Effect of pH on cadmium biosorption by coconut copra meal

One material, two functions: A dual-mechanistic approach for the removal of persistent and mobile organic micropollutants from drinking water

Organic micropollutants (OMP), especially those that are more persistent and mobile due to their physico-chemical properties, are resistant to common water treatment techniques and might reach drinking water. Considering the wide range and different physico-chemical properties of persistent and mobile (PM) substances, the strategic integration of synergistic processes appears as a promising solution for the removal of persistent and mobile substances. In this study, the development of a dual-functional material is explored for synergistic adsorption and catalysis, presenting a dual-mechanistic approach for removing potentially persistent and mobile substances from drinking water. The material was fabricated using waste materials (coffee and aluminum wastes) and tested for removing 23 selected OMP. The results demonstrate that the dual-functional material can both adsorb some target OMP and activate persulfate to oxidize OMP by generating reactive oxygen species (ROS). Recycling of the material in repeated cycles revealed removal of several OMP even in 5th cycle, using 0.5 g/L of the synthesized material, 0.5 mM persulfate and 1 h contact time. Quenching experiments indicated that singlet oxygen (1O2) is the dominant ROS in the proposed system, implying that it is a non-radical advanced oxidation process.

Analysis of the Cadmium Removal Mechanism of Human Gut Bacteria Enterococcus faecalis Strain ATCC19433 from a Genomic Perspective

Cadmium (Cd) is one of the most well-known toxic metals capable of entering the human body via the food chain, leading to serious health problems. Human gut microbes play a pivotal role in controlling Cd bioavailability and toxicity within the human gastrointestinal tract, primarily due to their capacity for Cd adsorption and metabolism. In this work, a Cd-resistant bacterial strain, Enterococcus faecalis strain ATCC19433 was isolated from human gut microbiota. Cd binding assays and comprehensive characterization analyses were performed, revealing the ability of strain ATCC19433 to remove Cd from the solution. Cd adsorption primarily occurred on the bacterial cell walls, which was ascribed to the exciting of functional groups on the bacterial surfaces, containing alkyl, amide II, and phosphate groups; meanwhile, Cd could enter cells, probably through transport channels or via diffusion. These results indicated that Cd removal by the strain was predominantly dependent on biosorption and bioaccumulation. Whole-genome sequencing analyses further suggested the probable mechanisms of biosorption and bioaccumulation, including Cd transport by transporter proteins, active efflux of Cd by cadmium efflux pumps, and mitigating oxidative stress-induced cell damage by DNA repair proteases. This study evaluated the Cd removal capability and mechanism of Enterococcus faecalis strain ATCC19433 while annotating the genetic functions related to Cd removal, which may facilitate the development of potential human gut strains for the removal of Cd.

A chitosan-based magnetic system for response surface methodology (RSM) optimization of the influencing variables in ciprofloxacin loading/releasing

We optimized the loading and release processes of Ciprofloxacin (CIP) on Fe3O4/Chitosan (FCS) magnetic nanoparticles (MNPs) for drug delivery applications. The Fe3O4 MNPs were synthesized via the coprecipitation method and subsequently coated with Chitosan to enhance their properties. Ciprofloxacin was used as a model drug. We characterized the structure, morphology, physicochemical, and magnetic properties of both the Fe3O4/CS MNPs and the CIP-loaded Fe3O4/CS MNPs using various techniques, including SEM, EDX, FTIR, XRD, VSM, TGA, and elemental mapping. In the spectrum of Fe3O4/CS/CIP, the appearance of absorption bands at 3437 cm-1 and 2908 cm-1 for -OH, and -NH2 functional groups of chitosan, the bands at 1378 cm-1 and 1066 cm-1 belong to its CH-OH and -C-O-C groups, and the bands at 1945 cm-1 and 1606 cm-1 of CIP carbonyl groups confirm modification of magnetite NPs by CS and loading CIP by the modified adsorbent. The average crystallite size was obtained about 20 nm based on the diffraction data. The modified adsorbent has a pHpzc of 6.1. The effects of different factors such as pH, time, temperature, and initial concentration on CIP's loading and release processes were studied using response surface methodology (RSM). Our findings indicated that the concentration of CIP was the most significant factor influencing the loading process, while time was the most crucial factor for the release process. The optimal conditions for loading were determined to be at pH 9 with a stirring time of 13 h, whereas the optimal conditions for release were at pH 2.7 with a stirring time of 9 h within a range of 1 to 9 h. One-factor-at-a-time studies indicated that a concentration of 20 ppm and an exposure time of 8 h had the most significant effects on loading and release, respectively.

