1
|
Tailoring photocatalytic water splitting activity of boron-thiophene polymer through pore size engineering. J Chem Phys 2024; 160:094712. [PMID: 38445742 DOI: 10.1063/5.0197992] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2024] [Accepted: 02/18/2024] [Indexed: 03/07/2024] Open
Abstract
Taking into account the electron-rich and visible light response of thiophene, first-principles calculations have been carried out to explore the photocatalytic activity of donor-acceptor polymers incorporating thiophene and boron. Honeycomb-kagome boron-thiophene (BTP) polymers with varying numbers of thiophene units and fixed B center atoms are direct bandgap semiconductors with tunable bandgaps ranging from 2.41 to 1.88 eV and show high absorption coefficients under the ultraviolet and visible regions of the solar spectrum. Fine-tuning the band edges of the BTP polymer is efficiently achieved by adjusting the pore size through the manipulation of thiophene units between the B centers. This manipulation, achieved without excessive chemical functionalization, facilitates the generation of an appropriate quantity of photoexcited electrons and/or holes to straddle the redox potential of the water. Our study demonstrates that two units between B centers of thiophene in BTP polymers enable overall photocatalytic water splitting, whereas BTP polymers with larger pores solely promote photocatalytic hydrogen reduction. Moreover, the thermodynamics of hydrogen and oxygen reduction reactions either proceed spontaneously or need small additional external biases. Our findings provide the rationale for designing metal-free and single-material polymer photocatalysts based on thiophene, specifically for achieving efficient overall water splitting.
Collapse
|
2
|
Degradation Efficiency of Organic Dyes on CQDs As Photocatalysts: A Review. ACS OMEGA 2024; 9:10017-10029. [PMID: 38463277 PMCID: PMC10918811 DOI: 10.1021/acsomega.3c09547] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/30/2023] [Revised: 02/12/2024] [Accepted: 02/13/2024] [Indexed: 03/12/2024]
Abstract
Across the globe, the task of providing clean and safe drinking water is getting harder. Organic contaminants, including dyes and pharmaceutical medications, are a significant environmental threat, especially in aquatic bodies due to their uncontrolled emission. Therefore, a method for their degradation in water bodies that is both environmentally friendly and commercially feasible must be developed. In the realm of photocatalysis, carbon-based nanomaterials have drawn more attention in the last ten years. Due to their exceptional and distinct qualities, metal-free carbon-based photocatalytic systems have received a lot of attention recently for their ability to degrade organic contaminants into semiconductor quantum dots, which are already available. A class of nanomaterials with a particle size between 2 and 10 nm showing distinct optoelectrical characteristics is among the variety of catalytic quantum dots. This review covers several synthesis techniques such as electrochemical, laser ablation, microwave radiation, hydrothermal, and optical features of CQDs such as the photoluminescent (PL) property and quantum confinement effect. The uses of CQDs in the degradation of various dyes as well as the difficulties that still exist and the opportunities that lie ahead have also been explored.
Collapse
|
3
|
Fabrication of biogenic carbon-based materials from coconut husk for the eradication of dye. CHEMOSPHERE 2023; 340:139823. [PMID: 37586494 DOI: 10.1016/j.chemosphere.2023.139823] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Revised: 07/31/2023] [Accepted: 08/12/2023] [Indexed: 08/18/2023]
Abstract
The highly biocompatible nature of carbon dots (CQDs) and potential usage in waste water treatment makes them as one of the effective alternative for treating water pollution. Herein, biogenic carbon dots (CQDs) with size range of 2 nm were prepared from waste coconut husk as a precursor source. The hydrophilic nature and higher surface area of as prepared CQDs has further supported the superior adsorption efficiency of more than 90% for Victoria blue B (VB) dye from waste water samples. Different dye adsorption parameters including adsorbate and adsorbent dosage, pH of reaction media and equilibrium time have been optimized and found that 8 mg of adsorbent was sufficient to remove 70 mg VB dye in 4 mL aqueous solution in 60 min at pH = 7. The adsorption kinetic (2nd order) and isotherms (Freundlich-type) were well followed on prepared CQDs. The reusability studies up to 5 times with minimal decrement of 4% confirm the constancy of CQDs for the adsorptive removal of VB. The methodology presents a greener way for overcoming ecological issues with sustainable materials in an economical manner.
Collapse
|
4
|
Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2303980. [PMID: 37461252 DOI: 10.1002/smll.202303980] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2023] [Revised: 07/05/2023] [Indexed: 11/16/2023]
Abstract
2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO2 reduction, NH3 production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications. Furthermore, the challenges and the future opportunities are also presented related to the future developments and advancements of 2D materials for the large-scale real-time photocatalytic applications.
Collapse
|
5
|
Preparation, characterisation and applications of bone char, a food waste-derived sustainable material: A review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 339:117896. [PMID: 37080100 DOI: 10.1016/j.jenvman.2023.117896] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 03/21/2023] [Accepted: 04/07/2023] [Indexed: 05/03/2023]
Abstract
The production of increasing quantities of by-products is a key challenge for modern society; their valorisation - turning them into valuable compounds with technological applications - is the way forward, in line with circular economy principles. In this review, the conversion of bones (by-products of the agro-food industry) into bone char is described. Bone char is obtained with a process of pyrolysis, which converts the organic carbon into an inorganic graphitic one. Differently from standard biochar of plant origin, however, bone char also contains calcium phosphates, the main component of bone (often hydroxyapatite). The combination of calcium phosphate and graphitic carbon makes bone char a unique material, with different possible uses. Here bone chars' applications in environmental remediation, sustainable agriculture, catalysis and electrochemistry are discussed; several aspects are considered, including the bones used to prepare bone char, the preparation conditions, how these affect the properties of the materials (i.e. porosity, surface area) and its functional properties. The advantages and limitations of bone chars in comparison to traditional biochar are discussed, highlighting the directions the research should take for bone chars' performances to improve. Moreover, an analysis on the sustainability of bone chars' preparation and use is also included.
Collapse
|
6
|
Ultrahigh-resolution quantum dot patterning for advanced optoelectronic devices. Chem Commun (Camb) 2023; 59:2697-2710. [PMID: 36751869 DOI: 10.1039/d2cc05874j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
Abstract
Quantum dots have attracted significant scientific interest owing to their optoelectronic properties, which are distinct from their bulk counterparts. In order to fully utilize quantum dots for next generation devices with advanced functionalities, it is important to fabricate quantum dot colloids into dry patterns with desired feature sizes and shapes with respect to target applications. In this review, recent progress in ultrahigh-resolution quantum dot patterning technologies will be discussed, with emphasis on the characteristic advantages as well as the limitations of diverse technologies. This will provide guidelines for selecting suitable tools to handle quantum dot colloids throughout the fabrication of quantum dot based solid-state devices. Additionally, epitaxially fabricated single-particle level quantum dot arrays are discussed. These are extreme in terms of pattern resolution, and expand the potential application of quantum dots to quantum information processing.
