Adsorption of uranium from aqueous solution by PAMAM dendron functionalized styrene divinylbenzene

Adsorbents for the Uranium Capture from Seawater for a Clean Energy Source and Environmental Safety: A Review

On the global level, uranium is considered the main nuclear energy source, and its removal from terrestrial ores is enough to last until the end of the current century. Therefore, a major focus is attracted toward the capture of uranium from a sustainable source (seawater). Uranium recovery from seawater has been reported over the last few decades, and recently many efforts have been devoted to the preparation of such adsorbents with higher selectivity and adsorption capacity. The purpose of this review is to report the advancement in adsorbent preparation and modification of porous materials. It also discusses challenges such as adsorbent selectivity, low uranium concentration in seawater, contact time, biofouling, and the solution to the problems necessary to ensure a better adsorption performance of the adsorbent.

Actinide Ion (Americium-241 and Uranium-232) Interaction with Hybrid Silica-Hyperbranched Poly(ethylene imine) Nanoparticles and Xerogels

The binding of actinide ions (Am(III) and U(VI)) in aqueous solutions by hybrid silica-hyperbranched poly(ethylene imine) nanoparticles (NPs) and xerogels (XGs) has been studied by means of batch experiments at different pH values (4, 7, and 9) under ambient atmospheric conditions. Both materials present relatively high removal efficiency at pH 4 and pH 7 (>70%) for Am(III) and U(VI). The lower removal efficiency for the nanoparticles is basically associated with the compact structure of the nanoparticles and the lower permeability and access to active amine groups compared to xerogels, and the negative charge of the radionuclide species is formed under alkaline conditions (e.g., UO2(CO3)34- and Am(CO3)2-). Generally, the adsorption process is relatively slow due to the very low radionuclide concentrations used in the study and is basically governed by the actinide diffusion from the aqueous phase to the solid surface. On the other hand, adsorption is favored with increasing temperature, assuming that the reaction is endothermic and entropy-driven, which is associated with increasing randomness at the solid-liquid interphase upon actinide adsorption. To the best of our knowledge, this is the first study on hybrid silica-hyperbranched poly(ethylene imine) nanoparticle and xerogel materials used as adsorbents for americium and uranium at ultra-trace levels. Compared to other adsorbent materials used for binding americium and uranium ions, both materials show far higher binding efficiency. Xerogels could remove both actinides even from seawater by almost 90%, whereas nanoparticles could remove uranium by 80% and americium by 70%. The above, along with their simple derivatization to increase the selectivity towards a specific radionuclide and their easy processing to be included in separation technologies, could make these materials attractive candidates for the treatment of radionuclide/actinide-contaminated water.

Efficient Removal of Uranyl Ions Using PAMAM Dendrimer: Simulation and Experiment

In this work, using atomistic molecular dynamics (MD) simulations and polymer-assisted ultrafiltration experiments, we explore the adsorption and removal of uranyl ions from aqueous solutions using poly(amidoamine) (PAMAM) dendrimers. The effects of uranyl ion concentration and the pH of the solution were examined for PAMAM dendrimers of generations 3, 4, and 5. Our simulation results show that PAMAM has a high adsorption capacity for the uranyl ions. The adsorption capacity increases with increasing concentration of uranyl ions for all 3 generations of PAMAM in agreement with experimental findings. We find that the number of uranyl ions bound to PAMAM is significantly higher in acidic solutions (pH < 3) as compared to neutral solutions (pH ∼ 7) for all uranyl ion concentrations. Additionally, we find an increase in the number of adsorbed uranyl ions to PAMAM with the increase in the dendrimer generation. This increase is due to the greater number of binding sites present for higher-generation PAMAM dendrimers. Our simulation study shows that nitrate ions form a solvation shell around uranyl ions, which allows them to bind to PAMAM binding sites, including the amide, amine, and carbonyl groups. In polymer-assisted ultrafiltration (PAUF) experiments, the removal percentage of uranyl ions by G3 PAMAM dendrimer increased from 36.3% to 42.6% as the metal ion concentration increased from 2.1 × 10^-5 M to 10.5 × 10^-5 M at a pH of 2. Our combined experiment and simulation study suggests that PAMAM is an effective adsorbent for removing uranyl ions from aqueous solutions.

