Comparison of the Virucidal Effects of Disinfectant Agents Against Equine Influenza A Virus

Antiviral Characterization of Advanced Materials: Use of Bacteriophage Phi 6 as Surrogate of Enveloped Viruses Such as SARS-CoV-2

The bacteriophage phi 6 is a virus that belongs to a different Baltimore group than SARS-CoV-2 (group III instead of IV). However, it has a round-like shape and a lipid envelope like SARS-CoV-2, which render it very useful to be used as a surrogate of this infectious pathogen for biosafety reasons. Thus, recent antiviral studies have demonstrated that antiviral materials such as calcium alginate hydrogels, polyester-based fabrics coated with benzalkonium chloride (BAK), polyethylene terephthalate (PET) coated with BAK and polyester-based fabrics coated with cranberry extracts or solidified hand soap produce similar log reductions in viral titers of both types of enveloped viruses after similar viral contact times. Therefore, researchers with no access to biosafety level 3 facilities can perform antiviral tests of a broad range of biomaterials, composites, nanomaterials, nanocomposites, coatings and compounds against the bacteriophage phi 6 as a biosafe viral model of SARS-CoV-2. In fact, this bacteriophage has been used as a surrogate of SARS-CoV-2 to test a broad range of antiviral materials and compounds of different chemical natures (polymers, metals, alloys, ceramics, composites, etc.) and forms (films, coatings, nanomaterials, extracts, porous supports produced by additive manufacturing, etc.) during the current pandemic. Furthermore, this biosafe viral model has also been used as a surrogate of SARS-CoV-2 and other highly pathogenic enveloped viruses such as Ebola and influenza in a wide range of biotechnological applications.

Impeding the Medical Protective Clothing Contamination by a Spray Coating of Trifunctional Polymers

The risk of fomite-mediated transmission in the clinic is substantially increasing amid the recent COVID-19 pandemic as personal protective equipment (PPE) of hospital workers is easily contaminated by direct contact with infected patients. In this context, it is crucial to devise a means to reduce such transmission. Herein, we report an antimicrobial, antiviral, and antibiofouling trifunctional polymer that can be easily coated onto the surface of medical protective clothing to effectively prevent pathogen contamination on the PPE. The coating layer is formed on the surfaces of PPE by the simple spray coating of an aqueous solution of the trifunctional polymer, poly(dodecyl methacrylate (DMA)-poly(ethylene glycol) methacrylate (PEGMA)-quaternary ammonium (QA)). To establish an optimal ratio of antifouling and antimicrobial functional groups, we performed antifouling, antibacterial, and antiviral tests using four different ratios of the polymers. Antifouling and bactericidal results were assessed using Staphylococcus aureus, a typical pathogenic bacterium that induces an upper respiratory infection. Regardless of the molar ratio, polymer-coated PPE surfaces showed considerable antiadhesion (∼65-75%) and antibacterial (∼75-87%) efficacies soon after being in contact with pathogens and maintained their capability for at least 24 h, which is sufficient for disposable PPEs. Further antiviral tests using coronaviruses showed favorable results with PPE coated at two specific ratios (3.5:6:0.5 and 3.5:5.5:1) of poly(DMA-PEGMA-QA). Moreover, biocompatibility assessments using the two most effective polymer ratios showed no recognizable local or systemic inflammatory responses in mice, suggesting the potential of this polymer for immediate use in the field.

Controlled Release of Molecular Intercalants from Two-Dimensional Nanosheet Films

Solution co-deposition of two-dimensional (2D) nanosheets with chemical solutes yields nanosheet-molecular heterostructures. A feature of these macroscopic layered hybrids is their ability to release the intercalated molecular agent to express chemical functionality on their surfaces or in their near surroundings. Systematic design methods are needed to control this molecular release to match the demand for rate and lifetime in specific applications. We hypothesize that release kinetics are controlled by transport processes within the layered solids, which primarily involve confined molecular diffusion through nanochannels formed by intersheet van der Waals gaps. Here a variety of graphene oxide (GO)/molecular hybrids are fabricated and subject to transient experiments to characterize release kinetics, locations, and mechanisms. The measured release rate profiles can be successfully described by a numerical model of internal transport processes, and the results used to extract effective Z-directional diffusion coefficients for various film types. The diffusion coefficients are found to be 8 orders of magnitude lower than those in free solution due to nanochannel confinement and serpentine path effects, and this retardation underlies the ability of 2D materials to control and extend release over useful time scales. In-plane texturing of the heterostructured films by compressive wrinkling or crumpling is shown to be a useful design tool to control the release rate for a given film type and molecular intercalant. The potential of this approach is demonstrated through case studies on the controlled release of chemical virucidal agents.

