Concurrent production of sodium lignosulfonate and ethanol from bagasse spent liquor

Modified lignin can achieve mitigation of ammonia and greenhouse gas emissions simultaneously in composting

The constant ammonia gas (NH3) and greenhouse gases (GHG) emissions were considered as a deep-rooted problem in composting which caused air pollution and global climate change. To achieve the mitigation of NH3 and GHG, a novel additive derived from wasted straw, with modified structure and functional groups, has been developed. Results showed that the adsorption capacity of modified lignin (ML) for both ammonium and nitrate was significantly increased by 132.5-360.8 % and 313.7-454.3 % comparing with biochar (BC) and phosphogypsum (PG) after reconstructing porous structure and grafting R-COOH, R-SO3H functional groups. The application of ML could reduce 36.3 % NH3 emission during composting compared with control. Furthermore, the synergetic mitigation NH3 and GHG in ML treatment resulted in a reduction of global warming potential (GWP) by 31.0-64.6 % compared with BC and PG. These findings provide evidence that ML can be a feasible strategy to effectively alleviate NH3 and GHG emissions in composting.

Fabrication of a Polybutylene Succinate (PBS)/Polybutylene Adipate-Co-Terephthalate (PBAT)-Based Hybrid System Reinforced with Lignin and Zinc Nanoparticles for Potential Biomedical Applications

Polybutylene adipate-co-terephthalate (PBAT) was used in an effort to improve the properties of polybutylene succinate (PBS). The resultant blend consisting of PBS/PBAT (70/30) was reinforced with lignin at different loadings (5 to 15 wt.%) and zinc (ZnO) nanoparticles (1.5 wt.%). Hot melt extrusion and injection moulding were used to prepare the hybrid composites. The mechanical, thermal, physical, self-cleaning, and antimicrobial properties of the resultant hybrid composites were investigated. The transmission electron microscopy (TEM) results confirmed that ZnO was successfully prepared with average diameters of 80 nm. Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) confirmed that there were interactions between the fillers and the blend. The tensile strength and elongation at the break of the resultant materials decreased with increasing the loadings, while the tensile modulus showed the opposite trend. The melting behaviour of the blend was practically unaffected by incorporating lignin and ZnO nanoparticles. In addition, the incorporation of fillers reduced the thermal stability of the materials. Furthermore, the incorporation of ZnO nanoparticles introduced photocatalytic properties into the polymer blend, rendering it to be a functional self-cleaning material and enhancing its antimicrobial activities.

Lignin-Mediated Silver Nanoparticle Synthesis for Photocatalytic Degradation of Reactive Yellow 4G and In Vitro Assessment of Antioxidant, Antidiabetic, and Antibacterial Activities

This study explored the potential of abundantly available sodium lignosulfonate (LS) as a reducer and fabricating agent in preparing silver nanoparticles (LS–Ag NPs). The operational conditions were optimized to make the synthesis process simpler, rapid, and eco-friendly. The prepared LS–Ag NPs were analyzed via UV–Vis spectroscopy, X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, and high-resolution transmission electron microscopy. Results demonstrated that LS–Ag NPs were of crystalline structure, capped with LS constituents, and spherical in shape with a size of approximately 20 nm. Under optimized conditions, LS–Ag NPs exhibited significant photocatalytic activity in Reactive Yellow 4G degradation. The effects of photocatalyst (LS–Ag NPs) dosage, dye concentration, and its reusability for dye degradation were studied to make the process practically applicable in textile wastewater treatment. Additionally, the synthesized LS–Ag NPs displayed significant free radical scavenging against 2-diphenyl-1-picrylhydrazyl (DPPH) with an IC₅₀ value of (50.2 ± 0.70 µg/mL) and also exhibited antidiabetic activity in terms of inhibition in the activity of carbohydrate-degrading marker enzyme α-glucosidase with an IC₅₀ value of (58.1 ± 0.65 µg/mL). LS–Ag NPs showed substantial antibacterial potential against pathogenic strains, namely E. coli and S. aureus. In conclusion, LS–Ag NPs can be a reliable and eco-friendly material for their possible application in the treatment of dye-containing wastewater and have a great perspective in the biomedical and pharmaceutical sectors.

