Synthesis and applications of biogenic nanomaterials in drinking and wastewater treatment

The Effect of Composition on the Properties and Application of CuO-NiO Nanocomposites Synthesized Using a Saponin-Green/Microwave-Assisted Hydrothermal Method

In this study, we explored the formation of CuO nanoparticles, NiO nanoflakes, and CuO-NiO nanocomposites using saponin extract and a microwave-assisted hydrothermal method. Five green synthetic samples were prepared using aqueous saponin extract and a microwave-assisted hydrothermal procedure at 200 °C for 30 min. The samples were pristine copper oxide (100C), 75% copper oxide-25% nickel oxide (75C25N), 50% copper oxide-50% nickel oxide (50C50N), 25% copper oxide-75% nickel oxide (25C75N), and pristine nickel oxide (100N). The samples were characterized using FT-IR, XRD, XPS, SEM, and TEM. The XRD results showed that copper oxide and nickel oxide formed monoclinic and cubic phases, respectively. The morphology of the samples was useful and consisted of copper oxide nanoparticles and nickel oxide nanoflakes. XPS confirmed the +2 oxidation state of both the copper and nickel ions. Moreover, the optical bandgaps of copper oxide and nickel oxide were determined to be in the range of 1.29-1.6 eV and 3.36-3.63 eV, respectively, and the magnetic property studies showed that the synthesized samples exhibited ferromagnetic and superparamagnetic properties. In addition, the catalytic activity was tested against para-nitrophenol, demonstrating that the catalyst efficiency gradually improved in the presence of CuO. The highest rate constants were obtained for the 100C and 75C25N samples, with catalytic efficiencies of 98.7% and 78.2%, respectively, after 45 min.

Green rGO/FeNPs nanocomposites activated peroxydisulfate for the removal of mixed 17β-estradiol and estriol

Reduced graphene oxide/iron nanoparticles (rGO/FeNPs) synthesized by the chemical method have been used in Fenton oxidation of organic contaminants, yet little is known about biosynthesized rGO/FeNPs using green tea extract (GT) as how to activate persulfate in sulfate radical-based advanced oxidation processes. In this study, rGO/FeNPs were used to activate peroxydisulfate (PDS) for 17β-estradiol (βE2) and estriol (E3) removal. The rGO/FeNPs-PDS system removed 83.6% of βE2 and 62.5% of E3 within 240 min, which was confirmed by a combination of adsorption and degradation via both radical and non-radical pathways. Four main reactive species in βE2 and E3 degradation were observed, i.e., hydroxyl radical (·OH), sulfate radical (SO4·-), singlet oxygen (1O2) and electron transfer, with the respective contributions of ·OH (32.9 and 34.7%), SO4·- (16.1 and 19.7%), 1O2 (12.2 and 14.1%) and electron transfer (8.0 and 7.2%). Analysis of X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), Electron Paramagnetic Resonance (EPR) and electrochemical measurements all indicated that beside the well-known role of Fe, CO from rGO through the generation of ·OH, SO4·-, 1O2 and electron transfer, as well as GT through electron transfer also participated in the activation of PDS. Finally, the degradation pathways of βE2/E3 were proposed. Overall, this study provides a new insight into the biosynthesis of rGO/FeNPs to activate PDS for the oxidation of mixed emerging contaminants.

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

Synthesis of nano-hydroxyapatite using emulsion, pyrolysis, combustion, and sonochemical methods and biogenic sources: a review

Hydroxyapatite (HAp) is comparable to materials in bone because its chemical components are similar to those contained in animal bone, and thus, its bioactive and biocompatible properties are similar. There are applications for HAp and relevant calcium phosphate in the medical and industrial sectors, and due to the rising demand for HAp nanoparticles, considerable work has been performed to develop a variety of synthetic pathways that incorporate scientifically and practically novel aspects. Numerous studies have been conducted to examine how changes in reaction parameters will successfully influence crucial HAp features. HAp can also be synthesized from biogenic sources such as HAp-rich fish scales or animal bones as an alternative to chemical precursors. Various preparation techniques produce crystals with varying sizes, but it has been found that nano-sized HAp exhibits a greater number of bioactive properties as compared to micron-sized HAp. Rather than considering conventional methods, this review focuses on alternative approaches such as emulsion, pyrolysis, combustion, and sonochemical methods along with waste bio-sources (biogenic sources) to obtain HAp. We summarize the currently accessible information pertaining to each synthesis process, while also focusing on their benefits and drawbacks.

Mitigating Global Challenges: Harnessing Green Synthesized Nanomaterials for Sustainable Crop Production Systems

Green nanotechnology, an emerging field, offers economic and social benefits while minimizing environmental impact. Nanoparticles, pivotal in medicine, pharmaceuticals, and agriculture, are now sourced from green plants and microorganisms, overcoming limitations of chemically synthesized ones. In agriculture, these green-made nanoparticles find use in fertilizers, insecticides, pesticides, and fungicides. Nanofertilizers curtail mineral losses, bolster yields, and foster agricultural progress. Their biological production, preferred for environmental friendliness and high purity, is cost-effective and efficient. Biosensors aid early disease detection, ensuring food security and sustainable farming by reducing excessive pesticide use. This eco-friendly approach harnesses natural phytochemicals to boost crop productivity. This review highlights recent strides in green nanotechnology, showcasing how green-synthesized nanomaterials elevate crop quality, combat plant pathogens, and manage diseases and stress. These advancements pave the way for sustainable crop production systems in the future.

Carbon nanotube-wastewater treatment nexus: Where are we heading to?

