A field-pilot for passive bioremediation of As-rich acid mine drainage

Arsenic and adipose tissue: an unexplored pathway for toxicity and metabolic dysfunction

Arsenic-contaminated drinking water can induce various disorders by disrupting lipid and glucose metabolism in adipose tissue, leading to insulin resistance. It inhibits adipocyte development and exacerbates insulin resistance, though the precise impact on lipid synthesis and lipolysis remains unclear. This review aims to explore the processes and pathways involved in adipogenesis and lipolysis within adipose tissue concerning arsenic-induced diabetes. Although arsenic exposure is linked to type 2 diabetes, the specific role of adipose tissue in its pathogenesis remains uncertain. The review delves into arsenic's effects on adipose tissue and related signaling pathways, such as SIRT3-FOXO3a, Ras-MAP-AP-1, PI(3)-K-Akt, endoplasmic reticulum stress proteins, CHOP10, and GPCR pathways, emphasizing the role of adipokines. This analysis relies on existing literature, striving to offer a comprehensive understanding of different adipokine categories contributing to arsenic-induced diabetes. The findings reveal that arsenic detrimentally impacts white adipose tissue (WAT) by reducing adipogenesis and promoting lipolysis. Epidemiological studies have hinted at a potential link between arsenic exposure and obesity development, with limited research suggesting a connection to lipodystrophy. Further investigations are needed to elucidate the mechanistic association between arsenic exposure and impaired adipose tissue function, ultimately leading to insulin resistance.

Towards an understanding of the factors controlling bacterial diversity and activity in semi-passive Fe- and As-oxidizing bioreactors treating arsenic-rich acid mine drainage

Semi-passive bioreactors based on iron and arsenic oxidation and coprecipitation are promising for the treatment of As-rich acid mine drainages. However, their performance in the field remains variable and unpredictable. Two bioreactors filled with distinct biomass carriers (plastic or a mix of wood and pozzolana) were monitored during 1 year. We characterized the dynamic of the bacterial communities in these bioreactors, and explored the influence of environmental and operational drivers on their diversity and activity. Bacterial diversity was analyzed by 16S rRNA gene metabarcoding. The aioA genes and transcripts were quantified by qPCR and RT-qPCR. Bacterial communities were dominated by several iron-oxidizing genera. Shifts in the communities were attributed to operational and physiochemical parameters including the nature of the biomass carrier, the water pH, temperature, arsenic, and iron concentrations. The bioreactor filled with wood and pozzolana showed a better resilience to disturbances, related to a higher bacterial alpha diversity. We evidenced for the first time aioA expression in a treatment system, associated with the presence of active Thiomonas spp. This confirmed the contribution of biological arsenite oxidation to arsenic removal. The resilience and the functional redundancy of the communities developed in the bioreactors conferred robustness and stability to the treatment systems.

Start-Up and Performance of a Full Scale Passive System In-Cluding Biofilters for the Treatment of Fe, as and Mn in a Neutral Mine Drainage

Passive mine drainage treatment plants are the scene of many chemical and biological reactions. Here, the establishment of iron (Fe), arsenic (As), and manganese (Mn) removal was monitored immediately after the commissioning of the Lopérec (Brittany, France) passive water treatment plant, composed of aeration cascades and settling ponds followed by pozzolana biofilters. Iron and As were almost completely removed immediately after commissioning, while Mn removal took more than 28 days to reach its maximum performance. Investigations were performed during two periods presenting strong variations in feeding flow-rates: from 2.8 m3.h−1 to 8.6 m3.h−1 and from 13.2 m3.h−1 to 31.3 m3.h−1. Design flow rate was reached during the first week of the second period. Dissolved Fe and As were not affected by the decrease in residence time while Mn was only slightly affected. Microbial communities in biofilter presented similarities with those of the pond sludge, and genera including Mn-oxidizing species were detected. Proportion of bacteria carrying the aioA gene encoding for As(III)-oxidase enzyme increased in communities during the second period. Results suggest Mn removal is mainly associated with bio-oxidation whereas removal of Fe and As could be mainly attributed to chemical oxidation and precipitation of Fe, possibly helped by As(III) bio-oxidation.