Application of Hydrogen-Bonded Organic Frameworks in Environmental Remediation: Recent Advances and Future Trends

The hydrogen-bonded organic frameworks (HOFs) are a class of porous materials with crystalline frame structures, which are self-assembled from organic structures by hydrogen bonding in non-covalent bonds π-π packing and van der Waals force interaction. HOFs are widely used in environmental remediation due to their high specific surface area, ordered pore structure, pore modifiability, and post-synthesis adjustability of various physical and chemical forms. This work summarizes some rules for constructing stable HOFs and the synthesis of HOF-based materials (synthesis of HOFs, metallized HOFs, and HOF-derived materials). In addition, the applications of HOF-based materials in the field of environmental remediation are introduced, including adsorption and separation (NH3, CO2/CH4 and CO2/N2, C2H2/C2He and CeH6, C2H2/CO2, Xe/Kr, etc.), heavy metal and radioactive metal adsorption, organic dye and pesticide adsorption, energy conversion (producing H2 and CO2 reduced to CO), organic dye degradation and pollutant sensing (metal ion, aniline, antibiotic, explosive steam, etc.). Finally, the current challenges and further studies of HOFs (such as functional modification, molecular simulation, application extension as remediation of contaminated soil, and cost assessment) are discussed. It is hoped that this work will help develop widespread applications for HOFs in removing a variety of pollutants from the environment.

Characteristic Aspects of Uranium(VI) Adsorption Utilizing Nano-Silica/Chitosan from Wastewater Solution

A new nano-silica/chitosan (SiO₂/CS) sorbent was created using a wet process to eliminate uranium(VI) from its solution. Measurements using BET, XRD, EDX, SEM, and FTIR were utilized to analyze the production of SiO₂/CS. The adsorption progressions were carried out by pH, SiO₂/CS dose, temperature, sorbing time, and U(VI) concentration measurements. The optimal condition for U(VI) sorption (165 mg/g) was found to be pH 3.5, 60 mg SiO₂/CS, for 50 min of sorbing time, and 200 mg/L U(VI). Both the second-order sorption kinetics and Langmuir adsorption model were observed to be obeyed by the ability of SiO₂/CS to eradicate U(VI). Thermodynamically, the sorption strategy was a spontaneous reaction and exothermic. According to the findings, SiO₂/CS had the potential to serve as an effectual sorbent for U(VI) displacement.

Radiation synthesis of imidazolium-based polymeric ionic liquid gel for efficient adsorption of Re(VII) and U(VI) from aqueous solution

In this research, an imidazolium-based polymeric ionic liquid (PIL) gel was effectively synthesized in one step via electron beam (EB) radiation technology. The synthesized gel with gel fraction of 78% under 80 kGy was used for the adsorption and separation of Re(VII) and U(VI). The structure of the gel was characterized by FTIR, SEM, BET, and XPS. Furthermore, batch adsorption was experimented to explore its performance of Re(VII) and U(VI) removal. The two adsorption processes all more fitted the Langmuir isotherm model with the maximum adsorption capacities of 892.9 mg/g for Re(VII) and 243.9 mg/g for U(VI). The adsorption reached equilibrium within 1 min for Re(VII), while within 4 min for U(VI), showing its greatly rapid adsorption rate because of its three-dimensional porous network structure. In addition, the separation experiments of Re/U replied that PIL gel could effectively separate Re(VII) from the simulated uranium leaching solution. Regeneration experiments present the good reusability of PIL gel. This work demonstrated the practical application of EB-radiation technology in the synthesis of PIL gel, which is a promising adsorbent for Re(VII) and U(VI) recovery .

Preparation of new modified silica gel terminated with phenylphosphonic acid-amide moieties for adsorption of uranium(VI) from aqueous solutions

PAMAM dendrimers modified silica gel terminated phenylphosphonic acid-amide moieties (Si-6G PAMAM-PPAAM) was prepared for uranium(VI) adsorption from aqueous solutions by batch and fixed-bed column methods. The experimental results showed that the maximum capacity was 434.78 mg g−1. Equilibrium isotherm data obeyed Langmuir isotherm model. Kinetic adsorption followed pseudo-second order model and thermodynamic parameters implied the adsorption was spontaneous, endothermic. The adsorption performance of the new adsorbent toward uranium using fixed-bed column method was also investigated. The investigated adsorbent (Si-6G PAMAM-PPAAM) was successfully used to extract uranium from leach liquor of granitic rock sample.

