The impact of toxicity of metals on the activity of ureolytic mixed culture during the precipitation of calcium

Testing the Capacity of Staphylococcus equorum for Calcium and Copper Removal through MICP Process

This research focused on the evaluation of the potential use of a soil-isolated bacteria, identified as Staphylococcus equorum, for microbial-induced calcite precipitation (MICP) and copper removal. Isolated bacteria were characterized considering growth rate, urease activity, calcium carbonate precipitation, copper tolerance as minimum inhibitory concentration (MIC) and copper precipitation. Results were compared with Sporosarcina pasteurii, which is considered a model bacteria strain for MICP processes. The results indicated that the S. equorum strain had lower urease activity, calcium removal capacity and copper tolerance than the S. pasteurii strain. However, the culture conditions tested in this study did not consider the halophilic feature of the S. equorum, which could make it a promising bacterial strain to be applied in process water from mining operations when seawater is used as process water. On the other hand, copper removal was insufficient when applying any of the bacteria strains evaluated, most likely due to the formation of a copper–ammonia complex. Thus, the implementation of S. equorum for copper removal needs to be further studied, considering the optimization of culture conditions, which may promote better performance when considering calcium, copper or other metals precipitation.

Multiple heavy metals immobilization based on microbially induced carbonate precipitation by ureolytic bacteria and the precipitation patterns exploration

Biomineralization to immobilize the toxic metal has great potential for the bioremediation of multiple heavy metal contamination. In this study, the efficiency of Microbially Carbonate Induced Precipitation (MICP) for several common heavy metals (Cu, Zn, Ni, Cd) in mining areas as well as their precipitation patterns were researched. After urease activity and precipitation ability comparison, Sporosarcina kp-4 and kp-22 were selected for subsequent studies. The removal of Cd was mainly based on the formation of cadmium carbonate induced by bacteria activity, while the removal of Cu was depended on the pH increase generated by the same process. Precipitation contributed to Zn and Ni removal was more complex, which was also based on the MICP process. Removal rates of Cu, Zn, Ni, and Cd (the concentration of all metals was 160 mg/L) reached 75.10%, 98.03%, 59.46% and 96.18%, respectively, within 2 h. For the immobilization of Cu, Zn, Ni and Cd at 160 mg/L, the optimal dosages of bacterial cultured solution were about 0.25 mL, 0.8 mL, 0.5 mL and 0.8 mL, respectively. Minimum inhibitory concentrations (MIC) revealed the toxicity of these heavy metals for MICP bacteria was arrange as: Cd > Zn > Ni > Cu. Our study confirmed that urease-producing bacteria could coprecipitate multiple heavy metals even without the ability tolerate them, and the MICP process was an effective biological approach that was worth investigating further to immobilize multiple heavy metals in ecological restoration.

Metal pollution as a potential threat to shell strength and survival in marine bivalves

Marine bivalve molluscs, such as scallops, mussels and oysters, are crucial components of coastal ecosystems, providing a range of ecosystem services, including a quarter of the world's seafood. Unfortunately, coastal marine areas often suffer from high levels of metals due to dumping and disturbance of contaminated material. We established that increased levels of metal pollution (zinc, copper and lead) in sediments near the Isle of Man, resulting from historical mining, strongly correlated with significant weakening of shell strength in king scallops, Pecten maximus. This weakness increased mortality during fishing and left individuals more exposed to predation. Comparative structural analysis revealed that shells from the contaminated area were thinner and exhibited a pronounced mineralisation disruption parallel to the shell surface within the foliated region of both the top and bottom valves. Our data suggest that these disruptions caused reduced fracture strength and hence increased mortality, even at subcritical contamination levels with respect to current international standards. This hitherto unreported effect is important since such non-apical responses rarely feed into environmental quality assessments, despite potentially significant implications for the survival of organisms exposed to contaminants. Hence our findings highlight the impact of metal pollution on shell mineralisation in bivalves and urge a reappraisal of currently accepted critical contamination levels.

