Quantitative effect of adding percentages of anammox granules on the start-up process and microbial community analysis

Start-up of Anammox-HAP in IC reactors: Revelation of sludge characteristics and microbial community structure

The scarcity of seed sludge poses a significant barrier to the advancement of anaerobic ammonia oxidation (anammox) process. In this investigation, two alternative sludge (anaerobic granular sludge (AGS) and activated flocculent sludge (AFS)) were employed to start up the anammox process in internal circulation (IC) reactors with the hydroxyapatite (HAP) strategy. Both reactors achieved rapid start-up on days 83 and 53, respectively. Subsequently, a nitrogen removal rate (NRR) of 1.34 gN/L/d was attained at a nitrogen loading rate (NLR) of 1.39 gN/L/d on days 107 and 81 correspondingly. The analysis of granular properties revealed that the anammox granular sludge (AMXGS) transformed from AGS exhibited superior granular size distribution and settling performance. Furthermore, the assessment of microbial community structure demonstrated that inoculating AFS was capable of enriching anammox bacteria (AnAOB) in a shorter time. Last but most importantly, this study provides a comprehensive analysis of the distinct granulation routes of AGS and AFS. AGS predominantly underwent a "broken-adsorption-granulation" process, whereas AFS exhibited not only a typical "adsorption-granulation" process but also a "biofilm growth-granulation" cycle process. The findings of this study offer a novel approach for quickly initiating anammox process when inoculating alternative sludge.

Deciphering key microbes and their interactions within anaerobic ammonia oxidation systems

The stability of anaerobic ammonium oxidation (anammox) performance is inseparably linked to the dynamic equilibrium of microbial interactions. However, understanding of the key microbes within anammox systems remains limited. Through the analysis of 186 16S rRNA datasets combined with various ecological analysis methods, this study identified key microbes in the anammox process. Interactions between Candidatus_Kuenenia and other key microbes are the most significant with greater tolerance to differing water quality, while Candidatus_Jettenia have higher habitat specificity. Under adverse conditions, anammox bacteria can reduce the impact of unfavorable environments by enhancing interactions with certain microbes. This study comprehensively reviews the main functions of key microbes in the anammox system and their interactions, and summarizes several common interaction mechanisms, providing new insights for understanding the startup and stable operation of the anammox process.

Enhancement of the reactivation process of long-term starved anammox granular sludge with gravel balls: Microbial succession and metabolic impact

Anaerobic ammonium oxidation (Anammox) process is an economical and energy-efficient method of wastewater nitrogen removal. However, they are highly susceptible to starvation stress caused by sudden environmental changes. Rapid reactivation of starved anammox sludge is a crucial method to address seed sludge shortages and expand practical applications. This study investigated the impact of gravel balls on the reactivation of long-term starved anammox granular sludge (628 days). The results showed that gravel balls enhanced the recovery of nitrogen removal performance in starved anammox sludge, with nitrogen removal efficiency being 19.88% higher than the control group at the end of the recovery phase. The gravel balls also increased extracellular polymeric substance (EPS) secretion, contributing to the stability of the anammox system. Furthermore, the gravel balls promoted the proliferation of anammox bacteria, with the relative abundance of anammox bacteria reaching 38.25% on the 80th day. The analyses of microbial functions indicated that gravel balls facilitated cross-feeding and co-metabolism among microbes, while enhancing quorum sensing associated with anammox bacteria, forming a multifunctional community network centered on anammox bacteria. This indicates that gravel balls can effectively accelerate the reactivation process of long-term starved anammox sludge, aiding the reutilization of long-term starved anammox sludge.

Starvation resilience in anammox-based bioreactors: A stable nitrogen removal route on partial denitrification/anammox (PD/A)

This study investigates the performance, resilience and microbial community dynamics of two anaerobic processes, i.e. pure anammox (R1) and partial denitrification/anammox (PD/A) (R2), following a 30-day starvation period. The tolerance to starvation was assessed by comparing nitrogen removal efficiency and microbial activity across both reactors. Results show that the PD/A process recovery to pre-starvation performance levels within just one day, as compared to the pure anammox process. Notably, although the activity of anammox bacteria decreased in both processes during starvation, the decay rate in R1 was 69.59 % higher than in R2, potentially explaining the quicker recovery of R2. Furthermore, enhanced secretion of extracellular polymeric substance (EPS) during starvation served as a protective mechanism. The potential functions and genes in microorganisms, as well as the pathway of nitrogen cycling, were demonstrated through analyses using the KEGG database. This research reveals essential mechanistic insights and strategic guidance for the effective implementation of anammox-based biological nitrogen removal processes.

