Simultaneous determination of 210Pb and 210Po in seafood samples using liquid scintillation counting

Lead-210 in environmental samples -a review on the status and progress on its determination

Lead-210 (210Pb) is an integral component of the uranium-238 decay series and distributed throughout the environment. The interest for determining 210Pb comes from many tracer applications of the radionuclide, where one of the most useful applications is sediment dating. Meanwhile, the radiation risk through internal exposure is another concern due to its high radiotoxic daughters. The conventional approaches for 210Pb quantification have relied upon radiometric methods, an interest in using mass spectrometry for its measurement has been increased in the recent years. This article aims to present a critical review on different aspects for the determination of 210Pb, including preconcentration and separation of lead from environmental samples, followed by a comparison of the conventional radiometric methods to the mass spectrometry for its measurement.

Determination of 90Sr and 210Pb in food samples by liquid scintillation counting after sequential separation with an extraction chromatographic column

90Sr and 210Pb are considered to be key radionuclides in internal exposure resulting from dietary intake, however, the established methods employed for their detection are time-comsuming. A method for the sequential separation of 90Sr and 210Pb using a Sr·spec resin by LSC measurement is developed, which is highly suitable for food safety monitoring as its minimal sample requirements. The sequential separation of Sr and Pb from the sample was using 0.05 mol/L HNO3 and 0.05 mol/L C6H5O7(NH4)3. The chemical recoveries of Sr and Pb measured using ICP-OES were 72-83% and 80-88%, respectively. The minimum detectable activities of 90Sr and 210Pb in the food sample were 36.2 mBq/kg and 28.6 mBq/kg, respectively, obtained from a 0.1 kg fresh sample and 300 min counting time. The method was validated using reference materials and compared with other methods. The feasibility of the developed method for other highly complex food matrices needs further investigation.

Recent progresses in analytical method development for 210Pb in environmental and biological samples

As a decay product of uranium series, 210Pb spreads widely in the nature and imposes strong radiological and chemical toxicity. It is vital to establish reliable and efficient radioanalytical methods for 210Pb determination to support environment and food radioactivity monitoring programs. This article critically reviews analytical methods developed for determining 210Pb in environmental and biological samples, especially new development in recent years. Techniques applied throughout different analytical steps including sample pretreatment, separation, purification, and detection are summarized and their pros and cons are discussed to provide a holistic overview for 210Pb environmental and biological assay.

Simultaneous determination of 226Ra and 228Ra in food samples using liquid scintillation counting

The 228Ra and 226Ra isotopes of radium are significant contaminants in food, raising public concern because of their radiotoxicity. Several methods are available for determining 228Ra and 226Ra. However, the application of these procedures is not focused on food but only on water and environmental matrices. In this study, a cost-effective method for the simultaneous determination of 226Ra and 228Ra radioactivity in food samples using liquid scintillation counting was developed. The overall efficiencies of 226Ra and 228Ra in the food samples are 69.4-78.4% and 30.1-35.8%, respectively. The minimum detectable activities of 226Ra and 228Ra are 11.3 mBq/g and 33.4 mBq/g, respectively, in our food sample, obtained using a 1.0 g ash sample and 60 min of counting time. The method was validated using IAEA-certified reference materials and compared with data obtained using gamma spectrometry in tea, kelp, and oyster samples.

A sensitive method to determine 210Po and 210Pb in environmental samples by alpha spectrometry using CuS micro-precipitation

A new sensitive method to determine polonium-210 (210Po) and lead-210 (210Pb) in a diversity of environmental samples was developed. For fresh and marine waters, Po was pre-concentrated using a titanium (III) hydroxide (Ti(OH)3) co-precipitation. Solid environmental samples were digested with nitric acid (HNO3) and hydrogen peroxide (H2O2). The alpha thin layer source was prepared using CuS micro-precipitation and 210Po was measured by alpha spectrometry. Lead-210 was left to decay for up to a year and indirectly measured via its progeny, 210Po. The chemical recoveries for 210Po and 210Pb were high, 90% and 97%, respectively, for a large variety of samples and a very low minimum detectable activity (MDA) was obtained. The method was validated using standardized solutions and certified reference materials.