Collapse
|
7
|
Recent Advances in Microfluidics-Based Electrochemical Sensors for Foodborne Pathogen Detection. BIOSENSORS 2023; 13:246. [PMID: 36832012 PMCID: PMC9954504 DOI: 10.3390/bios13020246] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/17/2023] [Revised: 02/03/2023] [Accepted: 02/06/2023] [Indexed: 05/22/2023]
Abstract
Using pathogen-infected food that can be unhygienic can result in severe diseases and an increase in mortality rate among humans. This may arise as a serious emergency problem if not appropriately restricted at this point of time. Thus, food science researchers are concerned with precaution, prevention, perception, and immunity to pathogenic bacteria. Expensive, elongated assessment time and the need for skilled personnel are some of the shortcomings of the existing conventional methods. Developing and investigating a rapid, low-cost, handy, miniature, and effective detection technology for pathogens is indispensable. In recent times, there has been a significant scope of interest for microfluidics-based three-electrode potentiostat sensing platforms, which have been extensively used for sustainable food safety exploration because of their progressively high selectivity and sensitivity. Meticulously, scholars have made noteworthy revolutions in signal enrichment tactics, measurable devices, and portable tools, which can be used as an allusion to food safety investigation. Additionally, a device for this purpose must incorporate simplistic working conditions, automation, and miniaturization. In order to meet the critical needs of food safety for on-site detection of pathogens, point-of-care testing (POCT) has to be introduced and integrated with microfluidic technology and electrochemical biosensors. This review critically discusses the recent literature, classification, difficulties, applications, and future directions of microfluidics-based electrochemical sensors for screening and detecting foodborne pathogens.
Collapse
|
8
|
Abstract
The increasing interest and need to shift to sustainable energy give rise to the utilization of fuel cell technologies in various applications. The challenging task of hydrogen storage and transport led to the development of liquid hydrogen carriers (LHCs) as fuels for direct LHC fuel cells, such as methanol in direct methanol fuel cells (DMFCs). Although simpler to handle, most direct LHC fuel cells suffer from durability and price issues derived from high catalysts' loadings and byproducts of the oxidation reaction of the fuel. Herein, we report on the development of direct hydroquinone fuel cells (DQFCs) based on anthraquinone-2,7-disulfonic acid (AQDS) as an LHC. We have shown that DQFC can operate with a continuous flow of quinone as a hydrogen carrier, outperforming the incumbent state-of-the-art DMFC by a factor of 3 in peak power density while completely removing the need for any catalyst at the anode. In addition, we demonstrate that quinone can be charged with protons in the same system, making it a reversible fuel cell system. We optimized the operating conditions and discussed the governing conditions to reach the best performance.
Collapse
|
9
|
Novel rhombus Co 3O 4-nanocapsule CuO heterohybrids for efficient photocatalytic water splitting and electrochemical energy storage applications. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 325:116650. [PMID: 36419312 DOI: 10.1016/j.jenvman.2022.116650] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Revised: 10/22/2022] [Accepted: 10/27/2022] [Indexed: 06/16/2023]
Abstract
The most appealing and prominent approach for improving energy storage and conversion performance is the development of heterojunction interfaces with efficient and unique metal oxide nanostructures. Rhombus Co3O4, nanocapsule CuO, and their heterojunction composites were synthesized using a single-step hydrothermal process. The resulting heterojunction Co3O4-CuO nanocomposite outperformed the pristine Co3O4 and CuO nanostructures for the electrochemical supercapacitor and water splitting performances. The composite showed 2.4 and 1.3 times higher specific capacitance than the associated pristine CuO and Co3O4 nanostructures, while its capacitance was 395 F g-1 at a current density of 0.5 A g-1. In addition, long-term GCD results with more than 90% stability and significant capacity retention at higher scan rates revealed the unaffected structures interfaced during the electrochemical reactions. The composite photoelectrode demonstrated more than 20% of photocurrent response with light illumination than the dark condition in water splitting. Co3O4-CuO heterostructured composite electrode showed a 0.16 mA/cm2 photocurrent density, which is 3.2 and 1.7 times higher than the pristine CuO and Co3O4 electrodes, respectively. This performance was attributed to its unique structural composition, high reactive sites, strong ion diffusion, and fast electron accessibility. Electron microscopic and spectroscopic techniques confirmed the properties of the electrodes as well as their morphological properties. Overall, the heterojunction interface with novel rhombus and capsule structured architectures showed good electrochemical performance, suggesting their energy storage and conversion applications.
Collapse
|
10
|
Multifunctional polyoxotungstocobaltate anchored fern-leaf like BiVO4 microstructures for enhanced photocatalytic and supercapacitive performance. Colloids Surf A Physicochem Eng Asp 2023. [DOI: 10.1016/j.colsurfa.2023.130974] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
|
11
|
Rhus Semialata
Derived Carbon Quantum Dots Decorated Pt Deposited TiO
2
for Efficient Light‐Driven Hydrogen Production. ChemistrySelect 2022. [DOI: 10.1002/slct.202202705] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
|
12
|
Materials Research Directions Toward a Green Hydrogen Economy: A Review. ACS OMEGA 2022; 7:32908-32935. [PMID: 36157740 PMCID: PMC9494439 DOI: 10.1021/acsomega.2c03996] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Accepted: 08/29/2022] [Indexed: 05/06/2023]
Abstract
A constellation of technologies has been researched with an eye toward enabling a hydrogen economy. Within the research fields of hydrogen production, storage, and utilization in fuel cells, various classes of materials have been developed that target higher efficiencies and utility. This Review examines recent progress in these research fields from the years 2011-2021, exploring the most commonly occurring concepts and the materials directions important to each field. Particular attention has been given to catalyst materials that enable the green production of hydrogen from water, chemical and physical storage systems, and materials used in technical capacities within fuel cells. The quantification of publication and materials trends provides a picture of the current state of development within each node of the hydrogen economy.
Collapse
|
13
|
Synthesis, properties and catalysis of quantum dots in C–C and C-heteroatom bond formations. PHYSICAL SCIENCES REVIEWS 2022. [DOI: 10.1515/psr-2021-0093] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
Luminescent quantum dots (QDs) represent a new form of carbon nanomaterials which have gained widespread attention in recent years, especially in the area of chemical sensing, bioimaging, nanomedicine, solar cells, light-emitting diode (LED), and electrocatalysis. Their extremely small size renders some unusual properties such as quantum confinement effects, good surface binding properties, high surface‐to‐volume ratios, broad and intense absorption spectra in the visible region, optical and electronic properties different from those of bulk materials. Apart from, during the past few years, QDs offer new and versatile ways to serve as photocatalysts in organic synthesis. Quantum dots (QD) have band gaps that could be nicely controlled by a number of factors in a complicated way, mentioned in the article. Processing, structure, properties and applications are also reviewed for semiconducting quantum dots. Overall, this review aims to summarize the recent innovative applications of QD or its modified nanohybrid as efficient, robust, photoassisted redox catalysts in C–C and C-heteroatom bond forming reactions. The recent structural modifications of QD or its core structure in the development of new synthetic methodologies are also highlighted. Following a primer on the structure, properties, and bio-functionalization of QDs, herein selected examples of QD as a recoverable sustainable nanocatalyst in various green media are embodied for future reference.
