Enhancing the hydration process of common beans by ultrasound and high temperatures: Impact on cooking and thermodynamic properties

Investigation of the Ultrasonic Treatment-Assisted Soaking Process of Different Red Kidney Beans and Compositional Analysis of the Soaking Water by NIR Spectroscopy

The processing of beans begins with a particularly time-consuming procedure, the hydration of the seeds. Ultrasonic treatment (US) represents a potential environmentally friendly method for process acceleration, while near-infrared spectroscopy (NIR) is a proposedly suitable non-invasive monitoring tool to assess compositional changes. Our aim was to examine the hydration process of red kidney beans of varying sizes and origins. Despite the varying surface areas, the beans' soaking times of 13-15, 15-17, and 17-19 mm did not reveal significant differences between any of the groups (control; low power: 180 W, 20 kHz; high power: 300 W, 40 kHz). US treatment was observed to result in the release of greater quantities of water-soluble components from the beans. This was evidenced by the darkening of the soaking water's color, the increase in the a* color parameter, and the rise in the dry matter value. NIRs, in combination with chemometric tools, are an effective tool for predicting the characteristics of bean-soaking water. The PLSR- and SVR-based modelling for dry matter content and light color parameters demonstrated robust model fits with cross and test set-validated R2 values (>0.95), suggesting that these techniques can effectively capture the chemical information of the samples.

Antinutritional factors and protein digestibility of broad bean flours hydrolysed during soaking using vacuum enzyme impregnation

The hydrolysis of legume proteins improves their nutritional and functional properties. Usually done by mixing flour with an enzyme solution, the process can be simplified using vacuum enzyme impregnation during soaking. This study used vacuum impregnation with papain or bromelain to obtain hydrolysed broad bean flours. It examined the impact of vacuum impregnation and enzyme incorporation on hydration kinetics and the impact of hydrolysis and dehulling on antinutritional factors and protein digestibility. Vacuum impregnation accelerated hydration and enzyme incorporation did not alter the hydration rate. Maximum hydrolysis degrees were 9.1 % with papain and 8.8 % with bromelain after 4 h of soaking. Hydrolysis increased phytic acid, total phenolics, and tannins content while decreasing trypsin inhibitors. Dehulling increased phytic acid and trypsin inhibitors, reduced tannins, and enhanced protein digestibility. Vacuum enzyme impregnation during soaking was effective for hydration and protein hydrolysis, modifying the nutritional properties of broad bean flours.

Towards more sustainable cooking practices to increase the bioaccessibility of colourless and provitamin A carotenoids in cooked carrots

The effect of different cooking methods (boiling, baking, steaming and microwaving) on the colour and texture of carrots, as well as on the bioaccessibility of carotenoids, was investigated in order to identify the more "sustainable cooking" methods. Cooking resulted in statistically significant increases in total carotenoid bioaccessibility, both with intensity and duration of treatments. In particular, significant increases in carotenoid bioaccessible content (CBC) were observed, ranging from 6.03-fold (microwave) to 8.90-fold (baking) for the most intense cooking conditions tested. Although the relative concentration of the colourless carotenoids (phytoene and phytofluene) in raw carrots is lower than that of provitamins A α- and β-carotene, the bioaccessible content of the colourless ones is much higher. From an energy consumption standpoint and considering samples with the same tenderness, the highest CBC values per kWh decreased in the order microwaving > baking > water cooking > steaming. Our findings are important to help combat vitamin A deficiency since increases of up to ∼40-fold and ∼70-fold in the CBCs of the vitamin A precursors α- and β-carotene, respectively, were observed. These results provide a basis for defining "sustainable cooking" as "cooking practices that optimize intensity, duration and other parameters leading to a more efficient use of energy to maximize the bioavailability of nutrients and other beneficial food components (such as bioactives) while ensuring food appeal and safety".

Comparative study of ultrasound application versus mechanical agitation on pork belly brining for bacon production

Pork belly brining is a time-consuming step of bacon production that needs to be studied and enhanced through suitable technologies. In this sense, this study aimed at evaluating the impact of ultrasound (US), mechanical agitation (AG), and static brine (SB) on the kinetics of water loss (WL), solids gain (SG), and salt content (SC) of pork belly during brining under different temperatures. Mathematical models were used to estimate mass transfer rates, equilibrium parameters, and thermodynamic properties. Peleg model was chosen as the most suitable model to predict the kinetics experimental data (Radj2 ≥ 0.979 and RMSE ≤ 0.014). The increase in the brine temperature increased WL, SG, and SC for all treatments. Nonlinear effects of temperature were observed for WL, SG, and SC, following an Arrhenius-type behavior. The assistance of ultrasound significantly enhanced the velocity of WL, SG, and SC by 32-56%, while AG improved by 18-39% both compared to SB. Brining was considered an endothermic and non-spontaneous process through the thermodynamic assessment. The increase in temperature and the AG and US processes accelerated the formation of the activated complex. The application of ultrasound was considered the most suitable technology to reduce the brining time. However, significant improvements can be obtained by mechanical agitation. Therefore, both methods can be used to reduce the time processing of pork belly aiming at accelerating the bacon production process.