Antimicrobial Face Shield: Next Generation of Facial Protective Equipment against SARS-CoV-2 and Multidrug-Resistant Bacteria

Transparent materials used for facial protection equipment provide protection against microbial infections caused by viruses and bacteria, including multidrug-resistant strains. However, transparent materials used for this type of application are made of materials that do not possess antimicrobial activity. They just avoid direct contact between the person and the biological agent. Therefore, healthy people can become infected through contact of the contaminated material surfaces and this equipment constitute an increasing source of infectious biological waste. Furthermore, infected people can transmit microbial infections easily because the protective equipment do not inactivate the microbial load generated while breathing, sneezing or coughing. In this regard, the goal of this work consisted of fabricating a transparent face shield with intrinsic antimicrobial activity that could provide extra-protection against infectious agents and reduce the generation of infectious waste. Thus, a single-use transparent antimicrobial face shield composed of polyethylene terephthalate and an antimicrobial coating of benzalkonium chloride has been developed for the next generation of facial protective equipment. The antimicrobial coating was analyzed by atomic force microscopy and field emission scanning electron microscopy with elemental analysis. This is the first facial transparent protective material capable of inactivating enveloped viruses such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in less than one minute of contact, and the methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis. Bacterial infections contribute to severe pneumonia associated with the SARS-CoV-2 infection, and their resistance to antibiotics is increasing. Our extra protective broad-spectrum antimicrobial composite material could also be applied for the fabrication of other facial protective tools such as such as goggles, helmets, plastic masks and space separation screens used for counters or vehicles. This low-cost technology would be very useful to combat the current pandemic and protect health care workers from multidrug-resistant infections in developed and underdeveloped countries.

Equine rotavirus infection

This review briefly describes the virus classification, clinical signs, epidemiology, diagnosis, disinfection, and vaccines related equine group A rotavirus (RVA) infection. Equine RVA is one of the most important pathogens causing diarrhoea in foals. The main transmission route is faecal–oral, and the clinical signs are diarrhoea, fever, lethargy, and anorexia (decreased suckling). Some human RVA rapid antigen detection kits based on the principles of the immunochromatographic assay are useful for the diagnosis of equine RVA infection. The kits are used in daily clinical practice because of their rapidity and ease of handling. Equine RVA is a non-enveloped virus and is more resistant to disinfectants than enveloped viruses such as equine influenza virus and equine herpesvirus. Although amphoteric soaps and quaternary ammonium compounds are commonly used in veterinary hygiene, they are generally ineffective against equine RVA. Alcohol products, aldehydes, and chlorine- and iodine-based compounds are effective against equine RVA. Inactivated vaccines have been used for equine RVA infection in some countries. Pregnant mares are intramuscularly inoculated with a vaccine, and thus their colostrum has abundant antibodies against RVA at the time of birth. According to G and P classification defined in accordance with the VP7 and VP4 genes, respectively, the predominant equine RVAs circulating in horse populations globally are G3P[12] and G14P[12] equine RVAs, but the vaccines contain only the G3P[12] equine RVA strain. Ideally, a G14P[12] equine RVA should be added as a vaccine strain to obtain a better vaccine effect.

