Construction of core-shell Fe3O4@GO-CoPc photo-Fenton catalyst for superior removal of tetracycline: The role of GO in promotion of H2O2 to •OH conversion

Z-scheme Fe@Fe2O3/BiOBr heterojunction with efficient carrier separation for enhanced heterogeneous photo-Fenton activity of tetracycline degradation: Fe2+ regeneration, mechanism insight and toxicity evaluation

The recombination of photogenerated carrier leads to inefficient Fe2+ regeneration, which limits the extensive application of heterogeneous photo-Fenton. Here, a novel Fe@Fe2O3/BiOBr catalyst with Z-scheme heterojunction structure is designed, and the establishment of the Z-scheme heterojunction facilitates the separation and transfer of photogenerated carrier and maintains the superior redox capability of the system. As-prepared Fe@Fe2O3/BiOBr catalyst exhibits outstanding catalytic performance and stability, especially for the optimum composite FFB-3, its degradation efficiency of tetracycline (TC) achieves 98.22% and the mineralization degree reaches 59.48% within 90 min under natural pH. The preeminent catalytic efficiency benefited from the synergistic of heterogeneous photo-Fenton and Z-scheme carriers transfer mechanism, where Fe2+ regeneration was achieved by photogenerated electrons, and increased hydroxyl radicals were produced with the participation of H2O2 in-situ generated. The results of free-radical scavenging experiment and ESR illustrated that •OH, •O2-, 1O2 and h+ were active species participating in TC degradation. Furthermore, the TC degradation paths were proposed according to LC-MS, and the toxicity evaluation result showed that the toxicity of TC solutions was markedly decreased after degradation. This study provides an innovative strategy for heterogeneous photo-Fenton degradation of antibiotic contaminations by constructing Z-scheme heterojunctions.

Electrocatalysis coupled heterogeneous electro-Fenton like treatment of coal gasification wastewater using tourmaline as catalyst: process parameters and response surface

Coal gasification technology is essential for realizing clean and efficient conversion of coal, as well as for reducing carbon emissions. However, coal gasification technology is accompanied by a large amount of coal gasification wastewater that is biodegradable. In this work, tourmaline was applied as a catalyst in electro-Fenton like process for treating coal gasification wastewater. The optimal applied parameters of coal gasification wastewater were investigated as follows: current density of 90 mA cm-2, tourmaline dosage of 8 g L-1, electrode gap of 1 cm, and temperature at 25 °C; the COD removal ratio reached 91.24% after 240-min treatment. In addition, the current density and tourmaline dosage were further optimized by response surface method. The result was about current density with 82.4 mA cm-2 and catalyst with 7.57 g L-1; the predicted COD removal efficiency was 86.91%. Under the optimal parameters the actual COD removal efficiency was 88.25% a little high than the predicted value. To explore the reusability of tourmaline as Fenton reaction catalyst, five cycles of experiments were carried out. The result demonstrated that tourmaline could be used as catalyst for treating coal gasification wastewater by electro-Fenton like process.

Iron oxide magnetic aggregates: Aspects of synthesis, computational approaches and applications

Superparamagnetic magnetite nanoparticles have been central to numerous investigations in the past few decades for their use in many applications, such as drug delivery, medical diagnostics, magnetic separation, and material science. However, the properties of single magnetic nanoparticles are sometimes not sufficient to accomplish tasks where a strong magnetic response is required. In light of this, aggregated magnetite nanoparticles have been proposed as an alternative advanced material, which may expand and combine some of the advantages of single magnetic nanoparticles, including superparamagnetism, with an enhanced magnetic moment and increased colloidal stability. This review comprehensively discusses the current literature on aggregates made of magnetic iron oxide nanoparticles. This review is divided into three sections. First, the current synthetic strategies for magnetite nanoparticle aggregates are discussed, together with the influence of different stabilizers on the primary crystals and the final aggregate size and morphology. The second section is dedicated to computational approaches, such as density functional methods (which permit accurate predictions of electronic and magnetic properties and shed light on the behavior of surfactant molecules on iron oxide surfaces) and molecular dynamics simulations (which provide additional insight into the influence of ligands on the surface chemistry of iron oxide nanocrystals). The last section discusses current and possible future applications of iron oxide magnetic aggregates, including wastewater treatment, water purification, medical applications, and magnetic aggregates for materials displaying structural colors.

