCl concentration of 0.25 mol/L, desorption temperature of 70 °C, and ultrasonic desorption time of 20 min, the maximum desorption capacity and efficiency were achieved at 202.5 mg/g and 64.10%, respectively. Regeneration experimental results indicated that the Ln@AC exhibited a certain recyclable regeneration performance. Due to such outstanding features, the novel Ln@AC nanocomposite proved to have great adsorption potential for Zn(II) removal from wastewater, and exhibited an extremely significant amount of adsorbed Zn(II) when compared to conventional adsorbents.

Removal of metals from mine drainage waters by in situ mineral sorbent-based pilot filter systems

Discharge of metal-containing wastewater streams into the environment is an environmental concern because these pollutants do not degrade and tend to bioaccumulate. A number of laboratory-based investigations on the effectiveness of a wide range of filter materials for metal removal from diluted wastewater streams have been reported. However, only a few pilot or full-scale investigations have been conducted. Therefore, this study investigated the metal retention capabilities of mineral-based filter materials (commercially available mineral product (5-15 mm), recycled mineral material (2-4 mm) and slag by-product (2-4 and 4-16 mm)) when used in pilot-scale filter systems under continuous operation in a closed mining area in North Ostrobothnia, Finland, between June and October 2017. The influence of material particle size on system function and on metal retention efficiency was also evaluated. The results revealed that system performance was dependent on material composition and particle size (smaller particle size being more effective). The highest metal removal efficiencies (Zn, Ni, Cd, Cu and Pb) and largest amount of water treated (per volume of material applied) were achieved by an aluminium oxide-based recycled mineral material (2-4 mm). While smaller-grained materials performed better in terms of removal efficiency, the removal rates achieved by coarser-grained, commercially available mineral product (5-15 mm) were comparable to those achieved by small-grained slag (2-4 mm). Full-scale systems using the recycled mineral product (2-4 mm) would have an approximately two-fold longer material replacement time than systems using the slag (2-4 mm). Replacement time for the larger-grained materials tested could not be determined, due to problems with freezing. Overall, the recycled mineral material tested can be recommended for full-scale tests, especially when high zinc removal rates are required.

Enhanced Adsorption of Zn(II) onto Graphene Oxides Investigated Using Batch and Modeling Techniques

Graphene oxide (GO) was synthesized and employed as an adsorbent for Zn(II) removal from an aqueous solution. The adsorption isotherms showed that Zn(II) adsorption can be better described using the Freundlich model than the Langmuir model. The maximum adsorption capacity of Zn(II) on GO determined using the Langmuir model at pH 7.0 and 293 K was 208.33 mg/g. The calculation of thermodynamic parameters revealed that the process of Zn(II) adsorption on GO was chemisorptions, endothermic, and spontaneous. Kinetic studies indicated that the pseudo-second-order kinetic model showed a better simulation of Zn(II) adsorption than the pseudo-first-order kinetic model. On the basis of surface complexation modeling, the double layer model provided a satisfactory prediction of Zn(II) by inner-sphere surface complexes (for example, SOZn⁺ and SOZnOH species), indicating that the interaction mechanism between Zn(II) and GO was mainly inner-sphere complexation. In terms of reusability, GO could maintain 92.23% of its initial capability after six cycles. These findings indicated that GO was a promising candidate for the immobilization and preconcentration of Zn(II) from aqueous solutions.