EDTA-enhanced alkaline anaerobic fermentation of landfill leachate-derived waste activated sludge for short-chain fatty acids production: Metals chelation and EPSs destruction

A review on waste activated sludge pretreatment for improved volatile fatty acids production and their upcycling into polyhydroxyalkanoates

Waste activated sludge (WAS), a byproduct of wastewater treatment (WWTPs) facilities is challenging to manage because of its high organic content. Most of WAS is managed via anaerobic digestion (AD) to produce biogas, which is not deemed economically viable. The AD of WAS into volatile fatty acids (VFA) and their subsequent upcycling into polyhydroxyalkanoates (PHA) is gaining popularity due to their high value and uses. However, the fundamental issue with WAS is its low solubility, and pretreatment is required to increase it. Pretreatment disintegrates sludge floc and enhances its solubility, supports acetogens, and inhibits methanogens, leading to increased VFA synthesis in the AD process. The key factors influencing VFA yield include the size of the sludge granules, the mixing rate, and the presence of resistant organic components. Fermented broth containing VFA from AD can be utilized directly as a feedstock for microbial fermentation to produce PHA using both pure as well as mixed cultures. Utilisation of mixed cultures is useful since they are robust, able to consume a wide range of substrates, and do not require sterility. In addition, the VFA, which is made up of various organic acids, impacts the structure, productivity, characteristics, and type of PHA produced by microbial communities. Considering the importance of WAS management through VFA production and its integration with PHA production process this review article discusses the WAS pretreatment strategies, various factors that influence the AD process, trends in VFA to PHA production technologies with challenges, and possible solutions for integrated process development.

Weighted comprehensive risk assessment and pollution analysis of long-term printing and dyeing sludge landfills in an industrialized Chinese city

Sludge landfilling is widely used in China, accounting for approximately 65% of total sludge disposal, due to its simplicity and cost-effectiveness. However, with increasing land scarcity and stricter environmental regulations, the Chinese government has emphasized reducing sludge landfilling. Despite these efforts, sludge historically disposed of in landfills continues to pose risks, including heavy metal leaching and contamination of groundwater and soil. Comprehensive risk assessments for multi-contaminant industrial sludge in long-term landfills remain limited. This study conducted a risk survey and pollution assessment at a long-term sludge landfill in a typical industrial city in China. The sludge at the site was found to be mildly alkaline (pH 7.30-8.29) and had a low calorific value (1.37E+03-1.61E+03 kcal/kg), with significant dewatering challenges (1.23 × 1015 s2/g). The overall pollution load was relatively low, with a regional Pollution Load Index (PLI) of 0.65. However, due to extreme pollutants, the Nemerow Pollution Index (NPI) reached 9.49, indicating severe pollution. The single-factor index assessment indicates high pollution levels for Zn, Sb, BaP, and total petroleum hydrocarbons (TPHs). Ecological risk is primarily associated with Hg, Sb, BaP, InP, and TPHs. However, the weighted comprehensive risk assessment method proposed in the study identifies Zn, Pb, Sb, and TPHs as priority pollutants, with the main pollution hotspots being SZ4, SZ5, and SZ9. Some pollutants, such as Ni, antibiotics, polychlorinated biphenyls, and certain polycyclic aromatic hydrocarbons, were not detected in the sludge. Through principal component analysis and positive matrix factorization analysis, multiple sources of pollution at the landfill were identified, including the dyeing industry, electronics manufacturing, traffic emissions, fuel combustion, and urban runoff. This analysis highlights heavy metal pollution (Cr, Hg, Pb) and organic pollutants (PAHs, TPHs, DBA) resulting from industrial and urban activities. The results offer key insights to guide future sludge treatment and disposal at this landfill.

The enhancement of caproic acid synthesis from organic solid wastes: A review

Organic solid waste (OSW) significantly harms the environment and threatens human health. Producing caproic acid (CA) from OSW presents a cost-effective, sustainable, and resource-efficient solution. This study comprehensively examines the various methods for synthesizing CA from OSW, focusing on waste material selection, pretreatment processes to improve dissolution and hydrolysis of OSW, key substrates, and optimization strategies. Using OSW resources has been extensively studied and applied across numerous industries, presenting a promising solution for reducing environmental pollution. This study provides insights into CA synthesis pathways and substrate selection while emphasizing the optimization of CA production from OSW. It also highlights key areas for future research.

Influence of perfluorooctanoic acid on alkaline anaerobic fermentation of waste activated sludge: Perspective from volatile fatty acids production and sludge reduction

Alkaline anaerobic fermentation is an effective approach for resource utilization and reduction of waste activated sludge (WAS). Perfluorooctanoic acid (PFOA) is widespread in WAS, however, its potential impact on alkaline anaerobic fermentation of WAS remains largely unknown. Hence, this study focused on investigating the influence of PFOA on volatile fatty acids (VFAs) production and sludge reduction during alkaline anaerobic fermentation (pH = 10 ± 0.1), as well as the critical mechanisms. Results demonstrated that low PFOA concentration (5 mg/kg-TS) raised VFAs yield to 109.37%, while high levels of PFOA (25 and 50 mg/kg-TS) remarkably decreased VFAs production to 89.55% and 80.44% of the control. Mechanism exploration revealed that PFOA facilitated the solubilization process, and low PFOA level enhanced the accumulation of VFAs via increased bioavailable substrates and the activities of enzymes and microorganisms. On the contrary, high levels of PFOA were substantial biotoxicity, inducing excessive ROS production, causing oxidative damage, and reducing enzyme activity and functional microbial abundance, thereby decreasing VFAs production. Additionally, further analysis of sludge physicochemical properties confirmed that the effect of PFOA on WAS reduction exhibited the same trend as VFAs production. This work provides a basis for PFOA environmental risk assessment and WAS resource utilization.