Water treatment is crucial in solving the rising people's appetite for water and global water shortages. Carbon nanotubes (CNTs) have considerable promise for water treatment because of their adjustable and distinctive arbitrary, physical, as well as chemical characteristics. This illustrates the benefits and risks of integrating CNT into the traditional water treatment resource. Due to their outstanding adsorbent ability and chemical and mechanical properties, CNTs have gained global consideration in environmental applications. The desalination and extraction capability of CNT were improved due to chemical or physical modifications in pure CNTs by various functional groups. The CNT-based composites have many benefits, such as antifouling performance, high selectivity, and increased water permeability. Nevertheless, their full-scale implementations are still constrained by their high costs. Functionalized CNTs and their promising nanocomposites to eliminate contaminants are advised for marketing and extensive water/wastewater treatment.

Sequestration of Ni (II), Pb (II), and Zn (II) utilizing biogenic synthesized Fe3O4/CLPC NCs and modified Fe3O4/CLPC@CS NCs: Process optimization, simulation modeling, and feasibility study

The present study reports low-cost novel biogenic magnetite Citrus limetta peels carbon (Fe3O4/CLPC) nanocomposites and modified Fe3O4/CLPC@CS nanocomposites cross-linked with glutaraldehyde and subsequently employed in batch mode sequestration of heavy metals ions. Diverse techniques fully characterized them, and the influence of operating variables on adsorption reactions from aqueous solutions was investigated. The Brunauer, Emmett, and Teller (BET) surface areas of synthesized Fe3O4/CLPC and Fe3O4/CLPC@CS NCs were 53.91 and 32.16 m2/g, while the mesoporous diameters were 7.69 and 7.57 nm, respectively. The Langmuir isotherm and Pseudo second order kinetic were well-fitting and capable of explaining the adsorption reaction. The Langmuir-based monolayer adsorption (qmax) for Fe3O4/CLPC@CS NCs was 82.65, 95.24, and 64.10 mg/g, higher than Fe3O4/CLPC NCs, which were 70.92, 84.75, and 59.17 mg/g for Ni (II), Pb (II), and Zn (II), respectively. Each metal's pseudo second order correlation coefficient (R2 ≥ 0.99) reveals that nanocomposites surface binding functional groups controlled the adsorption rate via chemisorption. Further, thermodynamic results confirm that each studied metal ions' adsorption was spontaneous, endothermic, and characterized by an increase in randomness. In addition to magnetic separability, three ad-desorption cycles yielded exceptional adsorption efficacy and > 93% regenerability. The present study also reveals the effective utilization of Fe3O4/CLPC and Fe3O4/CLPC@CS NCs as cost-effective magnetic separable green adsorbents for heavy metals sequestration from electroplating wastewater.

Biogenic adsorbents for removal of drugs and dyes: A comprehensive review on properties, modification and applications

This comprehensive review explores the potential and versatility of biogenic materials as sustainable and environmentally benign alternatives to conventional adsorbents for the removal of drugs and dyes. Biogenic adsorbents derived from plants, animals, microorganisms, algae and biopolymers have bioactive compounds that interact with functional groups of pollutants, resulting in their binding with the sorbent. These materials can be modified mechanically, thermally and chemically to enhance their adsorption properties. Biogenic hybrid composites, which integrate the characteristics of more than one material, have also been fabricated. Additionally, microorganisms and algae are analyzed for their ability to uptake pollutants. Various influential factors that contribute to the adsorption process are also discussed. The challenge, limitations and future prospects for research are reviewed and bridging gap between large scale application and laboratory scale. This comprehensive review, involves a combination of various biogenic adsorbents, going beyond the existing literature where typically only specific adsorbents are reported. The review also covers the isotherms, kinetics, and desorption studies of biogenic adsorbents, providing an improved framework for their effective use in removing pharmaceuticals and dyes from wastewater.

Fabrication and response optimization of Moringa oleifera-functionalized nanosorbents for the removal of diesel range organics from contaminated water

The purpose of this research is to synthesize environmentally friendly nanosorbents for the novel adsorption of diesel range organics (DRO) from contaminated water. Central composite design (CCD) analysis of response surface methodology (RSM) was employed in a model fitting of the variables predicting the adsorption efficiency of Moringa oleifera-functionalized zerovalent iron particles (ZINPs) for the removal of DRO. The effects of the reaction parameters on the response were screened using 2⁴ factorial designs to determine the statistically significant independent variables. A quadratic model predicting the DRO adsorption efficiency of ZINPs with an F value of 276.84 (p value < 0.0001) was developed. Diagnostic plots show that the predicted values were in excellent agreement with actual experimental values (R² = 0.99). The maximum percentage removal of DRO of 92.6% was achieved after optimization, using the synthesized ZINPs after 8 h of contact between DRO substrates and ZINPs at pH of 8, the temperature of 25 °C, with an adsorbent dosage of 2 g/L and at composite desirability of 1. Characterization of ZINPs revealed the formation of quasi nanospheres and nanocubes with an average particle diameter of 50.9 ± 9.7, a crystallite size of 15.31 nm, a crystallinity index of 32.47% and a pore width of 75.69-88.59 nm. The adsorption equilibrium data modelling of ZINPs for adsorption of DRO was best described by Langmuir isotherm with the maximum monolayer coverage capacity of 7.194 mg/g. The separation factor [Formula: see text], indicated favourable adsorption. The adsorption kinetic data were consistent with pseudo-second-order kinetics indicating probable chemisorption.