Methylene blue and Congo red dye elimination from synthetic wastewater using Albizia lebbeck seed pod powder: isotherm and kinetic and mechanistic studies

This research examined the effectiveness of using Albizia lebbeck seed pods (ALB) as an adsorbent to remove dye effluents and clean up wastewater. More specifically, the binding capacity of methylene blue (MB) and Congo red (CR) dyes from aqueous solution using unmodified Albizia lebbeck seed pods (UALB) and citric acid modified Albizia lebbeck seed pods (CALB) were compared. The adsorbents underwent characterization via the use of Fourier transform infrared spectroscopy and scanning electron microscopy. Several operational factors were investigated using batch tests to ascertain their effects. These parameters included pH, adsorbent dose, interaction duration, and initial dye concentration. The residual dye concentrations were determined, and the data generated were fitted to equilibrium and kinetic models. In CALB and UALB, MB adsorption ideal pH values were 10 and 12, whereas CR optimal pH values were 3 and 2. Also, MB and CR equilibrium durations were 360 and 240 min, respectively. Temkin model best described the adsorption in CALB (r 2  = 0.9916, 0.9484) whereas Freundlich worked well for UALB in MB and CR (r 2  = 0.9626, 0.9871). Kinetic modeling of the adsorption data showed that the pseudo-second-order kinetic model provided the best fit (r 2  = 0.9998, 0.9999) for CALB and (r 2  = 1, 0.9992) for UALB for both MB and CR dyes. Maximum adsorption for MB was 9.499 mg/g and for CR it was 8.628 mg/g, and the findings showed a positive linear correlation between the concentration of dye-ions and their adsorption ability. The CALB also demonstrated superior efficacy in the removal of MB (4.661 mg/g) dye relative to CR (4.113 mg/g). The results of this study demonstrate that the use of ALB, in both modified and unmodified forms, is a cost-effective and efficient approach for the removal of MB and CR from the aqueous environment.

Utilization of Low Cost Biofertilizers for Adsorptive Removal of Congo Red Dye

Presence of colors, organic surface finishing agents and surfactants in textile industry effluent makes it highly detrimental for surrounding environment. Hence the effluent from textile industry needs treatment for removal of these colors, organic and inorganic components before its disposal. Hence applicability of low cost and environmental friendly biosorbents, Azospirillium biofertilizer and Rhizobium biofertilizer were investigated for removal of Congo red dye. Batch experimentation was carried out to check operating parameters like, temperature, dose of adsorbent, pH, agitation speed, contact time and initial concentration. The biosorption capacity for Congo red dye was 67.114 and 101.01 mg/g, for Azospirillium biofertilizer and Rhizobium biofertilizer, respectively at optimized parameters. RL factor was 0.558 and 0.568 for Azospirillium biofertilizer and Rhizobium biofertilizer. The data showed combination of interaction-based separation through better fitting of Langmuir isotherm compared to Freundlich. Its separation is well described by Pseudo-second order and intraparticle diffusion model. Adsorption was favorable at lower temperature suggesting exothermic and spontaneous nature. Reusability for Azospirillium biofertilizer and Rhizobium biofertilizer was checked for 25 mg/land. While the biological nature of Azospirillium and Rhizobium biofertilizer makes removal of Congo red dye environmentally benign.

Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach

The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.

Role of calcium carbonate in the process of heavy metal biosorption from solutions: synergy of metal removal mechanisms

The effect of calcium carbonate on the removal efficiency of cations of the selected heavy metals Cu, Zn and Pb from aqueous solutions using various biosorbents (BS) was investigated under laboratory static conditions. The main mechanism of biosorption of heavy metal cations is ion exchange, whereas the reaction with calcium carbonate results in precipitation of poorly soluble carbonates and hydroxides of the examined heavy metals. Studies conducted under static conditions have shown that the effect of Cu and Zn cations removal from solutions is better when using a mixture of BS and CaCO₃ as compared to the effect of process, in which these two components were used separately. Removal efficiency for Cu and Zn has been shown to increase from 20 to 50% depending on the BS used. For the removal of lead cations, a measurable effect is found only for biosorbents whose active centers are saturated with protons (improvement in removal efficiency by about 20%). A synergy effect in the flow system was also investigated. It was found that under the conditions of the experiment, the addition of powdered CaCO₃, in a weight ratio of 1 g CaCO₃: 15 g BS, increases the removal efficiency of all the metals studied by 20-30%. It has been shown that an important role in the process of heterophasic ion exchange is played by neutralization of protons-desorbed from the biosorbents-with hydroxide ions released into the solution by partial dissolution of CaCO₃ and subsequent hydrolysis reaction.