Synthesis and characterization of chitosan-vermiculite-lignin ternary composite as an adsorbent for effective removal of uranyl ions from aqueous solution: Experimental and theoretical analyses

Chitosan (Ch), vermiculite (V) and lignin (L) were used as the components of a natural composite adsorbent (Ch-VL) for the removal of the UO₂²⁺ ions in aqueous solutions. During the study, we recorded and analyzed the initial UO₂²⁺ ion concentration, initial pH, contact time, temperature, and recovery. The recycling performance of the Ch-VL composite was assessed by three sequential adsorption/desorption experiments. Adsorption performance of the Ch-VL composite for UO₂²⁺ ions was 600 mg L^-1 at pH 4.5 and temperature of 25 °C. Thermodynamic findings, ΔH⁰:28.1 kJ mol^-1, and ΔG⁰:-14.1 kJ mol^-1 showed that adsorption behavior was endothermic and spontaneous. Its maximum adsorption capacity was 0.322 mol kg^-1, obtained from the Langmuir isotherm model. The adsorption kinetics indicated that it followed the pseudo-second-order and intraparticle diffusion rate kinetics. The adsorption thermodynamic shown indicated that the UO₂²⁺ ion adsorption was both spontaneous and endothermic. The adsorption process was enlightened by FT-IR and SEM-EDX analyses. The study suggested a simple and cost-effective approach for the removal of toxic UO₂²⁺ ions from wastewater. To highlight the adsorption mechanism, DFT calculations were performed. Theoretical results are in good agreement with experimental observations.

A Review: Adsorption and Removal of Heavy Metals Based on Polyamide-amines Composites

In recent years, the problem of heavy metal pollution has become increasingly prominent, so it is urgent to develop new heavy metal adsorption materials. Compared with many adsorbents, the polyamide-amine dendrimers (PAMAMs) have attracted extensive attention of researchers due to its advantages of macro-molecular cavity, abundant surface functional groups, non-toxicity, high efficiency and easy modification. But in fact, it is not very suitable as an adsorbent because of its solubility and difficulty in separation, which also limits its application in environmental remediation. Therefore, in order to make up for the shortcomings of this material to a certain extent, the synthesis and development of polymer composite materials based on PAMAMs are increasingly prominent in the direction of solving heavy metal pollution. In this paper, the application of composites based on PAMAMs and inorganic or organic components in the adsorption of heavy metal ions is reviewed. Finally, the prospects and challenges of PAMAMs composites for removal of heavy metal ions in water environment are discussed.

Preparation of novel porous Al2O3-SiO2nanocomposites via solution-freeze-drying-calcination method for the efficient removal of uranium in solution

In this work, the efficient extraction of uranium in solution using Al₂O₃-SiO₂-T was reported. Kinetics and isotherm models indicated that the removal process of uranium on Al₂O₃-SiO₂-T accorded with pseudo-second-order kinetic model and Langmuir isotherm model, which showed that the adsorption process was a uniform mono-layer chemical behavior. The maximum adsorption capacity of Al₂O₃-SiO₂-T reached 738.7 mg g^-1, which was higher than AlNaO₆Si₂(349.8 mg g^-1) and Al₂O₃-SiO₂-NT (453.1 mg g^-1), indicating that the addition of template could effectively improve the adsorption performance of Al₂O₃-SiO₂to uranium. Even after five cycles of adsorption-desorption, the removal percentage of uranium on Al₂O₃-SiO₂-T remained 96%. Besides, the extraction efficiency of uranium on Al₂O₃-SiO₂-T was 72.5% in simulated seawater, which suggested that the Al₂O₃-SiO₂-T was expected to be used for uranium extraction from seawater. Further, the interaction mechanism between Al₂O₃-SiO₂-T and uranium species was studied. The results showed that the electrostatic interaction and complexation played key roles in the adsorption process of Al₂O₃-SiO₂-T to uranium.