A comprehensive review on removal of pollutants from wastewater through microbial nanobiotechnology -based solutions

Increasing wastewater pollution owing to the briskly rising human population, rapid industrialization, and fast urbanization has necessitated highly efficient wastewater treatment technologies. Although several methods of wastewater treatments are in practice, expensiveness, use of noxious chemicals, generation of unsafe by-products, and longer time consumption restrain their use to a great extent. Over the last few decades, nanotechnological wastewater treatment approaches have received widespread recognition globally. Microbially fabricated nanoparticles reduce the utilization of reducing, capping, and stabilizing agents, and exhibit higher adsorptive and catalytic efficiency than chemically synthesized nanomaterials. The present review comprehensively summarizes the applications of microbial nanotechnology in the removal of a wide range of noxious wastewater pollutants. Moreover, prospects and challenges associated with the integration of nanotechnology with other biological treatment technologies including algal-membrane bioreactor, aerobic digestion, microbial fuel cells, and microbial nanofiber webs have also been briefly discussed.

Removal effects and potential mechanisms of bisphenol A and 17α-ethynylestradiol by Biogenic Mn oxides generated by Bacillus sp. WH4

Endocrine disrupting compounds (EDCs), such as bisphenol A (BPA) and 17α-ethynylestradiol (EE2), have increasingly negative effects on human and wildlife health. In this study, the biogenic Mn oxides (BMOs) generated by Bacillus sp. WH4 were characterized, and the removal effects and reaction kinetics of BPA and EE2 by BMOs under different pH values, initial organic concentrations, and dosages of BMOs were discussed. The results showed that the formation of BMOs was extracellular process, and Mn(II) was oxidized to Mn(III) and Mn(IV) with 23.56% and 76.44%, respectively. The degradation processes of BPA and EE2 by BMOs followed first-order reaction kinetics, and the removal effect decreased with increasing initial BPA/EE2 concentrations and increased with increasing dosages of BMOs. However, the removal effect of BPA by BMOs decreased and then increased with increasing pH, while the removal effect of EE2 by BMOs decreased with increasing pH. Under optimal conditions, the removal efficiency of BPA and EE2 exceeded 98.2% and 94.3%, respectively. Additionally, this study showed that BMOs degraded BPA by coupling, oxidative condensation, substitution, and elimination reactions to obtain sixteen intermediate products and EE2 by substitution and elimination reactions to obtain seven intermediate products.

Application of Microbial Fuel Cell (MFC) for Pharmaceutical Wastewater Treatment: An Overview and Future Perspectives

Pharmaceutical wastewater (PWW) is rapidly growing into one of the world’s most serious environmental and public health issues. Existing wastewater treatment systems carry numerous loopholes in supplying the ever-increasing need for potable water resulting from rises in population, urbanization, and industrial growth, and the volume of wastewater produced is growing each day. At present, conventional treatment methods, such as coagulation, sedimentation, oxidation, membrane filtration, flocculation, etc., are used to treat PWW. In contrast to these, the application of microbial fuel cells (MFCs) for decontaminating PWW can be a promising technology to replace these methods. MFC technologies have become a trending research topic in recent times. MFCs have also garnered the interest of researchers worldwide as a promising environmental remediation technique. This review extensively discusses the flaws in standalone conventional processes and the integration of MFCs to enhance electricity production and contaminant removal rates, especially with respect to PWW. This article also summarizes the studies reported on various antibiotics and wastes from pharmaceutical industries treated by MFCs, and their efficiencies. Furthermore, the review explains why further research is needed to establish the actual efficiency of MFCs to achieve sustainable, environmentally friendly, and cost-effective wastewater treatment. A brief on technoeconomic impacts has also been made to provide a glimpse of the way these technologies might replace present-day conventional methods.

Emerging frontiers in microbe-mediated pesticide remediation: Unveiling role of omics and In silico approaches in engineered environment

The overuse of pesticides for augmenting agriculture productivity always comes at the cost of environment, biodiversity, and human health and has put the land, water, and environmental footprints under severe threat throughout the globe. Underpinning and maximizing the microbiome functions in pesticide-contaminated environments has become a prerequisite for a sustainable environment and resilient agriculture. It is imperative to elucidate the metabolic network of the microbial communities and environmental variables at the contaminated site to predict the best strategy for remediation and soil microbe-pesticide interactions. High throughput next-generation sequencing and in silico analysis allow us to identify and discern the members and characteristics of core microbiomes at the contaminated site. Integration of modern high throughput multi-omics investigations and informatics pipelines provide novel approaches and pathways to capitalize on the core microbiomes for enhancing environmental functioning and mitigation. The role of eco-genomics tools in visualising the microbial network, taxonomy, functional potential, and environmental variables in contaminated habitats is discussed in this review. The integrated role of the potential microbe identification as individual or consortia, mechanistic approach for pesticide degradation, identification of responsible enzymes/genes, and in silico approach is emphasized for the prospects of the area.

Prospects of algae-based green synthesis of nanoparticles for environmental applications

Green synthesis of nanoparticles (NPs) has emerged as an eco-friendly alternative to produce nanomaterials with diverse physical, chemical, and biological characteristics. Previously used, physical and chemical methods involve the production of toxic byproducts, costly instrumentation, and energy-intensive experimental processes thereby, limiting their applicability. Biogenic synthesis of nanoparticles has come forward as a potential alternative, providing an eco-friendly, cost-effective, and energy-efficient approach for the synthesis of a diverse range of NPs. Several biological entities are employed in the biosynthesis of NPs including bacteria, fungi, and algae. However, the distinguishing characteristics of microalgae and cyanobacteria make them promising candidates for NPs synthesis because of their higher growth rate, substantially higher rate of sequestering CO₂, hyperaccumulation of heavy metals, absence of toxic byproducts, minimum energy input, and employment of biomolecules (pigments and enzymes) as reducing and capping agents. Algal extract, being a natural reducing and capping agent, serves as a living cell factory for the efficient green synthesis of nanoparticles. Physiological and biological methods allow algal cells to uptake heavy metals and utilize them as nutrient source to generate biomass by regulating their metabolic processes. Despite their enormous potential, studies on the microalgae-based synthesis of nanoparticles for the removal of toxic pollutants from wastewater remained an unexplored research area in the literature. This review was aimed to summarize the recent advancements and prospects in the algae-based synthesis of nanoparticles for environmental applications particularly treating the wastewater.