Selective detection of Cu2+ ions using a mercaptobenzothiazole disulphide modified carbon paste electrode and bismuth as adjuvant: a theoretical and electrochemical study

Bismuth adsorbed on the MBTS-modified surface facilitates the mass and charge transfer necessary for copper's selective sensing.

Raphia-Microorganism Composite Biosorbent for Lead Ion Removal from Aqueous Solutions

This study investigated the possibility of obtaining a raphia-microorganism composite for removing lead ions from aqueous solutions using immobilized yeast cells Saccharomyces cerevisiae on Raphia farinifera fibers. The obtained biocomposite was characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. Studies were conducted to determine the influence of contact time, initial concentration of Pb(II), and pH allowed for the selection of nonlinear equilibrium and kinetic models. The results showed that the biocomposite had a better Pb(II) removal capacity in comparison to the raphia fibers alone, and its maximum Pb(II) adsorption capacity was 94.8 mg/g. The model that best describes Pb(II) sorption was the Temkin isotherm model, while kinetic studies confirmed the chemical nature of the sorption process following the Elovich model. The obtained research results provide new information on the full use of the adsorption function of biomass and the ubiquitous microbial resources and their use in the remediation of aqueous environments contaminated with heavy metals.

Removal of Toxic Heavy Metals from Contaminated Aqueous Solutions Using Seaweeds: A Review

Heavy metal contamination affects lives with concomitant environmental pollution, and seaweed has emerged as a remedy with the ability to save the ecosystem, due to its eco-friendliness, affordability, availability, and effective metal ion removal rate. Heavy metals are intrinsic toxicants that are known to induce damage to multiple organs, especially when subjected to excess exposure. With respect to these growing concerns, this review presents the preferred sorption material among the many natural sorption materials. The use of seaweeds to treat contaminated solutions has demonstrated outstanding results when compared to other materials. The sorption of metal ions using dead seaweed biomass offers a comparative advantage over other natural sorption materials. This article summarizes the impact of heavy metals on the environment, and why dead seaweed biomass is regarded as the leading remediation material among the available materials. This article also showcases the biosorption mechanism of dead seaweed biomass and its effectiveness as a useful, cheap, and affordable bioremediation material.

Adsorption of Cationic Dyes on a Magnetic 3D Spongin Scaffold with Nano-Sized Fe3O4 Cores

The renewable, proteinaceous, marine biopolymer spongin is yet the focus of modern research. The preparation of a magnetic three-dimensional (3D) spongin scaffold with nano-sized Fe3O4 cores is reported here for the first time. The formation of this magnetic spongin-Fe3O4 composite was characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential thermal analysis (DTA) (TGA-DTA), vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FTIR), and zeta potential analyses. Field emission scanning electron microscopy (FE-SEM) confirmed the formation of well-dispersed spherical nanoparticles tightly bound to the spongin scaffold. The magnetic spongin-Fe3O4 composite showed significant removal efficiency for two cationic dyes (i.e., crystal violet (CV) and methylene blue (MB)). Adsorption experiments revealed that the prepared material is a fast, high-capacity (77 mg/g), yet selective adsorbent for MB. This behavior was attributed to the creation of strong electrostatic interactions between the spongin-Fe3O4 and MB or CV, which was reflected by adsorption mechanism evaluations. The adsorption of MB and CV was found to be a function of pH, with maximum removal performance being observed over a wide pH range (pH = 5.5-11). In this work, we combined Fe3O4 nanoparticles and spongin scaffold properties into one unique composite, named magnetic spongin scaffold, in our attempt to create a sustainable absorbent for organic wastewater treatment. The appropriative mechanism of adsorption of the cationic dyes on a magnetic 3D spongin scaffold is proposed. Removal of organic dyes and other contaminants is essential to ensure healthy water and prevent various diseases. On the other hand, in many cases, dyes are used as models to demonstrate the adsorption properties of nanostructures. Due to the good absorption properties of magnetic spongin, it can be proposed as a green and uncomplicated adsorbent for the removal of different organic contaminants and, furthermore, as a carrier in drug delivery applications.

