Fabrication and characterization of PbO2 electrode modified with [Fe(CN)6](3-) and its application on electrochemical degradation of alkali lignin

Electrochemical degradation of Cephalexin on Ti/TiO2/βPbO2 anode modified by sodium dodecyl sulfate

The possible environmental dangers of antibiotics include excessive use, wastewater discharge, and resistance to biodegradability. Therefore, efficient and environmentally friendly methods to remove such pollutants are necessary to preserve global ecosystems and human life. Electrochemical oxidation using lead-based electrodes is an effective approach for the treatment of resistant organic pollutants. In this research, a Ti/TiO2-βPbO2 electrode was synthesized for the electrochemical degradation of Cephalexin. To increase the efficiency and stability of the electrode, βPbO2 electrodeposition was performed in the presence of sodium dodecyl sulfate. The performance of the electrode in the degradation and mineralization of Cephalexin was evaluated using cyclic voltammetry and differential pulse voltammetry, and the maximum degradation efficiency and maximum COD removal of 97.60% and 70.27%, respectively, were obtained. In addition, the degradation mechanism was studied using liquid chromatography coupled with tandem mass spectrometry. The findings indicated that the Ti/TiO2-βPbO2 electrode exhibited desirable electrocatalytic performance in the degradation and mineralization of Cephalexin. Therefore, wastewater contaminated with antibiotic residues can be treated before discharging into the sewage system and the environment by this approach.

Electrocatalytic biomass upgrading coupled with hydrogen evolution and CO2 reduction

Clean energy production and CO2 utilization have attracted increasing interest. Electrocatalysis represents an effective way to produce green hydrogen from water and reduce CO2 to valuable compounds. However, for either the hydrogen evolution reaction (HER) or the CO2 reduction reaction (CO2RR), the reaction efficiency is significantly limited by the slow kinetics of the oxygen evolution reaction (OER) at the anode, which consumes most of the input energy. Therefore, great efforts have been made to replace the OER with organic oxidation reactions at the anode to decrease the reaction energy barrier. Biomass has an advantage of broad source, and when it is employed as an OER alternative in the anode oxidation reactions, not only can the reduction reaction efficiency at the cathode including the HER and CO2RR be enhanced but high-value chemicals can also be obtained, representing an attractive OER alternative. This review comprehensively summarizes the recent achievements in electrocatalytic biomass upgrading coupled with the HER and CO2RR, cataloged based on the type of biomass. The design of electrocatalysts for such coupled reaction systems is discussed. Finally, the challenges and perspectives in the field of this energy-saving and value-added coupling system are provided to inspire more efforts in pushing forward the development of this field.

Empowering Sustainable Energy: Lead-Coated Plastic Chip Electrodes for Effective CO2 Reduction

Electrochemical CO2 reduction is crucial in combatting climate change and advancing sustainable energy practices by converting CO2 into valuable chemicals and fuels, thereby reducing atmospheric CO2 levels and enabling the storage and utilization of renewable energy from intermittent sources like solar and wind. The selection of electrode materials and platform design plays a critical role in enhancing reaction efficiency and product selectivity during CO2 reduction. Various metals, both in their solid forms and coated over substrates, have been used in electrochemical CO2RR. In this study, we utilized electrodeposition to modify the plastic chip electrode (PCE), depositing lead metal onto it through a galvanostatic method at a current density of 100 mA/cm2 from a 0.1 M Pb(NO3)2 aqueous solution. Pb-coated electrodes are crucial due to their high selectivity, efficiency, cost-effectiveness, and flexibility as electrode materials. Their good stability and durability make them ideal for long-term applications. The electrochemical reduction of carbon dioxide using the Pb/PCE electrode as the cathode has been investigated, focusing on assessing how different electrolysis potentials influenced the faradaic efficiency of formic acid production. Our results demonstrated that the peak faradaic efficiency, reaching 86.2%, was achieved at -0.7 V vs RHE over a 5 h electrolysis period.