Phosphorous-functionalized PAMAM dendrimers supported on mesoporous silica for Zr(iv) and Hf(iv) separation

To overcome the urgency of zirconium and hafnium separation, a novel mesoporous silica sorbent (PS-G1.0-MSNs) modified with phosphorous-functionalized G1.0 PAMAM dendrimers was prepared. The adsorption and separation behaviors of PS-G1.0-MSNs adsorbent on Zr(iv) and Hf(iv) were perfromed as a function of acidity, contact time, temperature, and ion concentrations by batch sorption methods. The maximum adsorption capacities for Zr(iv) and Hf(iv) were 25.7 mg g⁻¹ and 5.36 mg g⁻¹ under optimal experimental conditions, respectively, and the separation factor β_Hf/Zr = 2.0 > 1 demonstrated that the prepared sorbent had preferential selectivity for Hf(iv) in rich Zr(iv) solution. Moreover, kinetic data indicated that the sorption process on Zr(iv) and Hf(iv) achieved equilibrium within 120 min, and followed the pseudo-first-order model with a rate-determining step. The adsorption amount increased as temperature raised from 283 K to 303 K and the isothermal data plotted with the Langmuir model was better than the Freundlich model with monolayer behavior. Thermodynamic data analysis indicated that the sorption process was spontaneous and endothermic. Furthermore, XPS analysis revealed that the metal ion adsorption was mainly induced by the chemical coordination of Zr(iv) and Hf(iv) ions with N, O, P atoms of amide and phosphate groups. The present work provides good guidelines on the design of high efficient sorbent for the separation of Hf(iv) from Zr(iv) solutions.

The adsorption and separation process of PS-G1.0-MSNs on Zr(iv) and Hf(iv).

A chitosan-based composite for adsorption of uranyl ions; mechanism, isothems, kinetics and thermodynamics

The present paper describes a green and cost-effective approach to investigate chitosan-sepiolite (Ch-Sep) composite as an adsorbent for removal of UO₂²⁺ ions in aqueous solution. The Ch-Sep composite was prepared as a beads using with two cross-linking agents: tripolyphosphate (TPP) and epichlorohydrin (ECH). Their adsorption properties for the removal of UO₂²⁺ ions in aqueous solution by batch experimental conditions were studied. The adsorptive removal processes of UO₂²⁺ ions from aqueous solution were evaluated by Langmuir, Freundlich and Dubinin-Radushkevich isotherm models, and was found to be perfectly fit to the Langmuir model (R² = 0.971). The maximum adsorption capacity was 0.220 mol kg^-1 at 25 °C from Langmuir isotherm model. Adsorption energy was 12.1 kJ mol^-1 indicating that the adsorption process was chemical. The adsorption kinetics followed the pseudo second order and intra particle diffusion models. The thermodynamics parameters of UO₂²⁺ ions removal from aqueous solution was confirmed spontaneous, endothermic and possible at higher temperatures behavior of adsorption process. The adsorption mechanism of UO₂²⁺ ions onto Ch-Sep composite beads was investigated by FT-IR and SEM analysis. These findings revealed the effectiveness and potential of the newly synthesized Ch-Sep composite beads for the removal of UO₂²⁺ ions.

In Situ Synthesis of Silver Nanoparticles on Amino-Grafted Polyacrylonitrile Fiber and Its Antibacterial Activity

In this study, amino hyperbranched polymers (HBP)-grafted polyacrylonitrile (PAN) fiber was prepared through an amidation reaction in an autoclave. The prepared PAN-G-HBP fiber can complex Ag⁺ through amino groups of amino HBP, and in a hot steaming condition, Ag⁺ can be converted to Ag0 through the reducibility of HBP. PAN-G-HBP and Ag nanoparticles (NPs)-coated fibers were then characterized through FTIR, UV-VIS DRS, FE-SEM, EDS, XPS and antibacterial measurement. FTIR results confirmed HBP was grafted on the surface of PAN fiber. FE-SEM showed that after grafting with HBP, the average diameter of PAN fibers was amplified. EDS, XPS, and UV-VIS DRS method indicated that under hot steaming condition and with the reducibility of HBP, Ag NPs uniform coating on the PAN-G-HBP. Ag NPs-coated fibers exhibits excellent antibacterial property against Escherichia coli and Staphylococcus aureus. Even under 20 times home washing conditions, the antibacterial reduction of Ag NPs-coated PAN fiber can achieved more than 98.94%.