Recent Trends and Advances of Co3O4 Nanoparticles in Environmental Remediation of Bacteria in Wastewater

Antibiotic resistance is a formidable global threat. Wastewater is a contributing factor to the prevalence of antibiotic-resistant bacteria and genes in the environment. There is increased interest evident from research trends in exploring nanoparticles for the remediation of antibiotic-resistant bacteria. Cobalt oxide (Co3O4) nanoparticles have various technological, biomedical, and environmental applications. Beyond the environmental remediation applications of degradation or adsorption of dyes and organic pollutants, there is emerging research interest in the environmental remediation potential of Co3O4 nanoparticles and its nanocomposites on antibiotic-resistant and/or pathogenic bacteria. This review focuses on the recent trends and advances in remediation using Co3O4 nanoparticles and its nanocomposites on antibiotic-resistant or pathogenic bacteria from wastewater. Additionally, challenges and future directions that need to be addressed are discussed.

Antibiotic Resistance in the Drinking Water: Old and New Strategies to Remove Antibiotics, Resistant Bacteria, and Resistance Genes

Bacterial resistance is a naturally occurring process. However, bacterial antibiotic resistance has emerged as a major public health problem in recent years. The accumulation of antibiotics in the environment, including in wastewaters and drinking water, has contributed to the development of antibiotic resistant bacteria and the dissemination of antibiotic resistance genes (ARGs). Such can be justified by the growing consumption of antibiotics and their inadequate elimination. The conventional water treatments are ineffective in promoting the complete elimination of antibiotics and bacteria, mainly in removing ARGs. Therefore, ARGs can be horizontally transferred to other microorganisms within the aquatic environment, thus promoting the dissemination of antibiotic resistance. In this review, we discuss the efficiency of conventional water treatment processes in removing agents that can spread/stimulate the development of antibiotic resistance and the promising strategies for water remediation, mainly those based on nanotechnology and microalgae. Despite the potential of some of these approaches, the elimination of ARGs remains a challenge that requires further research. Moreover, the development of new processes must avoid the release of new contaminants for the environment, such as the chemicals resulting from nanomaterials synthesis, and consider the utilization of green and eco-friendly alternatives such as biogenic nanomaterials and microalgae-based technologies.

Rational design of biogenic PdxAuy nanoparticles with enhanced catalytic performance for electrocatalysis and azo dyes degradation

The green biogenic PdAu nanoparticles (bio-PdAu NPs) exhibits remarkable catalytic performance in hydrogenation, which is highly desired. However, the catalytic principles and effectiveness of bio-Pd^xAu^y NPs in response to various catalytic systems (electrocatalysis and suspension-catalysis) are unclear. Herein, a facile synthetic strategy for bio-Pd^xAu^y NPs synthesis with controlled size and the catalytic principles for hydrogen evolution reaction (HER) and azo dye degradation is reported. In the biosynthetic process, the size and composition of the bio-Pd^xAu^y NPs could be precisely controlled by predesigning the precursor mass ratio of Pd/Au, and the Au proportion showed a linear relationship with the size of NPs (R² = 0.92). The obtained bio-Pd^xAu^y NPs exhibit variable activity in electrocatalysis (HER) and suspension-catalysis (azo dye degradation). For electrocatalysis, the formation of conductive networks that facilitates the extracellular electron transfer is crucial. It was revealed that the bio-Pd²Au⁸ exhibited superior electrocatalytic performance in HER/toward hydrogen evolution, with a maximum current density of 1.65 mA cm^-2, which was 1.54 times higher than that commercial Pd/C (1.07 mA cm^-2). The high electrocatalytic activity was attributed to its appropriate size (81.38 ± 6.14 nm) and uniform distribution on the cell surface, which promoted the extracellular electron transfer by constructing a conductive network between catalyst and electrode. However, for suspension-catalysis, the size effect and synergistic effect of bimetallic NPs have a more prominent effect on the degradation of azo dyes. As the increase of Au proportion the particle size decreases, and the catalytic activity of bio-Pd^xAu^y improved significantly. The response principles of bio-Pd^xAu^y proposed in this study provide a reliable reference for the rational design of bio-based bimetallic catalysts with enhanced catalytic performance.

Current solid waste management strategies and energy recovery in developing countries - State of art review

Solid waste generation has rapidly increased due to the worldwide population, urbanization, and industrialization. Solid waste management (SWM) is a significant challenge for a society that arises local issues with global consequences. Thus, solid waste management strategies to recycle waste products are promising practices that positively impact sustainable goals. Several developed countries possess excellent solid waste management strategies to recycle waste products. Developing countries face many challenges, such as municipal solid waste (MSW) sorting and handling due to high population density and economic instability. This mismanagement could further expedite harmful environmental and socioeconomic concerns. This review discusses the current solid waste management and energy recovery production in developing countries; with statistics, this review provides a comprehensive revision on energy recovery technologies such as the thermochemical and biochemical conversion of waste with economic considerations. Furthermore, the paper discusses the challenges of SWM in developing countries, including several immediate actions and future policy recommendations for improving the current status of SWM via harnessing technology. This review has the potential of helping municipalities, government authorities, researchers, and stakeholders working on MSW management to make effective decisions for improved SWM for achieving sustainable development.