Zirconium-doped lead dioxide anodes prepared by sol-gel method for ampicillin removal from simulated pharmaceutical polluted wastewater

New anodes consisting of zirconium-doped PbO2 coating, growth on titanium dioxide interlayer, were deposited on titanium substrates using spin coating method and have been tested for the removal of ampicillin, a β-lactam antibiotic, from water. Morphological, structural, and electrochemical properties of the prepared coatings were characterized by scanning electron microscopy (SEM), atomic force microscope (AFM), X-ray diffraction (XRD), and electrochemical impendence spectroscopy (EIS). Results showed that the incorporation of zirconium dopant had a noticeable modification in the morphology of anodes. An increase in the surface roughness and the specific active area were observed with Ti/TiO2/PbO2- 10% Zr electrode compared to other anodes. The electrochemical measurements indicated that the anode doped with 10% Zr showed a more protective coating performance than the undoped and 20% Zr-doped PbO2 electrodes. The experiments on ampicillin degradation revealed that doped lead dioxide anodes have excellent electrocatalytic activity. The major byproduct generated during anodic oxidation treatment has been identified as ampicilloic acid by liquid chromatography-mass spectroscopy (LC-MS) analysis. Results demonstrated that Ti/TiO2/PbO2- 10% Zr anode presents the best removal rate of ampicillin with a minimum intermediate amount, which leads to conclude that 10% is the optimum percentage of zirconium dopant for antibiotic wastewater treatment.

Principles, challenges and prospects for electro-oxidation treatment of oilfield produced water

The oil industry is facing substantial environmental challenges, especially in managing waste streams such as Oilfield Produced Water (OPW), which represents a significant component of the industrial ecological footprint. Conventional treatment methods often fail to effectively remove dissolved oils and grease compounds, leading to operational difficulties and incomplete remediation. Electrochemical oxidation (EO) has emerged as a promising alternative due to its operational simplicity and ability to degrade pollutants directly and indirectly, which has already been applied in treating several effluents containing organic compounds. The application of EO treatment for OPW is still in an initial stage, due to the intricate nature of this matrix and scattered information about it. This study provides a technological overview of EO technology for OPW treatment, from laboratory scale to the development of large-scale prototypes, identifying design and process parameters that can potentially permit high efficiency, applicability, and commercial deployment. Research in this domain has demonstrated notable rates of removal of recalcitrant pollutants (>90%), utilizing active and non-active electrodes. Electro-generated active species, primarily from chloride, play a pivotal role in the oxidation of organic compounds. However, the highly saline conditions in OPW hinder the complete mineralization of these organics, which can be improved by using non-active anodes and lower salinity levels. The performance of electrodes greatly influences the efficiency and effectiveness of OPW treatment. Various factors must be considered when selecting the electrode material, such as its conductivity, stability, surface area, corrosion resistance, and cost. Additionally, the specific contaminants present in the OPW, and their electrochemical reactivity must be considered to ensure optimal treatment outcomes. Balancing these considerations can be challenging, but it is crucial for achieving successful OPW treatment. Active electrode materials exhibit a high affinity for chloride molecules, generating more active species than non-active materials, which exhibit more significant degradation potential due to the production of hydroxyl radicals. Regarding scale-up, key challenges include low current efficiency, the formation of by-products, electrode deactivation, and limitations in mass transfer. To address these issues, enhanced mass transfer rates and appropriate residence times can be achieved using flow-through mesh anodes and moderate current densities, which have proven to be the optimal configuration for this process.

Research Progress on Lignin Depolymerization Strategies: A Review

As the only natural source of aromatic biopolymers, lignin can be converted into value-added chemicals and biofuels, showing great potential in realizing the development of green chemistry. At present, lignin is predominantly used for combustion to generate energy, and the real value of lignin is difficult to maximize. Accordingly, the depolymerization of lignin is of great significance for its high-value utilization. This review discusses the latest progress in the field of lignin depolymerization, including catalytic conversion systems using various thermochemical, chemocatalytic, photocatalytic, electrocatalytic, and biological depolymerization methods, as well as the involved reaction mechanisms and obtained products of various protocols, focusing on green and efficient lignin depolymerization strategies. In addition, the challenges faced by lignin depolymerization are also expounded, putting forward possible directions of developing lignin depolymerization strategies in the future.