Collapse
|
14
|
Bimetallic CoCu-ZIF material for efficient visible light photocatalytic fuel denitrification. RSC Adv 2022; 12:12702-12709. [PMID: 35480366 PMCID: PMC9041090 DOI: 10.1039/d2ra01049f] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2022] [Accepted: 04/19/2022] [Indexed: 11/21/2022] Open
Abstract
Effective design of photocatalysts is an effective method to improve the separation of photogenerated carriers, which improves the photocatalytic performance of photocatalysts. In this work, CoCu-ZIF materials with bimetallic structure were synthesized at room temperature for efficient photocatalytic fuel denitrification. The properties and structures of CoCu-ZIF photocatalysts can be effectively controlled by adjusting the molar ratio of cobalt to copper. The as-prepared CoCu-ZIF photocatalysts were characterized by XRD, FT-IR, SEM, TEM, UV-vis, Raman, BET and other techniques. The photoactivity of CoCu-ZIF for the denitrogenation of NCCs has been evaluated using visible light (λ ≥ 420 nm). The results indicate that Co8Cu2-ZIF photocatalysts exhibit excellent photocatalytic properties, in which the denitrification rate almost reached 80% after 4 hours under visible light irradiation, which is higher than the degradation ability of ZIF-67 (38%). Transient photoelectrochemical experiments and EIS Nyquist plots indicate that Co8Cu2-ZIF with unique structure efficiently improves the separation and transfer of photogenerated electron-hole pairs. Moreover, a possible reaction mechanism was proposed by LC-MS analysis.
Collapse
|
15
|
Two-Dimensional Titanium Dioxide-Surfactant Photoactive Supramolecular Networks: Synthesis, Properties, and Applications for the Conversion of Light Energy. Int J Mol Sci 2022; 23:ijms23074006. [PMID: 35409363 PMCID: PMC8999612 DOI: 10.3390/ijms23074006] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2022] [Revised: 03/21/2022] [Accepted: 03/29/2022] [Indexed: 01/25/2023] Open
Abstract
The desire to harness solar energy to address current global environmental problems led us to investigate two-dimensional (2D) core-shell hybrid photocatalysts in the form of a 2D-TiO2-surfactant, mainly composed of fatty acids. The bulk products, prepared by two slightly different methods, consist of stacked host-guest hybrid sheets held together by van der Waals forces between alkyl carboxylate moieties, favoring the synergistic conjugation of the photophysical properties of the core and the hydrophobicity of the self-assembled surfactant monolayer of the shell. X-ray diffraction and the vibrational characteristics of the products revealed the influence of synthesis strategies on two types of supramolecular aggregates that differ in the core chemical structure, guest conformers of alkyl surfactant tails and type, and the bilayer and monolayer of the structure of nanocomposites. The singular ability of the TiO2 core to anchor carboxylate leads to commensurate hybrids, in contrast to both layered clay and layered double-hydroxide-based ion exchangers which have been previously reported, making them potentially interesting for modeling the role of fatty acids and lipids in bio-systems. The optical properties and photocatalytic activity of the products, mainly in composites with smaller bandgap semiconductors, are qualitatively similar to those of nanostructured TiO2 but improve their photoresponse due to bandgap shifts and the extreme aspect-ratio characteristics of two-dimensional TiO2 confinement. These results could be seen as a proof-of-concept of the potential of these materials to create custom-designed 2D-TiO2-surfactant supramolecular photocatalysts.
Collapse
|
16
|
A Review on Carbon Quantum Dot Based Semiconductor Photocatalysts for the Abatement of Refractory Pollutants. Chemphyschem 2022; 23:e202100873. [PMID: 35320623 DOI: 10.1002/cphc.202100873] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2021] [Revised: 03/15/2022] [Indexed: 11/10/2022]
Abstract
Photocatalysis is a green approach frequently utilised to eliminate a variety of environmentally hazardous refractory pollutants. Accordingly, the modification of semiconductor photocatalysts with Carbon Quantum Dots (CQDs) is of great importance for the treatment of such pollutants due to their attractive physical and chemical properties. CQDs are a perfect candidate to handle photocatalysts of high-performance since they operate as co-catalysts and as visible light harvesters. The higher separation rate of electron-hole pairs in the photocatalytic system is attributable to better photodegradation efficiency. This review classifies CQD based photocatalysts as pure, doped and composite materials and discusses the specific advantages of CQDs in visible light-driven photocatalysis. In this work, the versatile roles of CQDs in CQD-based photocatalytic systems are thoroughly discussed and s u mmarised.
Collapse
|
17
|
Novel Z-scheme binary zinc tungsten oxide/nickel ferrite nanohybrids for photocatalytic reduction of chromium (Cr (VI)), photoelectrochemical water splitting and degradation of toxic organic pollutants. JOURNAL OF HAZARDOUS MATERIALS 2022; 423:127044. [PMID: 34523469 DOI: 10.1016/j.jhazmat.2021.127044] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/28/2021] [Revised: 08/23/2021] [Accepted: 08/24/2021] [Indexed: 06/13/2023]
Abstract
A simple hydrothermal approach was demonstrated for synthesizing a coupled NiFe2O4-ZnWO4 nanocomposite, wherein one-dimensional ZnWO4 nanorods were inserted into two-dimensional NiFe2O4 nanoplates. Herein, we evaluated the photocatalytic removal of Cr(VI), and degradation of tetracycline (TC) and methylene blue (MB) by the nanocomposite, as well as its ability to split water. The ZnWO4 nanorods enriched the synergistic interactions, upgraded the solar light fascination proficiency, and demonstrated outstanding detachment and migration of the photogenerated charges, as confirmed by a transient photocurrent study and electrochemical impedance spectroscopy measurements. Compared to pristine NiFe2O4 and ZnWO4, the NiFe2O4-ZnWO4 nanocomposite exhibited a higher Cr(VI) reduction (93.5%) and removal of TC (97.9%) and MB (99.6%). Radical trapping results suggested that hydroxyl and superoxide species are dominant reactive species, thereby facilitating the Z-scheme mechanism. Furthermore, a probable photocatalytic mechanism was projected based on the experimental results. The photoelectrochemical analysis confirmed that NiFe2O4-ZnWO4 exhibited minor charge-transfer resistance and large photocurrents. We propose a novel and efficient approach for designing a coupled heterostructured nanocomposites with a significant solar light ability for ecological conservation and water splitting.
Collapse
|
18
|
Biogenic Sulfur-Based Chalcogenide Nanocrystals: Methods of Fabrication, Mechanistic Aspects, and Bio-Applications. Molecules 2022; 27:458. [PMID: 35056773 PMCID: PMC8779671 DOI: 10.3390/molecules27020458] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2021] [Revised: 01/08/2022] [Accepted: 01/10/2022] [Indexed: 11/17/2022] Open
Abstract
Bio-nanotechnology has emerged as an efficient and competitive methodology for the production of added-value nanomaterials (NMs). This review article gathers knowledge gleaned from the literature regarding the biosynthesis of sulfur-based chalcogenide nanoparticles (S-NPs), such as CdS, ZnS and PbS NPs, using various biological resources, namely bacteria, fungi including yeast, algae, plant extracts, single biomolecules, and viruses. In addition, this work sheds light onto the hypothetical mechanistic aspects, and discusses the impact of varying the experimental parameters, such as the employed bio-entity, time, pH, and biomass concentration, on the obtained S-NPs and, consequently, on their properties. Furthermore, various bio-applications of these NMs are described. Finally, key elements regarding the whole process are summed up and some hints are provided to overcome encountered bottlenecks towards the improved and scalable production of biogenic S-NPs.
