Sulfuric acid doped poly diaminopyridine/graphene composite to remove high concentration of toxic Cr(VI)

Remediation of Hg-Contaminated Groundwater via Adsorption on Supramolecular Polymers in Batch Process and Column Test

Mercury contamination in groundwater seriously affects human health and ecosystem security. The remediation of Hg-contaminated groundwater remains a challenging task. The applicability of an as-synthesized supramolecular polymer (SP) for low-concentration mercury in a high-salinity groundwater matrix has been verified through a batch process and column test. The remediation of mercury-contaminated groundwater, particularly in complex high-salinity environments, represents a significant and enduring challenge in environmental science. The batch test study demonstrated that the SP can efficiently adsorb Hg from groundwater with superior selectivity and a high uptake capacity (up to 926.1 ± 165.3 mg g-1). Increasing the pH and dissolved organic matter (DOM) and reducing the ionic strength can facilitate Hg adsorption; the coexistence of heavy metal ions slightly weakens the removal. In terms of its performance as a permeable reactive barrier, the SP can intercept Hg in flowing groundwater with a capacity of up to 3187 mg g-1. A low influent mercury concentration, low pore velocity, and high SP dosage can effectively extend the breakthrough time in column tests. Additionally, the Yan model (R2 = 0.960-0.989) can accurately depict the whole dynamic interception process (150 PVs) of SPs in a fixed column, and the Adams-Bohart model (R2 = 0.916-0.964) describes the initial stage (≤35 PVs) well. Considering the functional group in the SP and the Hg species in groundwater, complexation, electrostatic attraction, ion exchange, and precipitation/co-precipitation are the plausible mechanisms for mercury removal based on the characterization results of scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectrometer (FT-IR). These impressive features render the SP a promising candidate for the remediation of trace Hg in saline groundwater using permeable reactive barrier (PRB) technology.

Processes and mechanisms in remediation of aqueous chromium contamination by sulfidated nano-scale zerovalent iron (S-nZVI): Experimental and computational investigations

Sulfidated nano-scale zerovalent iron (S-nZVI) has emerged as an advanced functional nanomaterial for efficiently remediating Cr(VI) contamination in aqueous environments. However, there is an insufficient understanding of its coherent process, removal pathway, and hydrochemical reactive mechanisms, presenting potential challenges for its future environmental applications. To address this gap, this study successfully synthesized S-nZVI through a chemical precipitation method and effectively applied it for the removal of Cr(VI). Additional characterization revealed that the removal of Cr(VI) followed a sequence of rapid chemisorption and intraparticle diffusion processes, concomitant with an increase in pH and a decrease in oxidation-reduction potential. The remediation mechanism encompassed a synergistic reduction of Cr(VI) to Cr(III) and simultaneous immobilization via Cr2FeO4 coprecipitation. The highest Cr(VI) removal capacity of 75 mg/g was attained during dynamic removal experiments in the sand column packed with S-nZVI. Further computational analysis, employing density functional theory calculations based on the experimental data, revealed the involvement of multiple molecular orbitals of Cr(VI) in the removal process. It also elucidated a step-by-step reduction pathway for Cr(VI) characterized by decreasing free energy. These findings provide evidence-based insights into Cr(VI) remediation using S-nZVI and can serve as valuable technical support for future environmental management of heavy metals.

Iron-lanthanum supported on graphite sheets for As(III) removal from aqueous solution: kinetics, thermodynamic and ecotoxicity assessment

Graphene-based material is widely used to remove arsenic from water due to its layered structure with high surface area. Here, we have successfully synthesized Fe-La bimetallic modified graphite sheet materials to more efficiently remove As(III) from aqueous solution. The results showed that Fe-La-graphite sheets (FL-graphite sheets) have a larger specific surface area (194.28 m2·g-1) than graphite sheets (2.80 m2·g-1). The adsorption capacity of FL-graphite sheets for As(III) was 51.69 mg·g-1, which was higher than that of graphite sheets (21.91 mg·g-1), La-graphite sheets (26.06 mg·g-1), and Fe-graphite sheets (40.26 mg·g-1). The FL-graphite sheets conformed to the Freundlich and Dubinin-Radushkevich isotherm, and the maximum adsorption capacity was 53.62 mg·g-1. The removal process obeys intra-particle diffusion and pore diffusion for As(III). The results of batch adsorption experiments and characterization analyses demonstrated that oxidation, ligand exchange, and inner sphere complexation mechanisms involved in the adsorption of FL-graphite sheets to As(III) in comparison with graphite sheets. In addition, electrostatic attraction mechanism was found vital in the adsorption. Ecotoxicity assessment revealed that FL-graphite sheets have little influence on rice germination and growth, but reduced the toxicity of As(III) to rice. Therefore, the FL-graphite sheets have good practical application value in purifying As(III) polluted water with litter ecotoxicity.