Bacterial biofilm infections, their resistance to antibiotics therapy and current treatment strategies

Nearly 80% of human chronic infections are caused due to bacterial biofilm formation. This is the most leading cause for failure of medical implants resulting in high morbidity and mortality. In addition, biofilms are also known to cause serious problems in food industry. Biofilm impart enhanced antibiotic resistance and become recalcitrant to host immune responses leading to persistent and recurrent infections. It makes the clinical treatment for biofilm infections very difficult. Reduced penetration of antibiotic molecules through EPS, mutation of the target site, accumulation of antibiotic degrading enzymes, enhanced expression of efflux pump genes are the probable causes for antibiotics resistance. Accordingly, strategies like administration of topical antibiotics and combined therapy of antibiotics with antimicrobial peptides are considered for alternate options to overcome the antibiotics resistance. A number of other remediation strategies for both biofilm inhibition and dispersion of established biofilm have been developed. The metallic nanoparticles and their oxides have recently gained a tremendous thrust as antibiofilm therapy for their unique features. This present comprehensive review gives the understanding of antibiotic resistance mechanisms of biofilm and provides an overview of various currently available biofilm remediation strategies, focusing primarily on the applications of metallic nanoparticles and their oxides.

Biogenic metal nanoparticles with microbes and their applications in water treatment: a review

Due to their unique characteristics, nanomaterials are widely used in many applications including water treatment. They are usually synthesized via physiochemical methods mostly involving toxic chemicals and extreme conditions. Recently, the biogenic metal nanoparticles (Bio-Me-NPs) with microbes have triggered extensive exploration. Besides their environmental-friendly raw materials and ambient biosynthesis conditions, Bio-Me-NPs also exhibit the unique surface properties and crystalline structures, which could eliminate various contaminants from water. Recent findings in the synthesis, morphology, composition, and structure of Bio-Me-NPs have been reviewed here, with an emphasis on the metal elements of Fe, Mn, Pd, Au, and Ag and their composites which are synthesized by bacteria, fungi, and algae. Furthermore, the mechanisms of eliminating organic and inorganic contaminants with Bio-Me-NPs are elucidated in detail, including adsorption, oxidation, reduction, and catalysis. The scale-up applicability of Bio-Me-NPs is also discussed.

Advances in the Application of Nanocatalysts in Photocatalytic Processes for the Treatment of Food Dyes: A Review

The use of food additives (such as dyes, which improve the appearance of the products) has become more prominent, due to the rapid population growth and the increase in demand for beverages and processed foods. The dyes are usually found in effluents that are discharged into the environment without previous treatment; this promotes mass contamination and alters the aquatic environment. In recent years, advanced oxidation processes (AOPs) have proven to be effective technologies used for wastewater treatment through the destruction of the total organic content of toxic contaminants, including food dyes. Studies have shown that the introduction of catalysts in AOPs improve treatment efficiency (i.e., complete decomposition without secondary contamination). The present review offers a quick reference for researchers, regarding the treatment of wastewater containing food dyes and the different types of AOPs, with different catalyst and nanocatalyst materials obtained from traditional and green chemical syntheses.

Milking microalgae in conjugation with nano-biorefinery approach utilizing wastewater

In today's era, we need to replace chemical or physical processes of nanoparticle synthesis with biosynthesis processes to avoid environmental damage. These bioderived nanoparticles can help in addressing the problems of wastewater treatment and biofuels production. This review gives an insight into solving multiple problems using a nano-biorefinery approach in conjugation with wastewater treatment. The major advantage of using a bio-derivative method in nanoparticle synthesis is its low toxicity towards the environment. The current review discusses the development of nanoscience and its biogenic importance. It covers the usage of microalgae for (A) Nanoparticle's biosynthesis (B) Mechanism of nanoparticle biosynthesis (C) Nanoparticles in bio-refinery processes (D) Wastewater treatment with microalgae and bio-derived nanoparticles (E) A hypothetical mechanistic approach, which utilizes the photothermal effect of metallic nanoparticles to extract lipids from the cells without cell damage. The term "cell milking" has been around for quite some time, and the hypothesis discussed in the present study can help in this context. The current hypothesized process can pave ways for futuristic endeavors to conjugate nanoparticles and microalgae for viable and commercial production of biofuel, nanoparticles, and many other molecules.

Bioinspired Nanomodification Strategies: Moving from Chemical-Based Agrosystems to Sustainable Agriculture

Agrochemicals have supported the development of the agricultural economy and national population over the past century. However, excessive applications of agrochemicals pose threats to the environment and human health. In the last decades, nanoparticles (NPs) have been a hot topic in many fields, especially in agriculture, because of their physicochemical properties. Nevertheless, the prevalent methods for fabricating NPs are uneconomical and involve toxic reagents, hindering their extensive applications in the agricultural sector. In contrast, inspired by biological exemplifications from microbes and plants, their extract and biomass can act as a reducing and capping agent to form NPs without any toxic reagents. NPs synthesized through these bioinspired routes are cost-effective, ecofriendly, and high performing. With the development of nanotechnology, biosynthetic NPs (bioNPs) have been proven to be a substitute strategy for agrochemicals and traditional NPs in heavy-metal remediation of soil, promotion of plant growth, and management of plant disease with less toxicity and higher performance. Therefore, bioinspired synthesis of NPs will be an inevitable trend for sustainable development in agricultural fields. This critical review will demonstrate the bioinspired synthesis of NPs and discuss the influence of bioNPs on agricultural soil, crop growth, and crop diseases compared to chemical NPs or agrochemicals.