Novel fabrication of a yeast biochar-based photothermal-responsive platform for controlled imidacloprid release

For improving the utilization efficiency of pesticides, we developed a novel pesticide delivery particle (YINCP@EC) with a core–shell structure based on yeast biochar, imidacloprid (IMI), ammonium bicarbonate (NH₄HCO₃), calcium alginate (CA), and ethyl cellulose (EC). Therein, yeast biochar, IMI and NH₄HCO₃ were absorbed in the network-structured of CA to obtain YINCP through hydrogen bonds. The resulting composite was granulated using an ion gelation technique and then coated with EC to form YINCP@EC. In this platform, yeast biochar serving as a photothermal agent can efficiently convert sunlight energy into thermal energy, thereby triggering NH₄HCO₃ decomposition into CO₂ and NH₃ that can break through the EC coating and facilitate IMI release. In addition, the influence of yeast biochar content, pH, and coexisting ions was systematically studied to evaluate the release behavior of IMI from YINCP@EC. Moreover, the hydrophobic EC shell endowed YINCP@EC with high stability in aqueous solution for at least 60 days. Consequently, this novel composite with simple preparation, low cost and remarkable photothermal-responsive properties has a huge application potential in agriculture.

The yeast biochar-based platform exhibited excellent photothermal conversion capability, and realized light-triggered controlled release of IMI.

Modified Ziziphus spina-christi stones as green route for the removal of heavy metals

Green routes for remediation of heavy metals are worldwide challenges to overcome pollution problems on one hand and control the adverse impact of chemicals on the other hand. Biosorption is one of the most effective methods for removing lower level of heavy metals. The idea to apply natural resources as a green method for removal of heavy metals, this route has no adverse impacts on the environment. This study investigated the ability of chemically modified Ziziphus spina-christi stones (ZSCs) as agriculture by-products to perform the biosorption of Pb(II), Zn(II) and Cd(II) ions from wastewater in a single and ternary metal system. The characteristic functional groups of chemically modified ZSCs were analyzed by Fourier transform infrared. In comparison with acidic ZSCs, alkali-modified ZSCs by KOH was more effective and enhanced the removal efficiency of ZSCs. Using Langmuir isotherm, the maximum adsorption capacity on the modified ZSCs for Pb(II) was 9.06 mg/g, for Zn(II) obtained by using ZSC-citric acid was 4.19 mg/g and 5.38 mg/g for Cd(II) as obtained by using ZSC-H2O2. The molecular electrostatic potential, which was calculated at B3LYP/6-31G(d,p), indicated that each metal is di-hydrated, forming a complex with two units of amino acids. This mechanism demonstrated the uptake process by ZSCs.

Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption: a review

Abstract

Chromium is widely used in industry, and improper disposal of wastewater and industrial residues containing excessive chromium can contaminate water and soil, endangering both environmental and human health. Natural biopolymers and their derivatives have been investigated for removal of chromium (Cr) from wastewater. Cellulose, lignin, tannin, chitin, chitosan, and polypeptides are abundant in nature, and have high potential as adsorbents due to their easy access, low cost, and the recyclability of the captured heavy metals. In order to improve their mechanical strength, recyclability, specific surface area, binding site number, and adsorption rate as adsorbents, native materials have also been modified. This review discusses the source of chromium contamination and the main species of interest, as well as their toxicity. The structures of the aforementioned biopolymers were analyzed, and the adsorption mechanism of chromium and the main influencing factors on this process are discussed. The modification methods of various adsorbents and their adsorption effects on chromium are also detailed, and the developmental direction of research on the use of biopolymer adsorption remediation to control chromium contamination is discussed.