Design of cryogel based CNTs-anchored polyacrylonitrile honeycomb film with ultra-high S-NZVI incorporation for enhanced synergistic reduction of Cr(VI)

An ultra-high NZVI-loaded PAN film (S-CPN) with a unique 3D honeycomb structure was designed based on the cryogel method of green solvent-induced pores and confinement of the spatially free conformation of films by anchoring carbon nanotubes (CNTs), supplemented sulfidation for removing hexavalent chromium (Cr(VI)), and characterized by SEM, AFM, BET, XRD, XPS, and electrochemical corrosion. The doping amounts of the compounds for S-CPN synthesis were optimized to be 0.075 g CNTs, 0.25 g Na₂S, and 0.3 M FeSO₄. S-CPN possessed a 175.247 m²/g specific surface area, -0.365 V reduction potential, and 46.54 mg/g ultra-high NZVI-loading. S-CPN had the strong activity of Cr(VI) removal and tolerance to coexisting ions. The removal efficiency remained at 80 % after age for 30 days or 5 cycles. The pseudo-first-order kinetics and Langmuir model were more favorable to simulate the adsorption of Cr(VI) on S-CPN. The thermodynamics show that S-CPN removing Cr(VI) was a spontaneous exothermic reaction. The reasons for these excellent properties were that CNTs improve the film porosity and ultra-high NZVI-loading, and synergistic the FeS_X layer to chelates-reduces Cr(VI). This was the first time that honeycomb film with 3D structure and potential applications in heavy metal removal was developed via an eco-friendly strategy.

Synthesis of polydopamine modified MgAl-LDH for high efficient Cr(VI) removal from wastewater

A highly efficient absorbent was developed in this study by modifying polydopamine film on Mg-Al layered double hydroxide (PDA/MgAl-LDH) to remove Cr(VI) from wastewater. The characterization results showed that the polydopamine film was successfully coated on the MgAl-LDH surface. The preparation ratio, pH, and adsorbent dosage influencing absorption by PDA/MgAl-LDH were systematically investigated. The absorption capacity of Cr(VI) by PDA/MgAl-LDH was 87 mg/g. The equilibrium adsorption isotherm of PDA/MgAl-LDH was in good agreement with that of the Langmuir model. Therefore, the pseudo-second-order kinetic model is suitable for describing adsorption kinetics. The interaction between PDA and Cr(VI) and Cr(III) was investigated using density generalized function theory (DFT), which demonstrated that the PDA amino group could provide electrons for Cr(VI) reduction. Hydrogen and covalent bonding were dominant during the chemisorption process of PDA absorbing Cr(VI), the nitrogen of 5,6-dihydroxyindole was the primary active site for absorbing Cr(III), and electrostatic attraction was mainly responsible for Cr(III) absorption. Therefore, PDA/MgAl-LDH has the potential to adsorb and remove Cr(VI) from wastewater.

Polyacrylonitrile/Aminated Polymeric Nanosphere Nanofibers as Efficient Adsorbents for Cr(VI) Removal

In this work, polyacrylonitrile/aminated polymeric nanosphere (PAN/APN) nanofibers were prepared by electrospinning of monodispersed aminated polymeric nanospheres (APNs) for removal of Cr(VI) from aqueous solution. Characterization results showed that obtained PAN/APNs possessed nitrogen functionalization. Furthermore, the adsorption application results indicated that PAN/APN nanofibers exhibited a high adsorption capacity of 556 mg/g at 298 K for Cr(VI) removal. The kinetic data showed that the adsorption process fits the pseudo-second order. A thermodynamic study revealed that the adsorption of Cr(VI) was spontaneous and endothermic. The coexisting ions Na⁺, Ca²⁺, K⁺, Cl⁻, NO₃⁻ and PO₄³⁻ had little influence on Cr(VI) adsorption, while SO₄²⁻ in solution dramatically decreased the removal performance. In the investigation of the removal mechanism, relative results indicated that the adsorption behavior possibly involved electrostatic adsorption, redox reaction and chelation. PAN/APN nanofibers can detoxify Cr(VI) to Cr(III) and subsequently chelate Cr(III) on its surface. The unique structure and nitrogen functionalization of PAN/APN nanofibers make them novel and prospective candidates in heavy metal removal.

