Enhancing robustness of activated sludge with Aspergillus tubingensis as a protective backbone structure under high-salinity stress

Improving microbial activity in high-salt wastewater: A review of innovative approaches

The Zero discharge technology has become an important pathroute for sustainable development of high salt wastewater treatment. However, the cohabitation of organic and inorganic debris can cause serious problems such membrane clogging and the formation of hazardous impurity salts that further restrict the recovery of all salt varieties by evaporating and crystallizing. In highly salinized wastewater, biological treatments offer advantages in terms of cost and sustainability when used as a pre-treatment step to eliminate organic debris. On the other hand, high salinity is always a major obstacle to microbial diversity, abundance, and activity, which can result in low organic matter removal effectiveness or the failure of the microbial treatment system. Biofortification techniques can attenuate the negative effects of salt stress and other unfavourable conditions on microorganisms, while the regulation mechanisms of microbial and community collaboration by fortification methods have been an open question. Therefore, a comprehensive summary of the types, mechanisms, and effects of the major biofortification techniques is proposed. This review dialyzes the characteristics and sources of hypersaline wastewater and the main treatment methods. Then, the mechanisms of microbial salt tolerance are summarized and discussed based on microbial characteristics and the protective effects provided by the processes. Finally, the research and application of the main bioaugmentation methods are developed in detail, describing the characteristics, advantages and disadvantages of the different enhancement methods in their implementation. This review provides a more comprehensive perspective on the future engineering applications of bioaugmentation technology, and explores in depth the possibilities of applying biological methods to high-salinity wastewater treatment.

Biotechnological potential of salt tolerant and xerophilic species of Aspergillus

Xerophilic fungi occupy versatile environments owing to their rich arsenal helping them successfully adapt to water constraints as a result of low relative humidity, high-osmolarity, and high-salinity conditions. The general term xerophilic fungi relates to organisms that tolerate and/or require reduced water activity, while halophilic and osmophilic are applied to specialized groups that require high salt concentrations or increased osmotic pressure, respectively. Species belonging to the family Aspergillaceae, and especially those classified in Aspergillus subgenus Aspergillus (sections Restricti and Aspergillus) and Polypaecilum, are particularly enriched in the group of osmophilic and salt-tolerant filamentous fungi. They produce an unprecedently wide spectrum of salt tolerant enzymes including proteases, peptidases, glutaminases, γ-glutamyl transpeptidases, various glycosidases such as cellulose-decomposing and starch-degrading hydrolases, lipases, tannases, and oxidareductases. These extremophilic fungi also represent a huge untapped treasure chest of yet-to-be-discovered, highly valuable, biologically active secondary metabolites. Furthermore, these organisms are indispensable agents in decolorizing textile dyes, degrading xenobiotics and removing excess ions in high-salt environments. They could also play a role in fermentation processes at low water activity leading to the preparation of daqu, meju, and tea. Considering current and future agricultural applications, salt-tolerant and osmophilic Aspergilli may contribute to the biosolubilization of phosphate in soil and the amelioration salt stress in crops. Transgenes from halophile Aspergilli may find promising applications in the engineering of salt stress and drought-tolerant agricultural crops. Aspergilli may also spoil feed and food and raise mycotoxin concentrations above the permissible doses and, therefore, the development of novel feed and food preservation technologies against these Aspergillus spp. is also urgently needed. On the other hand, some xerophilic Aspergilli have been shown to be promising biological control agents against mites. KEY POINTS: • Salt tolerant and osmophilic Aspergilli can be found in versatile environments • These fungi are rich resources of valuable enzymes and secondary metabolites • Biotechnological and agricultural applications of these fungi are expanding.

Ultra-rapid development of 'solid' aerobic granular sludge by stable transition/filling of inoculated 'hollow' mycelial pellets in hypersaline wastewater

To overcome the long start-up period in cultivating aerobic granular sludge (AGS) under hypersaline environment, mycelial pellets (MPs) of halotolerant fungus Cladosporium tenuissimum NCSL-XY8 were inoculated to try to realize the ultra-rapid development of salt-tolerant AGS by stable transition of 'hollow' MPs into 'solid' AGS without apparent fragmentation. The granules directly met the standard of AGS after inoculating MPs (Day 0), and it basically satisfied relatively strict standards of AGS (SVI30 < 50 mL/g, D50 > 300 μm, D10 > 200 μm and SVI30/SVI5 > 0.9) under anaerobic/aerobic mode during whole cultivation processes. Microstructure of the granular cross section clarified that MPs with hollow/loose inner layer transitioned into solid/dense AGS under anaerobic/aerobic mode within 7 days, while formed skin-like floating pieces and unstable double-layer hollow granules under aerobic mode. Organics removal reached relatively stable within 13 days under anaerobic/aerobic mode, 6 days faster than aerobic mode. This study provided a strategy for ultra-rapid and stable development of AGS, which showed the shortest granulation period in various AGS-cultivation strategies.

