Improvement of mechanical properties of chitosan-based films via physical treatment of film-forming solution

Fluorescent Self-Supporting Composite Film Formed from Chitosan and the Neutral Poly(3-hexylthiophene-co-1,4-phenylene) Polymer with Enhanced Dispersion Properties for a Small Molecule

A composite film of chitosan (Ch) with a neutral conjugated polymer, poly(3-hexylthiophene-co-1,4-phenylene) (PTPh), was developed to combine the adsorption capacity of Ch with the fluorescence sensitivity of PTPh. Characterization of the films using thermogravimetric analysis, microscopy, and infrared, absorption, and fluorescence spectroscopies revealed that the dispersity of the target small molecule, 4-aminoazobenzene (4-AAB), was improved in the composite film compared to the pristine Ch film as evidenced in microscopy studies. In the presence of 4-AAB, the Ch/PTPh film exhibited fluorescence quenching at low 4-AAB concentrations and changes in emission spectra at higher concentrations. Photoisomerization studies suggested that the improved dispersity of 4-AAB in the composite film is due to an increase in the free volume provided by PTPh, with faster cis-to-trans isomerization observed when PTPh was present. Proof-of-concept adsorption experiments showed that the composite film adsorbed 4-AAB from an aqueous solution, leading to a change in the emission properties of the film. This qualitative characterization uncovered a dual role for the conjugated polymer in the composite film: the addition of the polymer changed the morphology and robustness of the film, and the polymer also provides the fluorophore to sense adsorbed molecules over a wide range of 4-AAB concentrations. These results show that the strategy of incorporating water-insoluble polymers at low concentrations into a versatile biopolymer leads to enhanced functionalities of a composite material.

Post-harvest quality preservation of red globe grapes using grape juice-based edible coatings combined with UVC treatment

This study assesses the impact of grape juice-based alginate or chitosan edible coatings, followed by UVC treatment, on the preservation of post-harvest quality of Red Globe grapes. Coated grapes were stored at 5 °C for 28 days, and their physical, chemical, microbiological, and sensory properties were assessed during the storage period. Films were prepared with grape juice using alginate and chitosan and exposed to 32.4 J/m2 UVC irradiation, then characterized for thickness, color, puncture resistance, elongation at break, permeability, and water solubility. Alginate films were more resistant, soluble, and permeable than chitosan films. Coated and/or UVC-treated grapes showed reduced weight loss, minimal color changes, pH, titratable acidity, total soluble solids, and decreased microbial count compared to uncoated grapes. Sensory attributes remained stable for seven days, while control grapes' firmness significantly decreased (p < 0.05). This sustainable approach enhances the preservation of Red Globe, appealing to consumers who prefer natural preservatives.

Development of functionalized poly(lactide) films with chitosan via SI-SARA ATRP as scaffolds for neuronal cell growth

Polylactic acid (PLA), a polymer derived from renewable resources, is gaining increasing attention in the development of biomedical devices due to its cost-effectiveness, low immunogenicity, and biodegradability. However, its inherent hydrophobicity remains a problem, leading to poor cell adhesion features. On this basis, the aim of this work was to develop a method for functionalizing the surface of PLA films with a biopolymer, chitosan (CH), which was proved to be a material with intrinsic cell adhesive properties, but whose mechanical properties are insufficient to be used alone. The combination of the two polymers, PLA as a bulk scaffold and CH as a coating, could be a promising combination to develop a scaffold for cell growth. The modification of PLA films involved several steps: aminolysis followed by bromination to graft amino and then bromide groups, poly(glycidyl methacrylate) (PGMA) grafting by surface-initiated supplemental activator and reducing agent atom transfer radical polymerization (SI-SARA ATRP) and finally the CH grafting. To prove the effective adhesive properties, conjugated and non-conjugated films were tested in vitro as substrates for neuronal cell growth using differentiated neurons from human induced pluripotent stem cells. The results demonstrated enhanced cell growth in the presence of CH.