Unexpected ultrafast and highly efficient removal of uranium from aqueous solutions by a phosphonic acid and amine functionalized polymer adsorbent

P(DMAA–B2MP) was prepared by solvothermal polymerization and exhibits fast and efficient sorption of uranium(vi) from aqueous solutions.

Porous biochar modified with polyethyleneimine (PEI) for effective enrichment of U(VI) in aqueous solution

This study investigated the modification of moso bamboo biochar with polyethyleneimine (PEI) for the efficient enrichment of U(VI) in aqueous solution. The alkali/acid treated biochars with amine groups (PEI-alkali-biochar or PEI-acid-biochar) were characterized by SEM, BET, TGA, FTIR and XPS. The effects of contact time, U(VI) concentration, pH and ionic strength on U(VI) adsorption by PEI-alkali/acid-biochar were studied. U(VI) adsorption process on PEI-alkali/acid-biochar obeys pseudo-second-order model. Intraparticle diffusion model was used to investigate the controlled factors of the adsorption process. The fitting of Langmuir model gives the maximum adsorption capacities of 212.7 mg/g for PEI-alkali-biochar and 185.6 mg/g for PEI-acid-biochar, which are almost 9-10 times higher than that of pristine biochar (20.1 mg/g). The thermodynamic parameters illustrate that U(VI) adsorption on PEI-alkali/acid-biochar is an exothermic and spontaneous process. The FTIR and XPS analyses imply that U(VI) adsorption by PEI-alkali/acid-biochar is mainly controlled by complexation between U(VI) and amine groups. PEI-alkali/acid-biochar could be considered as a low-cost and outstanding material for U(VI) removal from radionuclide wastewater in practical application.

Nonreductive biomineralization of uranium by Bacillus subtilis ATCC-6633 under aerobic conditions

Nonreductive biomineralization of uranium is a promising methodology for the removal of uranium contamination as it provides stable products and wide applications. However, the efficiency of mineralization has become a major obstacle for the removal of uranium contamination by this technology, and the mineralizing process still remains largely obscure. To solve this problem in a practical way, we report a fast nonreductive biomineralization process of uranium by Bacillus subtilis ATCC-6633, a widespread bacterium with environmentally-friendly applications. In this system, we demonstrated that the size and crystallization degree of the obtained nonreduced biomineralized products is significantly superior to the results reported in the literature under comparable conditions. Meanwhile, combined with SEM, TEM, and FT-IR, a mineralization process of uranium transfer from the outer surface of the Bacillus subtilis ATCC-6633 to the internal has been clearly observed, which was accompanied by the evolution of amorphous U(VI) to crystalline uramphite. This work uncovers whole-process insights into the nonreductive biomineralization of uranium by Bacillus subtilis ATCC-6633, paving a new way for the rapid and sustained removal of uranium contamination.

Effective UO22+ removal from aqueous solutions using lichen biomass as a natural and low-cost biosorbent

The UO₂²⁺ biosorption properties of a lichen, Evernia prunastri, from aqueous solutions were investigated. The widely occurring lichen samples were collected from the forest in Bilecik-Turkey. The UO₂²⁺ biosorption onto lichen was characterized by FT-IR and SEM-EDX analysis techniques before and after biosorption. The effects of the solution pH, biosorbent dosage, UO₂²⁺ concentration, contact time, and temperature on UO₂²⁺ biosorption on lichen sample were studied by using the batch method. The isotherm experimental data were described using isotherm models of Langmuir, Freundlich and Dubinin Radushkevich. The maximum UO₂²⁺ biosorption capacity of the lichen sample was estimated by the Langmuir equation to be 0.270 mol kg^-1. The adsorption energy from the Dubin Radushkevich model was found to be 8.24 kJ mol^-1. Kinetic data determined that the biosorption was best described by the pseudo-second-order kinetic model. Thermodynamic findings showed that the biosorption process was endothermic, entropy increased and spontaneous. In conclusion, the lichen appears to be a promising biosorbent for the removal of UO₂²⁺ ions from aqueous solutions because of high biosorption capacity, easy usability, low cost, and high reusability performance.