Collapse
|
19
|
Nanocomposite and bio-nanocomposite polymeric materials/membranes development in energy and medical sector: A review. Int J Biol Macromol 2021; 193:2121-2139. [PMID: 34780890 DOI: 10.1016/j.ijbiomac.2021.11.044] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2021] [Revised: 11/02/2021] [Accepted: 11/05/2021] [Indexed: 01/13/2023]
Abstract
Nanocomposite and bio-nanocomposite polymer materials/membranes have fascinated prominent attention in the energy as well as the medical sector. Their composites make them appropriate choices for various applications in the medical, energy and industrial sectors. Composite materials are subject of interest in the polymer industry. Different kinds of fillers, such as cellulose-based fillers, carbon black, clay nanomaterials, glass fibers, ceramic nanomaterial, carbon quantum dots, talc and many others have been incorporated into polymers to improve the quality of the final product. These results are dependent on a variety of factors; however, nanoparticle dispersion and distribution are major obstacles to fully using nanocomposites/bio-nanocomposites materials/membranes in various applications. This review examines the various nanocomposite and bio-nanocomposite materials applications in the energy and medical sector. The review also covers the variety of ways for increasing nanocomposite and bio-nanocomposite materials features, each with its own set of applications. Recent researches on composite materials have shown that polymeric nanocomposites and bio-nanocomposites are promising materials that have been intensively explored for many applications that include electronics, environmental remediation, energy, sensing (biosensor) and energy storage devices among other applications. In this review, we studied various nanocomposite and bio-nanocomposite materials, their controlling parameters to develop the product and examine their features and applications in the fields of energy and the medical sector.
Collapse
|
20
|
Recent advances in Co-based co-catalysts for efficient photocatalytic hydrogen generation. J Colloid Interface Sci 2021; 608:1553-1575. [PMID: 34742073 DOI: 10.1016/j.jcis.2021.10.051] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/02/2021] [Revised: 10/06/2021] [Accepted: 10/11/2021] [Indexed: 02/01/2023]
Abstract
Recent progress in photocatalytic hydrogen generation reaction highlights the critical role of co-catalysts in enhancing the solar-to-fuel conversion efficiency of diverse band-matched semiconductors. Because of the compositional flexibility, adjustable microstructure, tunable crystal phase and facet, cobalt-based co-catalysts have stimulated tremendous attention as they have high potential to promote hydrogen evolution reaction. However, a comprehensive review that specifically focuses on these promising materials has not been reported so far. Therefore, this present review emphasizes the recent progress in the pursuing of highly efficient Co-based co-catalysts for water splitting, and the advances in such materials are summarized through the analysis of structure-activity relationships. The fundamental principles of photocatalytic hydrogen production are profoundly outlined, followed by an elaborate discussion on the crucial parameters influencingthe reaction kinetics. Then, the co-catalytic reactivities of various Co-based materials involving Co, Co oxides, Co hydroxides, Co sulfides, Co phosphides and Co molecular complexes, etc, are thoroughly discussed when they are coupled with host semiconductors, with an insight towards the ultimateobjective of achieving a rationally designed photocatalyst for enhancing water splitting reaction dynamics. Finally, the current challenge and future perspective of Co-based co-catalysts as the promising noble-metal alternative materials for solar hydrogen generation are proposed and discussed.
Collapse
|
21
|
Investigation of electrochemical performance of an efficient Ti 2O 3-CeO 2 nanocomposite for enhanced pollution-free energy conversion applications. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 295:113138. [PMID: 34198173 DOI: 10.1016/j.jenvman.2021.113138] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2021] [Revised: 06/13/2021] [Accepted: 06/19/2021] [Indexed: 06/13/2023]
Abstract
The development of an economical, abundant, stable, and greatly active electrocatalyst for water oxidation is extremely important for future energy conversion system. Electrochemical water splitting is a new move toward H2 and O2 gas production. It can be used in sustainable and pollution-free energy conversion applications. In this work, Ti2O3-CeO2 nanocomposites were successfully synthesized with different molar ratios by facile hydrothermal method for electrochemical water oxidation. Mixed phase structure of Ti2O3-CeO2 nanocomposites was confirmed by X-ray diffraction spectra and well identified by highest peak of Ti2O3 in 2θ values of 33.0 and CeO2 in 2θ values of 28.5. The characteristic peaks from Raman and photoluminescence spectroscopy further confirmed Ti2O3-CeO2 nanocomposite formation. Existence of multidimensional nanostructures such as nanoparticles and small nanocubes of Ti2O3-CeO2 nanocomposites were investigated by scanning electron microscope images. Mesoporous nature of Ti2O3-CeO2 nanocomposites was further analyzed by Brunauer-Emmett-Teller analysis. The high surface area could benefit the Ti2O3-CeO2 nanocomposites with greatly improved oxygen evolution reaction (OER) performance. In three molar ratios, 1:3 M ratios of Ti2O3-CeO2 nanocomposites showed high catalytic action at overpotential of 244 mV. The best OER electrocatalyst was obtained by 1:3 M ratios of Ti2O3-CeO2 nanocomposites, which exhibited high current density and high specific capacitance values of 238 mA/g and 517 F/g, respectively. Therefore, Ti/Ce molar ratio played a crucial role in enhancing the OER performance.
Collapse
|
22
|
Artificial intelligence modeling to predict transmembrane pressure in anaerobic membrane bioreactor-sequencing batch reactor during biohydrogen production. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 292:112759. [PMID: 33984638 DOI: 10.1016/j.jenvman.2021.112759] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/22/2020] [Revised: 04/19/2021] [Accepted: 04/19/2021] [Indexed: 06/12/2023]
Abstract
The complex nature of wastewater treatment has led to search for alternative strategies such as different artificial intelligence (AI) techniques to model the various operational parameters. The present work is aimed at predicting the transmembrane pressure (TMP) as a key operational parameter in the case of anaerobic membrane bioreactor-sequencing batch reactor (AnMBR-SBR) during biohydrogen production using the adaptive neuro-fuzzy inference systems (ANFIS) and artificial neural network (ANN). In both the models, organic loading rates (OLR) ranging from 0.5 to 8.0 g COD/L/d, effluent pH (3.6-6.9), mixed liquor suspended solid (4.6-21.5 g/L) and mixed liquor volatile suspended solid (3.7-15.5 g/L) were used as the input parameters to test TMP as an output parameter. The ANFIS model was trained using the hybrid algorithms for TMP prediction. The higher prediction performance was obtained by using the Gauss membership function with four membership numbers. A back-propagation algorithm was also employed for the feed forward training of ANN model; the best structure was a Levenberg-Marquardt training algorithm with nine neurons in the hidden layer. By employing ANFIS and ANN models, relatively a good prediction of TMP was obtained with the R2 values of 0.93 and 0.88, respectively while the calculated mean square error for TMP in the ANFIS model (7.3 × 10-3) was lower than that of ANN model (8.02 × 10-3). The higher R2 and lower MSE values for the ANFIS model exhibited a better TMP prediction performance than the ANN model. Finally, it was observed that in the sensitivity analysis of ANN model, OLR was the most important input parameter on the variation of TMP.