Graphical abstract

Optimization of Ni (II) biosorption from aqueous solution on modified lemon peel

The valorization of agricultural waste peels as a low-cost biosorbent is a promising approach to water treatment. In this work, the improvement of the adsorption capacity of lemon peel to remove Ni (II) from aqueous effluents was explored using several chemical modifiers: HNO₃, HCl, H₃PO₄, CaCl₂, NH₃ and NaOH. The surface pretreatment using NaOH was selected as the best option because of the improvement of the maximum adsorption capacity. The maximum adsorption capacity was of 36.74 mg g^-1 according to the Langmuir model at optimum conditions (pH = 5, S/L = 5 g L^-1, 25 °C). The pseudo-first order model of biosorption kinetics provides the best fit for experimental data. From thermodynamic studies, it was concluded that Ni (II) biosorption by modified lemon peel was endothermic and spontaneous. After five consecutives adsorption-desorption cycles using 0.1 M of HNO₃ and H₂SO₄, a recovery of 90% of Ni (II) was obtained. Regarding characterization of the biosorbent, the surface morphology was studied by Scanning Electron Microscopy while the functional groups responsible for Ni (II) adsorption were evaluated by Fourier transform infrared spectroscopy.

Recent advances in hexavalent chromium removal from aqueous solutions by adsorptive methods

Chromium exists mainly in two forms in environmental matrices, namely, the hexavalent (Cr(vi)) and trivalent (Cr(iii)) chromium. While Cr(iii) is a micronutrient, Cr(vi) is a known carcinogen, and that warrants removal from environmental samples. Amongst the removal techniques reported in the literature, adsorption methods are viewed as superior to other methods because they use less chemicals; consequently, they are less toxic and easy to handle. Mitigation of chromium using adsorption methods has been achieved by exploiting the physical, chemical, and biological properties of Cr(vi) due to its dissolution tendencies in aqueous solutions. Many adsorbents, including synthetic polymers, activated carbons, biomass, graphene oxide, and nanoparticles as well as bioremediation, have been successfully applied in Cr(vi) remediation. Initially, adsorbents were used singly in their natural form, but recent literature shows that more composite materials are generated and applied. This review focused on the recent advances, insights, and project future directions for these adsorbents as well as compare and contrast the performances achieved by the mentioned adsorbents and their variants.

Bioaccumulation and biosorption of zinc by a novel Streptomyces K11 strain isolated from highly alkaline aluminium brown mud disposal site

Zinc biosorption and bioaccumulation by a novel extremely Zn tolerant Streptomyces K11 strain isolated from highly alkaline environment were examined. Temperature, similarly as biosorbent preparation, has negligible effect on the biosorption capacity but very strong effect on the process kinetics. Initial adsorption rate increased almost 10 times with the temperature increase from 10 to 50 °C and it was 30 times higher when non-dried biomass was used. The biosorption study revealed that the process was mainly chemically controlled, however at lower temperature intra-particle diffusion played significant role in the zinc biosorption. The experimental data fitted the Langmuir isotherm model with the maximum biosorption capacity 0.75 mmol g^-1. The results of bioaccumulation onto a living biomass of Streptomyces K11 indicated very high bioaccumulation capacity of 4.4 mmol g^-1. Zinc extracellular uptake (43%) slightly exceeded the intracellular accumulation (36%). High zinc bioaccumulation capacity was obviously related to extremely high zinc tolerance of Streptomyces K11.

Adsorption of sugarcane vinasse effluent on bagasse fly ash: A parametric and kinetic study

Sugarcane and bioethanol production produces large amounts of bagasse fly ash and vinasse, which are solid and viscous liquid wastes, respectively. However, these wastes are often disposed into the environment without treatment, thus posing an environmental and public health risk. This study investigated the treatment of vinasse effluent in terms of reduction of chemical oxygen demand (COD) and acidity removal using sugarcane bagasse fly ash. A maximum COD removal efficiency of 72% was obtained using an effluent volume of 100 mL, contact time of 180 min, and shaking speed of 240 rpm. The adsorbent dose and particle sizes were 4.5 g and 90-125 μm, respectively. Furthermore, the potential application of bagasse fly ash as an adsorbent in a sand filtration bed was assessed using a column test. A maximum recovery of 68% was obtained at the 25-min interval. The adsorption data was found to fit the Freundlich model best (K_f = 2.16 mg g^-1; R² = 0.96), and the kinetics fit the pseudo-second order model (R² = 0.98).