A magnetized fungal solid-phase extractor for the preconcentrations of uranium(VI) and thorium(IV) before their quantitation by ICP-OES

The fungus Bovista plumbea immobilized on γ-Fe₂O₃ nanoparticles is shown to be a novel sorbent for magnetic solid-phase extractions of U(VI) and Th(IV). The biosorbent was characterized by FT-IR, SEM, and EDX. The effects of pH value, flow rate and volume of sample, amounts of biomass and support material, eluent type, foreign ions and repeated use of the sorbent on extraction efficiency were investigated. The sorption capacities are 41 and 44 mg g^-1, respectively, for U(VI) and Th(IV). The results indicated that B. plumbea immobilized onto γ-Fe₂O₃ nanoparticles can be utilized as a novel material for the preconcentrations of U(VI) and Th(IV) in certified materials and in spiked tap, river and lake waters. Graphical abstract Schematic presentation of a method for preconcentrations of Th(IV) and U(VI) ions using γ-Fe₂O₃ nanoparticles loaded with the fungus Bovista plumbea.

Preparation of chitosan functionalized polyamidoamine for the separation of trivalent lanthanides from acidic waste solution

The manuscript deals with the sorption of Am(III) and Eu(III) from pH medium using chitosan functionalized with dendrimer like polyamidoamine (PAMAM) polymers up to third generation. The PAMAM polymers were introduced into chitosan by two step processes and were characterized by various instrumental techniques like FTIR, XRD, TG-DTA. The sorption process was highly pH dependent for both Am(III) and Eu(III) with increasing trend for higher pH of the solution. Kinetics of equilibration was found to be fast with equilibrium attained in 10 min for both the metal ions. Pseudo 2nd order kinetics mechanism was found to be followed for both Am(III) and Eu(III). The sorption process of Eu(III) was found to fit the Langmuir isotherm model with maximum sorption capacity of 6.01 mg/g. There was no effect on the generation of PAMAM Dendron on the efficiency, kinetics or sorption capacity for Am(III) as well as Eu(III). The synthesized different generation of PAMAM functionalized chitosan is a promising material for removal of actinides and lanthanides from waste water solution.

Adsorption of Uranium(VI) from Aqueous Solution by Modified Rice Stem

The biosorption is an effective and economical method to deal with the wastewater with low concentrations of uranium. In this study, we present a systematic investigation of the adsorption properties, such as the kinetics, thermodynamics, and mechanisms, of modified rice stems. The rice stems treated with 0.5 mol/L NaOH solutions show higher removal percentage of uranium than those unmodified under the conditions of initial pH (pH = 4.0), absorbent dosage (5–8 g/L), temperature (T = 298 K), and adsorption equilibrium time (t = 180 min). The removal percentage of uranium(VI) decreases with increasing initial concentration of uranium(VI). The Langmuir isotherm model, which suggests predominant monolayered sorption, is better than Freundlich and Temkin models to elucidate the adsorption isotherm of adsorbed uranium. Kinetic analyses indicate that the uranium(VI) adsorption of the modified rice stem is mainly controlled by surface adsorption. The pseudo-second-order kinetic model, with the correlation coefficient of R2 = 0.9992, fits the adsorption process much better than other kinetic models (e.g., pseudo-second-order kinetic model, Elovich kinetic model, and intraparticle diffusion model). The thermodynamic parameters ΔG0, ΔH0, and ΔS0 demonstrate that the adsorption of uranium(VI) is an endothermic and spontaneous process, which can be promoted by temperature. The adsorption of uranium can change the morphology and the structure characteristics of the modified rice stem through interaction with the adsorption sites, such as O-H, C=O, Si=O, and P-O on the surface.

Removal and recovery of uranium(VI) by waste digested activated sludge in fed-batch stirred tank reactor

This study demonstrated the removal and recovery of uranium(VI) in a fed-batch stirred tank reactor (STR) using waste digested activated sludge (WDAS). The batch adsorption experiments showed that WDAS can adsorb 200 (±9.0) mg of uranium(VI) per g of WDAS. The maximum adsorption of uranium(VI) was achieved even at an acidic initial pH of 2.7 which increased to a pH of 4.0 in the equilibrium state. Desorption of uranium(VI) from WDAS was successfully demonstrated from the release of more than 95% of uranium(VI) using both acidic (0.5 M HCl) and alkaline (1.0 M Na₂CO₃) eluents. Due to the fast kinetics of uranium(VI) adsorption onto WDAS, the fed-batch STR was successfully operated at a mixing time of 15 min. Twelve consecutive uranium(VI) adsorption steps with an average adsorption efficiency of 91.5% required only two desorption steps to elute more than 95% of uranium(VI) from WDAS. Uranium(VI) was shown to interact predominantly with the phosphoryl and carboxyl groups of the WDAS, as revealed by in situ infrared spectroscopy and time-resolved laser-induced fluorescence spectroscopy studies. This study provides a proof-of-concept of the use of fed-batch STR process based on WDAS for the removal and recovery of uranium(VI).