Adaptation of Saccharomyces cerevisiae in a concentrated spent sulphite liquor waste stream for increased inhibitor resistance

The fermentation of spent sulphite liquor (SSL) from the pulping of hardwoods is limited by the combination of xylose, the primary fermentable sugar and high concentrations of microbial inhibitors that decrease the yeast fermentation ability. The inhibitor resistance phenotypes of xylose-capable Saccharomyces cerevisiae strains were therefore enhanced by combining rational engineering for multi-inhibitor tolerance, with adaptation in concentrated hardwood SSL as selective pressure. The adapted strains were assessed in fermentations with 60-80% v/v concentrated SSL under industrially relevant fermentation conditions. During adaptation, strains produced ethanol concentrations between 11.0 and 15.4 g/L in the range of that reported in literature. The adapted TFA40 and TP50 strains displayed enhanced inhibitor resistance phenotypes and were able to ferment xylose-rich SSL at pH below 5, exhibiting improved ethanol yields relative to the reference strain. Using yeast extract and peptone as nitrogen source in concentrated SSL fermentations further improved ethanol yields. However, strains exhibited a trade-off between resistance and ethanol productivity, indicating a carbon/energy cost for the expression of this inhibitor tolerance phenotype. KEY POINTS : • Achieved fermentation of xylose-rich hardwood spent sulphite liquor at pH below 5.0 • Adaptation of xylose-capable S. cerevisiae in concentrated spent sulphite liquor • Adapted strains exhibited enhanced inhibitor resistance phenotypes.

The Food-Materials Nexus: Next Generation Bioplastics and Advanced Materials from Agri-Food Residues

The most recent strategies available for upcycling agri-food losses and waste (FLW) into functional bioplastics and advanced materials are reviewed and the valorization of food residuals are put in perspective, adding to the water-food-energy nexus. Low value or underutilized biomass, biocolloids, water-soluble biopolymers, polymerizable monomers, and nutrients are introduced as feasible building blocks for biotechnological conversion into bioplastics. The latter are demonstrated for their incorporation in multifunctional packaging, biomedical devices, sensors, actuators, and energy conversion and storage devices, contributing to the valorization efforts within the future circular bioeconomy. Strategies are introduced to effectively synthesize, deconstruct and reassemble or engineer FLW-derived monomeric, polymeric, and colloidal building blocks. Multifunctional bioplastics are introduced considering the structural, chemical, physical as well as the accessibility of FLW precursors. Processing techniques are analyzed within the fields of polymer chemistry and physics. The prospects of FLW streams and biomass surplus, considering their availability, interactions with water and thermal stability, are critically discussed in a near-future scenario that is expected to lead to next-generation bioplastics and advanced materials.

Advances in Valorization of Lignocellulosic Biomass towards Energy Generation

The booming demand for energy across the world, especially for petroleum-based fuels, has led to the search for a long-term solution as a perfect source of sustainable energy. Lignocellulosic biomass resolves this obstacle as it is a readily available, inexpensive, and renewable fuel source that fulfills the criteria of sustainability. Valorization of lignocellulosic biomass and its components into value-added products maximizes the energy output and promotes the approach of lignocellulosic biorefinery. However, disruption of the recalcitrant structure of lignocellulosic biomass (LCB) via pretreatment technologies is costly and power-/heat-consuming. Therefore, devising an effective pretreatment method is a challenge. Likewise, the thermochemical and biological lignocellulosic conversion poses problems of efficiency, operational costs, and energy consumption. The advent of integrated technologies would probably resolve this problem. However, it is yet to be explored how to make it applicable at a commercial scale. This article will concisely review basic concepts of lignocellulosic composition and the routes opted by them to produce bioenergy. Moreover, it will also discuss the pros and cons of the pretreatment and conversion methods of lignocellulosic biomass. This critical analysis will bring to light the solutions for efficient and cost-effective conversion of lignocellulosic biomass that would pave the way for the development of sustainable energy systems.

Lignocellulosic hydrogel from recycled old corrugated container resources using ionic liquid as a green solvent

Lignocellulosic hydrogels are valuable bio-products that have been considered widely in recent investigations. Also, application of low value recycled fibers for high value added products can be of much interest. In this respect, current research has focused on producing hydrogel from recycled old corrugated container (OCC) resources, using 1-butyl-3-methyl-imidazolium chloride ionic liquid (IL) as a green solvent. The results indicated that the IL successfully dissolved OCC fibers, allowing the production of lignocellulosic hydrogel. Considering total water absorption amount as a main criterion for evaluation of hydrogels, the fabricated hydrogel showed promising results (up to 4700% water absorption). X-ray diffraction analysis confirmed obvious reduction in cellulose material crystallinity and crystallite size as a result of the process. Field emission scanning electron microscopy also demonstrated the microstructure of the hydrogel, pore size and shape in the hydrogel, which well supported the laboratory research results. Furthermore, the effect of processing parameters showed that specimens washed with distilled water as the anti-solvent resulted in the highest water absorption. Infrared spectroscopy can be used to suggest the presence of more lignin content in the hydrogel washed with ethanol. Moreover, the best water re-absorption results were observed for the hydrogel washed with distilled water.