PANI/GO and Sm co-modified Ti/PbO2 dimensionally stable anode for highly efficient amoxicillin degradation: Performance assessment, impact parameters and degradation mechanism

The abuse and uncontrolled discharge of antibiotics present a severe threat to environment and human health, necessitating the development of efficient and sustainable treatment technology. In this work, we employ a facile one-step electrodeposition method to prepare polyaniline/graphite oxide (PANI/GO) and samarium (Sm) co-modified Ti/PbO2 (Ti/PbO2-PANI/GO-Sm) electrode for the degradation of amoxicillin (AMX). Compared with traditional Ti/PbO2 electrode, Ti/PbO2-PANI/GO-Sm electrode exhibits more excellent oxygen evolution potential (2.63 V) and longer service life (56 h). In degradation experiment, under optimized conditions (50 mg L-1 AMX, 20 mA cm-2, pH 3, 0.050 M Na2SO4, 25 °C), Ti/PbO2-PANI/GO-Sm electrode achieves remarkable removal efficiencies of 88.76% for AMX and 79.92% for chemical oxygen demand at 90 min. In addition, trapping experiment confirms that ·OH plays a major role in the degradation process. Based on theoretical calculation and liquid chromatography-mass spectrometer results, the heterocyclic portion of AMX molecule is more susceptible to ·OH attacks. Thus, this novel electrode offers a sustainable and efficient solution to address environmental challenges posed by antibiotic-contaminated wastewater.

One-step synthesis of Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes used to degrade nitrobenzene

Ti/SnO2-Sb electrodes possess high catalytic activity and efficiently degrade nitrobenzene (NB); however, their low service life limits their wide application. In this study, we used one-step hydrothermal synthesis to successfully prepare Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were applied to characterize the surface morphology, microstructure, and chemical composition of the electrodes, respectively. The electrochemical activity and stability of the electrodes were characterized via linear sweep and cyclic voltammetry, electrochemical impedance spectroscopy, and an accelerated service life test; their performance for NB degradation was also studied. An appropriate amount of Pt-Nd co-doping refined the average grain size of SnO2 and formed a uniform and compact coating on the electrode surface. The oxygen evolution potential, total voltammetric charge, and electron transfer resistance of the Ti/SnO2-Sb-Nd-Pt electrodes were 1.88 V, 3.77 mC/cm2, and 11.50 Ω, respectively. Hydroxy radical was the main active radical species during the electrolytic degradation of nitrobenzene with Ti/SnO2-Sb-Nd-Pt. After Pt-Nd co-doping, the accelerated service life of the electrodes was extended from 8.0 min to 78.2 h (500 mA/cm2); although the NB degradation rate decreased from 94.1 to 80.6%, the total amount of theoretical catalytic degradation of NB in the effective working time increased from 17.4 to 8754.1 mg/cm2. These findings reveal good application potential for the electrodes and provide a reference for developing efficient and stable electrode materials.

Catalytic electrodes' characterization study serving polluted water treatment: environmental healthcare and ecological risk assessment

Pesticide residues in the environment have irreparable effects on human health and other organisms. Hence, it is necessary to treat and degrade them from polluted water. In the current work, the electrochemical removal of the fenitrothion (FT), trifluralin (TF), and chlorothalonil (CT) pesticides were performed by catalytic electrode. The characteristics of SnO2-Sb2O3, PbO2, and Bi-PbO2 electrodes were described by FE-SEM and XRD. Dynamic electrochemical techniques including cyclic voltammetry, electrochemical impedance spectroscopy, accelerated life, and linear polarization were employed to investigate the electrochemical performance of fabricated electrodes. Moreover, evaluate the risk of toxic metals release from the catalytic electrode during treatment process was investigated. The maximum degradation efficiency of 99.8, 100, and 100% for FT, TF, and CT was found under the optimal condition of FT, TF, and CT concentration 15.0 mg L-1, pH 7.0, current density 7.0 mA cm-2, and electrolysis time of 120 min. The Bi-PbO2, PbO2, and SnO2-Sb2O3 electrodes revealed the oxygen evolution potential of 2.089, 1.983, 1.914 V, and the service lifetime of 82, 144, and 323 h, respectively. The results showed that after 5.0 h of electrolysis, none of the heavy metals such as Bi, Pb, Sb, Sn, and Ti were detected in the treated solution.