Chitosan-2D Nanomaterial-Based Scaffolds for Biomedical Applications

Chitosan (CS) and two-dimensional nanomaterial (2D nanomaterials)-based scaffolds have received widespread attention in recent times in biomedical applications due to their excellent synergistic potential. CS has garnered much attention as a biomedical scaffold material either alone or in combination with some other material due to its favorable physiochemical properties. The emerging 2D nanomaterials, such as black phosphorus (BP), molybdenum disulfide (MoS2), etc., have taken huge steps towards varying biomedical applications. However, the implementation of a CS-2D nanomaterial-based scaffold for clinical applications remains challenging for different reasons such as toxicity, stability, etc. Here, we reviewed different types of CS scaffold materials and discussed their advantages in biomedical applications. In addition, a different CS nanostructure, instead of a scaffold, has been described. After that, the importance of 2D nanomaterials has been elaborated on in terms of physiochemical properties. In the next section, the biomedical applications of CS with different 2D nanomaterial scaffolds have been highlighted. Finally, we highlighted the existing challenges and future perspectives of using CS-2D nanomaterial scaffolds for biomedical applications. We hope that this review will encourage a more synergistic biomedical application of the CS-2D nanomaterial scaffolds and their utilization clinical applications.

Serendipity discovery of fire early warning function of chitosan film

Transparent chitosan (CS) film is prepared and its application in high temperature/fire warning is discussed. NaCl-doped chitosan (CS-NaCl) film shows excellent performance in real-time temperature monitoring and fire warning. The temperature warning of CS-NaCl film can be triggered under approximately 50 °C, and it has a good repeatable warning performance under high-temperature conditions. The CS composite film exhibits an ultra-sensitive (0.4 s) warning under fire attacking. A possible electrical conduction and fire-alarm mechanisms are proposed. The addition of NaCl increases the number of charge carriers, which improves the ionic conductivity of the composite film. This study provides a possibility for the application of CS in the field of fire warning.

Biomedical applications of chitosan-graphene oxide nanocomposites

Chitosan (CS) and graphene oxide (GO) nanocomposites have received wide attention in biomedical fields due to the synergistic effect between CS which has excellent biological characteristics and GO which owns great physicochemical, mechanical, and optical properties. Nanocomposites based on CS and GO can be fabricated into a variety of forms, such as nanoparticles, hydrogels, scaffolds, films, and nanofibers. Thanks to the ease of functionalization, the performance of these nanocomposites in different forms can be further improved by introducing other functional polymers, nanoparticles, or growth factors. With this background, the current review summarizes the latest developments of CS-GO nanocomposites in different forms and compositions in biomedical applications including drug and biomacromolecules delivery, wound healing, bone tissue engineering, and biosensors. Future improving directions and challenges for clinical practice are proposed as well.

Electrophoretic fabrication of a robust chitosan/polyethylene glycol/polydopamine composite film for UV-shielding application

The film-forming process of chitosan composite films is an important issue because it affects their experimental design, chemicals used, and feasibility of large-scaled fabrication. In this work, electrophoresis is employed to produce chitosan composite films with significantly reduced processing time and environmentally friendly chemicals. With the addition of hydrogen peroxide and polyethylene glycol, the parasitic hydrogen bubble formation during the electrophoresis of chitosan and polydopamine is effectively inhibited that leads to the formation of a defectless chitosan/polyethylene glycol/polydopamine composite film which could be removed from the substrate readily. In addition, the chitosan/polyethylene glycol/polydopamine composite film reveals significantly improved tensile strength and a slower decomposition rate as compared to those of chitosan film and chitosan/polyethylene glycol composite film. This is attributed to the strong interaction between chitosan and polydopamine. Lastly, the chitosan/polyethylene glycol/polydopamine composite film exhibits excellent UV-shielding ability without compromising its visible transparency.

Chitosan based antibacterial composite materials for leather industry: a review

Abstract

Chitosan is an amorphous translucent substance with a structural unit similar to the polysaccharide structure of the extracellular matrix, It has good antibacterial, biocompatible, and degradable properties. It has important application value in leather, water treatment, medicine, food and other fields, so chitosan and its modified products have received widespread attention. This article reviewed the preparation methods of chitosan-based antibacterial composites in recent years, including chitosan/collagen, chitosan/graphene, chitosan/tannic acid, and chitosan/polyethylene glycol composite materials, elaborates their modification methods and antibacterial mechanism were reviewed in detail, and its applications in the leather industry as antibacterial auxiliaries and water treatment antibacterial adsorption materials were discussed. Finally, the future development and challenges of chitosan-based composite materials in the leather industry were forecasted.