The Microbiology of Metal Mine Waste: Bioremediation Applications and Implications for Planetary Health

Mine wastes pollute the environment with metals and metalloids in toxic concentrations, causing problems for humans and wildlife. Microorganisms colonize and inhabit mine wastes, and can influence the environmental mobility of metals through metabolic activity, biogeochemical cycling and detoxification mechanisms. In this article we review the microbiology of the metals and metalloids most commonly associated with mine wastes: arsenic, cadmium, chromium, copper, lead, mercury, nickel and zinc. We discuss the molecular mechanisms by which bacteria, archaea, and fungi interact with contaminant metals and the consequences for metal fate in the environment, focusing on long-term field studies of metal-impacted mine wastes where possible. Metal contamination can decrease the efficiency of soil functioning and essential element cycling due to the need for microbes to expend energy to maintain and repair cells. However, microbial communities are able to tolerate and adapt to metal contamination, particularly when the contaminant metals are essential elements that are subject to homeostasis or have a close biochemical analog. Stimulating the development of microbially reducing conditions, for example in constructed wetlands, is beneficial for remediating many metals associated with mine wastes. It has been shown to be effective at low pH, circumneutral and high pH conditions in the laboratory and at pilot field-scale. Further demonstration of this technology at full field-scale is required, as is more research to optimize bioremediation and to investigate combined remediation strategies. Microbial activity has the potential to mitigate the impacts of metal mine wastes, and therefore lessen the impact of this pollution on planetary health.

A novel biofilm bioreactor derived from a consortium of acidophilic arsenite-oxidizing bacteria for the cleaning up of arsenite from acid mine drainage

Arsenite (As(III)) was considered to be of great concern in acid mine drainage (AMD). A promising approach for cleaning up of arsenite from AMD is microbial oxidation of As(III) followed by adsorptions. However, there is virtually no research about the acidophilic bioreactor for As(III) oxidation so far. In this study, we formed a new biofilm bioreactor with a consortium of acidophilic As(III) oxidation bacteria. It is totally chemoautotrophic, with no need to add any carbon or other materials during the operations. It works well under pH 3.0-4.0, capable of oxidizing 1.0-20.0 mg/L As(III) in 3.0-4.5 h, respectively. A continuous operation of the bioreactor suggests that it is very stable and sustainable. Functional gene detection indicated that the biofilms possessed a unique diversity of As(III) oxidase genes. Taken together, this acidophilic bioreactor has great potential for industrial applications in the cleaning up of As(III) from AMD solution.

Over-sulfated soils and sediments treatment: A brief discussion on performance disparities of biological and non-biological methods throughout the literature

High sulfate concentrations in industrial effluents as well as solid materials (excavated soils, dredged sediments, etc.) are a major hindrance for circular economy outlooks. SO₄^2- acceptability standards are indeed increasingly restrictive, given the potential outcomes for public health and ecosystems. This literature review deals with the treatment pathways relying on precipitation, adsorption and microbial redox principles. Although satisfactory removal performances can be achieved with each of them, significant yield differences are displayed throughout the bibliography. The challenge here was to identify the parameters leading to this variability and to assess their impact. The precipitation pathway is based on the formation of two main minerals (ettringite and barite). It can lead to total sulfate removal but can also be limited by aqueous wastes chemistry. Stabilizer kinetics of formation and equilibrium are highly constrained by background properties such as pH, Eh, SO₄^2- saturation state and inhibiting metal occurrences. Regarding the adsorption route, sorbents' intrinsic features such as the q_max parameter govern removal yields. Concerning the microbial pathway, the chemical oxygen demand/SO₄^2- ratio and the hydraulic retention time, which are classically evoked as yield variation factors, appear here to be weakly influential. The effect of these parameters seems to be overridden by the influence of electron donors, which constitute a first order factor of variability. A second order variability can be read according to the nature of these electron donors. Approaches using simple monomers (ethanol lactates, etc.) perform better than those using predominantly ligneous organic matter.