Electrochemical oxidation of chloramphenicol by modified Sm-PEG-PbO2 anodes: Performance and mechanism

Chloramphenicol (CAP) is used extensively in industry and daily life, but its abuse has seriously affected the environment and public health. In this paper, a new composite PbO₂ electrode was obtained through the modification Sm and polyethylene glycol (PEG), and an electrocatalytic oxidation technology of CAP degradation was investigated. The results showed that the catalytic degradation ability and industrial service life of the PEG-Sm-PbO₂ composite electrode were significantly enhanced. Co-doping inhibited the growth of grains, resulting in the formation of refined pyramidal grains on the surface of the electrode, which increased the number of active spots. The industrial service life of the modified electrode was improved by 87.0%. In addition, the degradation effect under different conditions and mechanism of CAP were also explored. The optimal conditions for CAP degradation were explored, at which time the CAP degradation rate reached 99.1%. The degradation process was in accordance with the primary reaction kinetics, and the apparent rate constant of CAP at the PEG-Sm-PbO₂ electrode was raised by 57.1% in comparison with the unmodified electrode, indicating that the modification facilitated the degradation of CAP in the electrode. Finally, two possible CAP degradation pathways were deduced. The results will provide technical support and a theoretical basis for the degradation of persistent organic pollutants.

Allyl halide induced electrochemical degradation of lignin into double-bonded phenolic monomers

Lignin is one of the major macromolecule in nature that contains an aromatic ring structure, and also a potential source of high-value products such as biofuels and chemicals. However, Lignin is a kind of complex heterogeneous polymer which can produce many degradation products during processing or treatment. These degradation products are difficult to separate, making it challenging to use lignin directly for high-value applications. This study proposes an electrocatalytic method to degrade lignin by using allyl halides to induce double-bonded phenolic monomers, while avoiding separation. In an alkaline solution, the three basic structural units (G, S, and H) of lignin were transformed into phenolic monomers by introducing allyl halide, which could effectively expand lignin application space. This reaction was achieved using a Pb/PbO₂ electrode as the anode and copper as the cathode. It was further confirmed that double-bonded phenolic monomers were obtained by degradation. 3-allylbromide has more active allyl radicals and significantly higher product yields than 3-allylchloride. The yields of 4-allyl-2-methoxyphenol, 4-allyl-2,6-dimethoxyphenol and 2-allylphenol could reach 17.21 g/kg-lignin, 7.75 g/kg-lignin, and 0.67 g/kg-lignin respectively. These mixed double-bond monomers can be used as monomer materials for in-situ polymerization without further separation, which lays the foundation for high value-added applications of lignin.

Preparation of Ti/SnO2-Sb/La-βPbO2 electrode and its application in the degradation of some pollutants including prednisolone and 8-Hydroxyquinoline