Optimization of Ultrasound-Assisted Pretreatment for Accelerating Rehydration of Adzuki Bean (Vigna angularis)

Adzuki bean (Vigna angularis), which provides plant-based proteins and functional substances, requires a long soaking time during processing, which limits its usefulness to industries and consumers. To improve this, ultrasonic treatment using high pressure and shear force was judged to be an appropriate pretreatment method. This study aimed to determine the optimal conditions of ultrasound treatment for the improved hydration of adzuki beans using the response surface methodology (RSM). Independent variables chosen to regulate the hydration process of the adzuki beans were the soaking time (2-14 h, X1), treatment intensity (150-750 W, X2), and treatment time (1-10 min, X3). Dependent variables chosen to assess the differences in the beans post-immersion were moisture content, water activity, and hardness. The optimal conditions for treatment deduced through RSM were a soaking time of 12.9 h, treatment intensity of 600 W, and treatment time of 8.65 min. In this optimal condition, the values predicted for the dependent variables were a moisture content of 58.32%, water activity of 0.9979 aw, and hardness of 14.63 N. Upon experimentation, the results obtained were a moisture content of 58.28 ± 0.56%, water activity of 0.9885 ± 0.0040 aw, and hardness of 13.01 ± 2.82 g, confirming results similar to the predicted values. Proper ultrasound treatment caused cracks in the hilum, which greatly affects the water absorption of adzuki beans, accelerating the rate of hydration. These results are expected to help determine economically efficient processing conditions for specific purposes, in addition to solving industrial problems associated with the low hydration rate of adzuki beans.

Effect of cooking on structural changes in the common black bean (Phaseolus vulgaris var. Jamapa)

The cooking process is fundamental for bean consumption and to increase the bioavailability of its nutritional components. The study aimed to determine the effect of cooking on bean seed coat through morphological analyses with different microscopy techniques and image analyses. The chemical composition and physical properties of raw black bean (RBB) and cooked black bean (CBB) seeds were determined. The surface and cross-sectional samples were studied by Optical microscopy (OM), environmental scanning electron microscopy (ESEM), atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). The composition of samples showed significant differences after the cooking process. OM images and gray level co-occurrence matrix algorithm (GLCM) analysis indicated that cuticle-deposited minerals significantly influence texture parameters. Seed coat surface ESEM images showed cluster cracking. Texture fractal dimension and lacunarity parameters were effective in quantitatively assessing cracks on CBB. AFM results showed arithmetic average roughness (Ra) (121.67 nm) and quadratic average roughness (Rq) (149.94 nm). The cross-sectional ESEM images showed a decrease in seed coat thickness. The CLSM results showed an increased availability of lipids along the different multilayer tissues in CBB. The results generated from this research work offer a valuable potential to carry out a strict control of bean seed cooking at industrial level, since the structural changes and biochemical components (cell wall, lipids and protein bodies) that occur in the different tissues of the seed are able to migrate from the inside to the outside through the cracks generated in the multilayer structure that are evidenced by the microscopic techniques used.

Drying kinetics and quality dynamics of ultrasound-assisted dried selenium-enriched germinated black rice

Black rice is a functional food due to its higher protein, fiber, iron, antioxidant compounds, and other health benefits than traditional rice. The ultrasonic (US) pretreatments (10, 20, and 50 min) followed by hot-air drying (50, 60, and 70 °C) were applied to study the drying kinetics, mathematical modeling, thermodynamics, microstructure, bioactive profile, volatile compounds and to lock the nutritional composition of selenium-enriched germinated black rice (SeGBR). Ultrasonic-treated samples exhibited a 20.5% reduced drying time than control ones. The Hii model accurately describes the drying kinetics of SeGBR with the highest R2 (>0.997 to 1.00) among the fifteen studied models. The activation energy values in US-SeGBR varied from 3.97 to 13.90 kJ/mol, while the specific energy consumption ranged from 6.45 to 12.32 kWh/kg, which was lower than untreated. The obtained thermodynamic attributes of dried black rice revealed that the process was endothermic and non-spontaneous. Gallic acid, kaempferol, and cyanidin 3-glucoside were present in high concentrations in phenolics, flavonoids, and anthocyanins, respectively. The HS-SPME-GC-MS investigation detected and quantified 55 volatile compounds. The US-treated SeGBR had more volatile compounds, which may stimulate the release of more flavorful substances. The scanning electronic micrograph shows that the US-treated samples absorbed high water through several micro-cavities. Selenium concentration was significantly higher in US-treated samples at 50 °C than in control samples. In conclusion, ultrasound-assisted hot-air drying accelerated drying and improved SeGBR quality, which is crucial for the food industry and global promotion of this healthiest rice variety.