Extremophilic Exopolysaccharides: Biotechnologies and Wastewater Remediation

Various microorganisms thrive under extreme environments, like hot springs, hydrothermal vents, deep marine ecosystems, hyperacid lakes, acid mine drainage, high UV exposure, and more. To survive against the deleterious effect of these extreme circumstances, they form a network of biofilm where exopolysaccharides (EPSs) comprise a substantial part. The EPSs are often polyanionic due to different functional groups in their structural backbone, including uronic acids, sulfated units, and phosphate groups. Altogether, these chemical groups provide EPSs with a negative charge allowing them to (a) act as ligands toward dissolved cations as well as trace, and toxic metals; (b) be tolerant to the presence of salts, surfactants, and alpha-hydroxyl acids; and (c) interface the solubilization of hydrocarbons. Owing to their unique structural and functional characteristics, EPSs are anticipated to be utilized industrially to remediation of metals, crude oil, and hydrocarbons from contaminated wastewaters, mines, and oil spills. The biotechnological advantages of extremophilic EPSs are more diverse than traditional biopolymers. The present review aims at discussing the mechanisms and strategies for using EPSs from extremophiles in industries and environment bioremediation. Additionally, the potential of EPSs as fascinating biomaterials to mediate biogenic nanoparticles synthesis and treat multicomponent water contaminants is discussed.

Artificial neural networks modeling for lead removal from aqueous solutions using iron oxide nanocomposites from bio-waste mass

Heavy metal ions in aqueous solutions are taken into account as one of the most harmful environmental issues that ominously affect human health. Pb(II) is a common pollutant among heavy metals found in industrial wastewater, and various methods were developed to remove the Pb(II). The adsorption method was more efficient, cheap, and eco-friendly to remove the Pb(II) from aqueous solutions. The removal efficiency depends on the process parameters (initial concentration, the adsorbent dosage of T-Fe3O4 nanocomposites, residence time, and adsorbent pH). The relationship between the process parameters and output is non-linear and complex. The purpose of the present study is to develop an artificial neural networks (ANN) model to estimate and analyze the relationship between Pb(II) removal and adsorption process parameters. The model was trained with the backpropagation algorithm. The model was validated with the unseen datasets. The correlation coefficient adj.R² values for total datasets is 0.991. The relationship between the parameters and Pb(II) removal was analyzed by sensitivity analysis and creating a virtual adsorption process. The study determined that the ANN modeling was a reliable tool for predicting and optimizing adsorption process parameters for maximum lead removal from aqueous solutions.

Recycling of biogenic hydroxyapatite (HAP) for cleaning of lead from wastewater: performance and mechanism

In China, the utilization and recycling of chicken waste have become a significant environmental issue. In this study, we investigate the efficacy of biogenic hydroxyapatite (HAP) materials, recycled from chicken waste, for Pb(II) sequestration from wastewater. The results from batch experiments indicate that biogenic HAP could effectively remove Pb(II) from an aqueous solution. The maximum removal efficiency of Pb (more than > 99%) was observed under the following operational conditions: initial pH of 3.0, initial Pb(II) concentrations of 208 mg/L, and 1 g/L of HAP adsorbents. The presence of coexisting divalent ions, including Ca2+, Mg2+, and Mn2+, had no significant influence on Pb(II) removal. Spectroscopic analysis suggests that the dissolution-precipitation mechanism was mainly responsible for Pb(II) sequestration under acidic conditions (pH ≤ 3.0). Our findings indicate that biogenic HAP recycled from biowaste can be used as an efficient adsorbent for cleaning Pb(II) from wastewater.

Integrated Approach for Wastewater Treatment and Biofuel Production in Microalgae Biorefineries

The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and their main characteristics and limitations are discussed. Then, the technologies available for converting the biomass produced during wastewater treatment into biofuel are critically analyzed. Finally, current challenges and research directions for biofuel production and wastewater treatment through this approach are outlined.

Combination therapy of biogenic C-dots and lysozyme for enhanced antibacterial and antibiofilm activity

Nearly 80% of human chronic infections are caused due to bacterial biofilm formation. The increased resistance against the conventional antimicrobial agents makes it difficult to treat the biofilm-related infections. The antibiotics resistance developed by planktonic cells has also become a major threat for human. Therefore, we have attempted here to develop an effective alternative strategy to overcome the issues of antibiotics resistance of bacteria. Upon synthesis, biogenic C-dots were combined with lysozymes which were further encapsulated into chitosan nanocarrier to form C-dots carrier (CDC). The as-synthesized C-dots were found irregular shaped and the average size of C-dots and CDC were 8 ± 2 nm and 450 ± 50 nm, respectively. To ensure secure and targeted delivery of C-dots and lysozyme we have employed chitosan, a biodegradable and natural biopolymer, as a delivery system. The study of time-dependent bacterial growth and flow cytometry analysis demonstrated that CDC can exhibit a synergistic bactericidal activity against the antibiotics resistant recombinant E. coli cells. Further, we have shown that the CDC could be a potent agent for both prevention of biofilm formation and eradication of preformed biofilm. In addition, we have observed that our drug delivery system is hemocompatible in nature making it suitable for in vivo applications. Therefore, we believe that the combination therapy of C-dots and lysozyme may be used as an excellent antibacterial and antibiofilm strategy.

Green-synthesized nanocatalysts and nanomaterials for water treatment: Current challenges and future perspectives

Numerous hazardous environmental pollutants in water bodies, both organic and inorganic, have become a critical global issue. As greener and bio-synthesized versions of nanoparticles exhibit significant promise for wastewater treatment, this review discusses trends and future prospects exploiting the sustainable applications of green-synthesized nanocatalysts and nanomaterials for the removal of contaminants and metal ions from aqueous solutions. Recent trends and challenges about these nanocatalysts and nanomaterials and their potential applications in wastewater treatment and water purification are highlighted including toxicity and biosafety issues. This review delineates the pros and cons and critical issues pertaining to the deployment of these nanomaterials endowed with their superior surface area, mechanical properties, significant chemical reactivity, and cost-effectiveness with low energy consumption, for removal of hazardous materials and contaminants from water; comprehensive coverage of these materials for industrial wastewater remediation, and their recovery is underscored by recent advancements in nanofabrication, encompassing intelligent and smart nanomaterials.