Collapse
|
23
|
Metal chalcogenide-based core/shell photocatalysts for solar hydrogen production: Recent advances, properties and technology challenges. JOURNAL OF HAZARDOUS MATERIALS 2021; 415:125588. [PMID: 33756202 DOI: 10.1016/j.jhazmat.2021.125588] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2020] [Revised: 02/25/2021] [Accepted: 03/02/2021] [Indexed: 06/12/2023]
Abstract
Metal chalcogenides play a vital role in the conversion of solar energy into hydrogen fuel. Hydrogen fuel technology can possibly tackle the future energy crises by replacing carbon fuels such as petroleum, diesel and kerosene, owning to zero emission carbon-free gas and eco-friendliness. Metal chalcogenides are classified into narrow band gap (CdS, Cu2S, Bi2S3, MoS2, CdSe and MoSe2) materials and wide band gap materials (ZnS, ZnSe and ZnTe). Composites of these materials are fabricated with different architectures in which core-shell is one of the unique composites that drastically improve the photo-excitons separation, where chalcogenides in the core can be well protected for sustainable uses. Thus,the core-shell structures promote the design and fabrication of composites with the required characteristics. Interestingly, the metal chalcogenides as a core-shell photocatalyst can be classified into type-I, reverse type-I, type-II and S-type nanocomposites, which can effectively influence and significantly enhance the rate of hydrogen production. In this direction, this review is undertaken to provide a comprehensive overview of the advanced preparation processes, properties of metal chalcogenides, and in particular, photocatalytic performance of the metal chalcogenides as a core-shell photocatalysts for solar hydrogen production.
Collapse
|
24
|
2D Honeycomb-Kagome Polymer Tandem as Effective Metal-Free Photocatalysts for Water Splitting. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2008645. [PMID: 33942398 DOI: 10.1002/adma.202008645] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/22/2020] [Revised: 02/24/2021] [Indexed: 06/12/2023]
Abstract
On the basis of first-principles calculations, the potential of applying 2D honeycomb-kagome polymers made of heteroatom-centered triangulene derivatives to photocatalyze water splitting is explored. The designed 2D polymers possess indirect bandgaps in the range of 1.80-2.84 eV and show pronounced light absorption in the ultraviolet and visible region of the solar spectrum. With suitable band edge alignment, the examined N- and B-center polymers can generate sufficient photon-excited electrons and holes to activate the hydrogen and oxygen evolution reactions, respectively. The combination of lattice-inherent band features (flat bands) with chemical functionalization (potential shift due to heteroatoms) makes it possible to construct tandem cells with suppressed electron/hole recombination for effective overall water splitting. In addition, there is a potential difference between the half-electrodes that can be utlized to power auxiliary components in self-sufficient photocatalyzers.
Collapse
|
25
|
Metal-free in situ carbon-nanotube-modified mesoporous graphitic carbon nitride nanocomposite with enhanced visible light photocatalytic performance. RESEARCH ON CHEMICAL INTERMEDIATES 2021. [DOI: 10.1007/s11164-021-04460-4] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
|
26
|
Abstract
In our review we consider the results on the development and exploration of heterostructured photoactive materials with major attention focused on what are the better ways to form this type of materials and how to explore them correctly. Regardless of what type of heterostructure, metal–semiconductor or semiconductor–semiconductor, is formed, its functionality strongly depends on the quality of heterojunction. In turn, it depends on the selection of the heterostructure components (their chemical and physical properties) and on the proper choice of the synthesis method. Several examples of the different approaches such as in situ and ex situ, bottom-up and top-down, are reviewed. At the same time, even if the synthesis of heterostructured photoactive materials seems to be successful, strong experimental physical evidence demonstrating true heterojunction formation are required. A possibility for obtaining such evidence using different physical techniques is discussed. Particularly, it is demonstrated that the ability of optical spectroscopy to study heterostructured materials is in fact very limited. At the same time, such experimental techniques as high-resolution transmission electron microscopy (HRTEM) and electrophysical methods (work function measurements and impedance spectroscopy) present a true signature of heterojunction formation. Therefore, whatever the purpose of heterostructure formation and studies is, the application of HRTEM and electrophysical methods is necessary to confirm that formation of the heterojunction was successful.
Collapse
|
27
|
Photoelectrocatalytic reactor improvement towards oil-in-water emulsion degradation. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 279:111568. [PMID: 33162233 DOI: 10.1016/j.jenvman.2020.111568] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/22/2020] [Revised: 09/19/2020] [Accepted: 10/22/2020] [Indexed: 06/11/2023]
Abstract
Oil-in-water (O/W) emulsion is critical wastewater that is challenging to eliminate and requires a long treatment process, and it is necessary to develop highly effective removal methods before releasing it into natural water sources. This research has selected the photoelectrocatalytic (PEC) technique to solve this problem by developing a PEC reactor for high efficiency in O/W degradation and understanding the essential factors related to the PEC reactor's efficiency improvement. The PEC reactor has been designed on a large scale with suitable positioning of an electrode that is, designing a light source near the anode electrode to enhance light irradiation efficiency and including a circulating pump to provide continuous flow to the solution through the electrode surface. We studied the main factors of supporting the electrolyte, electrode characteristics, and catalytic process. We investigated the O/W-degradation efficiency using a UV/Vis spectrophotometer, chemical oxygen demand (COD) measurement, and GC-MS analysis. We optimized the PEC reactor using the developed BiVO4 photoanodes and placed them parallel with the zinc plates. Then, we controlled the applied potential at 1.0 V in 0.1 M Na2SO4 supporting an electrolyte under visible light irradiation. The developed PEC reactor can be degraded in the O/W emulsion up to 76% and decreased the COD value up to 78% for 7h. This PEC cell can be completely decomposed of many functional groups, such as carbonyl, ester, nitrile, amine, phosphate, chloro group, and nitro group, that were contained in the O/W substance. The highlight of this research is the designed light source and circulating pump inside of the PEC reactor to enhance the light irradiation, refresh the anode electrode, and understand the critical factor for the improvement of O/W-degradation efficiency. This PEC reactor presents a high-efficiency O/W degradation with practical use and a fast process suitable for further application in high turbidity of wastewater treatment from the oil industry.
Collapse
|
28
|
Simultaneous catalytic reduction of p-nitrophenol and hydrogen production on MIL-101(Fe)-based composites. NEW J CHEM 2021. [DOI: 10.1039/d0nj05874b] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
MIL-101(Fe)-based composite materials and their application for the generation of H2 by the catalytic reduction of nitro organics are reported in this study.
Collapse
|
29
|
A double-Z-scheme ZnO/AgI/WO3 photocatalyst with high visible light activity: Experimental design and mechanism pathway in the degradation of methylene blue. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2020.114563] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|
30
|
Study on Ag2WO4/g-C3N4 Nanotubes as an Efficient Photocatalyst for Degradation of Rhodamine B. J Inorg Organomet Polym Mater 2020. [DOI: 10.1007/s10904-020-01756-7] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
|
31
|
Silk Polymers and Nanoparticles: A Powerful Combination for the Design of Versatile Biomaterials. Front Chem 2020; 8:604398. [PMID: 33335889 PMCID: PMC7736416 DOI: 10.3389/fchem.2020.604398] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2020] [Accepted: 11/09/2020] [Indexed: 12/30/2022] Open
Abstract
Silk fibroin (SF) is a natural protein largely used in the textile industry but also in biomedicine, catalysis, and other materials applications. SF is biocompatible, biodegradable, and possesses high tensile strength. Moreover, it is a versatile compound that can be formed into different materials at the macro, micro- and nano-scales, such as nanofibers, nanoparticles, hydrogels, microspheres, and other formats. Silk can be further integrated into emerging and promising additive manufacturing techniques like bioprinting, stereolithography or digital light processing 3D printing. As such, the development of methodologies for the functionalization of silk materials provide added value. Inorganic nanoparticles (INPs) have interesting and unexpected properties differing from bulk materials. These properties include better catalysis efficiency (better surface/volume ratio and consequently decreased quantify of catalyst), antibacterial activity, fluorescence properties, and UV-radiation protection or superparamagnetic behavior depending on the metal used. Given the promising results and performance of INPs, their use in many different procedures has been growing. Therefore, combining the useful properties of silk fibroin materials with those from INPs is increasingly relevant in many applications. Two main methodologies have been used in the literature to form silk-based bionanocomposites: in situ synthesis of INPs in silk materials, or the addition of preformed INPs to silk materials. This work presents an overview of current silk nanocomposites developed by these two main methodologies. An evaluation of overall INP characteristics and their distribution within the material is presented for each approach. Finally, an outlook is provided about the potential applications of these resultant nanocomposite materials.