Enhanced-nitrogen removal through Fe(III)-triggered partial dissimilatory nitrate reduction to ammonium coupling with anammox in anammox bioreactor

Anammox is recognized as a prospective alternative for future biological nitrogen removal technologies. However, the nitrate by-products produced by anammox bacteria limit its overall nitrogen removal efficiency below 88 %. This study introduced Fe(III) into the anammox bioreactor to enhance the nitrogen removal efficiency to approximately 95 %, surpassing the biochemical limit of 88 % imposed by anammox stoichiometry. Anammox sludge was demonstrated to utilize extracellular polymeric substances to reduce Fe(III) into Fe(II), and this process promoted the dominance of Ca. Brocadia. The iron addition improved the abundance of narGHI genes and facilitated the partial dissimilatory nitrate reduction to ammonium, with nitrite as the end product. The accumulated nitrite was then eliminated through the anammox pathway, along with the excess ammonium (30 mg/L) in the influent. Overall, this study deepens our understanding of the enhanced nitrogen removal triggered by Fe(III) in anammox sludge and offers an effective approach to boost anammox process.

Recent advances in swine wastewater treatment technologies for resource recovery: A comprehensive review

Swine wastewater (SW), characterized by highly complex organic and nutrient substances, poses serious impacts on aquatic environment and public health. Furthermore, SW harbors valuable resources that possess substantial economic potential. As such, SW treatment technologies place increased emphasis on resource recycling, while progressively advancing towards energy saving, sustainability, and circular economy principles. This review comprehensively encapsulates the state-of-the-art knowledge for treating SW, including conventional (i.e., constructed wetlands, air stripping and aerobic system) and resource-utilization-based (i.e., anaerobic digestion, membrane separation, anaerobic ammonium oxidation, microbial fuel cells, and microalgal-based system) technologies. Furthermore, this research also elaborates the key factors influencing the SW treatment performance, such as pH, temperature, dissolved oxygen, hydraulic retention time and organic loading rate. The potentials for reutilizing energy, biomass and digestate produced during the SW treatment processes are also summarized. Moreover, the obstacles associated with full-scale implementation, long-term treatment, energy-efficient design, and nutrient recovery of various resource-utilization-based SW treatment technologies are emphasized. In addition, future research prospective, such as prioritization of process optimization, in-depth exploration of microbial mechanisms, enhancement of energy conversion efficiency, and integration of diverse technologies, are highlighted to expand engineering applications and establish a sustainable SW treatment system.

Rapid establishment of municipal sewage partial denitrification-anammox for nitrogen removal through inoculation with side-stream anammox biofilm without domestication

Mainstream partial denitrification anammox was achieved through inoculation of side-stream mature partial nitritation anammox biofilm without domestication. The contribution of anammox to nitrogen removal was 29.4 %. Moreover, prolonging anoxic hydraulic retention time and introducing side-stream nitrite under different carbon/nitrogen ratios enriched anammox bacteria. The abundance of anammox bacteria increased by ∼ 10 times ((2.19 ± 0.17) × 1012 copies gene / g dry sludge) with a total relative abundance of 18.51 %. During 258 days of operation, the contribution of anammox to nitrogen removal gradually increased to 68.8 %. The total nitrogen in the effluent decreased to 8.84 mg/L with a total nitrogen removal efficiency of 76.4 % under a carbon/nitrogen ratio of 3. This paper proposes a novel way to rapidly achieve mainstream partial denitrification anammox via inoculation with side-stream mature partial nitritation anammox biofilm. This method achieves advanced nitrogen removal from municipal wastewater, even under low carbon/nitrogen ratios.

Innovative determination of the specific anammox activity for anammox sludge from continuous flow reactors: A comparison between continuous flow test and batch test

A novel method for measuring specific anammox activity (SAA) was proposed based on continuous flow tests to accurately determine the SAA of anammox sludge from continuous flow reactors, resolving the challenges of inaccurate SAA assessment caused by substrate shock to anammox bacteria. Results showed SAA of expanded granular sludge bed sludge via batch tests (0.101 ± 0.018 g-N·g-VSS-1·d-1) was lower than continuous flow tests (0.206 ± 0.010 g-N·g-VSS-1·d-1) (p < 0.05), highlighting the impact of substrate shock. Conversely, SAA of sequencing batch reactor sludge assessed via batch tests (0.878 ± 0.008 g-N·g-VSS-1·d-1) was higher than continuous flow tests (0.809 ± 0.005 g-N·g-VSS-1·d-1) (p < 0.01), attributed to endogenous denitrification. The advantages of continuous flow tests over batch tests included milder feeding way, stricter anaerobic conditions, and minimal sampling impact on system. Our study contributes to more accurate measurements of SAA of anammox sludge from continuous flow reactors, favoring long-term robust operation of anammox reactors.