Enhanced activity of ZnS (111) by N/Cu co-doping: Accelerated degradation of organic pollutants under visible light

Removal of sulfonylurea herbicides with g-C3N4-based photocatalysts: A review

The accumulation of agricultural chemicals in the environment has become a global concern, of which sulfonylurea herbicides (SUHs) constitute a significant category. Solar-driven photocatalysis is favored for removing organic pollutants due to its high efficiency and environmental friendliness. Graphite carbon nitride (g-C3N4)-based materials with superior catalytic activities and physicochemical stabilities are promising photocatalysts. This review describes the g-C3N4-based materials and their uses in the photocatalytic degradation of SUHs or other organic pollutants with similar structures. First, the fundamentals of g-C3N4-based materials and photocatalytic SUHs degradation are discussed to provide an in-depth understanding of the mechanism for the photocatalytic activity. The ability of different g-C3N4-based materials to photocatalytically degrade SUH-like structures is then discussed and summarized based on different modification strategies (morphology modulation, elemental doping, defect engineering, and heterojunction formations). Meanwhile, the effects of different environmental factors on the photocatalytic performance of g-C3N4-based materials are described. Finally, the major challenges and opportunities of g-C3N4-based materials for the photocatalytic degradation of SUHs are proposed. It is hoped that this review will show the feasibility of photocatalytic degradation of SUHs with g-C3N4-based materials.

Facile Synthesis of Cu-Doped ZnO Nanoparticles for the Enhanced Photocatalytic Disinfection of Bacteria and Fungi

In this study, Cu-doped ZnO was prepared via the facile one-pot solvothermal approach. The structure and composition of the synthesized samples were characterized by XRD (X-ray diffraction), TEM (transmission electron microscopy), and XPS (X-ray photoelectron spectroscopy) analyses, revealing that the synthesized samples consisted of Cu-doped ZnO nanoparticles. Ultraviolet-visible (UV-vis) spectroscopy analysis showed that Cu-doping significantly improves the visible light absorption properties of ZnO. The photocatalytic capacity of the synthesized samples was tested via the disinfection of Escherichia coli, with the Cu-ZnO presenting enhanced disinfection compared to pure ZnO. Of the synthesized materials, 7% Cu-ZnO exhibited the best photocatalytic performance, for which the size was ~9 nm. The photocurrent density of the 7% Cu-ZnO samples was also significantly higher than that of pure ZnO. The antifungal activity for 7% Cu-ZnO was also tested on the pathogenic fungi of Fusarium graminearum. The macroconidia of F. graminearum was treated with 7% Cu-ZnO photocatalyst for 5 h, resulting in a three order of magnitude reduction at a concentration of 105 CFU/mL. Fluorescence staining tests were used to verify the survival of macroconidia before and after photocatalytic treatment. ICP-MS was used to confirm that Cu-ZnO met national standards for cu ion precipitation, indicating that Cu-ZnO are environmentally friendly materials.

Direct Z-Scheme Heterojunction α-MnO2/BiOI with Oxygen-Rich Vacancies Enhanced Photoelectrocatalytic Degradation of Organic Pollutants under Visible Light

The degradation efficiency of photoelectrocatalytic (PEC) processes for the removal of organic pollutants is highly dependent on the performance of the photoelectroanode catalyst. The design of PEC systems with a direct Z-scheme charge transfer mechanism and visible light excitation is essential to enhance the degradation efficiency of organic compounds. Here, a α-MnO2/BiOI direct Z-scheme heterojunction photocatalyst was successfully synthesized through a convenient and feasible method. It is remarkable that the photoanode exhibited excellent PEC performance under visible light irradiation; a 95% removal rate of tetracycline (TC) pollutants was achieved within 2 h, and it had excellent stability and reusability, which was expected to degrade antibiotics efficiently and environmentally in harsh environments. The presence of oxygen vacancies (OVs) in the α-MnO2/BiOI heterojunction was confirmed by electron spin resonance technique, and the OVs acted as electron traps that contributed substantially to the separation efficiency of photogenerated carriers. ESR characterization showed that the main reactive radicals during TC degradation were –OH and –O2−. By analyzing the intermediates, the possible degradation pathways of TC were further analyzed and a suitable degradation mechanism was proposed. The toxicity changes in the degradation process were explored by evaluating the toxicity of the intermediates. This study provides a new way to enhance the performance of Bi-based semiconductor photocatalysts for the effective degradation of TC in water.

CuS-Based Nanostructures as Catalysts for Organic Pollutants Photodegradation

The direct or indirect discharge of toxic and non-biodegradable organic pollutants into water represents a huge threat that affects human health and the environment. Therefore, the treatment of wastewater, using sustainable technologies, is absolutely necessary for reusability. Photocatalysis is considered one of the most innovative advanced techniques used for pollutant removal from wastewater, due to its high efficiency, ease of process, low-cost, and the environmentally friendly secondary compounds that occur. The key of photocatalysis technology is the careful selection of catalysts, usually semiconductor materials with high absorption capacity for solar light, and conductivity for photogenerated charge carriers. Among copper sulfides, CuS (covellite), a semiconductor with different morphologies and bandgap values, is recognized as an important photocatalyst used for the removal of organic pollutants (dyes, pesticides, pharmaceutics etc.) from wastewater. This review deals with recent developments in organic pollutant photodegradation, using as catalysts various CuS nanostructures, consisting of CuS NPs, CuS QDs, and heterojunctions (CuS/ carbon-based materials, CuS/organic semiconductor, CuS/metal oxide). The effects of different synthesis parameters (Cu:S molar ratios, surfactant concentration etc.) and properties (particle size, morphology, bandgap energy, and surface properties) on the photocatalytic performance of CuS-based catalysts for the degradation of various organic pollutants are extensively discussed.