The beneficial role of nano-sized Fe3O4 entrapped in ultra-stable Y zeolite for the complete mineralization of phenol by heterogeneous photo-Fenton under solar light

Highly efficient, separable, and stable magnetic iron-based-photocatalysts produced from ultra-stable Y (USY) zeolite were applied, for the first time, to the photo-Fenton removal of phenol under solar light. USY Zeolite with a Si/Al molar ratio of 385 was impregnated under vacuum with an aqueous solution of Fe2+ ions and thermally treated (500-750 °C) in a reducing atmosphere. Three catalysts, Fe-USY500°C-2h, Fe-USY600°C-2h and Fe-USY750°C-2h, containing different amounts of reduced iron species entrapped in the zeolitic matrix, were obtained. The catalysts were thoroughly characterized by absorption spectrometry, X-ray powder diffraction with synchrotron source, followed by Rietveld analysis, X-ray photoelectron spectroscopy, N2 adsorption/desorption at -196 °C, high-resolution transmission electron microscopy and magnetic measurements at room temperature. The catalytic activity was evaluated in a recirculating batch photoreactor irradiated by solar light with online analysis of evolved CO2. Photo-Fenton results showed that the catalyst obtained by thermal treatment at 500 °C for 2 h under a reducing atmosphere (FeUSY-500°C-2h) was able to completely mineralize phenol in 120 min of irradiation time at pH = 4 owing to the presence of a higher content of entrapped nano-sized magnetite particles. The latter promotes the generation of hydroxyl radicals in a more efficient way than the Fe-USY catalysts prepared at 600 and 750 °C because of the higher Fe3O4 content in ultra-stable Y zeolite treated at 500 °C. The FeUSY-500°C-2h catalyst was recovered from the treated water through magnetic separation and reused five times without any significant worsening of phenol mineralization performances. The characterization of the FeUSY-500°C-2h after the photo-Fenton process demonstrated that it was perfectly stable during the reaction. The optimized catalyst was also effective in the mineralization of phenol in tap water. Finally, a possible photo-Fenton mechanism for phenol mineralization was assessed based on experimental tests carried out in the presence of scavenger molecules, demonstrating that hydroxyl radicals play a major role.

Cu3(hexaamino triphenylhexane)2/reduced graphene oxide composites with boosting electron-transfer properties for acetaminophen electrocatalytic degradation

Electron-transfer properties, as great contributors for electrocatalytic oxidation on the anode, are crucial to pollution degradation. The strong relationship between electron-transfer properties and active species (such as radicals) generation of anode catalysts suggests a new strategy for pollution-degradation efficiency improvement. In this study, a novel composite of Cu3(hexaamino triphenylhexane)2 [Cu3(HITP)2] and reduced graphene oxide (RGO) was synthesized to construct electron-transfer pathways between the two layers. Benefiting from the connection formed through RGO-O-N-Cu, the electron transfer from RGO to Cu3(HITP)2 was accelerated. The resettled charge distribution led the C atoms in the RGO layer, and the Cu and C atoms in Cu3(HITP)2 layer acted as the main surface active sites. O2•-, 1O2, and reactive chlorine were then triggered to boost the degradation of acetaminophen. The source of O2•- and 1O2 was more likely from surface oxygen groups rather than dissolved O2. Overall, this research provided a perspective proof of conductive Cu3(HITP)2/RGO composite construction with 2D/2D structure for electrocatalytic-oxidation improvement.