Graphene-synergized 2D covalent organic framework for adsorption: A mutual promotion strategy to achieve stabilization and functionalization simultaneously

Most of current absorbents are difficult to hold favorable stability and functionality simultaneously when used in condition of high acidity and strong radiation existing in nuclear industry. Herein, a new graphene-synergized 2D covalent organic framework (GS-COF) was obtained via an in-situ loading of a covalent organic framework (TDCOF) on graphene sheets based on a mutual promotion strategy proposed in this work. The corresponding oximation products, o-GS-COF, and also o-TDCOF as a reference object, were respectively prepared subsequently. The results of experiments confirmed that o-GS-COF possesses better acid and irradiation stability than that of o-TDCOF. Adsorption experiments showed that the adsorption capacity of o-GS-COF for uranium is 144.2 mg g^-1, higher than that of GO (92.5 mg g^-1) and o-TDCOF (105.0 mg g^-1), and the maximum adsorption capacity reaches 220.1 mg g^-1. In the multi-ions system, o-GS-COF also displayed good selective adsorption property for uranium with SF_U/M 35-100 for 5 coexisting divalent metal ions and 14-18 for 5 coexisting trivalent lanthanide ions. The proposed strategy successfully achieved the synergistic improvement of both stability and functionality for the desired adsorbing materials and is of considerable practical utility in the field of design and preparation of reliable high-performance absorbents.

Design and synthesis of core-shell Fe3O4@PTMT composite magnetic microspheres for adsorption of heavy metals from high salinity wastewater

In this study, a novel magnetic nanoparticles (MNP) modified by an organodisulfide polymer (PTMT) was designed for adsorption of heavy metals (Hg(II), Pb(II) and Cd(II)) from simulated coal chemical high salinity wastewater. The MNP-PTMT nano-composite was synthesize and characterized by SEM, TEM, FTIR, BET, VSM, TGA and XRD. The results indicate that the wanted MNP-PTMT magnetic nanoparticles were successfully obtained by modification. Adsorption experiments were systematically carried out to evaluate the performance of the obtained nanoparticles and to build up the adsorption models. The results demonstrate that the adsorption kinetic and isotherms thermodynamic followed the pseudo-second-order model and the Freundlich equation, respectively. In the presence of the inorganic salt in high salinity wastewater, the adsorption efficiency of MNP-PTMT for heavy metals was still excellent. The magnetic adsorbent could be recovered from aqueous solution by an external magnetic field in 20s and the subsequent regeneration of Hg(II)/Pb(II) loaded MNP-PTMT can be efficiently achieved by using EDTA-2Na solution as desorbent. The novel MNP-PTMT nanoparticles could be used reproductively for five times without apparent decrease in sorption capacity.

Fabrication of graphene oxide polymer composite particles with grafted poly(amidoamine) dendrimers and their application in ion chromatography

Graphene oxide polymer composite particles with grafted PAMAM dendrimers and their application in ion chromatography.

Surface Engineering of PAMAM-SDB Chelating Resin with Diglycolamic Acid (DGA) Functional Group for Efficient Sorption of U(VI) and Th(IV) from Aqueous Medium

A novel chelating resin obtained via growth of PAMAM dendron on surface of styrene divinyl benzene resin beads, followed by diglycolamic acid functionalization of the dendrimer terminal. Batch experiments were conducted to study the effects of pH, nitric acid concentration, amount of adsorbent, shaking time, initial metal ion concentration and temperature on U(VI) and Th(IV) adsorption efficiency. Diglycolamic acid terminated PAMAM dendrimer functionalized styrene divinylbenzene chelating resin (DGA-PAMAM-SDB) is found to be an efficient candidate for the removal of U(VI) and Th(IV) ions from aqueous (pH >4) and nitric acid media (>3M). The sorption equilibrium could be reached within 60min, and the experimental data fits with pseudo-second-order model. Langmuir sorption isotherm model correlates well with sorption equilibrium data. The maximum U(VI) and Th(IV) sorption capacity onto DGA-PAMAMG₅-SDB was estimated to be about 682 and 544.2mgg^-1 respectively at 25°C. The interaction of actinides and chelating resin is reversible and hence, the resin can be regenerated and reused. DFT calculation on the interaction of U(VI) and Th(IV) ions with chelating resin validates the experimental findings.