Efficient removal of aqueous Cr(VI) with ferrous sulfide/N-doped biochar composites: Facile, in-situ preparation and Cr(VI) uptake performance and mechanism

FeS nanoparticles loaded on nitrogen-doped biochar (FeS/BNC) were fabricated by pyrolyzing coffee husks pretreated with Mohr's salt. The nitrogen doping and FeS loading of biochar are simultaneously achieved in one-pot pyrolysis. The elemental analysis, SEM, TEM, XRD, XPS, Raman, FTIR and N₂ adsorption-desorption technologies were used to characterize the composition and structure of FeS/NBC. The appraisement for removing aqueous Cr(VI) testified that FeS/NBC offered a synergistic scavenging effect of Cr(VI) by FeS and NBC. The effect of crucial experimental conditions (FeS/NBC dosage, foreign ions, initial pH and concentration of Cr(VI) solution) were investigated. The Cr(VI) removal capacity was as high as 211.3 ± 26 mg g^-1 under the optimized condition. The practicability of FeS/NBC was examined by using simulated actual samples from tap water and lake water. The mechanism examination showed that surface adsorption/reduction and solution reduction were implicated in the removal of Cr(VI). The current work introduces a novel FeS/NBC composite prepared by an in situ pyrolysis method with excellent potential for chromium pollution remediation.

Assessing environmental fate of hexavalent chromium as influenced by fractionation of ferrihydrite with dissolved organic matter

The dynamic interactions among iron (Fe) oxides, dissolved organic matter (DOM) and toxic trace metals play crucial roles in risk assessment and environmental remediation. Although the inhibitory effects of DOM on the iron oxides transformation process have been studied previously, there is still a lack of mechanistic and quantitative understanding on the kinetics of Cr(VI) and ferrihydrite transformation in the present of DOM. In this study, we investigated the fractionation process of DOM on ferrihydrite and its influence on the fate of Cr(VI) and transformation of ferrihydrite. The result of three-dimension excitation emission matrix (3D-EEM), Q-Exactive LC-MS/MS, X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) indicated that fulvic acid-like compounds of DOM were the mainly fractionated compounds on the surface of ferrihydrite, which further inhibited the transformation of ferrihydrite. Besides, bracewellite (CrO(OH)) generated as an accompanied mineral during the transformation of ferrihydrite in the present of Cr(VI). Based on the DFT theoretical calculation, we concluded that Cr(VI) mainly in the form of HCr O₄^- was more inclined to be adsorbed on iron-oxide tetrahedron by inner-sphere monodentate mononuclear configurations. The findings on the dynamic coupling among Fe oxide transformation and Cr(VI) sequestration under the effect of DOM provided the basis for accurately predicting the fate of trace elements and iron mineral.

A novel preparation of S-nZVI and its high efficient removal of Cr(VI) in aqueous solution

The chitosan-stabilized biochar supported S-nZVI (CS@BC/S-nZVI) composite with low aggregation and superior antioxidation were successfully synthesized by liquid-phase reduction method for the outstanding removal of Cr(VI) from wastewater and characterized by SEM, BET, FTIR, XRD, and XPS. The optimized synthesis parameters of CS@BC/S-nZVI were determined as a 0.14 molar ratio of S/Fe and a 0.25 mass ratio of BC/Fe. The CS@BC/S-nZVI possessed a specific surface area of 199.246 m²/g and an average pore size and pore volume of 1.186 nm and 0.272 cc/g. The CS@BC/S-nZVI could remain reductive activity after Cr(VI) removal and present a remarkable tolerance to the coexisting ions during Cr(VI) removal. The adsorption data were fitted well by the pseudo-second order model and the Langmuir model. The removal of Cr(VI) by CS@BC/S-nZVI was an exothermic process with prominent Cr(VI) removal capacities of 244.07 mg/g at 120 min and 221.84 mg/g at 15 min at 25 ℃. Further mechanism analysis proved that the binding of Cr(VI) to CS@BC/S-nZVI was mainly a synergistic effect of reduction and electrostatic attraction. Overall, these findings shed new light on the research of a novel S-nZVI compound and revealed the potential practical application of CS@BC/S-nZVI in the future heavy metal removal from wastewater.