Hard-to-cook phenomenon in common legumes: Chemistry, mechanisms and utilisation

Future dietary protein demand will focus more on plant-based sources than animal-based products. In this scenario, legumes and pulses (lentils, beans, chickpeas, etc.) can play a crucial role as they are one of the richest sources of plant proteins with many health benefits. However, legume consumption is undermined due to the hard-to-cook (HTC) phenomenon, which refers to legumes that have high resistance to softening during cooking. This review provides mechanistic insight into the development of the HTC phenomenon in legumes with a special focus on common beans and their nutrition, health benefits, and hydration behaviour. Furthermore, detailed elucidation of HTC mechanisms, mainly pectin-cation-phytate hypothesis and compositional changes of macronutrients like starch, protein, lipids and micronutrients like minerals, phytochemicals and cell wall polysaccharides during HTC development are critically reviewed based on the current research findings. Finally, strategies to improve the hydration and cooking quality of beans are proposed, and a perspective is provided.

Bioactive Nutrient Retention during Thermal-Assisted Hydration of Lupins

Lupin, an arid pulse, is gaining popularity as a super food due to its superior nutritional properties. However, it has not been considered for large scale thermal processing, e.g., canning. The present work evaluated the best time/temperature combination to hydrate lupins for canning with minimum losses of bioactive nutrients, pre-biotic fibre, and total solids during hydration. The two lupin species showed a sigmoidal hydration behaviour, which was adequately modelled by the Weibull distribution. The effective diffusivity, D_eff, increased from 7.41 × 10^-11 to 2.08 × 10^-10 m²/s for L. albus and 1.75 × 10^-10 to 1.02 × 10^-9 m²/s for L. angustifolius with increasing temperature, namely, from 25 °C to 85 °C. The lag phase decreased from 145 min to 56 min in L. albus and 61 min to 28 min in L. angustifolius. However, based on the effective hydration rate, reaching the equilibrium moisture, minimum loss of the solids, and prebiotic fibre and phytochemicals, 200 min hydration at 65 °C can be regarded as the optimum temperature of hydration. The findings are thus relevant for designing the hydration protocol to achieve the maximum equilibrium moisture content and yield with the minimum loss of solids (phytochemicals and prebiotic fibres) for L. albus and L. angustifolius.

Food-Package-Processing relationships in emerging technologies: Ultrasound effects on polyamide multilayer packaging in contact with different food simulants

In this study, the effect of ultrasound processing on the properties of two packages widely used in food products was evaluated: polyamide (PA) and polyethylene (PE) multilayer packaging. Packages composed of PE/PA/PE (Film A) and PE/PA/PE/PA/PE (Film B) were filled with aqueous and fatty food simulants and treated in an ultrasound water bath (frequency 25 kHz, volumetric power of 9.74 W/L, temperature of 25 °C, and time of 30 and 60 min). Materials were evaluated in term of structure and performance properties. Ultrasound did not or induced small changes in chemical groups, crystallinity, melting temperature, and tensile strength of the films. Film A showed a reduction in heat sealing tensile strength of 25% in the machine direction and 22% in the transverse direction. Film B showed a 20% increase of water vapor transmission rate after ultrasound processing. Although ultrasound had little impact on the properties of the evaluated materials, these modifications do not compromise the use of these packages for applications in ultrasound-processed foods. Therefore, the results indicate that ultrasound can be used as a food processing technology in multilayer PA and PE packaging.

