Overestimate of remediation efficiency due to residual sodium persulfate in PAHs contaminated soil and a solution

Monitoring of in-situ chemical oxidation for remediation of diesel-contaminated soil with electrical resistivity tomography

In-situ chemical oxidation (ISCO) with persulfate, an electrically conductive oxidant, provides a powerful signal for noninvasive geophysical techniques to characterize the remediation process of hydrocarbon contaminants. In this study, remediation with ISCO is conducted in laboratory sandboxes to evaluate the ability of electrical resistivity tomography (ERT) for monitoring the base-activated persulfate remediation process of diesel-contaminated soil. It was found that the resistivity of contaminated sand significantly decreased from 846 Ω·m to below 10 Ω·m after persulfate injection, and all measured chemical parameters showed a noticeable increase. Natural degradation and contamination plume migration were not evident in a reference sandbox without treatment. The area with a resistivity ratio < 0.95 based on imaging before and after injection indicated downward migration of the oxidation plume due to density-driven flow. A comparison between remediation and reference sandboxes showed that the observed resistivity decrease can be due to both contaminant degradation as well as the oxidation plume itself in the contaminated source zone. In contrast, the resistivity decrease in the area with low contamination concentration is attributed to the oxidation plume alone. The derived relationships between resistivity and contaminant indicators further emphasize that the contribution of contaminant consumption to resistivity change in the source area is 25.6%, while it is <16% in the low or non-contaminated area. Although this study showed that resistivity is not solely affected by the chemical transformation of diesel components, it can be combined with sampling data to allow an assessment of the effectiveness of ISCO treatment and to identify target areas for subsequent treatment.

Remediation of industrial site soil contaminated with PAHs using stage persulfate oxidation activated by Fe2+ chelated with sodium citrate

The remediation for industrial site soil has attracted public concerns because of the hazardous and hydrophobic properties of organic pollutants existed in the soil. The persulfate oxidation activated by Fe²⁺ chelated with sodium citrate (PS/Fe²⁺/SC) was used to remediate different types of industrial site soils in the present study. The maximum removal rates of Σ16 PAHs in the Nanjing site soil (NJS) and Hefei site soil (HFS) were 73.6% and 85.8% after the second-stage oxidation, respectively. The late oxidation stages couldn't enhance the degradation efficiency of PAHs due to the increase of high crystalline Fe mineral phases both in the NJS and HFS, which significantly decreased the Fe²⁺/Fe³⁺ recycle and further inhibited the reactive oxygen species production during the remediation. The remediation using PS/Fe²⁺/SC could change the soil physicochemical properties, such as the functional groups, specific surface area (SSA), total pore volume (TPV) and some UV spectral parameters of soil particles. Additionally, the oxidation of PS/Fe²⁺/SC also altered the composition of soil dissolve organic matters, especially the fulvic acid, which further affected the Fe²⁺ oxidation. The study mainly discloses the mechanism of limitation using persulfate oxidation activated by Fe materials at late oxidation stage.

Decrypting the synergistic action of the Fenton process and biochar addition for sustainable remediation of real technogenic soil from PAHs and heavy metals

The objective of this study was to demonstrate the feasibility and the relevance of combining biochar with the Fenton process for the simultaneous improvement of polycyclic aromatic hydrocarbons (PAHs) degradation and immobilization of heavy metals (HMs) in real soil remediation processes at circumneutral pH. The evaluation of PAHs degradation results was performed through multivariate statistical tools, including principal component analysis (PCA) and partial least squares (PLS). PCA showed that the level of biochar amendment decisively affected the degree of degradation of total PAHs, highlighting the role of biochar in catalyzing the Fenton reaction. Moreover, the PLS model was used to interpret the important features of each PAH's physico-chemical properties and its correlation to degradation efficiency. The electron affinity of PAHs correlated positively with the degradation efficiency only if the level of biochar amendment sat at 5%, explained by the ability of biochar to transfer the electrons to PAHs, improving the Fenton-like degradation. Moreover, the addition of biochar reduced the mobilization of HMs by their fixation on their surface, reducing the Fenton-induced metal leaching from the destruction of metal-organic complexes. In overall, these results on the high immobilization rate of HMs accompanied with additional moderate PAHs degradation highlighted the advantages of using a biochar-assisted Fenton-like reaction for sustainable remediation of technogenic soil.