Effects of oxalate and citrate on the behavior and redistribution of Cr(VI) during ferrihydrite-Cr(VI) co-precipitates transformation

Understanding the influence of organic matters on the fate of Cr(VI) during ferrihydrite-Cr(VI) (Fh-Cr) co-precipitates transformation helps to study the retention of Cr(VI) by iron oxides in the environment. In this paper, Fh-Cr was prepared by co-precipitation and the redistribution of Cr(VI) in the oxalate or citrate system during the transformation of Fh-Cr was studied. X-ray diffraction, Fourier transform infrared spectroscopy, Transmission electron microscopy, and X-ray photoelectron spectroscopy were used to characterize Fh-Cr for aging 7 days at 70 °C. Results showed that both oxalate and citrate could hinder the release of Cr(VI) from Fh-Cr and abate the harm of Cr(VI). Oxalate improved the transformation from Fh-Cr to hematite and promoted Cr(VI) to be enfolded into the secondary minerals to further immobilize Cr at initial pH of 5.0 and 7.0, while citrate evidently reduced the release of Cr(VI) through stabilizing Fh-Cr at initial pH of 9.0. Besides, reduction of Cr(VI) by oxalate and citrate was through forming the surface complexes that promoted electron transfer from oxalate or citrate to Cr(VI), which can effectively abate the harm of Cr(VI). The findings of this study can promote understanding of the influences of organic matters on Cr(VI) immobilization during transformation of iron oxides in nature.

Bioreduction of hexavalent chromium on goethite in the presence of Pseudomonas aeruginosa

The effective mineral absorption and bioreduction were considered as two preferred processes to alleviate the bioavailability and toxicity of toxic trace metals. In this study, the bioreduction of hexavalent chromium (Cr(VI)) on goethite (FeOOH) in the presence of Pseudomonas aeruginosa (P. aeruginosa) was investigated with different environmental factors, including carbon source concentrations, pH, temperature and initial Cr(VI) concentrations. The characterization of FeOOH-P. aeruginosa indicated that P. aeruginosa was surrounded by FeOOH, which could provide the essential iron for bacterial growth and reduce Cr(VI) to Cr(III). The optimal experimental conditions for Cr(VI) (initial concentration: 35 mg L^-1) absorption (∼46%) and bioreduction (∼54%) involved a temperature of 45 °C and pH of 5.5. Meanwhile, extracellular polymeric substances (EPS) secreted by P. aeruginosa and its functional groups played important roles in the reduction of Cr(VI). They could reduce Cr(VI) to Cr(III) and transform to Cr(OH)₃ or Fe_x-Cr_(1-x)(OH)₃ precipitation. These results of this study are of significant importance to better understand the environmental geochemical behavior of Cr(VI) with the interactions between soil minerals and microorganisms.

Behaviors and fate of adsorbed Cr(VI) during Fe(II)-induced transformation of ferrihydrite-humic acid co-precipitates

The mobility of Cr(VI) in the environment is affected by the transformation of ferrihydrite (Fh) and ferrihydrite-humic acid co-precipitates (Fh-HA). However, the impacts of Fe(II)-induced transformation of Fh and Fh-HA on the mobility, speciation and partitioning of associated Cr(VI) remain unclear. In this study, the behaviors of adsorbed Cr(VI) during Fh and Fh-HA aging at 70 °C for 9 days (pH₀ = 3.0 and 7.0) in the absence and presence of Fe(II) were studied. Results revealed that the main speciation of Cr(VI) after transformation was non-desorbable Cr and its formation involved the following pathways. Firstly, Fe(II) (0.2 and 2.0 mM) induced the transformation of Fh-HA to hematite and goethite, promoting the structural incorporation of adsorbed Cr into hematite and goethite via complexation. Secondly, under neutral condition (pH₀ = 7.0), the low concentration of Fe(II) (0.2 mM) could not reduce completely Cr(VI) to Cr(III) and thus residual Cr(VI) was incorporated into the Cr(III)-Fe(III) co-precipitates. Thirdly, coprecipitated humic acid not only reduced Cr(VI) to Cr(III) via polysaccharide, but also formed complexes with incorporated Cr through carboxylic groups to sequester Cr. Our results demonstrate that Fe(II)-induced transformation of Fh-HA exerts major influences on associated Cr(VI) speciation and partitioning.