Exploring synthesis and applications of green nanoparticles and the role of nanotechnology in wastewater treatment

Current research endeavours are progressively focussing towards discovering sustainable methods for synthesising eco-friendly materials. In this environment, nanotechnology has emerged as a key frontier, especially in bioremediation and biotechnology. A few areas of nanotechnology including membrane technology, sophisticated oxidation processes, and biosensors. It is possible to create nanoparticles (NPs) via physical, chemical, or biological pathways in a variety of sizes and forms. These days, the investigation of plants as substitutes for NP synthesis methods has drawn a lot of interest. Toxic water contaminants such as methyl blue have been shown to be removed upto 70% by nanoparticles. In our article, we aimed at focussing the environmental sustainability and cost-effectiveness towards the green synthesis of nanoparticles. Furthermore it offers a comprehensive thorough summary of green NP synthesis methods which can be distinguished by their ease of use, financial sustainability, and environmentally favourable utilization of plant extracts. This study highlights how green synthesis methods have the potential to transform manufacturing of NPs while adhering to environmental stewardship principles and resource efficiency.

Rapid, stable, and highly-efficient development of salt-tolerant aerobic granular sludge by inoculating magnetite-assisted mycelial pellets

Long cultivation time hinders the industrial applications of aerobic granular sludge (AGS) in treatment of hypersaline wastewater. Mycelial pellets (MPs) have been used to efficiently strengthen the flocculent sludge aggregation and accelerate the formation of AGS. However, the MPs-based AGS was easily crushed or fragmented into several small pieces/granules that brought the uncertainty and extended the transition process to form mature AGS. In this study, magnetite was used to strengthen MPs (halotolerant fungus Cladosporium tenuissimum NCSL-XY8), and co-culture and adsorption type of magnetite-assisted mycelial pellets (CMMPs and AMMPs) were prepared and used for acceleration of salt-tolerant aerobic granular sludge (SAGS) cultivation under 3% salinity conditions. Compared to inoculating MPs, the inoculation of either CMMPs or AMMPs could stably transition to mature SAGS without evident fragmentation, which obviously increased the certainty and stability of SAGS formation. Also, highly-efficient simultaneous nitrogen and carbon removal (∼98% TOC and ∼80% TN removal) could be reached in 8 days. Typically, the granules maintained perfect characteristics (D50 > 1300 μm, D10 > 350 μm, SVI30 < 45 mL/g, and SVI30/SVI5 = 1.0) during the whole cultivation/transition processes (Day 0-55) by using the inoculum of CMMPs. ITS rDNA sequencing revealed the inoculated fungus Cladosporium tenuissimum played key roles in the formation of SAGS. All the phenomena indicated the rapid, stable, and highly-efficient start-up of SAGS could be successfully realized by inoculating CMMPs.

Responses of straw foam-based aerobic granular sludge to atrazine: Insights from metagenomics and microbial community variations

Atrazine (ATZ) has caused serious environmental pollution, but the biodegradation of ATZ is relatively slow and inefficient. Herein, a straw foam-based aerobic granular sludge (SF-AGS) was developed, the spatially ordered architectures of which could greatly improve the drug tolerance and biodegradation efficiency of ATZ. The results showed that, in the presence of ATZ, chemical oxygen demand (COD), ammonium nitrogen (NH₄⁺-N), total phosphorus (TP), and total nitrogen (TN) were effectively removed within 6 h, and the removal efficiencies were as high as 93.37%, 85.33%, 84.7%, and 70%, respectively. Furthermore, ATZ stimulated microbial consortia to secrete three times more extracellular polymers compared to without ATZ. Illumina MiSeq sequencing results showed that bacterial diversity and richness decreased, leading to significant changes in microbial population structure and composition. ATZ-resistant bacteria including Proteobacteria, Actinobacteria, and Burkholderia laid the biological basis for the stability of aerobic particles, efficient removal of pollutants, and degradation of ATZ. The study demonstrated that SF-AGS is feasible for ATZ-laden low-strength wastewater treatment.