Detection of Polonium-210 in Environmental, Biological and Food Samples: A Review

Ingestion of polonium-210 from environmental media and food can cause serious health hazards (e.g., gastrointestinal symptoms, tumours, etc.) and has been a public health concern worldwide since the 2006 poisoning of Agent Litvinenko 210Po in Russia. With the development of uranium mining and applications of nuclear technology in recent decades, the radioactive hazards posed by 210Po to living organisms and the environment have become increasingly prominent. In order to strengthen the monitoring of environmental 210Po and protect both the environment and human health, a series of explorations on the methods of 210Po determination have been ongoing by researchers across the globe. However, previous reviews have focused on individual sample types and have not provided a comprehensive account of environmental, food, and biological samples that are closely related to human health. In this work, the sources, health hazards, chemical purification, and detection methods of trace 210Po in different sample types are systematically reviewed. In particular, the advantages and disadvantages of various pretreatment methods are compared, and relevant domestic and international standards are integrated, which puts forward a new direction for the subsequent establishment of rapid, simple, and efficient measurement methods.

Simultaneous determination of 210Pb and 90Sr and 210Po isolation in sludge samples using a plastic scintillation resin

This study describes a new and fast method for separating ²¹⁰Po from ²¹⁰Pb and ⁹⁰Sr, before simultaneously measuring the individual activities of the latter two radionuclides using a plastic scintillation resin (PSresin) in sludge samples taken from a drinking water treatment plant. This method speeds up the analysis process significantly by simultaneously measuring ²¹⁰Pb and ⁹⁰Sr in a single step. The method is reproducible and has a relative standard deviation of less than 25% for ²¹⁰Pb, ²¹⁰Po and ⁹⁰Sr. The method was satisfactorily validated with an intercomparison sample and applied to sludge samples from a drinking water treatment plant. The minimum detectable activities for 0.9 g of sludge are 5.5 Bq/kg and 8 Bq/kg for ²¹⁰Pb and ⁹⁰Sr respectively when measured for 180 min, and 0.5 Bq/kg for ²¹⁰Po when measured for 5000 min.

A fast strategy to sequentially separate and determine 90Sr, 210Pb and 210Po in water samples using Sr resin

This study presents a rapid and novel sequential separation strategy based on extraction chromatography for determining 90Sr, 210Pb and 210Po in drinking water samples. It involves the use of Sr resin for the separation and then liquid scintillation counting and alpha spectrometry for the determination. The experimental results obtained showed that the proper acidic solution to quantitatively retain the aforementioned radionuclides is 3 M HNO3. The optimum eluents were determined for obtaining quantitative recoveries (70–80%) of 90Sr, 210Pb and 210Po. The method was validated with intercomparison water samples and is satisfactory in terms of minimum detectable activities, which are 50% lower than that established in RD 314/2016.

Levels and Distributions of 210Pb and 210Po in Selected Seafood Samples in China and Assessment of Related Dose to Population

In this study, the activity concentrations levels of 210Pb and 210Po in the edible portions of eight seafood samples collected from the Fujian coast of China were determined. The activity concentrations ranged from 0.74 ± 0.08 to 12.6 ± 1.0 Bq/kg for 210Po and from the minimum detectable limit (MDL, 0.80 Bq/kg) to 11. 7 ± 1.1 Bq/kg for 210Pb. The 210Po activity concentration in all the fish organs ranged from 0.68 to 204 Bq/kg (w.w.), and the 210Po activity was mainly concentrated in the stomach, spleen, heart, liver, gonad, and intestine samples. The 210Pb activity concentration in all the fish organs ranged from the MDL to 15.2 Bq/kg (w.w.), and the 210Pb activity was concentrated in the head, fish scale, and gill samples. The annual effective ingestion doses ranged from 82.8 to 255 μSv/a for all age groups, and the lifetime risk of cancers were estimated. Both the effective ingestion doses and cancer risk to humans were within the acceptable ranges.