An optimization strategy for photo-Fenton-like catalysts: Based on crystal plane engineering of BiVO4 and electron transfer properties of 0D CQDs

Herein, we report a novel Cu₂(OH)₃ F/CQDs-BiVO₄ composite photo-Fenton-like system, which used BiVO₄ and Cu₂(OH)₃F as electron donor and acceptor, respectively, and achieved efficient electron transfer between them through the electron bridging effect of Carbon quantum dots (CQDs). The material exhibited excellent ciprofloxacin (CIP) removal efficiency in the photo-Fenton-like coupled system. Cu₂(OH)₃ F/CQDs-BiVO₄ had an incredibly fast response rate, eliminating 98.1% of CIP from the solution in just 1 h, according to the reaction kinetics. Exploratory tests proved that the catalyst kept up a sufficient level of activity across a wide pH range of 3-11 and in the presence of various anions. The activity, morphology, and crystal structure of the samples did not appreciably alter after five recycles. Finally, a possible reaction mechanism was also proposed based on the band structure, position and reaction species.

Visible-light-driven iron-based heterogeneous photo-Fenton catalysts for wastewater decontamination: A review of recent advances

Visible-light-driven heterogeneous photo-Fenton process has emerged as the most promising Fenton-derived technology for wastewater decontamination, owing to its prominent superiorities including the potential utilization of clean energy (solar light), and acceleration of ≡Fe(II)/≡Fe(III) dynamic cycle. As the core constituent, catalysts play a pivotal role in the photocatalytic activation of H₂O₂ to yield reactive oxidative species (ROS). To date, all types of iron-based heterogeneous photo-Fenton catalysts (Fe-HPFCs) have been extensively reported by the scientific community, and exhibited satisfactory catalytic performance towards pollutants decomposition, sometimes even exceeding the homogeneous counterparts (Fe(II)/H₂O₂). However, the relevant reviews on Fe-HPFCs, especially from the viewpoint of catalyst-self design are extremely limited. Therefore, this state-of-the-art review focuses on the available Fe-HPFCs in literatures, and gives their classification based on their self-characteristics and modification strategies for the first time. Two classes of representative Fe-HPFCs, conventional inorganic semiconductors of Fe-containing minerals and newly emerging Fe-based metal-organic frameworks (Fe-MOFs) are comprehensively summarized. Moreover, three universal strategies including (i) transition metal (TMs) doping, (ii) construction of heterojunctions with other semiconductors or plasmonic materials, and (iii) combination with supporters were proposed to tackle their inherent defects, viz., inferior light-harvesting capacity, fast recombination of photogenerated carriers, slow mass transfer and low exposure and uneven dispersion of active sites. Lastly, a critical emphasis was also made on the challenges and prospects of Fe-HPFCs in wastewater treatment, providing valuable guidance to researchers for the reasonable construction of high-performance Fe-HPFCs.

Abatement of paraquat contaminated water using solar assisted heterogeneous photo-Fenton like treatment with iron-containing industrial wastes as catalysts

Owing to the tremendous increase of chemicals for agricultural practices, the quality of water has degraded significantly and requires inevitable attention. With this in mind, present work aims at treating Paraquat (PQ) contaminated water using Fe containing industrial waste as a catalyst via photo-Fenton treatment. Utilizing the industrially generated Fe rich waste by-products i.e., Fly ash (FA), Foundry sand (FS), Red mud (RM), and Blast sand (BS) as catalysts marks the novelty of the work since this idea of using waste for treating waste serves the dual purpose of environment remediation:first by treating wastewater and second by resolving the issue of solid waste disposal. In the present study, 25 mg/L PQ was subjected to both UV and solar radiations in the presence of FeSO₄, FA, FS, RM, and BS as catalysts. The presence of Fe in the catalysts was verified using analytical techniques namely FTIR, FESEM-EDX, and their XRD was also analyzed. The system was further optimized for various parameters and results indicated maximum PQ degradation under UV radiations was attained in the order FeSO₄ (73%) > BS (65%) > FS (46%) > RM (37%) > FA (14%) within 60 min which significantly increased with introduction of solar radiations to 83% for Fe salt and 76% for BS justifying the potential of using waste for treating waste. Further, to enhance the real-life utilization of industrial waste, Fe₂O₃/BS heterojunction (Fe-BS) was synthesized which along with leading to 88% degradation of PQ, also showed 82% COD removal indicating that the catalyst not only degrades the pollutant but also converts it into a lower toxic form. Further, the intermediates formed during the process were analyzed using LCMS.