Optimization of uranyl ions removal from aqueous solution by natural and modified kaolinites

The paper addresses the modifications of the most common mineral clay “kaolinite” for U(VI) removal from aqueous solutions. A new modified Egyptian natural kaolinite (Ca-MK) was prepared by coating kaolinite with calcium oxide. Another modification process was utilized by calcination and acid activation of kaolinite (E-MK). The Egyptian natural kaolinite (E-NK) and the two modified kaolinites were characterized by different techniques SEM, EDX, XRD, and FTIR. The removal process were investigated in batch experiments as a function of pH, contact time, initial U(VI) concentration, effect of temperature, and recovery of U(VI) were studied. The equilibrium stage was achieved after 60 min and the kinetic data was described well by pseudo-second order model. Isothermal data was better described by the Langmuir isotherm model, indicating the homogeneous removal process. Also the removal process was studied on different temperature 293, 313, and 323 K. The thermodynamic parameters ΔH°, ΔS°, and ΔG° were calculated. The thermodynamic results pointed to the endothermic and favorable nature of the U(VI) removal process in the three kaolinite adsorbents. This study indicated that (Ca-MK) has higher CEC and can be used as a new adsorbent for highly efficient removal of U(VI) from aqueous solutions.

Adsorption of precious metals in water by dendrimer modified magnetic nanoparticles

Magnetic nanoparticles modified by third-generation dendrimers (MNP-G3) and MNP-G3 further modified by ethylenediaminetetraacetic acid (EDTA) (MNP-G3-EDTA) were conducted to investigate their ability for recovery of precious metals (Pd(IV), Au(III), Pd(II) and Ag(I)) in water. Experiments were carried out using batch reactors for the studies of adsorption kinetics, adsorption isotherms, competitive adsorption and regeneration. The pseudo second-order model is the best-fit model among others suggesting that the adsorption of precious metals by MNP-G3 in water is a chemisorption process. Three adsorption isotherms namely Langmuir, Freundlich and Dubinin-Radushkevich isotherm were examined and the results showed the similarities and consistency of both linear and nonlinear analyses. Pd(IV) and Au(III) with higher valence exhibited relatively better adsorption efficiency than Pd(II) and Ag(I) with lower valence suggesting that the adsorption of precious metals by MNP-G3 is a function of valence. In the presence of the competing ion Zn(II), the adsorption efficiency of MNP-G3 for all four precious metals was declined significantly. The use of MNP-G3-EDTA revealed an increase in the adsorption efficiency for all four precious metals. However, the low selectivity of MNP-G3 towards precious metals was not enhanced by the modification of EDTA onto the MNP-G3. The regeneration of metal-laden MNP-G3 can be readily performed by using 1.0% HCl solution as a desorbent solution.

Melamine modified graphene hydrogels for the removal of uranium(vi) from aqueous solution

Melamine-modified graphene hydrogels (MA–GH) were successfully synthesized through a simple one-step method.

The application of iron-based technologies in uranium remediation: A review

Remediating uranium contamination is of worldwide interest because of the increasing release of uranium from mining and processing, nuclear power leaks, depleted uranium components in weapons production and disposal, and phosphate fertilizer in agriculture activities. Iron-based technologies are attractive because they are highly efficient, inexpensive, and readily available. This paper provides an overview of the current literature that addresses the application of iron-based technologies in the remediation of sites with elevated uranium levels. The application of iron-based materials, the current remediation technologies and mechanisms, and the effectiveness and environmental safety considerations of these approaches were discussed. Because uranium can be reduced and reoxidized in the environment, the review also proposes strategies for long-term in situ remediation of uranium. Unfortunately, iron-based materials (nanoscale zerovalent iron and iron oxides) can be toxic to microorganisms. As such, further studies exploring the links among the fates, ecological impacts, and other environmentally relevant factors are needed to better understand the constraints on using iron-based technologies for remediation.