Graphical abstract

Effect of Homogenization Method and Carvacrol Content on Microstructural and Physical Properties of Chitosan-Based Films

The use of EOs nanoemulsion to develop active edible films offers a new way to modify transport properties and to release active compounds while improving mechanical resistance, transparency, and antioxidant and antimicrobial activity. The aim of this study was to study the influence of homogenization conditions and carvacrol content on the microstructure and physical properties of edible nanoemulsified chitosan films. Film-forming emulsions (FFE) were prepared with chitosan (1.5%), Tween 80 (0.5%), and carvacrol (0.25%, 0.5%, and 1.0%); two homogenization methods were used (rotor-stator and rotor-stator followed by high-pressure homogenization). Film internal and surface microstructure was characterized by scanning electron microscopy (SEM) and film physical properties, such as mechanical, optical, and water barrier, were evaluated. Results showed that the high-pressure homogenization method promoted a significant change on film microstructure, leading to improved properties. Carvacrol droplets were smaller and homogeneously distributed in the film when 0.5% (v/v) carvacrol was incorporated (1:1 Tween 80: carvacrol ratio). As a consequence, emulsified films obtained at high pressure were less opaque, had greater elongation, and had a lower permeability to water vapor than those obtained by the rotor-stator method. Therefore, high-pressure homogenization is a good method to obtain edible emulsified films with desirable properties for food preservation.

Rheological and Dielectric Behavior of 3D-Printable Chitosan/Graphene Oxide Hydrogels

The effect of concentration, temperature, and the addition of graphene oxide (GO) nanosheets on the rheological and dielectric behavior of chitosan (CS) solutions, which influences the formation of the blend materials for various applications including 3D printing and packaging, was studied. Among tested acid solutions, the rheological behavior of 1% CS in acetic and lactic acid solutions was found to be similar, whereas the hydrochloric acid solution showed an abnormal drop in the dynamic moduli. Oscillatory rheology confirmed a distinct gel point for the CS solutions at below 10 °C. Both the G' and G″ of the solutions increased with the loading concentrations of GO between 0.5 and 1%, and it marginally dropped at the loading concentration of 2%, which is consistent with AFM observation. The steady-shear flow data fitted the Carreau model. Dielectric property measurement further confirmed that both the dielectric constant, ε' and the loss factor, ε″ for the CS in hydrochloric acid solutions behaved differently from others. Addition of GO significantly improved both ε' and ε″, indicating an improvement in the dielectric properties of CS/GO solutions. The dispersion of GO into the CS matrix was assessed by measuring XRD, FTIR, and microscopy of the film prepared from the solutions. Furthermore, the inclusion of GO into CS solution containing pluronic F127 (F127) base for potential 3D printing application showed positive results in terms of the printing accuracy and shape fidelity of the printed objects (films and scaffolds). The optimized composition with homogeneous particle distribution indicated that up to ∼50 mg/mL GO concentration (w/v of F127 base) was suitable to print both films and scaffolds for potential biomedical applications.

Hybrid chitosan/β-1,3-glucan matrix of bone scaffold enhances osteoblast adhesion, spreading and proliferation via promotion of serum protein adsorption

Initial protein adsorption to the material surface is crucial for osteoblast adhesion, survival, and rapid proliferation resulting in intensive new bone formation. The aim of this study was to demonstrate that modification of a chitosan matrix of chitosan/hydroxyapatite (chit/HA) biomaterial for bone tissue engineering applications with linear β-1,3-glucan (curdlan) leads to promotion of serum protein adsorption to the resultant scaffold (chit/glu/HA) and thus in enhancement of osteoblast adhesion, spreading and proliferation. Fabricated biomaterials were pre-adsorbed with different protein solutions and then protein adsorption and osteoblast behavior on the scaffolds were compared. Moreover, surface chemical composition, wettability and surface energy of biomaterials were compared. Modification of the chitosan matrix with β-1,3-glucan introduces a greater polarpart in the resultant chitosan/β-1,3-glucan matrix presumably resulting from more OH groups within the curdlan structure. Moreover, FTIR-ATR results suggest that there might be some sort of chemical interaction between the NH group of chitosan and the OH group of β-1,3-glucan. As a consequence, the chit/glu/HA scaffold adsorbs significantly more adhesion proteins that are crucial for osteoblasts compared to the chit/HA material, providing a higher density culture of well-spread osteoblasts on its surface. Obtained results revealed that not only is chit/glu/HA biomaterial a promising scaffold for bone tissue engineering applications, but the specific polysaccharide chit/glu matrix itself is promising for use in the biomedical material field to modify various biomaterials in order to enhance osteoblast adhesion and proliferation on their surfaces.

Fluorescent bio-nanocomposites based on chitosan reinforced hemicyanine dye-modified montmorillonite

The present investigation describes the synthesis and detailed characterization of novel fluorescent bio-nanocomposite films of chitosan reinforced by hemicyanine dye-modified montmorillonite (MMT–HD) using a solvent-casting method.