Sustainable use of wastes as reactive material in permeable reactive barrier for remediation of acid mine drainage: Batch and continuous studies

Making waves: Breaking the bottleneck of recycling drinking water treatment residue for practical engineering applications in water pollution control

Drinking water treatment residue (DWTR), an inevitable byproduct of water treatment plants, is typically recycled to control water pollution. DWTR poses a low environmental risk and has the potential to function as a functional material for various applications. However, the practical engineering applications of DWTR are limited. These limitations arise from a disconnect between fundamental research and the practical needs of engineering applications, creating a bottleneck for the effective recycling of DWTR. Previous studies have primarily focused on exploring potential DWTR recycling methods that reuse Al, Fe, Mn, Ca, Si, and organic C. However, the varying properties of DWTR obtained from different water treatment plants tend to differ with respect to potential recycling methods, confusing managers and engineers in using relevant knowledge to guide practical engineering applications. To address this challenge, the author advocates for a shift in research toward establishing guidelines that provide direct guidance for practical engineering applications of DWTR. The key components of these guidelines should include risk assessment, capability evaluation, and environmental application procedures with sustainability assessment to break the bottleneck associated with the recycling of DWTR.

Effect of hydrochar-doping on the performance of carbon felt as anodic electrode in microbial fuel cells

In this study, the feasibility of using hydrochars as anodic doping materials in microbial fuel cells (MFCs) was investigated. The feedstock used for hydrochar synthesis was metal-polluted plant biomass from an abandoned mining site. The hydrochar obtained was activated by pyrolysis at 500 °C in N2 atmosphere. Under steady state conditions, the current exerted by the MFCs, as well as the cyclic voltammetry and polarization curves, showed that the activated hydrochar-doped anodes exhibited the best performance in terms of power and current density generation, 0.055 mW/cm2 and 0.15 mA/cm2, respectively. These values were approximately 30% higher than those achieved with non-doped or doped with non-activated hydrochar anodes which can be explained by the highly graphitic carbonaceous structures obtained during the hydrochar activation that reduced the internal resistance of the system. These results suggest that the activated hydrochar materials could significantly enhance the electrochemical performance of bioelectrochemical systems. Moreover, this integration will not only enhance the energy generated by MFCs, but also valorize metal polluted plant biomass within the frame of the circular economy.