Black liquor: A potential moistening agent for production of cost-effective hydrolytic enzymes by a newly isolated cellulo-xylano fungal strain Aspergillus tubingensis and its role in higher saccharification efficiency

In the present study, black liquor generated during mild alkali pre-treatment was evaluated as a moistening agent to produce cost effective hydrolytic enzymes using novel cellulo-xylano fungal strain Aspergillus tubingensis M7. The fungus competently produced 21.90 and 22.46 filter paper, 1004 and 1369 endoglucanase, 117 and 142 β-glucosidase and 8188 and 7981 U/g xylanase activity by using modified Mandel & weber's and black liquor medium, respectively. The crude hydrolytic enzymes from black liquor were evaluated for saccharification of pre-treated biomass. Reducing sugar yields (mg/g substrate) and the corresponding saccharification efficiency (%) from rice straw, corncob, sugarcane bagasse and banana stem were 745.50 (86.02; 18 h); 596 (74.50; 24 h); 358.15 (42.98; 24 h) and 245.70 (33.00; 24 h), respectively. Residual biomass compositional analysis revealed that reduced onset temperature, increased activation energy and pre-exponential factor in saccharified biomass as compared to pre-treated and untreated biomass, suggesting their utilization for pyrolysis to obtain value added products.

Characterization of Fast Pyrolysis Bio-Oil from Hardwood and Softwood Lignin

The depletion of fossil fuel reserves and the increase of greenhouse gases (GHG) emission have led to moving towards alternative, renewable, and sustainable energy sources. Lignin is one of the significant, renewable and sustainable energy sources of biomass and pyrolysis is one of the most promising technologies that can convert lignocellulosic biomass to bio-oil. This study focuses on the production and characterization of bio-oil from hardwood and softwood lignin via pyrolysis process using a bench-scale batch reactor. In this study, a mixed solvent extraction method with different polarities was developed to fractionate different components of bio-crude oil into three fractions. The obtained fractions were characterized by using gas chromatography and mass spectrometry (GCMS). The calculated bio-oil yields from Sigma Kraft lignin and Chouka Kraft lignin were about 30.2% and 24.4%, respectively. The organic solvents, e.g., toluene, methanol, and water were evaluated for chemical extraction from bio-oil, and it was found that the efficiency of solvents is as follows: water > methanol > toluene. In both types of the bio-oil samples, phenolic compounds were found to be the most abundant chemical groups which include phenol, 2-methoxy, 2-methoxy-6-methylphenol and phenol, 4-ethyl-2-methoxy that is due to the structure and the originality of lignin, which is composed of phenyl propane units with one or two methoxy groups (O-CH3) on the aromatic ring.

Effect of Paenibacillus cellulase pretreatment for fiber surface

Refining is the major process of paper formation. This study focuses on the impact of a specific enzyme (Paenibacillus cellulase) for fibers on the surfaces, the roughness and height of the fibers are also investigated. Effects of enzyme dosages and the mechanical refining action (PFI revolution) on fiber physical properties were also analyzed. The fibers were observed by scanning electron microscopy (SEM), their roughness and height were analyzed by Atomic force microscopy (AFM). Results show that the Paenibacillus cellulase pretreatment increased the drainability of both kinds of pulp at the same level of refining energy. In other words, enzymatic treatment on pulp refining consumed less refining revolutions to reach the same drainability compared to the untreated pulp. Although the viscosity of both kinds of pulp was degraded with the enzymatic treatment, the physical properties of paper had no significantly negative influence on them. The results indicated the treatment with cellulase swelled the fibers in the absence of refining, and there were better fibrillation on the fibers treated with cellulase after refining. Furthermore, the statistical analysis of AFM suggested that both kinds of pulp treated with low cellulase dosage with PFI refining had higher roughness.