Determination of point of zero charge of natural organic materials

This study evaluates different methods to determine points of zero charge (PZCs) on five organic materials, namely maple sawdust, wood ash, peat moss, compost, and brown algae, used for the passive treatment of contaminated neutral drainage effluents. The PZC provides important information about metal sorption mechanisms. Three methods were used: (1) the salt addition method, measuring the PZC; (2) the zeta potential method, measuring the isoelectric point (IEP); (3) the ion adsorption method, measuring the point of zero net charge (PZNC). Natural kaolinite and synthetic goethite were also tested with both the salt addition and the ion adsorption methods in order to validate experimental protocols. Results obtained from the salt addition method in 0.05 M NaNO₃ were the following: 4.72 ± 0.06 (maple sawdust), 9.50 ± 0.07 (wood ash), 3.42 ± 0.03 (peat moss), 7.68 ± 0.01 (green compost), and 6.06 ± 0.11 (brown algae). Both the ion adsorption and the zeta potential methods failed to give points of zero charge for these substrates. The PZC of kaolinite (3.01 ± 0.03) was similar to the PZNC (2.9-3.4) and fell within the range of values reported in the literature (2.7-4.1). As for the goethite, the PZC (10.9 ± 0.05) was slightly higher than the PZNC (9.0-9.4). The salt addition method has been found appropriate and convenient to determine the PZC of natural organic substrates.

Optimization of adsorption process parameters by response surface methodology for hexavalent chromium removal from aqueous solutions using Annona reticulata Linn peel microparticles

Fruit peel microparticles of Annona reticulata Linn were used as biosorbent for the sequestration of hexavalent chromium (CR(VI)). Characterization of the biosorbent was done using scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDXS), Fourier transfer infrared spectroscopy (FTIR), gas chromatography-mass spectrometry (GCMS), carbon, hydrogen, nitrogen and sulphur (CHNS) elemental analysis, mercury intrusion porosimetry and point of zero charge. Influential parameters were optimized using response surface methodology (RSM) with a total of 17 experimental runs based on the Box-Behnken design and found to be pH 1.0, temperature 25 °C and 100 mg/L initial chromium concentration. pH and concentration were found to be more influential than temperature. The analysis of variance indicated that a second-order polynomial regression equation was the most suitable for fitting the experimental data. The experimental runs showed a good correlation with the predicted responses (R² = 0.9956). The biosorption process fitted well with the Langmuir isotherm with an adsorption capacity of 108. 32 mg/g out of the other isotherms such as Freundlich and Dubinin-Radushkevich that were analyzed. Non linear pseudo first order, pseudo second order, and intraparticle diffusion kinetics were applied to describe the interaction between the biosorbent and Cr(VI). Desorption and regeneration performances showed that fruit peels of Annona reticulata Linn can be an environmental friendly option for hexavalent chromium removal from aqueous solutions.

Removal of toxic Congo red dye from water employing low-cost coconut residual fiber

The coconut residual fiber (CRF) is the major byproduct obtained during production of virgin coconut oil. Its application as a biosorbent for adsorption of Congo red was investigated. The CRF was subjected to different pretreatments, namely, pressure cooking, hexane treatment, acid treatment and their combinations. The pretreatment of CRF with the combination of hexane, acid, and pressure cooking resulted in the highest degree of adsorption. The equilibrium data were analyzed and found to fit best to both Langmuir and Freundlich isotherms. Thermodynamic parameters such as standard free energy (ΔG⁰ kJ mol^-1), standard enthalpy (ΔH⁰, kJ mol^-1) and standard entropy (ΔS⁰, kJ mol^-1 K^-1) of the systems were calculated by using the Langmuir constant. The ΔG⁰, ΔH⁰ and ΔS⁰ were found to be 16.51 kJ mol^-1, -19.39 kJ mol^-1 and -0.12 kJ mol^-1 K^-1, respectively, at 300 K. These thermodynamic parameters suggest the present adsorption process to be non-spontaneous and exothermic. The adsorption process was observed to follow pseudo-second-order kinetics. The results suggest that CRF has potential to be a biosorbent for the removal of hazardous material (Congo red dye) with a maximum adsorption capacity of 128.94 mg g^-1 at 300 K.

Fabrication of phytic acid-modified wheat straw platform and its pH-responsive release performance for the pesticide imidacloprid

For the effective utilization of pesticides and the treatment of abundant waste wheat straw (WS) resources, an eco-friendly composite PA-WS platform was prepared by modification of WS with phytic acid (PA).