Enhanced Photo-Assisted Fenton Degradation of Antibiotics over Iron-Doped Bi-Rich Bismuth Oxybromide Photocatalyst

Herein, combining photocatalysis and Fenton oxidation, a photo-assisted Fenton system was conducted using Fe-doped Bi₄O₅Br₂ as a highly efficient photocatalyst to realize the complete degradation of Tetracycline antibiotics under visible light. It has been observed that the optimized photocatalyst 5%Fe-doped Bi₄O₅Br₂ exhibits a degradation efficiency of 100% for Tetracycline with H₂O₂ after 3 h visible-light irradiation, while a degradation percentage of 59.8% over the same photocatalyst and 46.6% over pure Bi₄O₅Br₂ were obtained without the addition of H₂O₂ (non-Fenton process). It is unambiguous that a boost photo-assisted Fenton system for the degradation of Tetracycline has been established. Based on structural analysis, it demonstrated that the Fe atoms in place of the Bi sites may result in the distortion of the local structure, which induced the occurrence of the spontaneous polarization and thus enhanced the built-in electric field. The charge separation efficiency is enhanced, and the recombination of electrons and holes is inhabited so that more charges are generated to reach the surface of the photocatalyst and therefore improve the photocatalytic degradation efficiency. Moreover, more Fe (II) sites formed on the 5%Fe-Bi₄O₅Br₂ photocatalyst and facilitated the activation of H₂O₂ to form oxidative species, which greatly enhanced the degradation efficiency of Tetracycline.

Recent Progress of Diatomic Catalysts: General Design Fundamentals and Diversified Catalytic Applications

In recent years, some experiments and theoretical work have pointed out that diatomic catalysts not only retain the advantages of monoatomic catalysts, but also introduce a variety of interactions, which exceed the theoretical limit of catalytic performance and can be applied to many catalytic fields. Here, the interaction between adjacent metal atoms in diatomic catalysts is elaborated: synergistic effect, spacing enhancement effect (geometric effect), and electronic effect. With regard to the classification and characterization of various new diatomic catalysts, diatomic catalysts are classified into four categories: heteronuclear/homonuclear, with/without carbon carriers, and their characterization measures are introduced and explained in detail. In the aspect of preparation of diatomic catalysts, the widely used atomic layer deposition method, metal-organic framework derivative method, and simple ball milling method are introduced, with emphasis on the formation mechanism of diatomic catalysts. Finally, the effective control strategies of four diatomic catalysts and the key applications of diatomic catalysts in electrocatalysis, photocatalysis, thermal catalysis, and other catalytic fields are given.

One-Step Carbonization Synthesis of Magnetic Biochar with 3D Network Structure and Its Application in Organic Pollutant Control

In this study, a magnetic biochar with a unique 3D network structure was synthesized by using a simple and controllable method. In brief, the microbial filamentous fungus Trichoderma reesei was used as a template, and Fe³⁺ was added to the culture process, which resulted in uniform recombination through the bio-assembly property of fungal hyphae. Finally, magnetic biochar (BMFH/Fe₃O₄) was synthesized by controlling different heating conditions in a high temperature process. The adsorption and Fenton-like catalytic performance of BMFH/Fe₃O₄ were investigated by using the synthetic dye malachite green (MG) and the antibiotic tetracycline hydrochloride (TH) as organic pollutant models. The results showed that the adsorption capacity of BMFH/Fe₃O₄ for MG and TH was 158.2 and 171.26 mg/g, respectively, which was higher than that of most biochar adsorbents, and the Fenton-like catalytic degradation effect of organic pollutants was also better than that of most catalysts. This study provides a magnetic biochar with excellent performance, but more importantly, the method used can be effective in further improving the performance of biochar for better control of organic pollutants.