Effect of Microwave Treatment on Adzuki Beans (Vigna angularis L.) under Dry State-Analyzing Microstructure, Water Absorption, and Antioxidant Properties

In this study, a microwave was used on adzuki beans (Arari and Geomguseul) without water, in order to investigate their changes in microstructure, water absorption, and antioxidative properties. As the microwave treatment time increased (2450 MHz, 0 to 60 s), the lightness, redness, and yellowness were reduced, and moisture content significantly decreased in both varieties. The microstructure space between the seed coat, cotyledon, and pores within the cotyledon were observed, due to the loss of moisture. Regardless of microwave treatment, the water absorption behavior of the adzuki beans was sigmoidal. However, the water absorption kinetics of Arari increased after microwave treatment, whereas with microwave-treated Geomguseul, the water absorption rate decreased, compared to the control, except for the sample treated for 30 s. During soaking, the water absorption and softening rates in the microwave-treated adzuki bean were twice as fast as the untreated beans. Antioxidant activity, total phenolic compounds, and total flavonoid compounds were greatly improved by microwave treatment. These results indicate that microwave treatment affects the color, hydration, and bioactive compounds, and it can be used as a pretreatment method before processing adzuki beans.

Kinetic study on soybean hydration during soaking and resulting softening kinetic during cooking

This work evaluated the hydration kinetics of three yellow soybeans and one black soybean (Glycine max (Linn.) Merr.) at five temperatures (5-40°C), as well as the softening kinetics of steamed and boiled soybeans after hydration. The results showed that high temperature promoted water absorption and solids loss. Dongbei large soybean had the fastest water absorption than all others and its water diffusivities varied from 4.4×10-11 (m2 /s) to 2.6×10-10 (m2 /s) at the tested temperatures. Page model provided the best prediction of moisture content of four varieties of soybeans at five temperatures. The thermodynamic coefficient indicated that hydration is a nonspontaneous phenomenon. In addition, results showed that four soybeans exhibited no significant differences in softening rate during the cooking process, although the black soybean had the highest ultimate hardness relative to the yellow soybeans. Taken together, these new results will provide theoretical support for industrial soaking and cooking approaches for soybeans.

Thermal treatment of common beans (Phaseolus vulgaris L.): Factors determining cooking time and its consequences for sensory and nutritional quality

Over the past years, the shift toward plant-based foods has largely increased the global awareness of the nutritional importance of legumes (common beans (Phaseolus vulgaris L.) in particular) and their potential role in sustainable food systems. Nevertheless, the many benefits of bean consumption may not be realized in large parts of the world, since long cooking time (lack of convenience) limits their utilization. This review focuses on the current insights in the cooking behavior (cookability) of common beans and the variables that have a direct and/or indirect impact on cooking time. The review includes the various methods to evaluate textural changes and the effect of cooking on sensory attributes and nutritional quality of beans. In this review, it is revealed that the factors involved in cooking time of beans are diverse and complex and thus necessitate a careful consideration of the choice of (pre)processing conditions to conveniently achieve palatability while ensuring maximum nutrient retention in beans. In order to harness the full potential of beans, there is a need for a multisectoral collaboration between breeders, processors, and nutritionists.

Sono-hydro priming process (ultrasound modulated hydration): Modelling hydration kinetic during paddy germination

Application of ultrasound technology in modulating the hydration process during paddy germination was analyzed in this study. The effect of hydropriming (24 h) and sono-hydro priming (ultrasound priming, 12 h) on the hydration behaviour of paddies was determined at different temperatures (25-40 °C). Ultrasound pulse was applied for 10 min after every one hour for sono-hydro priming. Germination potential and microstructure analysis of treated paddies were also performed. Downward concave curve observed in hydration process of paddies indicates initial high-water absorptionthrough diffusion process. Sono-hydro priming process showed higher hydration rate compared to hydropriming. The changes in moisture content during hydration processes fitted to theoretical (Fick's model) and empirical model (Peleg model) exhibited high regression coefficient (R² > 0.95) indicating suitability for predicting hydration behaviour in both paddies for germination. The Peleg model adequately predicted saturation moisture content and sono-hydro priming efficiently increased the water absorption rate. Effective moisture diffusivity determined from Fick's diffusion model increased for sono-hydro priming. Activation energy estimated from effective moisture diffusivity required in sono-hydro priming (E_a = 20.32 and 19.19 KJ/mol respectively) for pigmented rice and non-pigmented rice was lower than hydropriming (E_a = 27.11 and 32.15 KJ/mol respectively). Both hydration processes were endothermic and non-spontaneous inferred from thermodynamic properties. Sono-hydro priming exhibited < 95% germination potential with shorter soaking time (12 h) owing to the high mass transfer rate. SEM micrograph revealed water absorption through various micro-cavities during sono-hydro priming. Thus, sono-hydro priming potentially reduced the soaking process (approximately 50%) with higher germination rate in paddies beneficial for commercial malting of grains.