In this work, a novel La-doped βPbO₂ (Ti/SnO₂-Sb/La-βPbO₂) was prepared using electrodeposition method and applied to the degradation of prednisolone (PRD), 8-Hydroxyquinoline (8-HQ), and other typical organic pollutants. Compared with the conventional electrode Ti/SnO₂-Sb/βPbO₂, La₂O₃ doping enhanced oxygen evolution potential (OEP), reactive surface area, stability and repeatability of the electrode. The 10 g L^-1 of La₂O₃ doping exhibited the highest electrochemical oxidation capability of the electrode with [•OH]ss being determined at 5.6 × 10^-13 M. The quenching experiments were conducted to confirm the main oxidizing species (here: •OH) in the electrochemical process. The study showed that the pollutants were removed in the electrochemical (EC) process with different degradation rates and indicated that the second-order rate constant of organic pollutants towards •OH (k_OP,•OH) has a linear relationship with the degradation rate of organic pollutants (k_OP) in the electrochemical process. Another new finding in this work is that a regression line of k_OP,•OH and k_OP can be used to estimate k_OP,•OH of an organic chemical, which cannot be determined using the competition method. k_PRD,•OH and k_8-HQ,•OH were determined to be 7.4 × 10⁹ M^-1 s^-1 and (4.6-5.5) × 10⁹ M^-1 s^-1, respectively. Compared with conventional supporting electrolyte (like SO₄^2-), H₂PO₄^- and HPO₄^2- improved k_PRD and k_8-HQ by 1.3-1.6-fold, while SO₃^2- and HCO₃^- inhibited k_PRD and k_8-HQ significantly, down to 80%. Additionally, the degradation pathway of 8-HQ was proposed based on the detection of intermediates from GC-MS.

Iron (III)-doped PbO2 and its application as electrocatalyst for decomposition of phthalocyanine dye

The textile industry contributes significantly to environmental pollution through dyeing and finishing processes that release dyes into wastewater. Even small amounts of dyes can have harmful effects and cause negative impacts. These effluents have carcinogenic, toxic, and teratogenic properties and can take a long time to be naturally degraded through photo/bio-degradation processes. This work investigates degradation of Reactive Blue 21 (RB21) phthalocyanine dye using anodic oxidation process with PbO₂ anode doped with iron III (0.1 M) (marked as Ti/PbO₂-0.1Fe) and compared with pure PbO₂. Ti/PbO₂ films with and without doping were successfully prepared by electrodeposition technology on Ti substrates. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDS) was used to characterize the electrode morphology. Also, linear scanning voltammetry (LSV) and cyclic voltammetry (CV) tests were conducted to investigate the electrochemical response of these electrodes. The influence of operational variables on the mineralization efficiency was studied as a function of pH, temperature, and current density. Doping Ti/PbO₂ with Fe³⁺ (0.1 M) could reduce the particle to a smaller dimension and slightly increase the oxygen evolution potential (OEP). A large anodic peak was found for both electrodes prepared in the CV test, indicating that oxidation of the RB21 dye was easily achieved on the surface of the prepared anodes. No significant effect of initial pH on the mineralization of RB21 was observed. RB21 decolorization was more rapid at room temperature and increases with increasing current density. A possible degradation pathway for the anodic oxidation of RB21 in aqueous solution is proposed based on the identified reaction products. In general, it can be said that from the findings it was observed that the Ti/PbO₂ and Ti/PbO₂-0.1Fe electrodes show good performance on RB21 degradation. However, it was noted that the Ti/PbO₂ electrode tends to deteriorate over time and exhibits poor substrate adhesion, while the Ti/PbO₂-0.1Fe electrode displays superior substrate adhesion and stability.

Oxidative C−C bond cleavage of lignin via electrocatalysis

Lignin, which is an important component of biomass in nature and is constantly produced in industry, becomes potential raw material for sustainable production of fine chemicals and biofuels. Electrocatalysis has been extensively involved in the activation of simple molecules and cleavage-recasting of complex scaffolds in an elegant environment. As such, electrocatalytic cleavage of C−C(O) in β-O-4 model molecules of lignin to value-added chemicals has received much attention in recent years. This mini-review introduces various anodes (e.g., Pb, Pt, Ni, Co., and Ir) developed for electro-oxidative lignin degradation (EOLD) under mild conditions. Attention was placed to understand the conversion pathways and involved reaction mechanisms during EOLD, with emphasis on the product distribution caused by different electrodes.