Magnetic supramolecular polymer: Ultrahigh and highly selective Pb(II) capture from aqueous solution and battery wastewater

For the practical capture of heavy metal ions from wastewater, fabricating environmental friendly adsorbents with high stability and super adsorption capacity are pursuing issue. In this work, we develop magnetic supramolecular polymer composites (M-SMP) by using a simple two-step hydrothermal method. Systematical characterizations of morphological, chemical and magnetic properties were conducted to confirm the formation of M-SMP composites. The resulting M-SMP composites were applied to remove Pb(II) from aqueous solution and from real battery wastewater, and easy separation was achieved using a permanent magnet. By investigating the effects of various parameters, we optimized their operating condition for Pb(II) adsorption by the M-SMP. The uptake of Pb(II) onto M-SMP fitted well the pseudo-second-order and Langmuir isotherm models, and favourable thermodynamics showed a spontaneous endothermic process. The SMP endowed M-SMP with ultrahigh adsorption capacity for Pb(II) (946.9 mg g^-1 at pH = 4.0, T = 298 K), remarkable selectivity, satisfactory stability and desirable recyclability. In Pb-contaminated lead-acid battery industrial wastewater, the concentration of Pb(II) declined from 18.070 mg L^-1 to 0.091 mg L^-1, which meets the current emission standard for the battery industry. These merits, combined with simple synthesis and convenient separation, make M-SMP an outstanding scavenger for the elimination of industrial Pb(II) wastewater.

Recent Advances in Applications of Hybrid Graphene Materials for Metals Removal from Wastewater

The presence of traces of heavy metals in wastewater causes adverse health effects on humans and the ecosystem. Adsorption is a low cost and eco-friendly method for the removal of low concentrations of heavy metals from wastewater streams. Over the past several years, graphene-based materials have been researched as exceptional adsorbents. In this review, the applications of graphene oxide (GO), reduce graphene oxide (rGO), and graphene-based nanocomposites (GNCs) for the removal of various metals are analyzed. Firstly, the common synthesis routes for GO, rGO, and GNCs are discussed. Secondly, the available literature on the adsorption of heavy metals including arsenic, lead, cadmium, nickel, mercury, chromium and copper using graphene-based materials are reviewed and analyzed. The adsorption isotherms, kinetics, capacity, and removal efficiency for each metal on different graphene materials, as well as the effects of the synthesis method and the adsorption process conditions on the recyclability of the graphene materials, are discussed. Finally, future perspectives and trends in the field are also highlighted.

In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

The efficient removal of heavy metals from aqueous environment is imperative and challenging. A novel ternary composite constructed of diaminopyridine polymers, graphene oxide, and ferrite magnetic nanoparticles was designed by a facile in situ polymerization strategy for the removal of Pb(II) from aqueous solution. Detailed characterization of morphological, chemical, and magnetic properties was employed systematically to confirm the formation of the composite material. Batch adsorption experiment studies suggested that the composite was an excellent adsorbent for Pb(II) which was easily collected after use via exposure to an external magnetic field for 30 s. The effects of different parameters such as solution pH, adsorbent dosage, contact time, initial Pb(II) concentration, temperature, and co-existing ions were examined. The maximum adsorption capacity at pH = 5 was estimated to be 387.2 mg g^-1 at 298 K by the Langmuir isotherm model, accompanied by favorable adsorption recyclability according to the investigation of regeneration experiments. Thermodynamic studies revealed that the Pb(II) adsorption via our ternary composite was endothermic and spontaneous. The corresponding removal performance for effluent containing Pb(II) from the battery industry was successfully examined. The present results indicated that our designed adsorbent is beneficial to the practical Pb(II) removal in wastewater purification.

Surface functional groups of carbon-based adsorbents and their roles in the removal of heavy metals from aqueous solutions: A critical review

Carbon-based adsorbents such as graphene and its derivatives, carbon nanotubes, activated carbon, and biochar are often used to remove heavy metals from aqueous solutions. One of the important aspects of effective carbon adsorbents for heavy metals is their tunable surface functional groups. To promote the applications of functionalized carbon adsorbents in heavy metal removal, a systematic documentation of their syntheses and interactions with metals in aqueous solution is crucial. This work provides a comprehensive review of recent research on various carbon adsorbents in terms of their surface functional groups and the associated removal behaviors and performances to heavy metals in aqueous solutions. The governing removal mechanisms of carbon adsorbents to aqueous heavy metals are first outlined with a special focus on the roles of surface functional groups. It then summarizes and categorizes various synthesis methods that are commonly used to introduce heteroatoms, primarily oxygen, nitrogen, and sulfur, onto carbon surfaces for enhanced surface functionalities and sorptive properties to heavy metals in aqueous solutions. After that, the effects of various functional groups on adsorption behaviors of heavy metals onto the functionalized carbon adsorbents are elucidated. A perspective of future work on functional carbon adsorbents for heavy metal removal as well as other potential applications is also presented at the end.