Combining Ionizing Irradiation and Ultrasound Technologies: Effect on Beans Hydration and Germination

The present work studied, for the first time, the effect of two technologies on the hydration and germination process of beans: ionizing irradiation and ultrasound. In addition, this work proposed a possible biological effect of ultrasound to describe its effect on grain hydration. Carioca beans were irradiated at doses of 2.3 and 3.8 kGy using γ-rays, establishing different metabolic activities for the beans. Then, they were hydrated with and without the ultrasound technology (91 W/L and 25 kHz) at 25 °C. Both the hydration and germination kinetics were evaluated considering the application of both technologies alone and in combination. As results, irradiation did not significantly affect (P > 0.05) the hydration rate, the equilibrium moisture, or the lag phase time, but ultrasound affected them, reducing 50% of the processing time. On the other hand, only the equilibrium moisture was slightly reduced by the interactive effect of irradiation and ultrasound technology, which was discussed based on different metabolism levels. Furthermore, the germination process of carioca bean was hindered by both the studied variables, reducing its germination capacity to 0% in some cases. Therefore, by studying the effect of ultrasound on beans with different active metabolism (due to different irradiation doses), it was suggested that both physical and biological mechanisms are involved during hydration process and that both can be affected by ultrasound. Further, irradiation could be used on carioca beans with objectives such as avoid germination, insects, and microorganism's growth, without an important effect on the hydration kinetics. PRACTICAL APPLICATION: Ultrasound technology has demonstrated to accelerate the soaking process of several legume grains. However, sometimes, grains are irradiated for disinfestation purpose to improve their shelf life. Indeed, irradiation can change the grain properties as the cooking time, hydration time, and germination capacity. Therefore, this work verified if irradiation changes the desirable effect of ultrasound on grain processing: soaking and germination. Moreover, this work novelty is also based on describing the phenomena: by proposing a possible biological effect, further approaches to improve the grain processing can be achieved.

Kinetic and thermodynamic compensation study of the hydration of faba beans (Vicia faba L.)

This work applies kinetic and thermodynamic compensation to evaluate the kinetics of hydration of faba beans. A mechanism was proposed, consisting of a zero-order adsorption step followed by a first-order desorption step, with both reactions going through a transition state with a previous equilibrium stage. The kinetic constants were obtained from a previous study for pHs 3, 6, 9 and 12 and at temperatures of 20, 35, 50 and 65 °C. From these kinetic constants, the equilibrium constants were calculated using the Eyring equation for each pH value and temperature. The kinetic constants were fitted to the Arrhenius equation and the set of pair estimates for lnk₀ and the activation energy followed the straight lines that cause the kinetic compensation, with isokinetic temperatures of -10.3 °C found for the zero-order adsorption step and 8.4 °C for the first-order desorption step. The equilibrium constants were fitted to the Van't Hoff equation and the set of pair estimates for the activation enthalpy and the activation entropy followed the straight lines that cause thermodynamic compensation. The isoequilibrium temperatures were obtained as -11.4 °C for the zero-order adsorption step and 7.5 °C for the first-order desorption step. As expected, the isokinetic and the isoequilibrium temperatures were very close for each step. The mechanism was concluded to be the same for the ranges of pH and temperature studied. Since all the isokinetic and isoequilibrium temperatures were lower than the working temperature values, the control was concluded to be entropic for all cases. Statistical compensation could be discarded for the zero-order adsorption step but for the first-order desorption step, the compensation was concluded to be as significant as the experimental propagation of errors.

Modelling the physical properties change of canned glutinous rice porridge during cooking

In this study, we modeled the water absorption, softening and shear viscosity change kinetics of canned rice porridge during cooking as well as estimated the thermodynamic properties involved in hydration. Moreover, the internal microstructure of rice kernels was observed under different hydrothermal conditions. During cooking, the water absorption and shear viscosity alteration rate increased with temperature, whereas the softening rate decreased. However, the temperature did not significantly affect the equilibrium value of the physical properties. The variation tendencies of the moisture content and hardness of the kernels could be expressed satisfactorily by the exponential and the generalized exponential models. The porridge shear viscosity variations fitted the sigmoidal and its generalized models. Thermodynamic parameters (enthalpy, entropy and Gibbs free energy) revealed that the hydration process was non-spontaneous and exothermic. Furthermore, scanning electron microscopy images and the results of the X-ray diffraction analysis showed the microstructure of the kernels during cooking, and the kernels formed a homogeneous mesh structure at earlier times during the initial stage at higher temperatures. These findings would provide valuable information for the optimization of canned rice porridge production.