Artificially constructing mixed bacteria system for bioaugmentation of nitrogen removal from saline wastewater at low temperature

To alleviate the inhibition effects of multi-stresses, a multi-bacterial bioaugmentation based on stimulating cell-to-cell interactions was applied to improve the stress potential of salt-tolerant aerobic granular sludge (AGS). Results showed that the consortium formed by a combination of salt-tolerant ammonia-nitrogen utilizing bacteria, salt-tolerant nitrite-nitrogen utilizing bacteria and salt-tolerant nitrate-nitrogen utilizing bacteria with a whole biomass ratio of 1:2:1 achieved maximum nitrogen consumption rate (μNH₄⁺-N, μNO₂^--N and μNO₃^--N of 1.03, 0.57 and 11.62 mgN/L·h, respectively) at 35 gNaCl/L salinity and 15 °C. The flocculent consortium was aggregated by Aspergillus tubingensis mycelium pellet, which was made into a compound bacterial agent (CBA), and the comprehensive nitrogen consumption capability of CBA was further improved to 2.47-4.36-fold of single functional bacteria. 5% CBA (m/m) was introduced into the seafood processing wastewater in batches, in winter (12-16 °C), the removal efficiencies of NH₄⁺-N and total nitrogen increased from 66.89% to 52.77% of native AGS system to 79.02% and 69.97% of nascent bioaugmentation system, respectively. The analysis of key enzyme activities demonstrated that the ammonia monooxygenase and nitrate reductase activities of the bioaugmentation system were increased to 2.73-folds and 1.94-folds those of the native system. Moreover, due to an increase of 6.18 mg/gVSS and 0.11 in the secreted exopolysaccharide and tightly-bound/total extracellular polymeric substances, respectively, bioaugmentation boosted the cell bioflocculation ability by 13.53%, which enhanced the robustness. This work provided a detailed and feasible technical proposal for enhancing the biological treatment performance of saline wastewater in cold regions.

Metagenomic analysis and nitrogen removal performance evaluation of activated sludge from a sequencing batch reactor under different salinities

The effect of salinity on the nitrogen removal performance and microbial community of activated sludge was investigated in a sequencing batch reactor. The NH₄⁺-N removal efficiency was over 95% at 0-4% salinity, indicating that the nitrification performance of activated sludge was slightly affected by lower salinity. The obvious nitrite accumulation was observed with the increment of the salinity to 5%, followed by a notable decline in the nitrogen removal performance at 6% salinity. The salinity inhibited the microbial activity, and the specific rate of nitrification and denitrification was decreased by the increasing salinity obviously. Additionally, the lower activity of superoxide dismutase and peroxidase and higher reactive oxygen species content in activated sludge might account for the deteriorative nitrogen removal performance at 6% salinity. Metagenomics analysis revealed that the genes encoding the ABC-type quaternary amine transporter in the ABC transporter pathway were abundant in the activated sludge at 2% and 4% salinity, and the higher salinity of 6% led to the loss of the genes encoding the p-type Na⁺ transporter in the ABC transporter pathway. These results indicated that the salinity could weaken the ABC transporter pathway for the balance of osmotic pressure in activated sludge. The microbial activity and nitrogen removal performance of activated sludge were decreased due to the unbalanced osmotic pressure at higher salinity.

Adaptive regulation of activated sludge's core functional flora based on granular internal spatial microenvironment

A great deal of efforts has been put into studying the influence of the external macroenvironment for activated sludge to survive on microbial community succession, while granular internal spatial microenvironment should be given equal attention, because it is more directly involved in the information exchange and material transfer among microorganisms. This study systematically investigated the effects of granular microenvironment on spatial colonization and composition of sludge's core functional flora, and the corresponding difference of biological treatment performance. High content of extracellular-proteins (67.53 mg/gVSS) or extracellular-polysaccharide (65.02 mg/gVSS) stimulated the microbial flocculation and aggregation of 0.5-1.5 mm granules (GS) or 1.5-3.0 mm granules (GM), respectively, which was resulted from excellent cell hydrophobicity (59.26%) or viscosity (3.47 mPa s), therefore, constituted relatively dense porous frame. More hollow space existed in 3.0-5.0 mm granules (GL), which formed loose skeleton with 0.213 mL/g of total pore volume and 17.21 nm of average pore size. Combining scanning electron microscope images and fluorescent in-situ hybridization based microbiological analysis, aerobic nitrifiers were observed to wrap or surround anaerobic bacteria, or facultative/anaerobic bacteria were self-encapsulated, which created granule's unique microenvironment with alternating aerobic and anaerobic zones. GS has the most rich organic matter degrading bacteria and anaerobic heterotrophic denitrifiers, while GM and GL presented the greatest relative abundance of facultative and aerobic denitrifiers, respectively. The activity of dehydrogenase and nitrogen invertase of GM showed be 1.32-3.09 times higher than those of GS and GL, contributing to its higher carbon and nitrogen removal. These findings highlight the importance of granular microenvironment to adaptive regulation of activated sludge's core functional flora and corresponding pollutant removal performance.