Facile modification of nanoscale zero-valent iron with high stability for Cr(VI) remediation

In this study, a highly stable nanoscale zero-valent iron composite (HS-NZVI) was obtained via modifying nanoscale zero-valent iron (NZVI) with tetraethyl orthosilicate (TEOS) and hexadecyltrimethoxysilane (HDTMOS), and used for Cr(VI) remediation in aqueous solution. The obtained HS-NZVI remained stable in water without being oxidized for over 12h. After four consecutive runs, the Cr(VI) removal efficiency of HS-NZVI maintained a value of more than 82%. Moreover, the Cr(VI) removal capacity per unit weight of NZVI in HS-NZVI reached 292.8mg/g within 60min at the initial Cr(VI) concentration of 120mg/L at pH5. The Cr(VI) removal efficiency of HS-NZVI increased with decreasing solution pH, and the experimental data for Cr(VI) removal by HS-NZVI were well-described by the pseudo-first-order reaction model. Additionally, scanning electron microscope (SEM) images, X-ray diffraction (XRD) patterns and X-ray photoelectron spectroscopy (XPS) measurements of the product after reaction revealed that the mechanism of Cr(VI) remediation by HS-NZVI mainly involved adsorption, reduction and co-precipitation. Considering the advantages of easy preparation, excellent stability and reusability, and high Cr(VI) removal capacity as well as the magnetic recovery property, HS-NZVI is expected to have notably promising applications for the remediation of Cr(VI) contaminated sites.

A Schiff base/quaternary ammonium salt bifunctional graphene oxide as an efficient adsorbent for removal of Th(IV)/U(VI)

A novel approach for facile covalent functionalization of graphene oxide (GO) was proposed in the present study in order to effectively avoid necessary anhydrous conditions and the usage of harsh reagents during the chemical functionalization of GO. Herein, a GO derivative that was functionalized with a primary amine derivative bearing a positively charged quaternary ammonium group, GO-S, was synthesized through a Schiff base condensation reaction between the amine groups of the primary amine derivative and the aldehyde groups of GO. The introduction of the quaternary ammonium groups can prevent GO from stacking and improve the dispersibility of GO after modification. The formation of imine bonds (NCH) between the primary amine and GO has been confirmed by Fourier transform infrared and X-ray photoelectron spectroscopy. The GO-S demonstrated good dispersion stability in aqueous medium and also exhibited better adsorption performance than GO for Th(IV) and U(VI), with a maximum thorium adsorption capacity of 2.22mmol/g and a maximum uranium adsorption capacity of 0.83mmol/g, suggesting a great potential for the application of graphene oxide-based materials for facilitating the removal of Th(IV) and U(VI) from nuclear waste solutions.

Facile preparation of magnetic mesoporous MnFe2O4@SiO2-CTAB composites for Cr(VI) adsorption and reduction

Chromium-contaminated water is regarded as one of the biggest threats to human health. In this study, a novel magnetic mesoporous MnFe₂O₄@SiO₂-CTAB composite was prepared by a facile one-step modification method and applied to remove Cr(VI). X-ray diffraction, scanning electron microscopy, transmission electron microscopy, specific surface area, and vibrating sample magnetometer were used to characterize MnFe₂O₄@SiO₂-CTAB composites. The morphology analysis showed that the composites displayed a core-shell structure. The outer shell was mesoporous silica with CTAB and the core was MnFe₂O₄ nanoparticles, which ensured the easy separation by an external magnetic field. The performance of MnFe₂O₄@SiO₂-CTAB composites in Cr(VI) removal was far better than that of bare MnFe₂O₄ nanoparticles. There were two reasons for the effective removal of Cr(VI) by MnFe₂O₄@SiO₂-CTAB composites: (1) mesoporous silica shell with abundant CTA⁺ significantly enhanced the Cr(VI) adsorption capacity of the composites; (2) a portion of Cr(VI) was reduced to less toxic Cr(III) by MnFe₂O₄, followed by Cr(III) immobilized on MnFe₂O₄@SiO₂-CTAB composites, which had been demonstrated by X-ray photoelectron spectroscopy results. The adsorption of Cr(VI) onto MnFe₂O₄@SiO₂-CTAB followed the Freundlich isotherm model and pseudo-second-order model. Tests on the regeneration and reuse of the composites were performed. The removal efficiency of Cr(VI) still retained 92.4% in the sixth cycle. MnFe₂O₄@SiO₂-CTAB composites exhibited a great potential for the removal of Cr(VI) from water.