Collapse
|
32
|
Photocatalytic and antimicrobial activity of biosynthesized silver and titanium dioxide nanoparticles: A comparative study. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113821] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
33
|
Metal removal and recovery using bioelectrochemical technology: The major determinants and opportunities for synchronic wastewater treatment and energy production. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2020; 270:110826. [PMID: 32721300 DOI: 10.1016/j.jenvman.2020.110826] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/04/2020] [Revised: 05/10/2020] [Accepted: 05/22/2020] [Indexed: 06/11/2023]
Abstract
Microbial fuel cell (MFC) technology has emerged as a new and attractive bioelectrochemical approach in the last one and a half decade that offers an alternative to conventional treatment methods to remove and recover heavy metals and organics from wastewaters with simultaneous energy production. This technique has advantage over the conventional wastewater treatment techniques, which are energy intensive, sludge producing and with little effectivity at high concentrations. Significant work has been done in the recent years on MFC principle, electrode configuration, biofilm composition, application of MFC in wastewater treatment, metal removal or recovery and energy production. Basically, metal in the cathode chamber acts as acceptor of the electrons released from the oxidation of organic matter in the anode chamber by electrogenic microbes. Literature shows that efficacy of MFCs in removal and recovery of metals and power production is significantly influenced by redox potential of the metal, initial concentration, mix metal systems, carbon source in substrate, pH, biocathode, biofilm composition, gaseous environment in cathode, electrode modification and external resistance, which have been critically reviewed for the first time in the present paper to understand the role of the determinant factors that may be explored for improvement of the MFC performance. The paper provides further insights into the techno-economic aspects of MFC technology and suggests research needs for enhanced performance and reduced costs to increase its feasibility for application at commercial level.
Collapse
|
34
|
Fabrication of ILs-Assisted AgTaO 3 Nanoparticles for the Water Splitting Reaction: The Effect of ILs on Morphology and Photoactivity. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E4055. [PMID: 32932666 PMCID: PMC7559565 DOI: 10.3390/ma13184055] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 09/07/2020] [Accepted: 09/10/2020] [Indexed: 11/17/2022]
Abstract
The design of an active, stable and efficient photocatalyst that is able to be used for hydrogen production is of great interest nowadays. Therefore, four methods of AgTaO3 perovskite synthesis, such as hydrothermal, solvothermal, sol-gel and solid state reactions, were proposed in this study to identify the one with the highest hydrogen generation efficiency by the water splitting reaction. The comprehensive results clearly show that the solid state reaction (SSR) led to the obtainment of a sample with an almost seven times higher photocatalytic activity than the other methods. Furthermore, four ionic liquids, all possessing nitrogen in the form of organic cations (two imidazoliums with different anions, ammonium and tetrazolium), were used for the first time to prepare composites consisting of AgTaO3 modified with IL and Pt, simultaneously. The effect of the ionic liquids (ILs) and Pt nanoparticles' presence on the structure, morphology, optical properties, elemental composition and the effectiveness of the hydrogen generation was investigated and discussed. The morphology investigation revealed that the AgTaO3 photocatalysts with the application of [OMIM]-cation based ILs created smaller granules (<500 nm), whereas [TBA] [Cl] and [TPTZ] [Cl] ILs caused the formation of larger particles (up to 2 μm). We found that various ILs used for the synthesis did not improve the photocatalytic activity of the obtained samples in comparison with pristine AgTaO3. It was detected that the compound with the highest ability for hydrogen generation under UV-Vis irradiation was the AgTaO3_0.2% Pt (248.5 μmol∙g-1), having an almost 13 times higher efficiency in comparison with the non-modified pristine sample. It is evidenced that the enhanced photocatalytic activity of modified composites originated mainly from the presence of the platinum particles. The mechanism of photocatalytic H2 production under UV-Vis light irradiation in the presence of an AgTaO3_IL_Pt composite in the water splitting reaction was also proposed.
Collapse
|
35
|
Z-scheme binary 1D ZnWO 4 nanorods decorated 2D NiFe 2O 4 nanoplates as photocatalysts for high efficiency photocatalytic degradation of toxic organic pollutants from wastewater. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2020; 268:110677. [PMID: 32383655 DOI: 10.1016/j.jenvman.2020.110677] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/24/2020] [Revised: 04/23/2020] [Accepted: 04/29/2020] [Indexed: 06/11/2023]
Abstract
In this study, dimensionally coupled Z-scheme binary nanocomposites from two-dimensional (2D) NiFe2O4 nanoplates and one-dimensional (1D) ZnWO4 nanorods are prepared for efficient degradation of an antibiotic tetracycline (TC) and organic dye rhodamine B (RhB) under solar illumination. NiFe2O4/ZnWO4 nanocomposites were synthesized by a simple and ecological in-situ hydrothermal method without the use of surfactants. Structural and morphological studies revealed the formation of heterostructure and 1D ZnWO4 nanorods were uniformly distributed over the surface of NiFe2O4 nanoplates. Light-harvesting capability was improved and optimized by loading with different amounts of ZnWO4. Photoluminescence analysis demonstrated inhibited nature of the recombination of photo-excited charge carriers in the nanocomposites. Photocatalytic experiments revealed that the nanocomposite exhibited improved Z-scheme electron-transfer for the degradation of TC under solar illumination. In particular, NFZW-20 nanocomposite demonstrated superior photocatalytic degradation of TC of approximately 98% within 105 min. Furthermore, their photocatalytic performance was investigated by RhB dye under the solar irradiation to achieve 98% of degradation of RhB in 70 min. Improved photocatalytic activities are attributed to the Z-scheme electron-transfer mechanism, which could enhance the superior ability of light absorption and reduced recombination rate of the photogenerated charge carriers.