Enhanced photocatalytic degradation of Rhodamine B, antibacterial and antioxidant activities of green synthesised ZnO/N doped carbon quantum dot nanocomposites

In order to explore an alternative photocatalyst for environmental remediation, we report a two-step process for the synthesis of zinc oxide/nitrogen doped carbon quantum dot nanocomposites (ZnO@NCQD NCs).

Insights into palladium nanoparticles produced by Shewanella oneidensis MR-1: Roles of NADH dehydrogenases and hydrogenases

Biologically synthesized palladium nanoparticles (bio-Pd) have attracted considerable interest as promising green catalysts for environmental remediation. However, the mechanisms by which microorganisms produce bio-Pd remain unclear. In the present study, we investigated the roles of Shewanella oneidensis MR-1 and its NADH dehydrogenases and hydrogenases (HydA and HyaB) in bio-Pd production using formate as the electron donor. The roles of NADH dehydrogenases and hydrogenases were studied by inhibiting NADH dehydrogenases and using hydrogenase mutants (ΔhydA, ΔhyaB, and ΔhydAΔhyaB), respectively. The results showed ~97% reduction of palladium by S. oneidensis MR-1 after 24 h using 250 μM palladium and 500 μM formate. Electron microscopy images showed the presence of bio-Pd on both the outer and cytoplasmic membranes of S. oneidensis MR-1. However, the inhibition of NADH dehydrogenases in S. oneidensis MR-1 resulted in only ~61% reduction of palladium after 24 h, and bio-Pd were not found on the outer membrane. The mutants lacking one or two hydrogenases removed 91-96% of palladium ions after 24 h and showed more cytoplasmic bio-Pd but less periplasmic bio-Pd. To the best of our knowledge, this is the first study to demonstrate the role of NADH dehydrogenases of S. oneidensis MR-1 in the formation of bio-Pd on the outer membrane. It also demonstrates that the hydrogenases (especially HyaB) of S. oneidensis MR-1 contribute to the formation of bio-Pd in the periplasmic space. This study provides mechanistic insights into the production of biogenic metal nanoparticles towards their possible use in industrial and environmental applications.

Current Trends in the Application of Nanomaterials for the Removal of Emerging Micropollutants and Pathogens from Water

Water resources contamination has a worldwide impact and is a cause of global concern. The need for provision of clean water is becoming more and more demanding. Nanotechnology may support effective strategies for the treatment, use and reuse of water and the development of next-generation water supply systems. The excellent properties and effectiveness of nanomaterials make them particularly suitable for water/wastewater treatment. This review provides a comprehensive overview of the main categories of nanomaterials used in catalytic processes (carbon nanotubes/graphitic carbon nitride (CNT/g-C₃N₄) composites/graphene-based composites, metal oxides and composites, metal–organic framework and commercially available nanomaterials). These materials have found application in the removal of different categories of pollutants, including pharmaceutically active compounds, personal care products, organic micropollutants, as well as for the disinfection of bacterial, viral and protozoa microbial targets, in water and wastewater matrices. Apart from reviewing the characteristics and efficacy of the aforementioned nanoengineered materials for the removal of different pollutants, we have also recorded performance limitations issues (e.g., toxicity, operating conditions and reuse) for their practical application in water and wastewater treatment on large scale. Research efforts and continuous production are expected to support the development of eco-friendly, economic and efficient nanomaterials for real life applications in the near future.

Cultivating microalgae in wastewater for biomass production, pollutant removal, and atmospheric carbon mitigation; a review

Water shortage is one of the leading global problems along with the depletion of energy resources and environmental deterioration. Recent industrialization, global mobility, and increasing population have adversely affected the freshwater resources. The wastewater sources are categorized as domestic, agricultural and industrial effluents and their disposal into water bodies poses a harmful impact on human and animal health due to the presence of higher amounts of nitrogen, phosphorus, sulfur, heavy metals and other organic/inorganic pollutants. Several conventional treatment methods have been employed, but none of those can be termed as a universal method due to their high cost, less efficiency, and non-environment friendly nature. Alternatively, wastewater treatment using microalgae (phycoremediation) offers several advantages over chemical-based treatment methods. Microalgae cultivation using wastewater offers the highest atmospheric carbon fixation rate (1.83 kg CO₂/kg of biomass) and fastest biomass productivity (40-50% higher than terrestrial crops) among all terrestrial bio-remediators with concomitant pollutant removal (80-100%). Moreover, the algal biomass may contain high-value metabolites including omega-3-fatty acids, pigments, amino acids, and high sugar content. Hence, after extraction of high-value compounds, residual biomass can be either directly converted to energy through thermochemical transformation or can be used to produce biofuels through biological fermentation or transesterification. This review highlights the recent advances in microalgal biotechnology to establish a biorefinery approach to treat wastewater. The articulation of wastewater treatment facilities with microalgal biorefinery, the use of microalgal consortia, the possible merits, and demerits of phycoremediation are also discussed. The impact of wastewater-derived nutrient stress and its exploitation to modify the algal metabolite content in view of future concerns of cost-benefit ratios of algal biorefineries is also highlighted.