Pyridine-based functionalized graphene oxides as a new class of corrosion inhibitors for mild steel: an experimental and DFT approach

Two functionalized graphene oxides, diazo pyridine functionalized graphene oxide and diamino pyridine functionalized graphene oxide, were synthesised and evaluated as corrosion inhibitors on mild steel in 1 M hydrochloric acid.

Graphene Oxide Attenuates the Cytotoxicity and Mutagenicity of PCB 52 via Activation of Genuine Autophagy

Graphene oxide (GO), owing to its large surface area and abundance of oxygen-containing functional groups, is emerging as a potential adsorbent for polychlorinated biphenyls (PCBs), which accumulate over time and are harmful to both natural ecosystems and human health. However, the effect of GO against PCB-induced toxicity remains largely unexplored. The present study aimed to investigate the protective effect of GO against PCB 52 induced cytotoxic and genotoxic response in mammalian cells at various exposure conditions and clarify the protective role of autophagy. Pretreatment with GO dramatically decreased PCB 52 induced cytotoxicity and CD59 gene mutation in human-hamster hybrid (AL) cells. The toxic response in cells either pretreated with PCB 52 and then treated with GO or concurrently treated with GO and PCB 52 did not differ significantly from the toxic response in the cells treated with PCB 52 alone. Using autophagy inhibitors (3-methyladenine and wortmannin) and inducers (trehalose and rapamycin), we found that genuine autophagy induced by GO was involved in decreasing PCB 52 induced toxicity. These findings suggested that GO has an antagonistic effect against the toxicity of PCB 52 mainly by triggering a genuine autophagic process, which might provide new insights into the potential application of GO in PCB disposal and environmental and health risk assessment.

Morphology-dependent enhancement of template-guided tunable polyaniline nanostructures for the removal of Cr(vi)

Three nanostructured polyanilines (PANIs) with different morphologies, including nanofibers, nanotubes and nanosheets, have been successfully synthesized using MnO₂ with tunable morphologies as the reactive templates.

Calixarene-functionalized graphene oxide composites fixed on glassy carbon electrodes for electrochemical detection

Four composite materials were prepared by grafting calixarene derivatives onto the surfaces of graphene oxide (GO) via covalent functionalization to yield covalently functionalized graphene oxides (CFGOs).

Calixarene-functionalized graphene oxide composites for adsorption of neodymium ions from the aqueous phase

Calixarene-functionalized graphene oxide (GO) composites were synthesized via esterification and polymerization of calix[n]arenes (n = 4, 6, 8) onto graphene oxide surfaces for the first time.

Removal of phosphate and hexavalent chromium from aqueous solutions by engineered waste eggshell

In this work, a novel adsorbent derived from waste eggshell (ES) was used for phosphate and hexavalent chromium adsorption.

Thymine Functionalized Graphene Oxide for Fluorescence "Turn-off-on" Sensing of Hg2+ and I- in Aqueous Medium

Selective detection of either mercury (Hg2+) or iodide (I-) ion using fluorescence turn-on or turn-off processes is an important area of research. In spite of intensive research, simultaneous detection of both mercury and iodide using fluorescence turn-off-on processes, high sensitivity and theoretical support concerning the mechanisms are still lacking. In the present work, graphene oxide is functionalized by thymine to realize simultaneous detection of both Hg2+ and I- selectively using fluorescence turn-off-on mechanism. Ultra high sensitivity to the extent of ppb level exploiting large surface area of graphene is achieved. DFT calculations also assist to realize the detailed mechanisms involving this PL quenching and also its regain during sensing of these ions in aqueous solution.

A critical review on in situ reduction of graphene oxide during preparation of conducting polymeric nanocomposites

In situ reduction of graphene oxide during preparation of conducting polymeric nanocomposites.