Long-term effect of different Cu(II) concentrations on the performance, microbial enzymatic activity and microbial community of sequencing batch reactor

The performance, microbial community and enzymatic activity of sequencing batch reactors (SBRs) were investigated under 75-day exposure of different Cu(II) concentrations. Cu(II) at 0-5 mg/L had no distinct impact on the chemical oxygen demand (COD) and nitrogen removal, oxygen-uptake rate (OUR), nitrification and denitrification rate, and microbial enzymatic activity. The inhibitory effects of Cu(II) at 10 and 30 mg/L on the nitrogen removal rate, OUR, and microbial enzymatic activity of SBR increased with an increment in operation time due to the Cu(II) biotoxicity and the Cu(II) accumulation in activated sludge. The changes of microbial reactive oxygen species production, lactate dehydrogenase release, catalase activity and superoxide dismutase activity demonstrated that Cu(II) at 10 and 30 mg/L broke the equilibrium between the oxidation and antioxidation processes in microbial cells and also damaged the cytomembrance integrity, which could affect the COD and nitrogen removal performance and change normal microbial cell morphology. The Cu(II) in the influent could be removed by the microbial absorption and accumulated in the activated sludge under long-term exposure. The microbial community displayed some distinct changes from 0 to 30 mg/L Cu(II). In contrast with 0 mg/L Cu(II), Nitrosomonas, Nitrospira and some denitrifying bacteria obviously decreased in relative abundance under long-term exposure of 10 and 30 mg/L Cu(II).

Microbial network of the carbonate precipitation process induced by microbial consortia and the potential application to crack healing in concrete

Current studies have employed various pure-cultures for improving concrete durability based on microbially induced carbonate precipitation (MICP). However, there have been very few reports concerned with microbial consortia, which could perform more complex tasks and be more robust in their resistance to environmental fluctuations. In this study, we constructed three microbial consortia that are capable of MICP under aerobic (AE), anaerobic (AN) and facultative anaerobic (FA) conditions. The results showed that AE consortia showed more positive effects on inorganic carbon conversion than AN and FA consortia. Pyrosequencing analysis showed that clear distinctions appeared in the community structure between different microbial consortia systems. Further investigation on microbial community networks revealed that the species in the three microbial consortia built thorough energetic and metabolic interaction networks regarding MICP, nitrate-reduction, bacterial endospores and fermentation communities. Crack-healing experiments showed that the selected cracks of the three consortia-based concrete specimens were almost completely healed in 28 days, which was consistent with the studies using pure cultures. Although the economic advantage might not be clear yet, this study highlights the potential implementation of microbial consortia on crack healing in concrete.

Carbonate Precipitation through Microbial Activities in Natural Environment, and Their Potential in Biotechnology: A Review

Calcium carbonate represents a large portion of carbon reservoir and is used commercially for a variety of applications. Microbial carbonate precipitation, a by-product of microbial activities, plays an important metal coprecipitation and cementation role in natural systems. This natural process occurring in various geological settings can be mimicked and used for a number of biotechnologies, such as metal remediation, carbon sequestration, enhanced oil recovery, and construction restoration. In this study, different metabolic activities leading to calcium carbonate precipitation, their native environment, and potential applications and challenges are reviewed.

Biomineralization of calcium carbonates and their engineered applications: a review

Microbially induced calcium carbonate precipitation (MICCP) is a naturally occurring biological process in which microbes produce inorganic materials as part of their basic metabolic activities. This technology has been widely explored and promising with potential in various technical applications. In the present review, the detailed mechanism of production of calcium carbonate biominerals by ureolytic bacteria has been discussed along with role of bacteria and the sectors where these biominerals are being used. The applications of bacterially produced carbonate biominerals for improving the durability of buildings, remediation of environment (water and soil), sequestration of atmospheric CO2 filler material in rubbers and plastics etc. are discussed. The study also sheds light on benefits of bacterial biominerals over traditional agents and also the issues that lie in the path of successful commercialization of the technology of microbially induced calcium carbonate precipitation from lab to field scale.

Engineered applications of ureolytic biomineralization: a review

Microbially-induced calcium carbonate (CaCO3) precipitation (MICP) is a widely explored and promising technology for use in various engineering applications. In this review, CaCO3 precipitation induced via urea hydrolysis (ureolysis) is examined for improving construction materials, cementing porous media, hydraulic control, and remediating environmental concerns. The control of MICP is explored through the manipulation of three factors: (1) the ureolytic activity (of microorganisms), (2) the reaction and transport rates of substrates, and (3) the saturation conditions of carbonate minerals. Many combinations of these factors have been researched to spatially and temporally control precipitation. This review discusses how optimization of MICP is attempted for different engineering applications in an effort to highlight the key research and development questions necessary to move MICP technologies toward commercial scale applications.