Protective Face Mask Filter Capable of Inactivating SARS-CoV-2, and Methicillin-Resistant Staphylococcus aureus and Staphylococcus epidermidis

Face masks have globally been accepted to be an effective protective tool to prevent bacterial and viral transmission, especially against indoor aerosol transmission. However, commercial face masks contain filters that are made of materials that are not capable of inactivating either SARS-CoV-2 or multidrug-resistant bacteria. Therefore, symptomatic and asymptomatic individuals can infect other people even if they wear them because some viable viral or bacterial loads can escape from the masks. Furthermore, viral or bacterial contact transmission can occur after touching the mask, which constitutes an increasing source of contaminated biological waste. Additionally, bacterial pathogens contribute to the SARS-CoV-2-mediated pneumonia disease complex, and their resistance to antibiotics in pneumonia treatment is increasing at an alarming rate. In this regard, herein, we report the development of a non-woven face mask filter fabricated with a biofunctional coating of benzalkonium chloride that is capable of inactivating more than 99% of SARS-CoV-2 particles in one minute of contact, and the life-threatening methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis (normalized antibacterial halos of 0.52 ± 0.04 and 0.72 ± 0.04, respectively). Nonetheless, despite the results obtained, further studies are needed to ensure the safety and correct use of this technology for the mass production and commercialization of this broad-spectrum antimicrobial face mask filter. Our novel protective non-woven face mask filter would be useful for many healthcare workers and researchers working in this urgent and challenging field.

Are Quaternary Ammonium Compounds, the Workhorse Disinfectants, Effective against Severe Acute Respiratory Syndrome-Coronavirus-2?

A novel virus named Severe Acute Respiratory Syndrome-Coronavirus-2 (SARS-CoV-2) emerged from Wuhan, China in late 2019. Since then, the virus has quickly spread worldwide, leading the World Health Organization to declare it as a pandemic; by the end of April 2020, the number of cases exceeded 3 million. Due to the high infectivity rate, SARS-CoV-2 is difficult to contain, making disinfectant protocols vital, especially for essential, highly trafficked areas such as hospitals, grocery stores, and delivery centers. According to the Centers for Disease Control and Prevention, best practices to slow the spread rely on good hand hygiene, including proper handwashing practices as well as the use of alcohol-based hand sanitizers. However, they provide warning against sanitizing products containing benzalkonium chloride (BAC), which has sparked concern in both the scientific community as well as the general public as BAC, a common quaternary ammonium compound (QAC), is ubiquitous in soaps and cleaning wipes as well as hospital sanitation kits. This viewpoint aims to highlight the outdated and incongruous data in the evaluation of BAC against the family of known coronaviruses and points to the need for further evaluation of the efficacy of QACs against coronaviruses.

The study of effect of didecyl dimethyl ammonium bromide on bacterial and viral decontamination for biosecurity in the animal farm

Aim:

The aim of this study was to determine the effectiveness of the fourth-generation quaternary ammonium compounds, didecyl dimethyl ammonium bromide (DDAB), on the efficacy of bacterial and viral decontamination against pathogens commonly found in livestock industry including Salmonella infantis (SI), Escherichia coli, and avian influenza virus (AIV).

Materials and Methods:

The DDAB was prepared at 500, 250, and 125 parts per million (ppm) for absent and present organic material. Meanwhile, 5% of fetal bovine serum in DDAB solution sample was used to mimic the presence of organic material contamination. 400 µl of each DDAB concentration was mixed with 100 µl of each pathogen (SI, E. coli, and AIV) and then incubated at room temperature or 4°C at various time points (5 s, 30 s, 1 min, 5 min, 10 min, 15 min, and 30 min). The activity of DDAB treatment was stopped using 500 µl of FBS. Each treatment sample was titrated on either deoxycholate hydrogen sulfide lactose agar plates or Madin-Darby canine kidney cells for bacteria and AIV, respectively. Each treatment was conducted in triplicates, and the pathogen inactivation was considered effective when the reduction factor was ≥3 log₁₀.

Results:

Our current study revealed that the DDAB inactivated SI, E. coli, and AIV under the various concentrations of DDAB, organic material conditions, exposure temperature, and exposure timing. In addition, the comparison of bactericidal and virucidal efficacy indicated that bacteria were more susceptible to be inactivated by DDAB as compared to viruses. However, DDAB showed marked inactivated differences in the absence or presence of organic materials.

Conclusions:

The DDAB may be a potential disinfectant for inactivating bacteria and viruses, especially enveloped viruses, in livestock farms. It can be useful as a disinfectant for biosecurity enhancement on and around animal farm.