Analysis of landfill leachate promoting efficient application of weathered coal anaerobic fermentation

This research aimed to develop a new method for clean utilization and treatment of landfill leachate and solid waste weathered coal. Landfill leachate and weathered coal were adopted for combined anaerobic fermentation for methane production. The characteristics of microbial community, mechanism of biological methane production, and utilization characteristics of fermentation broth and solid residue for co-fermentation were analyzed through metagenomics, soluble organic matter detection and thermogravimetric (TG) analysis. The obtained results revealed that combined anaerobic fermentation increased methane production by 80.1%. Syntrophomonas, Salipiger, Methanosaeta and Methanothrix were highly correlated. Gene abundances of 2-oxoacid ferredoxin oxidoreductase and enolase were increased in methane conversion pathway mainly by acetic acid. Pyruvate-ferroredoxin oxidoreductase, 2-oxoglutarate synthase and succinate dehydrogenase acetate synthase intensified electron transfer pathways among microorganisms. Fulvic acid, tyrosine and tryptophan contents were high in fermentation broth. Volatile decomposition temperature, ignition point and residual char combustion temperature of residual coal were decreased and combustion was more stable. The obtained results showed that the co-fermentation of landfill leachate and weathered coal improved biological methane gas production, degraded weathered coal and improved combustion performance, which provided a new idea for weathered coal clean utilization.

Contribution identification of hydrolyzed products of potassium ferrate on promoting short-chain fatty acids production from waste activated sludge

Potassium ferrate (K2FeO4) has been extensively employed to promote short-chain fatty acids (SCFAs) production from anaerobic fermentation of waste activated sludge (WAS) because of its potent oxidizing property and formation of alkaline hydrolyzed products (potassium hydroxide, KOH and ferric hydroxide, Fe(OH)3). However, whether K2FeO4 actually works as dual functions of both an oxidizing agent and an alkalinity enhancer during the anaerobic fermentation process remains uncertain. This study aims to identify the contributions of hydrolyzed products of K2FeO4 on SCFAs production. The results showed that K2FeO4 did not execute dual functions of oxidization and alkalinity in promoting SCFAs production. The accumulation of SCFAs using K2FeO4 treatment (183 mg COD/g volatile suspended solids, VSS) was less than that using either KOH (192 mg COD/g VSS) or KOH & Fe(OH)3 (210 mg COD/g VSS). The mechanism analysis indicated that the synergistic effects caused by oxidization and alkalinity properties of K2FeO4 did not happen on solubilization, hydrolysis, and acidogenesis stages, and the inhibition effect caused by K2FeO4 on methanogenesis stage at the initial phase was more severe than that of its hydrolyzed products. It was also noted that the inhibition effects of K2FeO4 and its hydrolyzed products on the methanogenesis stage could be relieved during a longer sludge retention time, and the final methane yields using KOH or KOH & Fe(OH)3 treatment were higher than that using K2FeO4, further confirming that dual functions of K2FeO4 were not obtained. Therefore, K2FeO4 may not be an alternative strategy for enhancing the production of SCFAs from WAS compared to its alkaline hydrolyzed products. Regarding the strong oxidization property of K2FeO4, more attention could be turned to the fates of refractory organics in the anaerobic fermentation of WAS.

Treatment of landfill leachate using photocatalytic based advanced oxidation process - a critical review

Landfill leachate is a discrete volumetric component of municipal solid waste; hence, researchers and professionals are more concerned about it because of its obscurity. Innovative treatment and emerging technologies are being scrutinized to address the treatment of landfill leachate challenges. The leading target of this review was to examine the possibility of removing recalcitrant organic pollutants from landfill leachate by photocatalytic-based advanced oxidation processes. A summary of the systematic applicability of conventional treatment for landfill leachate is provided, with a focus on physico-chemical and biological processes. The biological treatment, such as aerobic and anaerobic digestion, is an excellent technique for treating highly concentrated organic pollutants in the wastewater. However, Leachate can scarcely be treated using conventional techniques since it is enriched with refractory organics and inorganic ions. It is clear from the literature review that none of the available combinations of physico-chemical and biological treatments are entirely relevant for the removal of recalcitrant organic pollutants from leachate. Recently, the photo-assisted TiO2/ZnO oxidation has shown an excessively potential and feasible way to treat landfill leachate. TiO2/ZnO photocatalysis is currently developing to treat recalcitrant organic pollutants from landfill leachate. The effect of operating parameters reveals that pH and temperature affect the reaction rate. The addition of oxidant H2O2 to the TiO2/ZnO suspension suggests that TiO2 leads to an increase in the rate of reaction when compared to ZnO. Photocatalytic remediation technique of landfill leachate would support the goal of environmental sustainability by greatly enhancing the effectiveness of treated leachate reutilization. In this review, the selection of the best photocatalytic treatment for leachate based on its systematic relevance and potential conditions, characteristics, cost-effectiveness, essential controlling, discharge limit, long-term environmental effects, and its future study perspectives are emphasized and discussed.