Application of lead oxide electrodes in wastewater treatment: A review

Electrochemical oxidation (EO) based on hydroxyl radicals (·OH) generated on lead dioxide has become a typical advanced oxidation process (AOP). Titanium-based lead dioxide electrodes (PbO₂/Ti) play an increasingly important role in EO. To further improve the efficiency, the structure and properties of the lead dioxide active surface layer can be modified by doping transition metals, rare earth metals, nonmetals, etc. Here, we compare the common preparation methods of lead dioxide. The EO performance of lead dioxide in wastewater containing dyes, pesticides, drugs, landfill leachate, coal, petrochemicals, etc., is discussed along with their suitable operating conditions. Finally, the factors influencing the contaminant removal kinetics on lead dioxide are systematically analysed.

Electrochemical study of a novel high-efficiency PbO2 anode based on a cerium-graphene oxide co-doping strategy: Electrodeposition mechanism, parameter optimization, and degradation pathways

A novel and efficient Ti/SnO₂-Sb/PbO₂-GO-Ce electrode was successfully fabricated based on the co-deposition of Ce ions and graphene oxide (GO) into β-PbO₂ crystals and used as an anode for electrocatalytic oxidation of phenol. The electrodeposition mechanism, parameter optimization, mechanism analysis, and potential degradation pathways were discussed in depth. The co-doping of GO and Ce resulted in the high directional specificity of β(301), orderly and dense grain arrangement of PbO₂ crystals. At the same time, the oxygen evolution potential, •OH generation capacity and lifetime were also improved. The effects of experimental parameters on phenol removal efficiency were evaluated, including the applied current density, electrode gap, supporting electrolyte, initial NaCl concentration, initial pH, and initial phenol concentration. Under the optimal conditions, the removal efficiency of phenol can reach 375.6 g m^-2 h^-1 for 20 min electrolysis, which is about 1.2 times that of the pure PbO₂ electrode. The active oxygen species (•OH, ClO^- and HClO) were important attributes to the degradation of phenol. Additionally, a potential degradation pathway for phenol was proposed. After 10 successive recycles, there was no significant difference of the electro-generated •OH, cell voltage and phenol removal rate, which confirms the stability and admirable reusability of Ti/SnO₂-Sb/PbO₂-GO-Ce electrode.

Atomically Dispersed Pt-N3C1 Sites Enabling Efficient and Selective Electrocatalytic C-C Bond Cleavage in Lignin Models under Ambient Conditions

Selective cleavage of C-C linkages is the key and a challenge for lignin degradation to harvest value-added aromatic compounds. To this end, electrocatalytic oxidation presents a promising technique by virtue of mild reaction conditions and strong sustainability. However, the existing electrocatalysts (traditional bulk metal and metal oxides) for C-C bond oxidative cleavage suffer from poor selectivity and low product yields. We show for the first time that atomically dispersed Pt-N₃C₁ sites planted on nitrogen-doped carbon nanotubes (Pt₁/N-CNTs), constructed via a stepwise polymerization-carbonization-electrostatic adsorption strategy, are highly active and selective toward C_α-C_β bond cleavage in β-O-4 model compounds under ambient conditions. Pt₁/N-CNTs exhibits 99% substrate conversion with 81% yield of benzaldehyde, which is exceptional and unprecedented compared with previously reported electrocatalysts. Moreover, Pt₁/N-CNTs using only 0.41 wt % Pt achieved a much higher benzaldehyde yield than those of the state-of-the-art bulk Pt electrode (100 wt % Pt) and commercial Pt/C catalyst (20 wt % Pt). Systematic experimental investigation together with density functional theory (DFT) calculation suggests that the superior performance of Pt₁/N-CNTs arises from the atomically dispersed Pt-N₃C₁ sites facilitating the formation of a key C_β radical intermediate, further inducing a radical/radical cross-coupling path to break the C_α-C_β bond. This work opens up opportunities in lignin valorization via a green and sustainable electrochemical route with ultralow noble metal usage.