Collapse
|
36
|
Molecular biohydrogen production by dark and photo fermentation from wastes containing starch: recent advancement and future perspective. Bioprocess Biosyst Eng 2020; 44:1-25. [PMID: 32785789 DOI: 10.1007/s00449-020-02422-5] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2020] [Accepted: 08/05/2020] [Indexed: 01/15/2023]
Abstract
Changing lifestyle is increasing the energy demand. Fossil fuel is unable to deliver such huge energy. Clean energy from renewable source can solve this problem. Hydrogen is a clean and energy-efficient fuel and used for electricity generation by fuel cells or can be used in combustion engine. Easy availability of starch wastes from different industrial food processing wastes makes it a potential source for hydrogen (H2) generation. Among various processes such as steam reforming, electrolysis, biophotolysis of water and anaerobic fermentation, anaerobic fermentation technique is environmentally friendly and requires less external energy, making it a preferred process for H2 generation. Dark fermentation process can use wide range of substrates including agricultural and industrial starchy waste with low level of undesirable compounds. Application of both anaerobic dark and photofermentation can improve H2 yield and production rate. H2 production from wastes containing starch serves dual benefit of waste reduction and energy generation. As starch is a polymer and all hydrogen-producing bacteria cannot produce amylase to hydrolyze it, a pretreatment step is required to convert starch into glucose and maltose. In this present review paper, we have summarized: (i) potential of various types of starch-containing wastes as feedstock, (ii) various fermentation techniques, (iii) optimization of external process parameter, (iv) application of bioreactor and simulation in fermentation technique and (v) advancement in H2 production from starchy wastes.
Collapse
|
37
|
Unravelling the Mechanisms that Drive the Performance of Photocatalytic Hydrogen Production. Catalysts 2020. [DOI: 10.3390/catal10080901] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022] Open
Abstract
The increasing interest and applications of photocatalysis, namely hydrogen production, artificial photosynthesis, and water remediation and disinfection, still face several drawbacks that prevent this technology from being fully implemented at the industrial level. The need to improve the performance of photocatalytic processes and extend their potential working under visible light has boosted the synthesis of new and more efficient semiconductor materials. Thus far, semiconductor–semiconductor heterojunction is the most remarkable alternative. Not only are the characteristics of the new materials relevant to the process performance, but also a deep understanding of the charge transfer mechanisms and the relationship with the process variables and nature of the semiconductors. However, there are several different charge transfer mechanisms responsible for the activity of the composites regardless the synthesis materials. In fact, different mechanisms can be carried out for the same junction. Focusing primarily on the photocatalytic generation of hydrogen, the objective of this review is to unravel the charge transfer mechanisms after the in-depth analyses of already reported literature and establish the guidelines for future research.
Collapse
|
38
|
Development of nitrogen doped carbon dots modified CuCo alloy nanoparticles for potential electrocatalytic water splitting. J Mol Liq 2020. [DOI: 10.1016/j.molliq.2020.113111] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
|
39
|
Facile synthesis of TiO 2/Ag 3PO 4 composites with co-exposed high-energy facets for efficient photodegradation of rhodamine B solution under visible light irradiation. RSC Adv 2020; 10:24555-24569. [PMID: 35516206 PMCID: PMC9055145 DOI: 10.1039/d0ra04183a] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2020] [Accepted: 06/19/2020] [Indexed: 11/21/2022] Open
Abstract
In this study, TiO2/Ag3PO4 composites based on anatase TiO2 nanocrystals with co-exposed {101}, {010}/{100}, {001} and [111]-facets and Ag3PO4 microcrystals with irregular and cubic-like polyhedron morphologies were successfully synthesized by combining hydrothermal and ion-exchange methods. The anatase TiO2 nanocrystals with different high-energy facets were controllably prepared via hydrothermal treatment of the exfoliated [Ti4O9]2−/[Ti2O5]2− nanosheet solutions at desired pH values. The Ag3PO4 microcrystal with different morphologies was prepared via the ion-exchange method in the presence of AgNO3 and NH4H2PO4 at room temperature, which was used as a substrate to load the as-prepared anatase TiO2 nanocrystals on its surface and to form TiO2/Ag3PO4 heterostructures. The apparent rate constant of the pH 3.5-TiO2/Ag3PO4 composite was the highest at 12.0 × 10−3 min−1, which was approximately 1.1, 1.2, 1.4, 1.6, 13.3, and 24.0 fold higher than that of pH 0.5-TiO2/Ag3PO4 (10.5 × 10−3 min−1), pH 7.5-TiO2/Ag3PO4 (10.2 × 10−3 min−1), pH 11.5-TiO2 (8.8 × 10−3 min−1), Ag3PO4 (7.7 × 10−3 min−1), blank sample (0.9 × 10−3 min−1), and the commercial TiO2 (0.5 × 10−3 min−1), respectively. The pH 3.5-TiO2/Ag3PO4 composite exhibited the highest visible-light photocatalytic activity which can be attributed to the synergistic effects of its heterostructure, relatively small crystal size, large specific surface area, good crystallinity, and co-exposed high-energy {001} and [111]-facets. The as-prepared TiO2/Ag3PO4 composites still exhibited good photocatalytic activity after three successive experimental runs, indicating that they had remarkable stability. This study provides a new way for the preparation of TiO2/Ag3PO4 composite semiconductor photocatalysts with high energy crystal surfaces and high photocatalytic activity. TiO2/Ag3PO4 composites with co-exposed {101}, {010}/{100}, {001} and [111]-facets were successfully synthesized by combining hydrothermal and ion-exchange methods.![]()
Collapse
|
40
|
A Versatile Material: Perovskite Bismuth Ferrite Microparticles as a Potential Catalyst for Enhancing Fuel Efficiency and Degradation of Various Organic Dyes. J Inorg Organomet Polym Mater 2020. [DOI: 10.1007/s10904-020-01520-x] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
41
|
A review on exploration of Fe 2O 3 photocatalyst towards degradation of dyes and organic contaminants. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2020; 258:110050. [PMID: 31929077 DOI: 10.1016/j.jenvman.2019.110050] [Citation(s) in RCA: 118] [Impact Index Per Article: 29.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/06/2019] [Revised: 12/11/2019] [Accepted: 12/28/2019] [Indexed: 05/20/2023]
Abstract
Photocatalytic degradation is among the promising technology for removal of various dyes and organic contaminants from environment owing to its excellent catalytic activity, low energy utilization, and low cost. As one of potential photocatalysts, Fe2O3 has emerged as an important material for degradation of numerous dyes and organic contaminants caused by its tolerable band gap, wide harvesting of visible light, good stability and recyclability. The present review thoroughly summarized the classification, synthesis route of Fe2O3 with different morphologies, and several modifications of Fe2O3 for improved photocatalytic performance. These include the incorporation with supporting materials, formation of heterojunction with other semiconductor photocatalysts, as well as the fabrication of Z-scheme. Explicitly, the other photocatalytic applications of Fe2O3, including for removal of heavy metals, reduction of CO2, evolution of H2, and N2 fixation are also deliberately discussed to further highlight the huge potential of this catalyst. Moreover, the prospects and future challenges are also comprised to expose the unscrutinized criteria of Fe2O3 photocatalyst. This review aims to contribute a knowledge transfer for providing more information on the potential of Fe2O3 photocatalyst. In the meantime, it might give an idea for utilization of this photocatalyst in other environmental remediation application.