Modeling of microbial kinetics and mass transfer in bioreactors simulating the natural attenuation of arsenic and iron in acid mine drainage

Natural attenuation in acid mine drainage (AMD) due to biological iron and arsenic oxidation offers a promising strategy to treat As-rich AMD in passive bioreactors. A reactive transport model is developed in order to identify the main controlling factors. It simulates batch and flow-through experiments that reproduce natural attenuation in a high-As AMD. The 2-D model couples second-order microbial kinetics (Fe- and As- oxidation) and geochemical reactions to hydrodynamic transport. Oxidation only occurrs in the biofilm with an oxygen transfer from the air through the water column. The model correctly simulates the Fe(II)-Fe(III) and As(III)-As(V) concentrations in the outlet waters and the precipitates, over hydraulic retention times from 30 min to 800 min. It confirms that the natural attenuation at 20 °C is driven by the fast Fe(II) oxidation and slow As(III) oxidation that favors arsenite trapping by schwertmannite over amorphous ferric arsenate (AFA) formation. The localization of iron oxidation in the biofilm limits the attenuation of arsenic and iron as the water column height increases. The change in the composition of the bacterial iron-oxidizer community of the biofilm at the lowest pH boundary seems to control the Fe(II) oxidation kinetic rate besides the bacterial concentration.

A combined abiotic oxidation-precipitation process for rapid As removal from high-As(III)-Mn(II) acid mine drainage and low As-leaching solid products

A combination process of Fenton-like and catalytic Mn(II) oxidation via molecular oxygen-induced abio-oxidation of As(III)-Mn(II)-rich acid mine drainage (AMD) is developed to rapidly and efficiently remove As and obtain low As-leaching solids in this study. The effect of pH, temperature, oxygen flow rate and neutralization reagent on As removal was investigated. The results showed that pH was important to As removal efficiency, which achieved maximum in 0.25-2 h, but decreased from ∼100 % to ∼92.6 % with the increase of pH 5-9. pH, temperature and oxygen flow rate played key roles in As(III) oxidation. The increase of As(III) oxidized from 16.8 to 67.1% to 98.6-99.0 % occurred as increasing the pH 5-9, 25-95 °C and oxygen flow rate of 0-2.4 L min^-1. NaOH or Ca(OH)₂ as base was less important to As removal. The mechanism involved Fenton-like reaction between Fe(II) and O₂ for produced Fe(III) (oxy)hydroxide association with As(III + V) and Mn(II), catalytic Mn(II) oxidation for the formation of Mn(III, IV) oxides, and further As(III) oxidation by Mn(III, IV) oxides. As-bearing six-line ferrihydrite was the main solid product for low As-leaching fixation. pH 8, 95 °C and oxygen flow rate of 1.6 L min^-1 were optimal for As removal.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Mine drainage: Remediation technology and resource recovery

Drainage from current and historic mining operations remains a persistent environmental problem. Numerous research and development efforts were made in 2019 with a goal to minimize the impact of mine drainage on the environment, while other research endeavors addressed the mine drainage issue from a different perspective, where mine drainage was considered a resource for water and valuable products, such as metals, sulfuric acid, and rare earth elements. Thus, this review has two main sections: (a) focusing on research efforts in mine drainage remediation technology, and (b) emphasizing advances in resource recovery from mine drainage. The first section covers traditional and emerging passive and active treatment technologies. The second section summarizes resource recovery efforts using various technologies, such as selective precipitation, membrane process, and biological systems. PRACTITIONER POINTS: Significant progress continued to be made in the management of mine drainage and related issues. Recent remediation technology advances in mine drainage were presented. Technologies focusing on resource recovery from mine drainage were reviewed.