Utilizing waste corn-cob in biosynthesis of noble metallic nanoparticles for antibacterial effect and catalytic degradation of contaminants

In the present study, cost-effective, and environmentally friendly fabrication of silver and gold nanoparticles was performed by using aqueous extract of waste corn-cob. The formation of the metallic nanoparticles (MNPs) was optimized by UV-Vis method. The phytoconstituents were responsible for reduction of silver and gold ions to silver nanoparticles (CC-AgNPs) and gold nanoparticles (CC-AuNPs) which were demonstrated by Fourier-transform infrared (FTIR) spectroscopy while formation of AgCl was attributed to the presence of chloride ions in the aqueous extract. The crystalline nature of the AgNPs, AgCl, and AuNPs was confirmed using the X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns. Morphological studies showed that the synthesized CC-AgNPs existed in spherical shape with the size ranging from 2 to 28 nm possessing an average value of 11 nm while CC-AuNPs were present in the multiple shapes with size ranging from 5 to 50 nm possessing an average value of 35 nm. For studies on bioactive application, the CC-AgNPs exhibited a high antibacterial activity against three bacterial strains including Salmonella typhimurium, Bacillus cereus, and Staphylococcus aureus. In addition, the catalytic efficiency of MNPs was investigated for reduction of o-, m-, p-nitrophenols, and degradation of organic dyes including Eosin Y and Rhodamine 6G. The rate constants calculated from the kinetical data revealed that the biosynthesized nanoparticles are excellent catalysts in potential applications for treatment of wastewater. Graphical abstract .

Green synthesis of metallic nanoparticles as effective alternatives to treat antibiotics resistant bacterial infections: A review

•

Recent approaches for green synthesis of metallic nanoparticles were discussed.

•

The antibacterial activities of various metallic nanoparticles were mentioned.

•

The different modes and mechanisms of antibacterial property were deciphered.

Due to development of bacterial resistance to the conventional antibiotics, the treatment of bacterial infections has become a major issue of concern. The unprescribed and uncontrolled use of antibiotics has lead to the rapid development of antibiotic resistance in bacterial strains. Therefore, the development of novel and potent bactericidal agents is of great clinical importance. Interestingly, metallic nanoparticles (NPs) have been proven to be promising alternative to antibiotics. NPs interact with the important cellular organelles and biomolecules like DNA, enzymes, ribosomes, and lysosomes that can affect cell membrane permeability, oxidative stress, gene expression, protein activation, and enzyme activation. Since, NPs target multiple biomolecules concurrently; it becomes very difficult for bacteria to develop resistance against them. Currently, there are different physical and chemical methods utilized for NPs synthesis. However, most of these processes are costly and potentially hazardous for the living organisms and environment. Therefore, there is a need to develop an eco-friendly and cost-effective method of synthesis. Recently, the ‘green synthesis’ approaches are gaining a lot of attention. It is demonstrated that living organisms like bacteria, yeast, fungi, and plant cells can reduce inorganic metal ions into metal NPs by their cellular metabolites. Both the yield and stability of biogenic NPs are quite satisfactory. In the current article, we have addressed the green synthesis of various metal NPs reported till date and highlighted their different modes and mechanisms of antibacterial properties. It is highly anticipated that biogenic metallic NPs could be viable and economical alternatives for treating drug resistant bacterial infections in near future.

Green synthesis of silver nanoparticles at low temperature in a fast pace with unique DPPH radical scavenging and selective cytotoxicity against MCF-7 and BT-20 tumor cell lines

•

Black peel pomegranate is a rare cultivar of pomegranate distinguished by a deep red color.

•

The peel extract of the pomegranate shows unique pharmaceutical properties such as antioxidant and antibacterial.

•

This extract synthesis silver nanoparticles in an ultra-fast pace without any heating or additional accelerators.

"Black Peel Pomegranate" is a rare pomegranate cultivar that its specific features are still uncovered particularly in the bio-nano researches. The present study was organized to evaluate this pomegranate's potential in the biosynthesis of silver nanoparticles as well as bio-medical activities. According to the results, the pomegranate peel extract incredibly inhibited 100 % of DPPH free radicals (EC₅₀ = 5 μg/mL). This extract also induced more than 70 % cell death in the treated breast tumor cell lines, BT-20 and MCF-7. Interestingly, the extract was capable of biosynthesis very stable and small (15.6 nm) silver nanoparticles at ambient temperature in an ultra-fast pace. Likewise, these nanoparticles inhibited 77 % of DPPH free radicals (EC₅₀ = 9 μg/mL). Although this antioxidant capacity was lower than that of the extract, instead, the anticancer activity of the synthesized nanoparticles was significantly enhanced, so that they led to more than 81 % and 89 % cell death in the breast tumor cell lines BT-20 and MCF-7, respectively. Considerably, neither the extract nor the biosynthesized silver nanoparticles, showed significant toxicity against non-tumor cell lines (L-929) at the same concentrations. These features of the biosynthesized nanoparticles were quite outstanding in comparison with chemical/commercial ones. Overall, the present study introduces black peel pomegranate as a worthy bio-agent in the biosynthesis of silver nanoparticles with unique activities as well as a cancer treatment.

Influence of feedstocks and modification methods on biochar's capacity to activate hydrogen peroxide for tetracycline removal

Three types of raw biochar (i.e. CBC, OBC, PBC produced from cornstalk, orange peel and peanut hull, respectively) and the modified ones (i.e., KMnO₄-, KOH- and H₃PO₄-treatment) were employed to activate H₂O₂ for the removal of tetracycline (TC). The effects of pyrolysis temperatures, H₂O₂ concentration and initial pH were examined. TC removal by raw biochars w/o H₂O₂ was dependent on the feedstock and pyrolysis temperature of biochar, but the removal efficiency was still quite low under optimum conditions. The KMnO₄-treatment significantly enhanced the adsorption of TC on all three biochars, but only enhanced the TC removal by CBC + H₂O₂. The KOH-treatment had insignificant effect on the adsorption of TC on biochar, but improved the performance of CBC/PBC + H₂O₂. The H₃PO₄-treatment had a negative impact on TC removal by biochar w/o H₂O₂. Overall, H₂O₂ could either enhance or decrease the TC removal by biochar, depending on biochar type, H₂O₂ concentration and solution pH.