Removal of cadmium(II) ions from aqueous solution using Ni (15 wt.%)-doped α-Fe2O3 nanocrystals: equilibrium, thermodynamic, and kinetic studies

The present publication investigates the performance of nanocrystalline Ni (15 wt.%)-doped α-Fe2O3 as an effective nanomaterial for the removal of Cd(II) ions from aqueous solutions. The nanocrystalline Ni-doped α-Fe2O3 powders were prepared by mechanical alloying, and characterized by X-ray diffraction and a vibrating sample magnetometer. Batch-mode experiments were realized to determine the adsorption equilibrium, kinetics, and thermodynamic parameters of toxic heavy metal ions by Ni (15 wt.%)-doped α-Fe2O3. The adsorption isotherms data were found to be in good agreement with the Langmuir model. The adsorption capacity of Cd(II) ion reached a maximum value of about 90.91 mg g(-1) at 328 K and pH 7. The adsorption process kinetics was found to comply with pseudo-second-order rate law. Thermodynamic parameters related to the adsorption reaction, free energy change, enthalpy change and entropy change, were evaluated. The found values of free energy and enthalpy revealed a spontaneous endothermic adsorption-process. Moreover, the positive entropy suggests an increase of randomness during the process of heavy metal removal at the adsorbent-solution interface.

Thermo-chemical modification to produce citric acid–yeast superabsorbent composites for ketoprofen delivery

The native yeast microbes were used to prepare a novel eco-friendly superabsorbent composite through thermo-chemical modification of yeast with citric acid in semi-dry conditions for ketoprofen delivery.

Potential of biological materials for removing heavy metals from wastewater

Agricultural products/by-products are natural sorbent materials that possess capacity for removing contaminants including heavy metals from wastewaters and hence can be exploited as replacement of costly methods for wastewater treatment. The sorption of heavy metals onto these biomaterials is attributed to constituent's proteins, carbohydrates, and phenolic compounds that contain functional groups such as carboxylate, hydroxyl, and amine. Natural efficiency of these materials for removing heavy metals can be enhanced by treating them with chemicals. The present review emphasizes their use in developing eco-friendly technology for a large-scale treatment of wastewater.

Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations. Ion exchange was identified as one of the mechanisms involved in the sorption of Hg onto cork in the absence of ionic competition. Under ionic competition, stopper-derived cork showed to be extremely effective and selective for mercury in binary mixtures, while in complex matrices like seawater, moderate inhibition of the sorption process was observed, attributed to a change in mercury speciation. The loadings achieved are similar to the majority of literature values found for other biosorbents and for other metals, suggesting that cork stoppers can be recycled as an effective biosorbent for water treatment. However, the most interesting result is that equilibrium data show a very rare behaviour, with the isotherm presenting an almost square convex shape to the concentration axis, with an infinite slope for an Hg concentration in solution around 25 μg/L.

Adsorption of radiocesium from aqueous solution using chemically modified pine cone powder

In this study, toluene–ethanol mixtures were investigated as chemical modifying agents for pine cone powder (PCP) and the optimum modification ratio determined by measuring the improvement in surface properties of the PCP such as Brunauer–Emmett–Teller (BET) surface area, bulk density, and surface negative charge. The modified adsorbents were then applied for the removal of cesium ions from aqueous solution. The result revealed that the chemically modified PCP had better surface properties than the raw BET surface area, and X-ray diffraction (XRD) spectra revealed that the surface area improved and cellulose crystallinity reduced. Cesium adsorption by the chemically modified PCP was much higher than for the raw PCP. Desorption studies were also performed to evaluate the mechanism of adsorption.

Removal of lead ions from aqueous solution by the dried aquatic plant, Lemna perpusilla Torr

The aquatic plant, Lemna perpusilla Torr. strain, was dried, pulverized and used for Pb(II) removal from aqueous solution. Batch experiments were conducted to investigate the effects of pH, contact time, initial metal concentration and temperature on Pb(II) adsorption. A dose of 4 g L(-1) of dried L. perpusilla in a solution with an initial pH of 4.6, an initial Pb(II) concentration of 50 mg L(-1) and a contact time of 210 min resulted in the maximum Pb(II) removal efficiency (above 95%). The equilibrium adsorption capacities increased with increasing initial Pb(II) concentration. The adsorption isotherm was better described by a Langmuir model rather than a Freundlich model. Further, the adsorption kinetics followed a pseudo-second-order model. An FTIR examination revealed changes between the natural and Pb(II)-loaded plant material. Scanning electron micrograph (SEM) also revealed changes in the surface morphology of the biomass as a result of lead adsorption. Based on these results, it can be concluded that the dried L. perpusilla is effective in removing lead from aqueous solution and merits consideration for scaled-up trials.