Treatment of As-rich mine effluents and produced residues stability: Current knowledge and research priorities for gold mining

Refractory ores, in which gold is often embedded within As-bearing and acid-generating sulfide minerals, are becoming the main gold source worldwide. These ores require an oxidizing pre-treatment, prior to cyanidation, to efficiently breakdown the sulfides and enhance gold liberation. As a result, large volumes of As-rich effluents (> 500 mg/L) are produced through the pre-oxidation of refractory gold ores and/or the exposure of As-bearing tailings upon exposure to air and water. Limited information is available on performant treatment of these effluents, especially of pre-oxidation effluents characterized by a complex chemistry, extremely acidic or alkaline pH and high concentrations of arsenic. The treatment of As-rich effluents is mainly based on precipitation (using Al or Fe salts and/or Ca-based compounds) and (electro)-chemical or biological oxidation processes. A performant treatment process must maximize As removal from contaminated mine water and allow for the production of residues that are geochemically stable over the long term. An extensive literature review showed that Fe(III)-As(V) precipitates, especially bioscorodite and (nano)scorodite, appear to be the most appropriate forms to immobilize As due to their low solubility and high stability, especially when encapsulated within an inert material such as hydroxyl gels. Research is still required to assess the long-term stability of these As-bearing residues under mine-site conditions for the sustainable exploitation of refractory gold deposits.

A novel carbon monoxide fed moving bed biofilm reactor for sulfate rich wastewater treatment

In this study, a moving bed biofilm reactor was used for biodesulfuruization using CO as the sole carbon substrate. The effect of hydraulic retention time (HRT), sulfate loading rate and CO loading rate on sulfate and CO removal was examined. At 72, 48 and 24 h HRT, the sulfate removal was 93.5%, 91.9% and 80.1%, respectively. An increase in the sulfate loading reduced the sulfate reduction efficiency, which, however, was improved by increasing the CO flow rate into the MBBR. Best results in terms of sulfate reduction (>80%) were obtained for low inlet sulfate and high CO loading conditions. The CO utilization was very high at 85% throughout the study, except during the last phase of the continuous bioreactor operation it was around 70%. An artificial neural network based model was successfully developed and optimized to accurately predict the bioreactor performance in terms of both sulfate reduction and CO utilization. Overall, this study showed an excellent potential of the moving bed biofilm bioreactor for efficient sulfate reduction even under high loading conditions.

Dynamics of Bacterial Communities Mediating the Treatment of an As-Rich Acid Mine Drainage in a Field Pilot

Passive treatment based on iron biological oxidation is a promising strategy for Arsenic (As)-rich acid mine drainage (AMD) remediation. In the present study, we characterized by 16S rRNA metabarcoding the bacterial diversity in a field-pilot bioreactor treating extremely As-rich AMD in situ, over a 6 months monitoring period. Inside the bioreactor, the bacterial communities responsible for iron and arsenic removal formed a biofilm (“biogenic precipitate”) whose composition varied in time and space. These communities evolved from a structure at first similar to the one of the feed water used as an inoculum to a structure quite similar to the natural biofilm developing in situ in the AMD. Over the monitoring period, iron-oxidizing bacteria always largely dominated the biogenic precipitate, with distinct populations (Gallionella, Ferrovum, Leptospirillum, Acidithiobacillus, Ferritrophicum), whose relative proportions extensively varied among time and space. A spatial structuring was observed inside the trays (arranged in series) composing the bioreactor. This spatial dynamic could be linked to the variation of the physico-chemistry of the AMD water between the raw water entering and the treated water exiting the pilot. According to redundancy analysis (RDA), the following parameters exerted a control on the bacterial communities potentially involved in the water treatment process: dissolved oxygen, temperature, pH, dissolved sulfates, arsenic and Fe(II) concentrations and redox potential. Appreciable arsenite oxidation occurring in the bioreactor could be linked to the stable presence of two distinct monophylogenetic groups of Thiomonas related bacteria. The ubiquity and the physiological diversity of the bacteria identified, as well as the presence of bacteria of biotechnological relevance, suggested that this treatment system could be applied to the treatment of other AMD.