Greener Routes to Biomass Waste Valorization: Lignin Transformation Through Electrocatalysis for Renewable Chemicals and Fuels Production

Lignin valorization is essential for biorefineries to produce fuels and chemicals for a sustainable future. Today's biorefineries pursue profitable value propositions for cellulose and hemicellulose; however, lignin is typically used mainly for its thermal energy value. To enhance the profit potential for biorefineries, lignin valorization would be a necessary practice. Lignin valorization is greatly advantaged when biomass carbon is retained in the fuel and chemical products and when energy quality is enhanced by electrochemical upgrading. Though lignin upgrading and valorization are very desirable in principle, many barriers involved in lignin pretreatment, extraction, and depolymerization must be overcome to unlock its full potential. This Review addresses the electrochemical transformation of various lignins with the aim of gaining a better understanding of many of the barriers that currently exist in such technologies. These studies give insight into electrochemical lignin depolymerization and upgrading to value-added commodities with the end goal of achieving a global low-carbon circular economy.

Electrochemical Lignin Conversion

Lignin is the largest source of renewable aromatic compounds, making the recovery of aromatic compounds from this material a significant scientific goal. Recently, many studies have reported on lignin depolymerization and upgrading strategies. Electrochemical approaches are considered to be low cost, reagent free, and environmentally friendly, and can be carried out under mild reaction conditions. In this Review, different electrochemical lignin conversion strategies, including electrooxidation, electroreduction, hybrid electro-oxidation and reduction, and combinations of electrochemical and other processes (e. g., biological, solar) for lignin depolymerization and upgrading are discussed in detail. In addition to lignin conversion, electrochemical lignin fractionation from biomass and black liquor is also briefly discussed. Finally, the outlook and challenges for electrochemical lignin conversion are presented.

A 2.5D Electrode System Constructed of Magnetic Sb–SnO2 Particles and a PbO2 Electrode and Its Electrocatalysis Application on Acid Red G Degradation

A novel electrode consisting of a Ti/PbO2 shell and Fe3O4/Sb–SnO2 particles was developed for electrochemical oxidation treatment of wastewater. Scanning electron microscope (SEM), X-ray diffraction (XRD), the current limiting method, toxicity experiments, and high-performance liquid chromatography were adopted to characterize its morphology, crystal structure, electrochemical properties, the toxicity of the wastewater, and hydroxyl radicals. Acid Red G (ARG), a typical azo dye, was additionally used to test the oxidation ability of the electrode. Results indicated that the 2.5D electrode could significantly improve the mass transfer coefficient and •OH content of the 2D electrode, thereby enhancing the decolorization, degradation, and mineralization effect of ARG, and reducing the toxicity of the wastewater. The experiments revealed that, at higher current density, lower dye concentration and higher temperature, the electrochemical oxidation of ARG favored. Under the condition of 50 mA/cm2, 25 °C, and 100 ppm, the ARG, Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) removal efficiency reached 100%, 65.89%, and 52.52%, respectively, and the energy consumption and the current efficiency were 1.06 kWh/g COD, 8.29%, and energy consumption for TOC and mineralization current efficiency were 3.81 kWh/g COD, 9.01%. Besides, the Fe3O4/Sb–SnO2 particles after electrolysis for 50 h still had remarkable stability. These results indicated that the ARG solution could be adequately removed on the 2.5D electrode, providing an effective method for wastewater treatment.

Effect of coating method on the structure and properties of a novel PbO2 anode for electrochemical oxidation of Amaranth dye

This study deals with the electrochemical degradation of Amaranth in aqueous solution by means of stainless steel (SS) electrodes coated with a SiO_x interlayer deposited by Plasma Enhanced Chemical Vapour Deposition and a modified PbO₂ top layer deposited by continuous galvanostatic electrodeposition. The morphological characterization of the PbO₂ top-layer performed by Field Emission Scanning Electron Microscope put in evidence that the SiO_x, interlayer allows obtaining a more integrated PbO₂/SS electrode with a very homogeneous PbO₂ film. The composition of the lead oxide layer was investigated by X-ray Diffractometry, showing that the β-PbO₂/α-PbO₂ ratio in the top layer deposited on the SiO_x film was four times higher respect to the one deposited directly on the stainless steel surface. In addition, the electrochemical behaviour of SS/SiO_x/PbO₂ interfaces was studied by electrochemical impedance spectroscopy (EIS). The EIS results showed that the presence of SiO_x favors electron transfer within the oxide layer which improves electro-oxidation capability. Moreover, bulk electrolysis showed that over 100% colour removal and 84% COD removal, using SS/SiO_x/PbO₂ at acidic pH were reached after 300 min. High Performance Liquid Chromatography analysis was used for the quantitative determinations of initial Amaranth dye molecule removal and to evaluate its specific degradation rate. In order to evaluate the phototoxicity of treated solution with different by-products, different tests of germination were performed and proved that the electrochemical treatment with modified PbO₂ could be as an efficient technology for reducing hazardous wastewater toxicity and able to produce water available for reuse.

