Capsid protein oxidation in feline calicivirus using an electrochemical inactivation treatment

Towards attaining SDG 6: The opportunities available for capacitive deionization technology to provide clean water to the African population

The unavailability of clean water caused by population growth, increased industrial activities, and global climate change is a major challenge in many communities. A number of desalination technologies including distillation, reverse osmosis and electrodialysis, have been used to supplement the available water resources. However, these technologies are energy intensive and demand a significant financial commitment. Capacitive deionization (CDI) is an emerging desalination technology which is promising to provide water at a reasonable cost, especially in societies with limited incomes such as those in Africa. The opportunities for CDI to provide clean water to the African population are discussed in this paper. These opportunities include electrosorption at low potential, low energy consumption, large quantities of agricultural wastes for the production of electrode materials, high sunshine irradiation throughout the year, suitability for disinfection and defluoridation and its applications in the removal of heavy metals and emerging pollutants. Due to the existence of numerous enabling conditions, the analysis from this paper demonstrates that CDI can be a dependable method to provide clean water in Africa.

Recent advances on inactivation of waterborne pathogenic microorganisms by (photo) electrochemical oxidation processes: Design and application strategies

Compared with other conventional water disinfection processes, (photo) electrochemical oxidation (P/ECO) processes have the characteristics of environmental friendliness, convenient installation and operation, easy control and high efficiency of inactivating waterborne pathogenic microorganisms (PMs), so that more and more research work has been focused on this topic, but there is still a huge gap between the research and practical application. Here, the research network of inactivating PMs by P/ECO processes has been comprehensively summarized, and the electrode/reactor/process design strategies based on strengthening direct and indirect oxidation, enhancing mass transfer efficiency and electron transfer efficiency, and improving the effective dose of electrogenerated oxidants are discussed. Furthermore, the factors affecting the inactivation of PMs and the issues regarding to stability and lifetime of the electrode are discussed respectively. Finally, the important research priorities and possible research challenges of P/ECO processes are put forward to make significant progress of this technology.

The occurrence and control of waterborne viruses in drinking water treatment: A review

As the coronavirus disease 2019 continues to spread globally, its culprit, the severe acute respiratory syndrome coronavirus 2 has been brought under scrutiny. In addition to inhalation transmission, the possible fecal-oral viral transmission via water/wastewater has also been brought under the spotlight, necessitating a timely global review on the current knowledge about waterborne viruses in drinking water treatment system - the very barrier that intercepts waterborne pathogens to terminal water users. In this article we reviewed the occurrence, concentration methods, and control strategies, also, treatment performance on waterborne viruses during drinking water treatment were summarized. Additionally, we emphasized the potential of applying the quantitative microbial risk assessment to guide drinking water treatment to mitigate the viral exposure risks, especially when the unregulated novel viral pathogens are of concern. This review paves road for better control of viruses at drinking water treatment plants to protect public health.

A disposable electrochemical sensor based on electrospinning of molecularly imprinted nanohybrid films for highly sensitive determination of the organotin acaricide cyhexatin

Nanofibrous polyporous membranes imprinted with cyhexatin (CYT) were formed via the ordered distribution of the imprints in electrospun nanofibers. The MIPs have a high mass transfer rate and enhanced adsorption capacity. In addition, a printed carbon electrode with enhanced sensitivity was developed via electrochemical fabrication of reduced graphene oxide (rGO) and gold nanoparticles (AuNPs). The molecularly imprinted sensor exhibits excellent selectivity and sensitivity for CYT. The structure and morphology of the nanohybrid films were characterized by using scanning electron microscopy, atomic force microscopy and chronoamperometry. The sensing performances were evaluated by cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy by using hexacyanoferrate(IV) as an electrochemical probe. The electrode, best operated at a working potential of around 0.16 V (vs. Ag/AgCl), has a linear response in the 1-800 ng mL^-1 CYT concentration range and a detection limit of 0.17 ng mL^-1 (at S/N = 3). The sensor demonstrated satisfactory recoveries when applied to the determination of CYT in spiked pear samples. Graphical abstract Schematic presentation of the electrochemical sensor for detection of CYT.

Inactivation, lysis and degradation by-products of Saccharomyces cerevisiae by electrooxidation using DSA

The yeast Saccharomyces cerevisiae, a microorganism with cell walls resistant to many types of treatments, was chosen as a model to study electrochemical disinfection process using dimensionally stable anodes (DSA). DSA electrodes with nominal composition of Ti/RuO₂TiO₂ and Ti/RuO₂TiO₂IrO₂ were evaluated in 0.05 mol L^-1 Na₂SO₄ containing yeast. The results showed inactivation about of 100 % of the microorganisms at Ti/RuO₂TiO₂ by applying 20 and 60 mA cm^-2 after 120 min of electrolysis, while a complete inactivation at Ti/RuO₂IrO₂TiO₂ electrode was achieved after 180 min at 60 mA cm^-2. When chloride ions were added in the electrolyte solution, 100 % of the yeast was inactivated at 20 mA cm^-2 after 120 min of electrolysis, independent of the anode used. In the absence of chloride, the energy consumption (EC) was of 34.80 kWh m^-3, at 20 mA cm^-2 by using Ti/RuO₂TiO₂ anode. Meanwhile, in the presence of chloride, EC was reduced, requiring 30.24 and 30.99 kWh m^-3 at 20 mA cm^-2, for Ti/RuO₂TiO₂ and Ti/RuO₂IrO₂TiO₂ electrodes, respectively, The best performance for cell lysis was obtained in the presence of chloride with EC of 88.80 kWh m^-3 (Ti/RuO₂TiO₂) and 91.85 kWh m^-3 (Ti/RuO₂IrO₂TiO₂) to remove, respectively, 92 and 95 % of density yeast. The results clearly showed that yeast, as a model adopted, was efficiently inactivated and lysed by electrolysis disinfection using DSA-type electrodes.

Dose and Size-Dependent Antiviral Effects of Silver Nanoparticles on Feline Calicivirus, a Human Norovirus Surrogate

OBJECTIVES

Silver nanoparticles (AgNPs) as antibacterial agents are incorporated in many consumer products, while the use as antiviral agents is an ongoing area of research. We evaluated the antiviral properties of AgNPs of variable sizes (10, 75, and 110 nm) and doses (25, 50, and 100 μg/mL) at different contact time points against feline calicivirus (FCV), a surrogate for norovirus.

MATERIALS AND METHODS

Antiviral effects of the AgNPs were determined by comparing the infectivity of FCV, the appearance of cytopathic effects (CPEs), and the integrity of the viral capsid protein in viral suspension treated with AgNPs with the untreated controls.

RESULTS

The 10 nm AgNPs at 50 and 100 μg/mL concentrations inactivated the FCV beyond the limit of detection, resulting in a decrease of up to 6.5 log10 viral titer, prevented development of CPEs, and reduction in the western blot band signal of the viral capsid protein. No significant antiviral effect was observed for the 75 and 110 nm AgNPs. Conclusions and Applications: These results demonstrate that the antiviral effects of AgNPs are both size and dose dependent, thus potential applications of AgNPs as antiviral agents to prevent contamination of foodborne viruses need to consider size and dose effects.