Collapse
|
42
|
Recent Achievements in Development of TiO 2-Based Composite Photocatalytic Materials for Solar Driven Water Purification and Water Splitting. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E1338. [PMID: 32183457 PMCID: PMC7142427 DOI: 10.3390/ma13061338] [Citation(s) in RCA: 51] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/03/2020] [Revised: 03/06/2020] [Accepted: 03/11/2020] [Indexed: 01/20/2023]
Abstract
Clean water and the increased use of renewable energy are considered to be two of the main goals in the effort to achieve a sustainable living environment. The fulfillment of these goals may include the use of solar-driven photocatalytic processes that are found to be quite effective in water purification, as well as hydrogen generation. H2 production by water splitting and photocatalytic degradation of organic pollutants in water both rely on the formation of electron/hole (e-/h+) pairs at a semiconducting material upon its excitation by light with sufficient photon energy. Most of the photocatalytic studies involve the use of TiO2 and well-suited model compounds, either as sacrificial agents or pollutants. However, the wider application of this technology requires the harvesting of a broader spectrum of solar irradiation and the suppression of the recombination of photogenerated charge carriers. These limitations can be overcome by the use of different strategies, among which the focus is put on the creation of heterojunctions with another narrow bandgap semiconductor, which can provide high response in the visible light region. In this review paper, we report the most recent advances in the application of TiO2 based heterojunction (semiconductor-semiconductor) composites for photocatalytic water treatment and water splitting. This review article is subdivided into two major parts, namely Photocatalytic water treatment and Photocatalytic water splitting, to give a thorough examination of all achieved progress. The first part provides an overview on photocatalytic degradation mechanism principles, followed by the most recent applications for photocatalytic degradation and mineralization of contaminants of emerging concern (CEC), such as pharmaceuticals and pesticides with a critical insight into removal mechanism, while the second part focuses on fabrication of TiO2-based heterojunctions with carbon-based materials, transition metal oxides, transition metal chalcogenides, and multiple composites that were made of three or more semiconductor materials for photocatalytic water splitting.
Collapse
|
43
|
Visible light sensitization of TiO2/Ag/N nanostructures synthesized by microwave irradiation for oxidative degradation of organic dyes. SN APPLIED SCIENCES 2020. [DOI: 10.1007/s42452-020-2343-x] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023] Open
|
44
|
Nitrogen-doped carbon quantum dots-decorated 2D graphitic carbon nitride as a promising photocatalyst for environmental remediation: A study on the importance of hybridization approach. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2020; 255:109936. [PMID: 32063312 DOI: 10.1016/j.jenvman.2019.109936] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/25/2019] [Revised: 11/15/2019] [Accepted: 11/25/2019] [Indexed: 06/10/2023]
Abstract
Growing concerns of water pollution by dye pollutants from the textile industry has led to vast research interest to find green solutions to address this issue. In recent years, heterogeneous photocatalysis has harvested tremendous attention from researchers due to its powerful potential applications in tackling many important energy and environmental challenges at a global level. To fully utilise the broad spectrum of solar energy has been a common aim in the photocatalyst industry. This study focuses on the development of an efficient, highly thermal and chemical stable, environmentally friendly and metal-free graphitic carbon nitride (g-C3N4) to overcome the problem of fast charge recombination which hinders photocatalytic performances. Nitrogen-doped carbon quantum dots (NCQDs) known for its high electronic and optical functionality properties is believed to achieve photocatalytic enhancement by efficient charge separation through forming heterogeneous interfaces. Hence, the current work focuses on the hybridisation of NCQDs and g-C3N4 to produce a composite photocatalyst for methylene blue (MB) degradation under LED light irradiation. The optimal hybridisation method and the mass loading required for maximum attainable MB degradation were systematically investigated. The optimum photocatalyst, 1 wt% NCQD/g-C3N4 composite was shown to exhibit a 2.6-fold increase in photocatalytic activity over bare g-C3N4. Moreover, the optimum sample displayed excellent stability and durability after three consecutive degradation cycles, retaining 91.2% of its original efficiency. Scavenging tests were also performed where reactive species, photon-hole (h+) was identified as the primary active species initiating the pollutant degradation mechanism. The findings of this study successfully shed light on the hybridisation methods of NCQDs which improve existing g-C3N4 photocatalyst systems for environmental remediation by utilising solar energy.
Collapse
|
45
|
Graphene quantum dot-sensitized Zn-MOFs for efficient visible-light-driven carbon dioxide reduction. Catal Sci Technol 2020. [DOI: 10.1039/d0cy00842g] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
A new hybrid Zn-Bim-His-1@GQD nanoparticle has been successfully developed for high selectivity of CO2 reduction to yield CH4.
Collapse
|
46
|
Nonmetallic Abiotic-Biological Hybrid Photocatalyst for Visible Water Splitting and Carbon Dioxide Reduction. iScience 2019; 23:100784. [PMID: 31962238 PMCID: PMC6971392 DOI: 10.1016/j.isci.2019.100784] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2019] [Revised: 11/22/2019] [Accepted: 12/12/2019] [Indexed: 12/14/2022] Open
Abstract
Both artificial photosystems and natural photosynthesis have not reached their full potential for the sustainable conversion of solar energy into specific chemicals. A promising approach is hybrid photosynthesis combining efficient, non-toxic, and low-cost abiotic photocatalysts capable of water splitting with metabolically versatile non-photosynthetic microbes. Here, we report the development of a water-splitting enzymatic photocatalyst made of graphitic carbon nitride (g-C3N4) coupled with H2O2-degrading catalase and its utilization for hybrid photosynthesis with the non-photosynthetic bacterium Ralstonia eutropha for bioplastic production. The g-C3N4-catalase system has an excellent solar-to-hydrogen efficiency of 3.4% with a H2 evolution rate up to 55.72 μmol h−1 while evolving O2 stoichiometrically. The hybrid photosynthesis system built with the water-spitting g-C3N4-catalase photocatalyst doubles the production of the bioplastic polyhydroxybutyrate by R. eutropha from CO2 and increases it by 1.84-fold from fructose. These results illustrate how synergy between abiotic non-metallic photocatalyst, enzyme, and bacteria can augment solar-to-multicarbon chemical conversion. H2O2-degrading enzymes from R. eutropha enable visible-light water splitting by C3N4 C3N4 coupled with bovine catalase has a solar-to-hydrogen efficiency of 3.4% C3N4-catalase increases CO2 conversion into bioplastic under light by R. eutropha Heterotrophic bioplastic production by R. eutropha is also improved by C3N4-catalase
Collapse
|
47
|
Band gap tuning and surface modification of carbon dots for sustainable environmental remediation and photocatalytic hydrogen production - A review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2019; 250:109486. [PMID: 31518793 DOI: 10.1016/j.jenvman.2019.109486] [Citation(s) in RCA: 74] [Impact Index Per Article: 14.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/14/2019] [Revised: 08/27/2019] [Accepted: 08/27/2019] [Indexed: 05/06/2023]
Abstract
Energy and water are the two major issues facing the modern mankind. Providing freshwater requires energy and producing energy uses water. In the present-day scenario, both these routes face growing problems and limitations. Energy crisis has risen due to the depletion of fossil fuels that cause pollution to water bodies making the water unusable for human consumption. In this regard, semiconductor nanocrystals with luminescent properties or carbon quantum dots (CQDs) are the newly developed nanomaterials whose distinctive photo-physical characteristics are focusing to a new generation of robust materials and sensors for sustainable development. In this review, advances in surface and band gap modification of CQDs to improve the activity of nanomaterials will be discussed with special reference to some specific CQDs exhibiting special optical properties for water treatment/splitting applications. Recent advances on CQDs nanocomposites including their applications in photodegradation of organic pollutants, sensing of heavy metal ions in water and water splitting are discussed critically to narrate the future prospects in this field. Challenges and limitations for further improvement are covered to provide smart choices for creating sustainability of benign environment and economic benefits.
Collapse
|