Magnetic Assembled Anode Combining PbO2 and Sb-SnO2 Organically as An Effective and Sustainable Electrocatalyst for Wastewater Treatment with Adjustable Attribution and Construction

A new electrode consisting of a Ti/PbO₂ shell as main electrode (ME) and numerous Fe₃O₄/Sb-SnO₂ granules as auxiliary electrodes (AEs) was developed for flexible electrochemical oxidation (EO) treatment of wastewater. Material and electrochemical characterizations were carried out to study the impacts of the loading amount of the AEs on the attribution and construction of the electrode. Lignin, a complex group of polymeric macromolecules, was selected as the representative actual contaminant to test the real EO capability of the assembled electrodes with different AE loading amounts. The stability and recyclability of the electrodes were also investigated. Results showed that the roughness and the surface area of the electrode were increased with the increased loading amount of AEs, while improvement of the electrode properties was achieved only with the appropriate amounts of AEs. The optimum AE loading (such as 0.25 and 0.5 g on 6 cm² ME) boosted the EO performance of the anode toward lignin by ∼20%, making the electrode more capable in benzene ring opening. Excessive AEs were found to be unavailing, which only increased the percentage of the less accessible catalytic active sites. Moreover, a preliminary operating mechanism of this 2.5D electrode was proposed to evaluate the effect of AEs and further reveal the relationships of structure and activity of the 2.5D electrode. Finally, the electrode's lifetime was lengthened and further boosted via loading AEs and the subsequent recycling of AEs.

Hydrophobic networked PbO2 electrode for electrochemical oxidation of paracetamol drug and degradation mechanism kinetics

A hydrophobic networked PbO₂ electrode was deposited on mesh titanium substrate and utilized for the electrochemical elimination towards paracetamol drug. Three dimensional growth mechanism of PbO₂ layer provided more loading capacity of active materials and network structure greatly reduced the mass transfer for the electrochemical degradation. The active electrochemical surface area based on voltammetric charge quantity of networked PbO₂ electrode is about 2.1 times for traditional PbO₂ electrode while lower charge transfer resistance (6.78 Ω cm²) could be achieved on networked PbO₂ electrode. The electrochemical incineration kinetics of paracetamol drug followed a pseudo first-order behavior and the corresponding rate constant were 0.354, 0.658 and 0.880 h^-1 for traditional, networked PbO₂ and boron doped diamond electrode. Higher electrochemical elimination kinetics could be achieved on networked PbO₂ electrode and the performance can be equal to boron doped diamond electrode in result. Based on the quantification of reactive oxidants (hydroxyl radicals), the utilization rate of hydroxyl radicals could reach as high as 90% on networked PbO₂ electrode. The enhancement of excellent electrochemical oxidation capacity towards paracetamol drug was related to the properties of higher loading capacity, enhanced mass transfer and hydrophobic surface. The possible degradation mechanism and pathway of paracetamol on networked PbO₂ electrode were proposed in details accordingly based on the intermediate products.

Electrocatalytic degradation of rice straw lignin in alkaline solution through oxidation on a Ti/SnO2–Sb2O3/α-PbO2/β-PbO2 anode and reduction on an iron or tin doped titanium cathode

A novel procedure for selective production of biomass-based compounds by electrochemical conversion has been developed in this work.