Investigation of the inhibitory effects of heavy metals on heterotrophic biomass activity and their mitigation through the use of natural minerals

This study examined the inhibitory effects of lead, copper, nickel and zinc on heterotrophic biomass and their potential mitigation through the use of low-cost, natural minerals. Activated sludge was placed in batch reactors and specific heavy metal concentrations were added. Subsequently, the biomass specific oxygen uptake rate (sOUR) was determined to assess the level of biomass inhibition. Biomass inhibition by heavy metals followed the order Cu(2+)>Pb(2+)>Zn(2+)>Ni(2+), with copper being the most toxic metal, causing high inhibition of heterotrophic biomass even at relatively low concentrations (i.e. 10 mg·L(-1)). Zn had very small toxic effect at 10 mg·L(-1), while at 40 mg·L(-1) the level of biomass inhibition reached 80%. Nickel stimulated activated sludge activity at concentrations of the order of 10 mg·L(-1). The addition of 10 g·L(-1) bentonite and zeolite in activated sludge resulted in the decrease of the inhibitory effect of heavy metals on biomass respiratory activity. In some cases, mineral addition was very favorable as inhibition was reduced from 69-90% to less than 55% and even up to 12%. The beneficial action of minerals is attributed both to the adsorption of heavy metals on the mineral and on the potential aggregation between mineral and sludge particles.

Toxicity of copper(II) ions to microorganisms in biological wastewater treatment systems

Copper is an essential element, however, this heavy metal is an inhibitor of microbial activity at relatively low concentrations. The objective of this study was to evaluate the inhibitory effect of copper(II) towards various microbial trophic groups responsible for the removal of organic constituents and nutrients in wastewater treatment processes. The results of the batch bioassays indicated that copper(II) caused severe inhibition of key microbial populations in wastewater treatment systems. Denitrifying bacteria were found to be very sensitive to the presence of copper(II). The concentrations of copper(II) causing 50% inhibition (IC(50)) on the metabolic activity of denitrifiers was 0.95 mg L(-1). Copper was also inhibitory to fermentative bacteria, aerobic glucose-degrading heterotrophs, and nitrifying bacteria (IC(50) values=3.5, 4.6 and 26.5 mg L(-1), respectively). Nonetheless, denitrifying and nitrifying bacteria showed considerable recovery of their metabolic activity after only several days of exposure to high copper levels (up to 25 and 100mg Cu(II) L(-1) for denitrification and nitrification, respectively). The recovery could be due to attenuation of soluble copper or to microbial adaptation.

Examination of zinc uptake in a combined system using sludge, minerals and ultrafiltration membranes

This work investigates the feasibility of zinc removal from wastewater with the use of ultrafiltration (UF) membranes combined with natural minerals and sludge. Activated sludge obtained from a membrane bioreactor (MBR) was enriched with initial zinc concentration of 320 mg/L and specific concentrations of zeolite, bentonite and vermiculite. The mixture was agitated and placed inside a batch ultrafiltration unit where the filtration process took place. The effect of several parameters on zinc removal was investigated including the mineral type, quantity and grain size, the metal-mineral contact time and the associated kinetics, the pH value, the zinc initial concentration and sludge mixed liquor suspended solids (MLSS) concentration. The ultrafiltration membranes without any mineral addition were able to remove 38-78% of zinc ions due to biosorption on sludge flocs. The addition of minerals increased the Zn(II) removal efficiencies reaching in some cases more than 90%. Bentonite was the most effective mineral in zinc removal followed by vermiculite. Alkaline pH values favoured zinc removal due to enhanced chemical precipitation. A three-stage adsorption process was identified where the boundary layer diffusion process was followed by a two-stage intraparticle diffusion process. Powder size vermiculite was more effective than granular vermiculite in zinc removal. Minerals also resulted in membrane fouling mitigation since the membrane permeability drop was reduced. The combined sludge-mineral-ultrafiltration system can be effectively employed for the treatment of industrial wastewater.